Resources

A rigid 5.00 L5.00\text{ L} sealed flask containing 0.600 mol0.600\text{ mol} of gaseous dinitrogen tetroxide undergoes dissociation at a constant temperature of 320 K320\text{ K}: N2O4(g)→2NO2(g)\text{N}_2\text{O}_4(g) \rightarrow 2\text{NO}_2(g). Over a period of 80.0 s80.0\text{ s}, the total absolute gas pressure inside the vessel rises from 3.15 atm3.15\text{ atm} to 3.78 atm3.78\text{ atm} under ideal gas behavior (R=0.08206 L⋅atm⋅mol−1⋅K−1R = 0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}). Couple ideal gas stoichiometry with reaction kinetics to determine: (a) the rate of increase of total pressure ΔPtotalΔt\frac{\Delta P_{\text{total}}}{\Delta t} in atm⋅s−1\text{atm}\cdot\text{s}^{-1}, and (b) the average unique reaction rate in M⋅s−1\text{M}\cdot\text{s}^{-1}.

Answer and steps

Final answer

(a) ΔPtotalΔt=7.88×10−3 atm⋅s−1\frac{\Delta P_{\text{total}}}{\Delta t} = 7.88 \times 10^{-3}\text{ atm}\cdot\text{s}^{-1}; (b) Rate=3.00×10−4 M⋅s−1\text{Rate} = 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}

Steps

01

Relate pressure change to the change in moles

Part (a): Rate of Increase of Total Pressure

The rate of increase in total pressure is defined as the change in total pressure divided by the elapsed time: ΔPtotalΔt=Pfinal−PinitialΔt\frac{\Delta P_{\text{total}}}{\Delta t} = \frac{P_{\text{final}} - P_{\text{initial}}}{\Delta t} Substitute the given values into the equation: ΔPtotal=3.78 atm−3.15 atm=0.63 atm\Delta P_{\text{total}} = 3.78\text{ atm} - 3.15\text{ atm} = 0.63\text{ atm} ΔPtotalΔt=0.63 atm80.0 s=7.875×10−3 atm⋅s−1≈7.88×10−3 atm⋅s−1\frac{\Delta P_{\text{total}}}{\Delta t} = \frac{0.63\text{ atm}}{80.0\text{ s}} = 7.875 \times 10^{-3}\text{ atm}\cdot\text{s}^{-1} \approx 7.88 \times 10^{-3}\text{ atm}\cdot\text{s}^{-1}

Part (b): Average Unique Reaction Rate

For the dissociation reaction:

NX2OX4(g)→2 NOX2(g)\ce{N2O4(g) -> 2NO2(g)}

Let xx be the moles of NX2OX4\ce{N2O4} that react in time Δt\Delta t. According to reaction stoichiometry:

  • Change in NX2OX4\ce{N2O4}: ΔnNX2OX4=−x\Delta n_{\ce{N2O4}} = -x
  • Change in NOX2\ce{NO2}: ΔnNOX2=+2x\Delta n_{\ce{NO2}} = +2x
  • Net change in total gas moles: Δntotal=−x+2x=x\Delta n_{\text{total}} = -x + 2x = x

From the ideal gas law at constant volume (VV) and constant temperature (TT):

ΔPtotal=ΔntotalRTV=xRTV\Delta P_{\text{total}} = \frac{\Delta n_{\text{total}} R T}{V} = \frac{x R T}{V}

Dividing by RTR T gives the concentration change corresponding to the reaction extent:

xV=ΔPtotalRT\frac{x}{V} = \frac{\Delta P_{\text{total}}}{R T}

02

Calculate the unique reaction rate

The unique reaction rate is defined in terms of stoichiometric coefficients:

Rate=−Δ[NX2OX4]Δt=12Δ[NOX2]Δt=x/VΔt\text{Rate} = -\frac{\Delta [\ce{N2O4}]}{\Delta t} = \frac{1}{2}\frac{\Delta [\ce{NO2}]}{\Delta t} = \frac{x / V}{\Delta t}

Substituting xV=ΔPtotalRT\frac{x}{V} = \frac{\Delta P_{\text{total}}}{R T}:

Rate=1RT(ΔPtotalΔt)\text{Rate} = \frac{1}{R T}\left(\frac{\Delta P_{\text{total}}}{\Delta t}\right)

