Resources

Consider two separate 0.0200 M0.0200\text{ M} aqueous solutions at 25.0∘C25.0^\circ\text{C}: Solution A contains barium hydroxide, Ba(OH)2\text{Ba(OH)}_2, and Solution B contains sodium hydroxide, NaOH\text{NaOH}. Classify both substances as strong bases, weak bases, strong acids, or weak acids, and calculate the hydroxide ion concentration [OH−][\text{OH}^-] and final pH\text{pH} of each solution, specifically taking into account stoichiometric dissociation coefficients to avoid the common monoprotic-equivalence trap.

Answer and steps

Final answer

Both Ba(OH)2\text{Ba(OH)}_2 and NaOH\text{NaOH} are strong bases; Solution A (textBa(OH)2\\text{Ba(OH)}_2): [OH−]=0.0400 M[\text{OH}^-] = 0.0400\text{ M}, pH=12.602\text{pH} = 12.602; Solution B (NaOH\text{NaOH}): [OH−]=0.0200 M[\text{OH}^-] = 0.0200\text{ M}, pH=12.301\text{pH} = 12.301

Steps

01

Classify the Substances

Soluble metal hydroxides formed by Group 1 alkali metals and Group 2 alkaline earth metals (such as Ba(OH)X2\ce{Ba(OH)2}) dissociate completely in dilute aqueous solution:

  • Ba(OH)X2\ce{Ba(OH)2} is a strong base.
  • NaOH\ce{NaOH} is a strong base.

Because both are strong bases, neither exists in an equilibrium with undissociated formula units in solution; dissociation is 100%100\% complete.


02

Determine [OHX−][\ce{OH-}] and pH\text{pH} for Solution A (Ba(OH)X2\ce{Ba(OH)2})

Write the dissociation equation: Ba(OH)X2(s)→BaX2+(aq)+2 OHX−(aq)\ce{Ba(OH)2(s) -> Ba^{2+}(aq) + 2 OH^-(aq)}

Barium hydroxide is a diacidic (dibasic) base, yielding two hydroxide ions for every one formula unit dissolved: [OHX−]=2⋅[Ba(OH)X2]=2⋅0.0200 M=0.0400 M[\ce{OH-}] = 2 \cdot [\ce{Ba(OH)2}] = 2 \cdot 0.0200\text{ M} = 0.0400\text{ M}

Common Pitfall: Assuming that equal molar concentrations of bases always produce identical hydroxide concentrations. Ignoring the stoichiometric factor of 22 for Ba(OH)X2\ce{Ba(OH)2} results in an underestimated [OHX−][\ce{OH-}] and an incorrect pH\text{pH}.

Next, calculate the pOH\text{pOH} at 25.0∘C25.0^\circ\text{C}: pOH=−log⁡10[OHX−]=−log⁡10(0.0400)≈1.398\text{pOH} = -\log_{10}[\ce{OH-}] = -\log_{10}(0.0400) \approx 1.398

Using pH+pOH=14.000\text{pH} + \text{pOH} = 14.000 at 25.0∘C25.0^\circ\text{C}: pH=14.000−1.398=12.602\text{pH} = 14.000 - 1.398 = 12.602


03

Determine [OHX−][\ce{OH-}] and pH\text{pH} for Solution B (NaOH\ce{NaOH})

Write the dissociation equation: NaOH(s)→NaX+(aq)+OHX−(aq)\ce{NaOH(s) -> Na^+(aq) + OH^-(aq)}

Sodium hydroxide is a monoacidic (monobasic) base, releasing one hydroxide ion per formula unit: [OHX−]=1⋅[NaOH]=0.0200 M[\ce{OH-}] = 1 \cdot [\ce{NaOH}] = 0.0200\text{ M}

Calculate the pOH\text{pOH}: pOH=−log⁡10[OHX−]=−log⁡10(0.0200)≈1.699\text{pOH} = -\log_{10}[\ce{OH-}] = -\log_{10}(0.0200) \approx 1.699

Calculate the pH\text{pH}: pH=14.000−1.699=12.301\text{pH} = 14.000 - 1.699 = 12.301

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the 1:2 stoichiometry of barium hydroxide dissociation and assumes [OH⁻] equals the base concentration, yielding an incorrect [OH⁻] of 0.0200 M and pH of 12.301 for Solution A.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ba(OH)2 is a strong base.\text{Ba(OH)}_2\text{ is a strong base.}

