Resources

The solubility of calcium sulfate in aqueous solution is governed by the dissolution equilibrium: CaSO4(s)⇌Ca2+(aq)+SO42−(aq)\text{CaSO}_4(s) \rightleftharpoons \text{Ca}^{2+}(aq) + \text{SO}_4^{2-}(aq), with Ksp=4.93×10−5K_{\text{sp}} = 4.93 \times 10^{-5} at 25∘C25^\circ\text{C}. A sample containing 1.50×10−3 mol1.50 \times 10^{-3}\text{ mol} of calcium chloride, CaCl2(s)\text{CaCl}_2(s), is completely dissolved in water and diluted to 500.0 mL500.0\text{ mL} to produce an initial [extCa2+][ ext{Ca}^{2+}] of 3.00×10−3 M3.00 \times 10^{-3}\text{ M}. Determine: (a) the minimum concentration of aqueous sulfate ions, [SO42−(aq)][\text{SO}_4^{2-}(aq)], necessary to cross the physical boundary from an unsaturated homogeneous mixture to the onset of heterogeneous precipitate formation, and (b) state the physical state symbol of CaSO4\text{CaSO}_4 when the ion product quotient Qsp<KspQ_{\text{sp}} < K_{\text{sp}} versus when Qsp>KspQ_{\text{sp}} > K_{\text{sp}}.

Answer and steps

Final answer

(a) [SO42−]=1.64×10−2 M[\text{SO}_4^{2-}] = 1.64 \times 10^{-2}\text{ M}; (b) For Qsp<KspQ_{\text{sp}} < K_{\text{sp}}, the ions remain completely dissolved as (aq)(aq); for Qsp>KspQ_{\text{sp}} > K_{\text{sp}}, solid phase CaSO4(s)\text{CaSO}_4(s) precipitates.

Steps

Part (a): Determining the Minimum [SOX4X2−][\ce{SO4^2-}] for Precipitation

  1. Identify the Equilibrium Expression
    The dissolution equilibrium for calcium sulfate is: CaSOX4(s)⇌CaX2+(aq)+SOX4X2−(aq)\ce{CaSO4(s) <=> Ca^2+(aq) + SO4^2-(aq)} The solubility product expression is: Ksp=[CaX2+][SOX4X2−]K_{\text{sp}} = [\ce{Ca^2+}][\ce{SO4^2-}]
  2. Condition for Precipitation to Begin
    Precipitation starts at the boundary where the ion product quotient QspQ_{\text{sp}} equals the solubility product constant KspK_{\text{sp}}. At this threshold: Ksp=[CaX2+][SOX4X2−]K_{\text{sp}} = [\ce{Ca^2+}][\ce{SO4^2-}]
  3. Calculate the Minimum Sulfate Concentration
    Substitute the given values into the expression: 4.93×10−5=(3.00×10−3 M)⋅[SOX4X2−]4.93 \times 10^{-5} = (3.00 \times 10^{-3}\text{ M}) \cdot [\ce{SO4^2-}]

    Solving for [SOX4X2−][\ce{SO4^2-}]: [SOX4X2−]=4.93×10−53.00×10−3 M≈1.64×10−2 M[\ce{SO4^2-}] = \frac{4.93 \times 10^{-5}}{3.00 \times 10^{-3}\text{ M}} \approx 1.64 \times 10^{-2}\text{ M}

    Therefore, any sulfate concentration exceeding 1.64×10−2 M1.64 \times 10^{-2}\text{ M} will cause precipitation to occur.


Part (b): Physical States Corresponding to QspQ_{\text{sp}} and KspK_{\text{sp}}

  • When Qsp<KspQ_{\text{sp}} < K_{\text{sp}}:
    The solution is unsaturated. The ion concentration product has not reached the solubility limit, so no solid forms. The constituent ions exist entirely dissolved in the aqueous phase, designated by the state symbol (aq)(aq) (i.e., CaX2+(aq)\ce{Ca^2+(aq)} and SOX4X2−(aq)\ce{SO4^2-(aq)}).
  • When Qsp>KspQ_{\text{sp}} > K_{\text{sp}}:
    The solution is supersaturated. The system shifts toward equilibrium by precipitating excess ions out of the liquid phase as a solid precipitate, represented by the state symbol (s)(s) as CaSOX4(s)\ce{CaSO4(s)}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the existing common calcium ion concentration from CaCl₂ and assumes equal stoichiometric molar solubility concentrations x where Ksp = x².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[Ca2+][SO42−]=x2K_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}] = x^2