Now evaluate the denominator:

RT=(0.08206 L⋅atm⋅mol−1⋅K−1)(320 K)=26.2592 L⋅atm⋅mol−1R T = (0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(320\text{ K}) = 26.2592\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}

Substitute the rate of pressure increase found in part (a):

Rate=7.875×10−3 atm⋅s−126.2592 L⋅atm⋅mol−1=2.9989×10−4 mol⋅L−1⋅s−1≈3.00×10−4 M⋅s−1\text{Rate} = \frac{7.875 \times 10^{-3}\text{ atm}\cdot\text{s}^{-1}}{26.2592\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}} = 2.9989 \times 10^{-4}\text{ mol}\cdot\text{L}^{-1}\cdot\text{s}^{-1} \approx 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}

Key Pitfall: Do not equate the unique rate directly to ΔPtotalRTΔt\frac{\Delta P_{\text{total}}}{R T \Delta t} without accounting for Δntotal\Delta n_{\text{total}}. Here, each mole of reaction yields a net increase of 1 mol1\text{ mol} of gas (Δnrxn=2−1=1\Delta n_{\text{rxn}} = 2 - 1 = 1). If the stoichiometric difference were different (e.g., 2 A→3 B2\text{ A} \rightarrow 3\text{ B}, where Δnrxn=1\Delta n_{\text{rxn}} = 1), one must divide by that net change.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the net change in gas moles (Δν = +1) with the stoichiometric coefficient of the product NO2 (ν = 2), incorrectly setting Δn_total = 2Δξ and halving the true reaction rate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔPtotal=3.78 atm−3.15 atm=0.63 atm  ⟹  ΔPtotalΔt=0.63 atm80.0 s=7.88×10−3 atm/s\Delta P_{\text{total}} = 3.78\text{ atm} - 3.15\text{ atm} = 0.63\text{ atm} \implies \frac{\Delta P_{\text{total}}}{\Delta t} = \frac{0.63\text{ atm}}{80.0\text{ s}} = 7.88 \times 10^{-3}\text{ atm/s}

  2. Step 2

    Δntotal=0.63 atm×5.00 L0.08206 L⋅atm/(mol⋅K)×320 K=0.120 mol\Delta n_{\text{total}} = \frac{0.63\text{ atm} \times 5.00\text{ L}}{0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) \times 320\text{ K}} = 0.120\text{ mol}

  3. Step 3

    Since \text{Since } 2 mol of \text{ mol of } NOX2\ce{NO2}  are produced, \text{ are produced, } Δ\Delta n_{total\text{total}} = 2\xi   ⟹  \implies \xi = 0.120 mol2\frac{0.120\text{ mol}}{2} = 0.0600 mol\text{ mol}_

    Correct

    Δntotal=Δνgas⋅ξ=(2−1)ξ=1ξ  ⟹  ξ=0.120 mol\Delta n_{\text{total}} = \Delta \nu_{\text{gas}} \cdot \xi = (2 - 1)\xi = 1\xi \implies \xi = 0.120\text{ mol}

    You only counted the moles of NOX2\ce{NO2} formed (+2ξ+2\xi) and omitted the moles of NX2OX4\ce{N2O4} consumed (−ξ-\xi). The net change in total gas moles per mole of reaction is Δntotal=+2ξ−ξ=1ξ\Delta n_{\text{total}} = +2\xi - \xi = 1\xi, so ξ=0.120 mol\xi = 0.120\text{ mol}.

  4. Step 4

    rate\text{rate} = 0.0600 mol5.00 L×80.0 s\frac{0.0600\text{ mol}}{5.00\text{ L} \times 80.0\text{ s}} = 1.50 ×\times 10^{-4} M/s\text{ M/s}

    Correct

    Rate\text{Rate} = ξVΔt\frac{\xi}{V \Delta t} = 0.120 mol(5.00 L)(80.0 s)\frac{0.120\text{ mol}}{(5.00\text{ L})(80.0\text{ s})} = 3.00 ×\times 10^{-4}\text{ M}$$\cdot$$\text{s}^{-1}

    Your formula structure is sound, but this step inherited the halved reaction extent ξ=0.0600 mol\xi = 0.0600\text{ mol} from step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the rate of total pressure increase accurately in part (a).

