Resources
A standard galvanic cell is constructed at using a zinc electrode immersed in a solution and a copper electrode immersed in a solution, connected by a potassium nitrate salt bridge. Given the standard reduction potentials for and for , write the overall balanced cell reaction and calculate the standard cell potential ().
Answer and steps
Final answer
;
Steps
Identify the Cathode and Anode
In a galvanic cell, the reaction occurs spontaneously, requiring a positive standard cell potential ().
Compare the standard reduction potentials () of the two half-reactions:
The species with the more positive (higher) reduction potential is more readily reduced, meaning it will serve as the cathode:
- Cathode (reduction):
The species with the lower reduction potential will undergo oxidation at the anode:
- Anode (oxidation):
Write the Overall Balanced Cell Reaction
Combine the reduction half-reaction and the oxidation half-reaction. Because both half-reactions involve electrons, the electrons cancel directly without needing multiplication:
Calculate the Standard Cell Potential ()
Use the standard cell potential formula:
Substitute the given standard reduction potentials:
Common Pitfall: When using the formula , do not reverse the sign of the anode's standard reduction potential beforehand. The minus sign in the formula already accounts for reversing the reduction reaction into an oxidation reaction.
Typical errors
01 The student subtracts the reduction potential of the cathode from the anode, obtaining a negative cell potential for a galvanic cell.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You inverted the standard cell potential formula by subtracting the cathode potential from the anode potential rather than calculating .
- Step 3Correct
Your arithmetic follows correctly from your inverted formula, but because the formula was reversed, the resulting potential has an incorrect negative sign.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified which species is oxidized and which is reduced.
You correctly balanced the overall cell reaction.
You correctly identified the standard reduction potential values for both electrodes.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou recalled the cell potential formula as anode minus cathode instead of cathode minus anode (), overlooking the sanity check that standard galvanic cells must have a positive cell potential ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Cathode vs. Anode Formula
Standard cell potential using standard reduction potentials is defined as (or ).
Always write and verify that the cathode has the more positive reduction potential.
- Galvanic Cell Sanity Check
Galvanic (voltaic) cells run spontaneously under standard conditions, which requires and .
If you compute a negative for a galvanic cell, immediately re-check your formula and electrode assignments.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the standard cell potential formula:
Substitute the cathode potential () and anode potential ():
Evaluate:
;
02 The student reverses the cathode and anode roles, assuming zinc undergoes reduction and copper undergoes oxidation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You wrote the cell reaction for the oxidation of copper and reduction of zinc. In a spontaneous galvanic cell, zinc is oxidized and copper ion is reduced.
- Step 2Correct
Because , copper ion has the higher reduction potential and is reduced at the cathode, while zinc is oxidized at the anode.
- Step 3Correct
You applied the formula correctly with your assigned values, but the result is negative because the electrode assignments were reversed.
WHAT YOU DID WELL
Compliments from Your TeacherYou stated the correct relationship .
You performed the arithmetic subtraction accurately based on your assigned values.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assigned the more negative reduction potential to the cathode instead of the anode.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not use the criterion that a galvanic cell must operate spontaneously (), which requires the half-cell with the greater (more positive) reduction potential to act as the cathode.
REASONING PATH
Your ACEpath teacher’s suggested approach- Galvanic Spontaneity Rule
A standard galvanic cell operates spontaneously, so must always be positive.
Check the sign of at the end; if it is negative, you have reversed the cathode and anode.
- Cathode vs. Anode Selection
.
Compare the standard reduction potentials directly before assigning electrodes.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompare the standard reduction potentials: and .
Assign the cathode to copper (reduction: ) and the anode to zinc (oxidation: ).
Combine the half-reactions: .
Calculate .
;
03 The student changes the sign of the oxidation potential when setting up the anode and then erroneously subtracts it in the standard formula, effectively subtracting twice.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You mixed two different formulas for cell potential: and . By changing the sign to and then subtracting it, you reversed the sign twice, yielding a negative voltage for a spontaneous galvanic cell.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly determined that copper(II) is reduced at the cathode and solid zinc is oxidized at the anode.
You wrote the correct overall balanced net ionic equation.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the subtraction formula (which uses standard reduction potentials for both electrodes) with the additive formula , resulting in subtracting an already sign-reversed oxidation potential.
REASONING PATH
Your ACEpath teacher’s suggested approach- Choose one consistent cell potential formula
Either subtract reduction potentials: , OR add the oxidation potential: .
Pick one convention and stick to it. Never subtract .
- Galvanic cell sanity check
A galvanic (voltaic) cell runs spontaneously, so its standard cell potential must always be positive ().
If you calculate a negative cell potential for a standard galvanic cell, check immediately whether you reversed a sign improperly or swapped the cathode and anode.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify standard reduction potentials directly from the table: and .
Apply the standard reduction formula: .
Evaluate: .
;
Lock it in
What is the standard formula for calculating standard cell potential () from standard reduction potentials?
. Remember: reduction occurs at the cathode, and oxidation occurs at the anode.
Similar question
A galvanic cell is constructed with a silver electrode in and a lead electrode in . Given and , identify the cathode and anode, and calculate .
Answer
Cathode: Ag; Anode: Pb. .
Consider the standard half-reactions: () and (). Write the balanced overall cell reaction for a galvanic cell and determine .
Answer
; .
An electrochemical cell has the overall reaction with . If , find the standard reduction potential of the half-reaction.
Answer
. Since Cd is reduced at the cathode and Mg is oxidized at the anode: .