    Correct

    Ksp=[Ca2+][SO42−]  ⟹  4.93×10−5=(3.00×10−3 M)[SO42−]K_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}] \implies 4.93 \times 10^{-5} = (3.00 \times 10^{-3}\text{ M})[\text{SO}_4^{2-}]

    You correctly wrote the equilibrium expression Ksp=[Ca2+][SO42−]K_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}], but you equated it to x2x^2, which assumes pure salt dissolving in pure water where [Ca2+]=[SO42−][\text{Ca}^{2+}] = [\text{SO}_4^{2-}]. Because CaCl2\text{CaCl}_2 is already dissolved in the solution, [Ca2+][\text{Ca}^{2+}] is fixed at 3.00×10−3 M3.00 \times 10^{-3}\text{ M}.

  2. Step 2

    x=4.93×10−5=7.02×10−3 M  ⟹  [SO42−]=7.02×10−3 Mx = \sqrt{4.93 \times 10^{-5}} = 7.02 \times 10^{-3}\text{ M} \implies [\text{SO}_4^{2-}] = 7.02 \times 10^{-3}\text{ M}

    Correct

    [SO42−]=Ksp[Ca2+]=4.93×10−53.00×10−3 M=1.64×10−2 M[\text{SO}_4^{2-}] = \frac{K_{\text{sp}}}{[\text{Ca}^{2+}]} = \frac{4.93 \times 10^{-5}}{3.00 \times 10^{-3}\text{ M}} = 1.64 \times 10^{-2}\text{ M}

    Your square-root calculation is arithmetically consistent with your x2x^2 assumption, but it yields an incorrect sulfate concentration because it carries forward the error from Step 1.

  3. Step 3

    For Qsp<Ksp:(aq)For Qsp>Ksp:(s)\text{For } Q_{\text{sp}} < K_{\text{sp}}: (aq) \\ \text{For } Q_{\text{sp}} > K_{\text{sp}}: (s)

WHAT YOU DID WELL
Compliments from Your Teacher

You wrote the correct solubility product expression for CaSO4\text{CaSO}_4.

You accurately identified (aq)(aq) for Qsp<KspQ_{\text{sp}} < K_{\text{sp}} and (s)(s) for Qsp>KspQ_{\text{sp}} > K_{\text{sp}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equimolar assumption in the presence of a common ion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defaulted to pure-water molar solubility formulas (Ksp=x2K_{\text{sp}} = x^2) rather than checking whether one ion concentration was already independently fixed by a common ion source.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for Pre-existing Common Ions
  • When a soluble salt provides one of the lattice ions, its concentration is fixed before any second ion is introduced.

  • Always identify whether an initial cation or anion concentration is given from another soluble source before setting up your KspK_{\text{sp}} equation.

Solve for the Target Ion Directly
  • At the onset boundary of precipitation, Qsp=Ksp=[cation]initial[anion]minQ_{\text{sp}} = K_{\text{sp}} = [\text{cation}]_{\text{initial}}[\text{anion}]_{\text{min}}.

  • Substitute the known initial ion concentration directly and solve for the unknown counter-ion by division rather than taking a root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the precipitation threshold condition: Ksp=[Ca2+][SO42−]K_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}].

  2. Substitute the given concentration of calcium ions: 4.93×10−5=(3.00×10−3 M)[SO42−]4.93 \times 10^{-5} = (3.00 \times 10^{-3}\text{ M})[\text{SO}_4^{2-}].

  3. Divide to find the minimum sulfate concentration: [SO42−]=4.93×10−53.00×10−3 M=1.64×10−2 M[\text{SO}_4^{2-}] = \frac{4.93 \times 10^{-5}}{3.00 \times 10^{-3}\text{ M}} = 1.64 \times 10^{-2}\text{ M}.