  2. Step 2

    [OH−]=0.0200 M[\text{OH}^-] = 0.0200\text{ M}

    Correct

    [OH−]=2×[Ba(OH)2]=2×0.0200 M=0.0400 M[\text{OH}^-] = 2 \times [\text{Ba(OH)}_2] = 2 \times 0.0200\text{ M} = 0.0400\text{ M}

    Barium hydroxide is a dihydroxy base that dissociates according to Ba(OH)2→Ba2++2OH−\text{Ba(OH)}_2 \rightarrow \text{Ba}^{2+} + 2\text{OH}^-. Because each formula unit releases two hydroxide ions, the hydroxide concentration is double the concentration of the dissolved base.

  3. Step 3

    pOH=−log⁡(0.0200)=1.70  ⟹  pH=14.00−1.70=12.30\text{pOH} = -\log(0.0200) = 1.70 \implies \text{pH} = 14.00 - 1.70 = 12.30

    Correct

    pOH=−log⁡(0.0400)≈1.398  ⟹  pH=14.000−1.398=12.602\text{pOH} = -\log(0.0400) \approx 1.398 \implies \text{pH} = 14.000 - 1.398 = 12.602

    Your logarithmic calculation and relationship pH=14−pOH\text{pH} = 14 - \text{pOH} were executed correctly, but your final numerical values were thrown off by the incorrect [OH−][\text{OH}^-] carried over from Step 2.

  4. Step 4

    NaOH is a strong base.\text{NaOH is a strong base.}

  5. Step 5

    [OH−]=0.0200 M  ⟹  pOH=−log⁡(0.0200)=1.70  ⟹  pH=14.00−1.70=12.30[\text{OH}^-] = 0.0200\text{ M} \implies \text{pOH} = -\log(0.0200) = 1.70 \implies \text{pH} = 14.00 - 1.70 = 12.30

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified both Ba(OH)2\text{Ba(OH)}_2 and NaOH\text{NaOH} as strong bases.

You correctly applied the 1:11:1 dissociation stoichiometry to calculate [OH−][\text{OH}^-] for NaOH\text{NaOH}.

You successfully used the definitions of pOH\text{pOH} and pH+pOH=14\text{pH} + \text{pOH} = 14 to compute the pH values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Dissociation Stoichiometry

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that [OH−][\text{OH}^-] equals the analytical concentration of the base without writing out the balanced chemical dissociation equation to check the stoichiometric coefficient of hydroxide ions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dissociation Stoichiometry Check
  • For a strong metal hydroxide M(OH)n\text{M(OH)}_n, [OH−]=n×[M(OH)n][\text{OH}^-] = n \times [\text{M(OH)}_n].

  • Always write the complete chemical dissociation equation before assigning ion concentrations from molarity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced dissociation equation: Ba(OH)2(s)→Ba2+(aq)+2OH−(aq)\text{Ba(OH)}_2(s) \rightarrow \text{Ba}^{2+}(aq) + 2\text{OH}^-(aq).

  2. Multiply the analytical concentration by the stoichiometric coefficient: [OH−]=2×0.0200 M=0.0400 M[\text{OH}^-] = 2 \times 0.0200\text{ M} = 0.0400\text{ M}.

  3. Calculate the pOH\text{pOH}: pOH=−log⁡(0.0400)≈1.398\text{pOH} = -\log(0.0400) \approx 1.398.

  4. Calculate the final pH\text{pH}: pH=14.000−1.398=12.602\text{pH} = 14.000 - 1.398 = 12.602.

Final answer

Solution A: [OH−]=0.0400 M[\text{OH}^-] = 0.0400\text{ M}, pH=12.602\text{pH} = 12.602; Solution B: [OH−]=0.0200 M[\text{OH}^-] = 0.0200\text{ M}, pH=12.301\text{pH} = 12.301

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating pH\text{pH} or pOH\text{pOH}, write down the full ionic dissociation equation for the strong electrolyte.