You correctly rearranged the ideal gas law to calculate the total change in moles of gas, Δntotal=0.120 mol\Delta n_{\text{total}} = 0.120\text{ mol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient vs net gas mole change confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You related total pressure change solely to product formation rather than the net stoichiometric difference between products and reactants (Δνgas=∑νproducts−∑νreactants\Delta \nu_{\text{gas}} = \sum \nu_{\text{products}} - \sum \nu_{\text{reactants}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Change in Gas Moles
  • For a reaction a A(g)→b B(g)\ce{a A(g) -> b B(g)}, the net change in gas moles per unit extent ξ\xi is Δntotal=(b−a)ξ\Delta n_{\text{total}} = (b - a)\xi, not bξb\xi.

  • Set up an ICE mole balance to verify total moles: ntotal(t)=n0+(∑νgas)ξn_{\text{total}}(t) = n_0 + (\sum \nu_{\text{gas}})\xi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the net mole change for NX2OX4(g)→2 NOX2(g)\ce{N2O4(g) -> 2NO2(g)}: Δntotal=ΔnNOX2+ΔnNX2OX4=+2ξ−1ξ=1ξ\Delta n_{\text{total}} = \Delta n_{\ce{NO2}} + \Delta n_{\ce{N2O4}} = +2\xi - 1\xi = 1\xi.

  2. Equate with the ideal gas result: ξ=Δntotal=0.120 mol\xi = \Delta n_{\text{total}} = 0.120\text{ mol}.

  3. Calculate the average unique reaction rate: Rate=ξVΔt=0.120 mol(5.00 L)(80.0 s)=3.00×10−4 M⋅s−1\text{Rate} = \frac{\xi}{V \Delta t} = \frac{0.120\text{ mol}}{(5.00\text{ L})(80.0\text{ s})} = 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}.

Final answer

(a) ΔPtotalΔt=7.88×10−3 atm⋅s−1\frac{\Delta P_{\text{total}}}{\Delta t} = 7.88 \times 10^{-3}\text{ atm}\cdot\text{s}^{-1}; (b) Rate=3.00×10−4 M⋅s−1\text{Rate} = 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how reaction extent relates to net total moles versus individual species moles.

  • Practice using net stoichiometric coefficient Δνgas\Delta \nu_{\text{gas}} when linking manometric pressure data to reaction rate.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to divide the change in moles by the container volume of 5.00 L, expressing the reaction rate in mol/s instead of M/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔPtotalΔt=3.78 atm−3.15 atm80.0 s=0.63 atm80.0 s=7.88×10−3 atm/s\frac{\Delta P_{\text{total}}}{\Delta t} = \frac{3.78\text{ atm} - 3.15\text{ atm}}{80.0\text{ s}} = \frac{0.63\text{ atm}}{80.0\text{ s}} = 7.88 \times 10^{-3}\text{ atm/s}

  2. Step 2

    Δntotal=ΔPtotal×VR×T=0.63 atm×5.00 L0.08206 L⋅atm/(mol⋅K)×320 K=0.120 mol\Delta n_{\text{total}} = \frac{\Delta P_{\text{total}} \times V}{R \times T} = \frac{0.63\text{ atm} \times 5.00\text{ L}}{0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) \times 320\text{ K}} = 0.120\text{ mol}

  3. Step 3

    N2O4→2NO2 gives Δn=2−1=1 mol, so Δξ=0.120 mol\text{N}_2\text{O}_4 \rightarrow 2\text{NO}_2\text{ gives }\Delta n = 2 - 1 = 1\text{ mol},\text{ so }\Delta \xi = 0.120\text{ mol}

  4. Step 4

    rate=ΔξΔt=0.120 mol80.0 s=1.50×10−3 M/s\text{rate} = \frac{\Delta \xi}{\Delta t} = \frac{0.120\text{ mol}}{80.0\text{ s}} = 1.50 \times 10^{-3}\text{ M/s}

    Correct

    Rate=1VΔξΔt=0.120 mol(5.00 L)(80.0 s)=3.00×10−4 M⋅s−1\text{Rate} = \frac{1}{V}\frac{\Delta \xi}{\Delta t} = \frac{0.120\text{ mol}}{(5.00\text{ L})(80.0\text{ s})} = 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}

    You calculated the rate of mole change ΔξΔt=1.50×10−3 mol⋅s−1\frac{\Delta \xi}{\Delta t} = 1.50 \times 10^{-3}\text{ mol}\cdot\text{s}^{-1}, but labeled it as M/s\text{M/s}. Because reaction rate in M⋅s−1\text{M}\cdot\text{s}^{-1} is based on molar concentration change (M=mol⋅L−1\text{M} = \text{mol}\cdot\text{L}^{-1}), you must divide by the volume V=5.00 LV = 5.00\text{ L}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the pressure rise rate ΔPtotalΔt\frac{\Delta P_{\text{total}}}{\Delta t} in part (a).