Final answer

(a) [SO42−]=1.64×10−2 M[\text{SO}_4^{2-}] = 1.64 \times 10^{-2}\text{ M}; (b) For Qsp<KspQ_{\text{sp}} < K_{\text{sp}}, state is (aq)(aq); for Qsp>KspQ_{\text{sp}} > K_{\text{sp}}, state is (s)(s).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how common ions alter the calculation compared to dissolving a solid in pure water.

  • Practice distinguishing pure-water molar solubility (Ksp=x2K_{\text{sp}} = x^2) from selective precipitation problems where one ion concentration is fixed.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies the known calcium concentration by the Ksp value instead of dividing Ksp by [Ca²⁺].

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [SO42−]=Ksp×[Ca2+][\text{SO}_4^{2-}] = K_{\text{sp}} \times [\text{Ca}^{2+}]

    Correct

    [SO42−]=Ksp[Ca2+][\text{SO}_4^{2-}] = \frac{K_{\text{sp}}}{[\text{Ca}^{2+}]}

    Because the equilibrium expression is Ksp=[Ca2+][SO42−]K_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}], you need to divide both sides by [Ca2+][\text{Ca}^{2+}] to solve for [SO42−][\text{SO}_4^{2-}].

  2. Step 2

    [SO42−]=(4.93×10−5)(3.00×10−3)=1.48×10−7 M[\text{SO}_4^{2-}] = (4.93 \times 10^{-5})(3.00 \times 10^{-3}) = 1.48 \times 10^{-7}\text{ M}

    Correct

    [SO42−]=4.93×10−53.00×10−3 M=1.64×10−2 M[\text{SO}_4^{2-}] = \frac{4.93 \times 10^{-5}}{3.00 \times 10^{-3}\text{ M}} = 1.64 \times 10^{-2}\text{ M}

    Your arithmetic was carried out accurately for your written expression, but the calculated concentration inherits the algebraic inversion error from the previous step.

  3. Step 3

    For Qsp<Ksp:(aq)  ⟹  For Qsp>Ksp:(s)\text{For } Q_{\text{sp}} < K_{\text{sp}}: (aq) \implies \text{For } Q_{\text{sp}} > K_{\text{sp}}: (s)

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that the onset of precipitation is governed by the KspK_{\text{sp}} expression.

You carried out your scientific notation multiplication accurately.

You correctly assigned the physical state symbols (aq)(aq) and (s)(s) based on the comparison between QspQ_{\text{sp}} and KspK_{\text{sp}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Inversion in Equilibrium Solving

You accidentally multiplied the solubility product by the cation concentration rather than dividing by it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated KspK_{\text{sp}} as a proportionality factor to multiply by rather than as the fixed product of the two ion concentrations (Ksp=[A+][B−]K_{\text{sp}} = [\text{A}^+][\text{B}^-]).

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the Unrearranged Law of Mass Action First
  • Ksp=[Mn+]a[Xm−]bK_{\text{sp}} = [\text{M}^{n+}]^a[\text{X}^{m-}]^b

  • Always write down the full equilibrium product expression before attempting to isolate one unknown ion concentration.

Use Inverse Operations to Isolate Factors
  • If P=A⋅BP = A \cdot B, then B=PAB = \frac{P}{A}.

  • Check that the variable you are isolating is in the numerator and the known multiplying factor moves to the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. [SO42−]=Ksp[Ca2+][\text{SO}_4^{2-}] = \frac{K_{\text{sp}}}{[\text{Ca}^{2+}]}

  2. [SO42−]=4.93×10−53.00×10−3 M≈1.64×10−2 M[\text{SO}_4^{2-}] = \frac{4.93 \times 10^{-5}}{3.00 \times 10^{-3}\text{ M}} \approx 1.64 \times 10^{-2}\text{ M}

Final answer

(a) [SO42−]=1.64×10−2 M[\text{SO}_4^{2-}] = 1.64 \times 10^{-2}\text{ M}; (b) For Qsp<KspQ_{\text{sp}} < K_{\text{sp}}, (aq)(aq); for Qsp>KspQ_{\text{sp}} > K_{\text{sp}}, (s)(s)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the explicit product Ksp=[Ca2+][SO42−]K_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}] as your starting line for solubility problems.

