Resources

In a general chemistry laboratory experiment, a student generates hydrogen gas by reacting excess hydrochloric acid with an analytical sample of zinc metal: Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)\text{Zn}(s) + 2\text{HCl}(aq) \rightarrow \text{ZnCl}_2(aq) + \text{H}_2(g). The produced H2(g)\text{H}_2(g) is collected over water in an inverted gas-measuring buret (eudiometer) at an ambient barometric pressure of 758.2 torr758.2\text{ torr} and an equilibrated water bath temperature of 23.0∘C23.0^{\circ}\text{C}. The gas volume measured inside the eudiometer is 43.8 mL43.8\text{ mL}, with the internal and external liquid levels perfectly leveled. Given that the saturated vapor pressure of water at 23.0∘C23.0^{\circ}\text{C} is 21.1 torr21.1\text{ torr}, calculate the dry moles of H2\text{H}_2 gas collected and determine the mass of zinc consumed in milligrams (mg\text{mg}). (Molar mass of Zn=65.38 g/mol\text{Zn} = 65.38\text{ g/mol}, R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})).

Answer and steps

Final answer

1.74×10−3 mol H21.74 \times 10^{-3}\text{ mol H}_2, 114 mg Zn114\text{ mg Zn}

Steps

01

Find the partial pressure of dry hydrogen gas (HX2\ce{H2})

To find the amount of dry hydrogen gas produced and the mass of zinc consumed, apply Dalton's Law of Partial Pressures followed by the Ideal Gas Law and stoichiometry.

Because the hydrogen gas is collected over water, the gas inside the eudiometer is a mixture of dry HX2\ce{H2} and water vapor (HX2O\ce{H2O}).

Since the internal and external water levels are equal, the total pressure of the gas mixture equals the barometric atmospheric pressure: Ptotal=Pbarometric=758.2 torrP_{\text{total}} = P_{\text{barometric}} = 758.2\text{ torr}

According to Dalton's Law of Partial Pressures: Ptotal=PHX2+PHX2OP_{\text{total}} = P_{\ce{H2}} + P_{\ce{H2O}}

Subtract the vapor pressure of water at 23.0∘C23.0^\circ\text{C} (21.1 torr21.1\text{ torr}) to obtain the partial pressure of dry HX2\ce{H2}: PHX2=758.2 torr−21.1 torr=737.1 torrP_{\ce{H2}} = 758.2\text{ torr} - 21.1\text{ torr} = 737.1\text{ torr}

Convert this pressure into atmospheres (atm\text{atm}): PHX2=737.1 torr760.0 torr/atm≈0.9699 atmP_{\ce{H2}} = \frac{737.1\text{ torr}}{760.0\text{ torr/atm}} \approx 0.9699\text{ atm}

Common Pitfall: Forgetting to subtract the vapor pressure of water will overestimate the pressure—and consequently the moles—of hydrogen gas generated.


02

Calculate the moles of dry HX2\ce{H2} gas collected

Convert temperature to kelvins and volume to liters:

  • T=23.0+273.15=296.15 KT = 23.0 + 273.15 = 296.15\text{ K}
  • V=43.8 mL=0.0438 LV = 43.8\text{ mL} = 0.0438\text{ L}

Use the Ideal Gas Law (PV=nRTPV = nRT): nHX2=PHX2VRTn_{\ce{H2}} = \frac{P_{\ce{H2}} V}{R T}

Substitute the values: nHX2=0.9699 atm⋅0.0438 L0.08206 L⋅atm/(mol⋅K)⋅296.15 K≈1.74×10−3 moln_{\ce{H2}} = \frac{0.9699\text{ atm} \cdot 0.0438\text{ L}}{0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) \cdot 296.15\text{ K}} \approx 1.74 \times 10^{-3}\text{ mol}


03

Determine the mass of zinc consumed

From the balanced chemical equation: Zn(s)+2HCl(aq)→ZnClX2(aq)+HX2(g)\ce{Zn}(s) + 2\ce{HCl}(aq) \rightarrow \ce{ZnCl2}(aq) + \ce{H2}(g)