You used the ideal gas law to convert total pressure change into total moles produced.

You accounted for the stoichiometric change in gas moles (Δngas=2−1=1\Delta n_{\text{gas}} = 2 - 1 = 1) to find the extent of reaction Δξ\Delta \xi.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Volume in Rate Definition

You divided moles by seconds and wrote the unit M/s\text{M/s} without dividing by the flask volume of 5.00 L5.00\text{ L}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the extensive reaction rate in moles per unit time (ΔξΔt\frac{\Delta \xi}{\Delta t} in mol⋅s−1\text{mol}\cdot\text{s}^{-1}) with the intensive reaction rate expressed in molar concentration per unit time (1VΔξΔt\frac{1}{V}\frac{\Delta \xi}{\Delta t} in M⋅s−1\text{M}\cdot\text{s}^{-1}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Units of Reaction Rate
  • Reaction rates expressed in M⋅s−1\text{M}\cdot\text{s}^{-1} require molarity changes: Rate=Δ[A]νAΔt=1VΔξΔt\text{Rate} = \frac{\Delta [\text{A}]}{\nu_{\text{A}} \Delta t} = \frac{1}{V}\frac{\Delta \xi}{\Delta t}.

  • Whenever you work from moles rather than molar concentrations, explicitly divide moles by the vessel volume VV before dividing by Δt\Delta t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the change in extent of reaction Δξ=0.120 mol\Delta \xi = 0.120\text{ mol} into concentration change: Δ[ξ]=ΔξV=0.120 mol5.00 L=0.0240 M\Delta [\xi] = \frac{\Delta \xi}{V} = \frac{0.120\text{ mol}}{5.00\text{ L}} = 0.0240\text{ M}.

  2. Divide by the elapsed time: Rate=Δ[ξ]Δt=0.0240 M80.0 s=3.00×10−4 M⋅s−1\text{Rate} = \frac{\Delta [\xi]}{\Delta t} = \frac{0.0240\text{ M}}{80.0\text{ s}} = 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}.

Final answer

(a) 7.88×10−3 atm⋅s−17.88 \times 10^{-3}\text{ atm}\cdot\text{s}^{-1}; (b) 3.00×10−4 M⋅s−13.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check final units carefully: verify whether the question asks for rate in mol⋅s−1\text{mol}\cdot\text{s}^{-1} (extensive) or M⋅s−1\text{M}\cdot\text{s}^{-1} (intensive).

  • When solving gas-phase kinetics with the ideal gas law, remember that [A]=PART[\text{A}] = \frac{P_{\text{A}}}{RT}, which naturally yields concentration without needing container volume.

OverviewACEpath Teacher's Diagnosis

03 The student uses Celsius temperature instead of absolute temperature in Kelvin when applying the ideal gas law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔPtotalΔt=(3.78 atm−3.15 atm)80.0 s=7.88×10−3 atm/s\frac{\Delta P_{\text{total}}}{\Delta t} = \frac{(3.78\text{ atm} - 3.15\text{ atm})}{80.0\text{ s}} = 7.88 \times 10^{-3}\text{ atm/s}

  2. Step 2

    T=320−273.15=46.85 ∘C  ⟹  Δntotal=0.63 atm×5.00 L(0.08206 L⋅atm/(mol⋅K))×46.85=0.819 molT = 320 - 273.15 = 46.85\ ^\circ\text{C} \implies \Delta n_{\text{total}} = \frac{0.63\text{ atm} \times 5.00\text{ L}}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})) \times 46.85} = 0.819\text{ mol}

    Correct

    Δntotal=ΔPtotalVRT=(0.63 atm)(5.00 L)(0.08206 L⋅atm⋅mol−1⋅K−1)(320 K)=0.120 mol\Delta n_{\text{total}} = \frac{\Delta P_{\text{total}} V}{R T} = \frac{(0.63\text{ atm})(5.00\text{ L})}{(0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(320\text{ K})} = 0.120\text{ mol}

    The temperature was already provided in absolute units (320 K320\text{ K}). The ideal gas law requires thermodynamic temperature in Kelvin so that units cancel with the gas constant RR (0.08206 L⋅atm⋅mol−1⋅K−10.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}). Converting 320 K320\text{ K} to 46.85 ∘C46.85\ ^\circ\text{C} and inserting 46.8546.85 into PV=nRTP V = n R T produces an incorrect molar quantity.