  • Perform unit and magnitude sanity checks: since KspK_{\text{sp}} is on the order of 10−510^{-5} and [Ca2+][\text{Ca}^{2+}] is 10−3 M10^{-3}\text{ M}, [SO42−][\text{SO}_4^{2-}] must be around 10−510−3=10−2 M\frac{10^{-5}}{10^{-3}} = 10^{-2}\text{ M}, not 10−7 M10^{-7}\text{ M}.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the physical state conditions, associating Qsp < Ksp with solid precipitate and Qsp > Ksp with dissolved aqueous ions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ksp=[Ca2+][SO42−]  ⟹  [SO42−]=4.93×10−53.00×10−3=1.64×10−2 MK_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}] \implies [\text{SO}_4^{2-}] = \frac{4.93 \times 10^{-5}}{3.00 \times 10^{-3}} = 1.64 \times 10^{-2}\text{ M}

  2. Step 2

    For Qsp<Ksp:(s)  ⟹  For Qsp>Ksp:(aq)\text{For } Q_{\text{sp}} < K_{\text{sp}}: (s) \implies \text{For } Q_{\text{sp}} > K_{\text{sp}}: (aq)

    Correct

    For Qsp<Ksp:(aq); for Qsp>Ksp:(s)\text{For } Q_{\text{sp}} < K_{\text{sp}}: (aq); \text{ for } Q_{\text{sp}} > K_{\text{sp}}: (s)

    When Qsp<KspQ_{\text{sp}} < K_{\text{sp}}, the solution is unsaturated, meaning the ion product has not reached the solubility limit and all species remain dissolved as aqueous ions (aq)(aq). When Qsp>KspQ_{\text{sp}} > K_{\text{sp}}, the solution is supersaturated, driving the equilibrium to the left to form a solid precipitate (s)(s).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the solubility product expression Ksp=[Ca2+][SO42−]K_{\text{sp}} = [\text{Ca}^{2+}][\text{SO}_4^{2-}].

You accurately solved for the threshold concentration [SO42−]=1.64×10−2 M[\text{SO}_4^{2-}] = 1.64 \times 10^{-2}\text{ M}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium Quotient State Inversion

You accidentally reversed which state symbol corresponds to an unsaturated solution versus a supersaturated precipitate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated a smaller ion product quotient (Qsp<KspQ_{\text{sp}} < K_{\text{sp}}) with precipitate formation rather than recognizing that QspQ_{\text{sp}} represents the actual product of dissolved ion concentrations currently present in solution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpreting the Ion Product Quotient $Q_{\text{sp}}$
  • Qsp=[cation]m[anion]nQ_{\text{sp}} = [\text{cation}]^m[\text{anion}]^n measures the dissolved ions currently in solution relative to the equilibrium threshold KspK_{\text{sp}}.

  • If Qsp<KspQ_{\text{sp}} < K_{\text{sp}}, the solution can dissolve more ions without precipitating, so all species remain dissolved as (aq)(aq).

Predicting Precipitation from $Q_{\text{sp}} > K_{\text{sp}}$
  • When Qsp>KspQ_{\text{sp}} > K_{\text{sp}}, ion concentrations exceed the solubility limit, shifting the dissolution equilibrium Solid(s)⇌Ions(aq)\text{Solid}(s) \rightleftharpoons \text{Ions}(aq) toward the solid.

  • Assign the solid state symbol (s)(s) when Qsp>KspQ_{\text{sp}} > K_{\text{sp}} because excess ions precipitate out as a solid phase.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the current ion product QspQ_{\text{sp}} with KspK_{\text{sp}}.

  2. For Qsp<KspQ_{\text{sp}} < K_{\text{sp}}, the solution is unsaturated, so no solid forms and calcium sulfate exists entirely as dissolved ions: (aq)(aq).

  3. For Qsp>KspQ_{\text{sp}} > K_{\text{sp}}, the solution is supersaturated, driving the precipitation of solid calcium sulfate: (s)(s).

Final answer

(a) [SO42−]=1.64×10−2 M[\text{SO}_4^{2-}] = 1.64 \times 10^{-2}\text{ M}; (b) For Qsp<KspQ_{\text{sp}} < K_{\text{sp}}: (aq)(aq); for Qsp>KspQ_{\text{sp}} > K_{\text{sp}}: (s)(s)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical meaning of QspQ_{\text{sp}} as the product of ions currently dissolved in the aqueous phase.