The stoichiometric ratio between Zn\ce{Zn} and HX2\ce{H2} is 1:11:1: nZn=nHX2=1.74×10−3 moln_{\ce{Zn}} = n_{\ce{H2}} = 1.74 \times 10^{-3}\text{ mol}

Calculate the mass of zinc consumed using its molar mass (65.38 g/mol65.38\text{ g/mol}): mass of Zn=1.74×10−3 mol⋅65.38 g/mol≈0.114 g\text{mass of Zn} = 1.74 \times 10^{-3}\text{ mol} \cdot 65.38\text{ g/mol} \approx 0.114\text{ g}

Convert grams to milligrams: mass of Zn=0.114 g⋅1000 mg/g=114 mg\text{mass of Zn} = 0.114\text{ g} \cdot 1000\text{ mg/g} = 114\text{ mg}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores Dalton's law of partial pressures and fails to subtract the vapor pressure of water, using the total barometric pressure directly as the pressure of hydrogen.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=758.2 torr760 torr/atm=0.9976 atmP = \frac{758.2\text{ torr}}{760\text{ torr/atm}} = 0.9976\text{ atm}, V=0.0438 LV = 0.0438\text{ L}, T=23.0+273.15=296.15 KT = 23.0 + 273.15 = 296.15\text{ K}

    Correct

    PHX2=758.2 torr−21.1 torr760 torr/atm=737.1 torr760 torr/atm≈0.9699 atmP_{\ce{H2}} = \frac{758.2\text{ torr} - 21.1\text{ torr}}{760\text{ torr/atm}} = \frac{737.1\text{ torr}}{760\text{ torr/atm}} \approx 0.9699\text{ atm}, V=0.0438 LV = 0.0438\text{ L}, T=296.15 KT = 296.15\text{ K}

    You converted temperature and volume accurately, but because the hydrogen gas was collected over water, the gas inside the tube is a mixture of HX2\ce{H2} and HX2O\ce{H2O} vapor. You need to subtract the water vapor pressure (21.1 torr21.1\text{ torr}) from the barometric pressure (758.2 torr758.2\text{ torr}) before converting to atmospheres.

  2. Step 2

    n(HX2)=PVRT=0.9976⋅0.04380.08206⋅296.15=1.80×10−3 moln(\ce{H2}) = \frac{PV}{RT} = \frac{0.9976 \cdot 0.0438}{0.08206 \cdot 296.15} = 1.80 \times 10^{-3}\text{ mol}

    Correct

    nHX2=PHX2VRT=0.9699 atm⋅0.0438 L0.08206 L⋅atm/(mol⋅K)⋅296.15 K≈1.74×10−3 moln_{\ce{H2}} = \frac{P_{\ce{H2}}V}{RT} = \frac{0.9699\text{ atm} \cdot 0.0438\text{ L}}{0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) \cdot 296.15\text{ K}} \approx 1.74 \times 10^{-3}\text{ mol}

    You applied the ideal gas formula correctly, but the resulting mole value is slightly too high because it carried forward the uncorrected pressure.

  3. Step 3

    n(Zn)=n(HX2)=1.80×10−3 mol  ⟹  m(Zn)=1.80×10−3 mol⋅65.38 g/mol=0.118 g=118 mgn(\ce{Zn}) = n(\ce{H2}) = 1.80 \times 10^{-3}\text{ mol} \implies m(\ce{Zn}) = 1.80 \times 10^{-3}\text{ mol} \cdot 65.38\text{ g/mol} = 0.118\text{ g} = 118\text{ mg}

    Correct

    nZn=nHX2=1.74×10−3 mol  ⟹  mZn=1.74×10−3 mol⋅65.38 g/mol≈0.114 g=114 mgn_{\ce{Zn}} = n_{\ce{H2}} = 1.74 \times 10^{-3}\text{ mol} \implies m_{\ce{Zn}} = 1.74 \times 10^{-3}\text{ mol} \cdot 65.38\text{ g/mol} \approx 0.114\text{ g} = 114\text{ mg}

    Your stoichiometric ratio of 1:11:1 and unit conversion from grams to milligrams were completely correct, but the numerical mass reflects the propagated mole value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the gas volume from milliliters to liters and temperature from Celsius to Kelvin.