  • Inspect the subscript on hydroxide in the chemical formula to determine whether n=1n = 1, 22, or 33.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the calculated value of -log[OH⁻] directly as pH rather than pOH, reporting an acidic pH for both strong base solutions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ba(OH)X2 is a strong base.  ⟹  [OHX−]=2×0.0200 M=0.0400 M\ce{Ba(OH)2}\text{ is a strong base.} \implies [\ce{OH-}] = 2 \times 0.0200\text{ M} = 0.0400\text{ M}

  2. Step 2

    pH=−log⁡(0.0400)=1.40\text{pH} = -\log(0.0400) = 1.40

    Correct

    pOH=−log⁡(0.0400)=1.398  ⟹  pH=14.000−1.398=12.602\text{pOH} = -\log(0.0400) = 1.398 \implies \text{pH} = 14.000 - 1.398 = 12.602

    Calculating −log⁡[OHX−]-\log[\ce{OH-}] yields pOH\text{pOH}, not pH\text{pH}. At 25.0∘C25.0^\circ\text{C}, you must subtract pOH\text{pOH} from 14.00014.000 to obtain the pH\text{pH}.

  3. Step 3

    NaOH is a strong base.  ⟹  [OHX−]=0.0200 M\ce{NaOH}\text{ is a strong base.} \implies [\ce{OH-}] = 0.0200\text{ M}

  4. Step 4

    pH=−log⁡(0.0200)=1.70\text{pH} = -\log(0.0200) = 1.70

    Correct

    pOH=−log⁡(0.0200)=1.699  ⟹  pH=14.000−1.699=12.301\text{pOH} = -\log(0.0200) = 1.699 \implies \text{pH} = 14.000 - 1.699 = 12.301

    As in Solution A, −log⁡(0.0200)-\log(0.0200) gives pOH≈1.70\text{pOH} \approx 1.70, so the final pH\text{pH} is 14.000−1.699=12.30114.000 - 1.699 = 12.301.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified both Ba(OH)X2\ce{Ba(OH)2} and NaOH\ce{NaOH} as strong bases.

You properly applied the stoichiometric factor of 22 for the complete dissociation of dihydroxide base Ba(OH)X2\ce{Ba(OH)2}.

You correctly evaluated the negative logarithm of the hydroxide ion concentrations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing pH and pOH Definitions

You assigned the label pH\text{pH} to the negative logarithm of hydroxide concentration rather than pOH\text{pOH}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating −log⁡[OHX−]-\log[\ce{OH-}] with pH\text{pH} instead of recognizing that the negative logarithm of a species concentration defines the 'p' of that specific species (i.e., −log⁡[OHX−]=pOH-\log[\ce{OH-}] = \text{pOH} and −log⁡[HX3OX+]=pH-\log[\ce{H3O+}] = \text{pH}). Consequently, calculating pH\text{pH} from [OHX−][\ce{OH-}] requires using pH+pOH=14\text{pH} + \text{pOH} = 14 or Kw=[HX3OX+][OHX−]=1.0×10−14K_w = [\ce{H3O+}][\ce{OH-}] = 1.0 \times 10^{-14}.

REASONING PATH
Your ACEpath teacher’s suggested approach
p-Function Definition
  • The operator pX\text{p}X denotes −log⁡10[X]-\log_{10}[X]. Thus, −log⁡[HX+]=pH-\log[\ce{H+}] = \text{pH} while −log⁡[OHX−]=pOH-\log[\ce{OH-}] = \text{pOH}.

  • Always label −log⁡[OHX−]-\log[\ce{OH-}] as pOH\text{pOH} first.

Acid-Base Sanity Check
  • At 25∘C25^\circ\text{C}, any basic solution must have pH>7\text{pH} > 7 and pOH<7\text{pOH} < 7.

  • If you calculate a pH<7\text{pH} < 7 for a solution of a strong base, immediately check whether you forgot to subtract your value from 14.0014.00.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For Solution A: pOH=−log⁡(0.0400)=1.398\text{pOH} = -\log(0.0400) = 1.398

  2. pHA=14.000−pOH=14.000−1.398=12.602\text{pH}_\text{A} = 14.000 - \text{pOH} = 14.000 - 1.398 = 12.602

  3. For Solution B: pOH=−log⁡(0.0200)=1.699\text{pOH} = -\log(0.0200) = 1.699

  4. pHB=14.000−pOH=14.000−1.699=12.301\text{pH}_\text{B} = 14.000 - \text{pOH} = 14.000 - 1.699 = 12.301

Final answer

Both are strong bases; Solution A: [OHX−]=0.0400 M[\ce{OH-}] = 0.0400\text{ M}, pH=12.602\text{pH} = 12.602; Solution B: [OHX−]=0.0200 M[\ce{OH-}] = 0.0200\text{ M}, pH=12.301\text{pH} = 12.301

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out both formulas pOH=−log⁡[OHX−]\text{pOH} = -\log[\ce{OH-}] and pH=14.00−pOH\text{pH} = 14.00 - \text{pOH} explicitly before plugging in numbers.