  • Practice matching Qsp<KspQ_{\text{sp}} < K_{\text{sp}}, Qsp=KspQ_{\text{sp}} = K_{\text{sp}}, and Qsp>KspQ_{\text{sp}} > K_{\text{sp}} with unsaturated (aq)(aq), saturated at equilibrium, and supersaturated with precipitate (s)(s).

Lock it in

Similar question

01

A solution contains 2.00×10−4 M Ag+2.00 \times 10^{-4}\text{ M } \text{Ag}^+. Given Ksp(AgCl)=1.80×10−10K_{\text{sp}}(\text{AgCl}) = 1.80 \times 10^{-10}, determine the minimum concentration of chloride ions, [Cl−][\text{Cl}^-], required to begin precipitation of AgCl(s)\text{AgCl}(s).

Answer

[Cl−]=9.00×10−7 M[\text{Cl}^-] = 9.00 \times 10^{-7}\text{ M}. Key step: At the precipitation boundary, Ksp=[Ag+][Cl−]  ⟹  [Cl−]=1.80×10−102.00×10−4 M=9.00×10−7 MK_{\text{sp}} = [\text{Ag}^+][\text{Cl}^-] \implies [\text{Cl}^-] = \frac{1.80 \times 10^{-10}}{2.00 \times 10^{-4}\text{ M}} = 9.00 \times 10^{-7}\text{ M}.

02

Solid sodium fluoride, NaF\text{NaF}, is gradually added to a 0.0250 M Ca(NO3)20.0250\text{ M } \text{Ca(NO}_3)_2 solution. If Ksp(CaF2)=3.45×10−11K_{\text{sp}}(\text{CaF}_2) = 3.45 \times 10^{-11}, calculate the minimum [F−][\text{F}^-] needed to initiate precipitation of CaF2(s)\text{CaF}_2(s).

Answer

[F−]=3.71×10−5 M[\text{F}^-] = 3.71 \times 10^{-5}\text{ M}. Key step: Ksp=[Ca2+][F−]2  ⟹  [F−]=Ksp[Ca2+]=3.45×10−110.0250 M=3.71×10−5 MK_{\text{sp}} = [\text{Ca}^{2+}][\text{F}^-]^2 \implies [\text{F}^-] = \sqrt{\frac{K_{\text{sp}}}{[\text{Ca}^{2+}]}} = \sqrt{\frac{3.45 \times 10^{-11}}{0.0250\text{ M}}} = 3.71 \times 10^{-5}\text{ M}.

03

A solution contains 1.00×10−3 M Pb2+1.00 \times 10^{-3}\text{ M } \text{Pb}^{2+} and 2.00×10−2 M Ba2+2.00 \times 10^{-2}\text{ M } \text{Ba}^{2+}. Aqueous potassium sulfate is slowly titrated into the solution. Given Ksp(PbSO4)=1.80×10−8K_{\text{sp}}(\text{PbSO}_4) = 1.80 \times 10^{-8} and Ksp(BaSO4)=1.10×10−10K_{\text{sp}}(\text{BaSO}_4) = 1.10 \times 10^{-10}, determine which solid precipitates first and the sulfate concentration at which it begins to precipitate.

Answer

BaSO4(s)\text{BaSO}_4(s) precipitates first at [SO42−]=5.50×10−9 M[\text{SO}_4^{2-}] = 5.50 \times 10^{-9}\text{ M}. Key steps: For BaSO4\text{BaSO}_4, [SO42−]=1.10×10−102.00×10−2=5.50×10−9 M[\text{SO}_4^{2-}] = \frac{1.10 \times 10^{-10}}{2.00 \times 10^{-2}} = 5.50 \times 10^{-9}\text{ M}. For PbSO4\text{PbSO}_4, [SO42−]=1.80×10−81.00×10−3=1.80×10−5 M[\text{SO}_4^{2-}] = \frac{1.80 \times 10^{-8}}{1.00 \times 10^{-3}} = 1.80 \times 10^{-5}\text{ M}. The lower sulfate threshold precipitates first.

Loading workspace…