You set up and evaluated the ideal gas law equation with the correct gas constant RR.

You used the correct 1:11:1 stoichiometric molar ratio between zinc and hydrogen gas and converted grams to milligrams properly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Water Vapor Pressure

You treated the total barometric pressure as the partial pressure of pure hydrogen without deducting the saturated vapor pressure of water.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Whenever a gas is collected over an aqueous solution (water displacement), water evaporates into the collection vessel until dynamic equilibrium is reached. According to Dalton's Law of Partial Pressures, Ptotal=Pgas+PHX2OP_{\text{total}} = P_{\text{gas}} + P_{\ce{H2O}}, so the dry gas pressure is always strictly less than the total measured barometric pressure: Pgas=Ptotal−PHX2OP_{\text{gas}} = P_{\text{total}} - P_{\ce{H2O}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recognizing Gas Collected Over Water
  • Any gas gathered by water displacement is saturated with water vapor: Ptotal=Pgas+PHX2OP_{\text{total}} = P_{\text{gas}} + P_{\ce{H2O}}.

  • Always look for the vapor pressure of water at the given temperature and subtract it from the atmospheric pressure before entering PP into PV=nRTPV = nRT.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract water vapor pressure: PHX2=758.2 torr−21.1 torr=737.1 torrP_{\ce{H2}} = 758.2\text{ torr} - 21.1\text{ torr} = 737.1\text{ torr}.

  2. Convert to atmospheres: PHX2=737.1760.0≈0.9699 atmP_{\ce{H2}} = \frac{737.1}{760.0} \approx 0.9699\text{ atm}.

  3. Solve for dry moles: nHX2=0.9699⋅0.04380.08206⋅296.15≈1.74×10−3 moln_{\ce{H2}} = \frac{0.9699 \cdot 0.0438}{0.08206 \cdot 296.15} \approx 1.74 \times 10^{-3}\text{ mol}.

  4. Calculate mass of zinc: mZn=1.74×10−3 mol⋅65.38 g/mol≈0.114 g=114 mgm_{\ce{Zn}} = 1.74 \times 10^{-3}\text{ mol} \cdot 65.38\text{ g/mol} \approx 0.114\text{ g} = 114\text{ mg}.

Final answer

1.74×10−3 mol H21.74 \times 10^{-3}\text{ mol H}_2, 114 mg Zn114\text{ mg Zn}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out Dalton's Law formula (Ptotal=Pgas+PHX2OP_{\text{total}} = P_{\text{gas}} + P_{\ce{H2O}}) as your very first step whenever a problem mentions 'collected over water'.

  • Highlight the vapor pressure given in the problem text so it is not overlooked before converting pressure units.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the temperature from Celsius to Kelvin when applying the ideal gas law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P(H2)=758.2−21.1=737.1 torr  ⟹  P(H2)=737.1760=0.9699 atmP(\text{H}_2) = 758.2 - 21.1 = 737.1\text{ torr} \implies P(\text{H}_2) = \frac{737.1}{760} = 0.9699\text{ atm}

  2. Step 2

    V=0.0438 LV = 0.0438\text{ L}, T=23.0 C  ⟹  n(H2)=PVRT=0.9699⋅0.04380.08206⋅23.0=0.0225 molT = 23.0\text{ C} \implies n(\text{H}_2) = \frac{PV}{RT} = \frac{0.9699 \cdot 0.0438}{0.08206 \cdot 23.0} = 0.0225\text{ mol}

    Correct

    T=23.0+273.15=296.15 K  ⟹  n(H2)=0.9699 atm⋅0.0438 L0.08206 L⋅atm/(mol⋅K)⋅296.15 K≈1.74×10−3 molT = 23.0 + 273.15 = 296.15\text{ K} \implies n(\text{H}_2) = \frac{0.9699\text{ atm} \cdot 0.0438\text{ L}}{0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) \cdot 296.15\text{ K}} \approx 1.74 \times 10^{-3}\text{ mol}

    You substituted T=23.0∘CT = 23.0^\circ\text{C} directly into PV=nRTPV = nRT. Gas law calculations require absolute temperature in Kelvin (T=23.0+273.15=296.15 KT = 23.0 + 273.15 = 296.15\text{ K}).