  3. Step 3

    Δξ=Δntotal=0.819 mol  ⟹  rate=0.819 mol5.00 L×80.0 s=2.05×10−3 M/s\Delta \xi = \Delta n_{\text{total}} = 0.819\text{ mol} \implies \text{rate} = \frac{0.819\text{ mol}}{5.00\text{ L} \times 80.0\text{ s}} = 2.05 \times 10^{-3}\text{ M/s}

    Correct

    rate=Δξ/VΔt=0.120 mol(5.00 L)(80.0 s)=3.00×10−4 M⋅s−1\text{rate} = \frac{\Delta \xi / V}{\Delta t} = \frac{0.120\text{ mol}}{(5.00\text{ L})(80.0\text{ s})} = 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}

    Your stoichiometric link between the extent of reaction Δξ\Delta \xi and Δntotal\Delta n_{\text{total}} was conceptually sound, but the numerical answer inherits the temperature error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the rate of increase of total pressure in part (a).

You correctly recognized that each mole of reaction increases the total gas amount by 1 mol1\text{ mol} (Δntotal=Δξ\Delta n_{\text{total}} = \Delta \xi).

You correctly related molar rate to volume and time to compute concentration change over time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit in Ideal Gas Law

Converting a temperature already given in Kelvin into Celsius and substituting Celsius into the ideal gas equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the unit requirement of the ideal gas constant RR, which uses Kelvin. When a problem provides a temperature in Kelvin, do not subtract 273.15273.15 to express it in Celsius.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Temperature Units for Gas Equations
  • The ideal gas equation PV=nRTP V = n R T strictly requires absolute temperature in Kelvin (TT in K\text{K}).

  • Inspect the units of the universal gas constant RR. Since RR contains K−1\text{K}^{-1}, ensure TT is in Kelvin before multiplying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Keep T=320 KT = 320\text{ K} without subtracting 273.15273.15.

  2. Calculate Δntotal=(0.63 atm)(5.00 L)(0.08206 L⋅atm⋅mol−1⋅K−1)(320 K)=0.11996 mol\Delta n_{\text{total}} = \frac{(0.63\text{ atm})(5.00\text{ L})}{(0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1})(320\text{ K})} = 0.11996\text{ mol}.

  3. Divide by reaction volume and time: Rate=0.11996 mol(5.00 L)(80.0 s)=2.999×10−4 M⋅s−1\text{Rate} = \frac{0.11996\text{ mol}}{(5.00\text{ L})(80.0\text{ s})} = 2.999 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}.

Final answer

(a) ΔPtotalΔt=7.88×10−3 atm⋅s−1\frac{\Delta P_{\text{total}}}{\Delta t} = 7.88 \times 10^{-3}\text{ atm}\cdot\text{s}^{-1}; (b) Rate=3.00×10−4 M⋅s−1\text{Rate} = 3.00 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether a given temperature is already in Kelvin before applying any conversion formulas.

  • Verify unit cancellation explicitly: ensure K\text{K} in the temperature cancels K−1\text{K}^{-1} in the ideal gas constant RR.

Lock it in

Similar question

01

In a rigid 2.00 L2.00\text{ L} flask at 400 K400\text{ K}, sulfur trioxide decomposes: 2 SOX3(g)→2 SOX2(g)+OX2(g)\ce{2SO3(g) -> 2SO2(g) + O2(g)}. Over 50.0 s50.0\text{ s}, the total pressure increases by 0.410 atm0.410\text{ atm}. Find the average unique reaction rate in M⋅s−1\text{M}\cdot\text{s}^{-1} (R=0.08206 L⋅atm⋅mol−1⋅K−1R = 0.08206\text{ L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}).