  3. Step 3

    n(Zn)=n(H2)=0.0225 mol  ⟹  m(Zn)=0.0225 mol⋅65.38 g/mol=1.47 g=1470 mgn(\text{Zn}) = n(\text{H}_2) = 0.0225\text{ mol} \implies m(\text{Zn}) = 0.0225\text{ mol} \cdot 65.38\text{ g/mol} = 1.47\text{ g} = 1470\text{ mg}

    Correct

    n(Zn)=n(H2)=1.74×10−3 mol  ⟹  m(Zn)=1.74×10−3 mol⋅65.38 g/mol⋅1000 mg/g≈114 mgn(\text{Zn}) = n(\text{H}_2) = 1.74 \times 10^{-3}\text{ mol} \implies m(\text{Zn}) = 1.74 \times 10^{-3}\text{ mol} \cdot 65.38\text{ g/mol} \cdot 1000\text{ mg/g} \approx 114\text{ mg}

    Your stoichiometric 1:11:1 mole ratio and molar mass conversion were logically sound, but the numerical answer is affected by the incorrect mole value calculated in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Dalton's law of partial pressures to remove the saturated water vapor pressure.

You converted pressure to atmospheres and volume to liters accurately.

You correctly used the 1:11:1 stoichiometric ratio between Zn\text{Zn} and H2\text{H}_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit Error in Ideal Gas Law

You forgot to convert the Celsius temperature to Kelvin before evaluating the ideal gas equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The ideal gas constant R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) has units containing Kelvin (K\text{K}). Using Celsius ignores the absolute temperature scale and inflates the calculated molar quantity by a factor of roughly 296.15/23.0≈12.9296.15 / 23.0 \approx 12.9.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Temperature Units in Gas Equations
  • Every gas law calculation (PV=nRTPV = nRT, combined gas law, Graham's law, etc.) requires absolute temperature in Kelvin.

  • Always compute T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15 first before substituting into PV=nRTPV = nRT.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert temperature to Kelvin: T=23.0+273.15=296.15 KT = 23.0 + 273.15 = 296.15\text{ K}.

  2. Compute dry moles of H2\text{H}_2: n=PVRT=(0.9699 atm)(0.0438 L)(0.08206 L⋅atm/(mol⋅K))(296.15 K)≈1.744×10−3 moln = \frac{PV}{RT} = \frac{(0.9699\text{ atm})(0.0438\text{ L})}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}))(296.15\text{ K})} \approx 1.744 \times 10^{-3}\text{ mol}.

  3. Convert moles of Zn\text{Zn} to milligrams: m=(1.744×10−3 mol)(65.38 g/mol)(1000 mg/g)≈114 mgm = (1.744 \times 10^{-3}\text{ mol})(65.38\text{ g/mol})(1000\text{ mg/g}) \approx 114\text{ mg}.

Final answer

1.74×10−3 mol H21.74 \times 10^{-3}\text{ mol H}_2, 114 mg Zn114\text{ mg Zn}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the unit of the gas constant RR before each calculation to verify that pressure (atm\text{atm}), volume (L\text{L}), and temperature (K\text{K}) match.

  • Practice converting temperatures to Kelvin as the very first step in gas law problems.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the 1:2 stoichiometric coefficient of HCl as applying between Zn and H2, halving the moles of zinc consumed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P(H2)=758.2−21.1=737.1 torr=0.9699 atm  ⟹  V=0.0438 L  ⟹  T=23.0+273.15=296.15 K  ⟹  n(H2)=0.9699⋅0.04380.08206⋅296.15=1.75⋅10−3 molP(\text{H}_2) = 758.2 - 21.1 = 737.1\text{ torr} = 0.9699\text{ atm} \implies V = 0.0438\text{ L} \implies T = 23.0 + 273.15 = 296.15\text{ K} \implies n(\text{H}_2) = \frac{0.9699 \cdot 0.0438}{0.08206 \cdot 296.15} = 1.75 \cdot 10^{-3}\text{ mol}

  2. Step 2

    n(Zn)=1.75⋅10−32=8.75⋅10−4 moln(\text{Zn}) = \frac{1.75 \cdot 10^{-3}}{2} = 8.75 \cdot 10^{-4}\text{ mol}

    Correct

    n(Zn)=n(H2)=1.75×10−3 moln(\text{Zn}) = n(\text{H}_2) = 1.75 \times 10^{-3}\text{ mol}

    From the balanced chemical equation Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)\text{Zn}(s) + 2\text{HCl}(aq) \rightarrow \text{ZnCl}_2(aq) + \text{H}_2(g), the stoichiometric ratio of Zn\text{Zn} to H2\text{H}_2 is 1:11:1, not 1:21:2. The coefficient of 22 belongs to HCl\text{HCl}, so you should not divide the moles of H2\text{H}_2 by 22.

  3. Step 3

    m(Zn)=8.75⋅10−4 mol⋅65.39 g/mol=0.0572 g=57.2 mgm(\text{Zn}) = 8.75 \cdot 10^{-4}\text{ mol} \cdot 65.39\text{ g/mol} = 0.0572\text{ g} = 57.2\text{ mg}

    Correct

    m(Zn)=1.74×10−3 mol×65.38 g/mol≈0.114 g=114 mgm(\text{Zn}) = 1.74 \times 10^{-3}\text{ mol} \times 65.38\text{ g/mol} \approx 0.114\text{ g} = 114\text{ mg}

    Your molar mass multiplication and unit conversion from grams to milligrams were carried out accurately, but the numerical result was halved due to the earlier mole ratio error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Dalton's Law of Partial Pressures to isolate the partial pressure of dry hydrogen.

You accurately converted all laboratory measurements into appropriate SI and gas-law units (PP to atm\text{atm}, VV to L\text{L}, and TT to K\text{K}).

You correctly applied the Ideal Gas Law to calculate the moles of gas collected.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric Ratio Misassignment

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You mistakenly attributed the stoichiometric coefficient of 22 from HCl\text{HCl} to the relationship between Zn\text{Zn} and H2\text{H}_2, rather than reading the direct stoichiometric ratio (1 mol Zn:1 mol H21\text{ mol Zn} : 1\text{ mol H}_2) from the balanced chemical equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match stoichiometric coefficients directly
  • The mole ratio between any two substances in a reaction is given directly by their respective coefficients in the balanced equation: nAa=nBb\frac{n_A}{a} = \frac{n_B}{b}.

  • Always explicitly write down the unit factor with chemical formulas, such as (1 mol Zn1 mol H2)\left(\frac{1\text{ mol Zn}}{1\text{ mol H}_2}\right), to avoid picking up coefficients from unrelated reactants like HCl\text{HCl}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the 1:11:1 stoichiometric mole ratio between Zn\text{Zn} and H2\text{H}_2: n(Zn)=n(H2)=1.745×10−3 moln(\text{Zn}) = n(\text{H}_2) = 1.745 \times 10^{-3}\text{ mol}.

  2. Multiply the moles of Zn\text{Zn} by its molar mass: m(Zn)=1.745×10−3 mol×65.38 g/mol≈0.1141 gm(\text{Zn}) = 1.745 \times 10^{-3}\text{ mol} \times 65.38\text{ g/mol} \approx 0.1141\text{ g}.

  3. Convert grams to milligrams: 0.1141 g×1000 mg/g=114 mg0.1141\text{ g} \times 1000\text{ mg/g} = 114\text{ mg}.

Final answer

1.74×10−3 mol H21.74 \times 10^{-3}\text{ mol H}_2, 114 mg Zn114\text{ mg Zn}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying molar ratios by highlighting the specific coefficients of only the known and target substances in balanced equations.

  • Solve stoichiometry problems involving non-1:1 and 1:1 ratios in reactions with multiple reactants to build confidence in tracking individual coefficients.