Answer

Rate=2.50×10−4 M⋅s−1\text{Rate} = 2.50 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}. Key steps: Δνgas=(2+1)−2=+1\Delta \nu_{\text{gas}} = (2 + 1) - 2 = +1. Therefore, Δntotal=1ξ\Delta n_{\text{total}} = 1\xi. From ideal gas law, ξ=Δntotal=ΔP⋅VRT=(0.410)(2.00)(0.08206)(400)=0.02498 mol\xi = \Delta n_{\text{total}} = \frac{\Delta P \cdot V}{R T} = \frac{(0.410)(2.00)}{(0.08206)(400)} = 0.02498\text{ mol}. Unique rate =ξVΔt=0.02498(2.00)(50.0)=2.50×10−4 M⋅s−1= \frac{\xi}{V \Delta t} = \frac{0.02498}{(2.00)(50.0)} = 2.50 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}.

02

The gas-phase synthesis of ammonia is carried out in a rigid 10.0 L10.0\text{ L} vessel at 500 K500\text{ K}: NX2(g)+3 HX2(g)→2 NHX3(g)\ce{N2(g) + 3H2(g) -> 2NH3(g)}. Over 120 s120\text{ s}, the total vessel pressure drops from 8.00 atm8.00\text{ atm} to 6.50 atm6.50\text{ atm}. Calculate the average rate of consumption of HX2\ce{H2} in M⋅s−1\text{M}\cdot\text{s}^{-1}.

Answer

Average rate of consumption of HX2=9.14×10−4 M⋅s−1\ce{H2} = 9.14 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}. Key steps: Δνgas=2−(1+3)=−2\Delta \nu_{\text{gas}} = 2 - (1 + 3) = -2. Change in pressure ΔPtotal=−1.50 atm\Delta P_{\text{total}} = -1.50\text{ atm}. Net mole change Δntotal=(−1.50 atm)(10.0 L)(0.08206)(500 K)=−0.3656 mol\Delta n_{\text{total}} = \frac{(-1.50\text{ atm})(10.0\text{ L})}{(0.08206)(500\text{ K})} = -0.3656\text{ mol}. Since Δntotal=−2ξ\Delta n_{\text{total}} = -2\xi, ξ=0.1828 mol\xi = 0.1828\text{ mol}. Moles of HX2\ce{H2} consumed =3ξ=0.5484 mol= 3\xi = 0.5484\text{ mol}. Rate of consumption =−Δ[HX2]Δt=0.5484 mol(10.0 L)(120 s)=4.57×10−4×2=9.14×10−4 M⋅s−1= -\frac{\Delta [\ce{H2}]}{\Delta t} = \frac{0.5484\text{ mol}}{(10.0\text{ L})(120\text{ s})} = 4.57 \times 10^{-4} \times 2 = 9.14 \times 10^{-4}\text{ M}\cdot\text{s}^{-1}.

03

A generic decomposition 2 A(g)→B(g)+3 C(g)\ce{2A(g) -> B(g) + 3C(g)} occurs at constant temperature TT and volume VV. Express the unique reaction rate Rate\text{Rate} directly in terms of dPtotaldt\frac{d P_{\text{total}}}{dt}, RR, and TT.

Answer

Rate=12RT(dPtotaldt)\text{Rate} = \frac{1}{2 R T}\left(\frac{d P_{\text{total}}}{dt}\right). Key steps: Net stoichiometric change in gas moles is Δνgas=(1+3)−2=+2\Delta \nu_{\text{gas}} = (1 + 3) - 2 = +2. By the ideal gas law, Ptotal=ntotalRTVP_{\text{total}} = \frac{n_{\text{total}} R T}{V}, so dPtotaldt=RTVdntotaldt=RTV(Δνgas)dξdt=2RT(1Vdξdt)\frac{d P_{\text{total}}}{dt} = \frac{R T}{V}\frac{d n_{\text{total}}}{dt} = \frac{R T}{V}(\Delta \nu_{\text{gas}})\frac{d\xi}{dt} = 2 R T \left(\frac{1}{V}\frac{d\xi}{dt}\right). Since unique Rate=1Vdξdt\text{Rate} = \frac{1}{V}\frac{d\xi}{dt}, substituting gives Rate=12RT(dPtotaldt)\text{Rate} = \frac{1}{2 R T}\left(\frac{d P_{\text{total}}}{dt}\right).

Loading workspace…