Lock it in

Similar question

01

A sample of nitrogen gas is collected over water at 25.0∘C25.0^{\circ}\text{C} and a barometric pressure of 765.0 torr765.0\text{ torr}. If the water vapor pressure at 25.0∘C25.0^{\circ}\text{C} is 23.8 torr23.8\text{ torr} and the gas volume is 250.0 mL250.0\text{ mL}, find the moles of dry NX2\ce{N2} gas collected. (R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})).

Answer

PNX2=765.0−23.8=741.2 torr=0.9753 atmP_{\ce{N2}} = 765.0 - 23.8 = 741.2\text{ torr} = 0.9753\text{ atm}. T=298.15 KT = 298.15\text{ K}, V=0.2500 LV = 0.2500\text{ L}. Moles n=0.9753⋅0.25000.08206⋅298.15=9.96×10−3 moln = \frac{0.9753 \cdot 0.2500}{0.08206 \cdot 298.15} = 9.96 \times 10^{-3}\text{ mol}.

02

A student reacts an unknown mass of magnesium with excess HCl(aq)\ce{HCl}(aq): Mg(s)+2HCl(aq)→MgClX2(aq)+HX2(g)\ce{Mg}(s) + 2\ce{HCl}(aq) \rightarrow \ce{MgCl2}(aq) + \ce{H2}(g). The hydrogen gas is collected over water at 21.0∘C21.0^{\circ}\text{C} (PHX2O=18.7 torrP_{\ce{H2O}} = 18.7\text{ torr}) at an atmospheric pressure of 748.7 torr748.7\text{ torr}. The collected gas occupies 56.2 mL56.2\text{ mL}. Calculate the mass of magnesium consumed in milligrams. (Molar mass of Mg=24.31 g/mol\ce{Mg} = 24.31\text{ g/mol}).

Answer

PHX2=748.7−18.7=730.0 torr=0.9605 atmP_{\ce{H2}} = 748.7 - 18.7 = 730.0\text{ torr} = 0.9605\text{ atm}. T=294.15 KT = 294.15\text{ K}, V=0.0562 LV = 0.0562\text{ L}. nHX2=0.9605⋅0.05620.08206⋅294.15=2.238×10−3 moln_{\ce{H2}} = \frac{0.9605 \cdot 0.0562}{0.08206 \cdot 294.15} = 2.238 \times 10^{-3}\text{ mol}. Since 1 mol Mg:1 mol H21\text{ mol Mg} : 1\text{ mol H}_2, mass=2.238×10−3⋅24.31 g/mol=0.0544 g=54.4 mg\text{mass} = 2.238 \times 10^{-3} \cdot 24.31\text{ g/mol} = 0.0544\text{ g} = 54.4\text{ mg}.

03

A mixture of oxygen and water vapor is held in an inverted eudiometer over water. The total volume is 82.0 mL82.0\text{ mL} at 27.0∘C27.0^{\circ}\text{C} and 762.0 torr762.0\text{ torr}. The vapor pressure of water at 27.0∘C27.0^{\circ}\text{C} is 26.7 torr26.7\text{ torr}. What percentage of the total gas molecules inside the eudiometer consists of water vapor, and what is the mass of dry OX2\ce{O2} in grams? (Molar mass of OX2=32.00 g/mol\ce{O2} = 32.00\text{ g/mol}).

Answer

Mole fraction of water XHX2O=PHX2OPtotal=26.7762.0≈3.50%X_{\ce{H2O}} = \frac{P_{\ce{H2O}}}{P_{\text{total}}} = \frac{26.7}{762.0} \approx 3.50\%. POX2=762.0−26.7=735.3 torr=0.9675 atmP_{\ce{O2}} = 762.0 - 26.7 = 735.3\text{ torr} = 0.9675\text{ atm}. nOX2=0.9675⋅0.08200.08206⋅300.15=3.221×10−3 moln_{\ce{O2}} = \frac{0.9675 \cdot 0.0820}{0.08206 \cdot 300.15} = 3.221 \times 10^{-3}\text{ mol}. Mass of OX2=3.221×10−3⋅32.00=0.103 g\text{Mass of } \ce{O2} = 3.221 \times 10^{-3} \cdot 32.00 = 0.103\text{ g}.

Loading workspace…