  • Perform a sanity check on every final pH\text{pH}: basic solutions must yield pH>7\text{pH} > 7 at 25∘C25^\circ\text{C}.

OverviewACEpath Teacher's Diagnosis

03 The student divides by the stoichiometric coefficient 2 instead of multiplying by it when finding [OH⁻] for barium hydroxide, obtaining [OH⁻] = 0.0100 M and pH = 12.00.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Ba(OH)2 is a strong base.\text{Ba(OH)}_2\text{ is a strong base.}

  2. Step 2

    [OH−]=0.02002=0.0100 M[\text{OH}^-] = \frac{0.0200}{2} = 0.0100\text{ M}

    Correct

    [OH−]=2×0.0200 M=0.0400 M[\text{OH}^-] = 2 \times 0.0200\text{ M} = 0.0400\text{ M}

    Each mole of Ba(OH)2\text{Ba(OH)}_2 produces two moles of OH−\text{OH}^- upon complete dissociation: Ba(OH)2→Ba2++2OH−\text{Ba(OH)}_2 \rightarrow \text{Ba}^{2+} + 2\text{OH}^-. Therefore, you must multiply the molarity by 2 rather than divide.

  3. Step 3

    pOH=−log⁡(0.0100)=2.00  ⟹  pH=14.00−2.00=12.00\text{pOH} = -\log(0.0100) = 2.00 \implies \text{pH} = 14.00 - 2.00 = 12.00

    Correct

    pOH=−log⁡(0.0400)≈1.398  ⟹  pH=14.000−1.398=12.602\text{pOH} = -\log(0.0400) \approx 1.398 \implies \text{pH} = 14.000 - 1.398 = 12.602

    Your log calculation and pH+pOH=14\text{pH} + \text{pOH} = 14 formula were carried out correctly, but the numerical result was affected by the initial [extOH−][ ext{OH}^-] value.

  4. Step 4

    NaOH is a strong base.  ⟹  [OH−]=0.0200 M\text{NaOH is a strong base.} \implies [\text{OH}^-] = 0.0200\text{ M}

  5. Step 5

    pOH=−log⁡(0.0200)=1.70  ⟹  pH=14.00−1.70=12.30\text{pOH} = -\log(0.0200) = 1.70 \implies \text{pH} = 14.00 - 1.70 = 12.30

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified both Ba(OH)2\text{Ba(OH)}_2 and NaOH\text{NaOH} as strong bases.

You correctly applied the relationship pH=14−pOH\text{pH} = 14 - \text{pOH} to compute pH\text{pH} from hydroxide molarity.

You accurately solved the entire calculation for the NaOH\text{NaOH} solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometric coefficient inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the stoichiometric mole ratio by dividing by 2 instead of multiplying by 2. When a compound contains multiple copies of an ion per formula unit, each formula unit yields multiple ions, so the resulting ion concentration must be greater than the parent compound concentration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Write the dissociation equation first
  • For a strong electrolyte MxAy→xMy++yAx−M_x A_y \rightarrow x M^{y+} + y A^{x-}, the ion concentration is [Ax−]=y×[MxAy][A^{x-}] = y \times [M_x A_y].

  • Always write out the complete balanced dissociation equation and check that the ion concentration is greater than the solute concentration whenever the subscript is greater than 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the balanced dissociation reaction: Ba(OH)2(aq)→Ba2+(aq)+2OH−(aq)\text{Ba(OH)}_2(aq) \rightarrow \text{Ba}^{2+}(aq) + 2\text{OH}^-(aq).

  2. Multiply the base concentration by 2: [OH−]=2×0.0200 M=0.0400 M[\text{OH}^-] = 2 \times 0.0200\text{ M} = 0.0400\text{ M}.

  3. Calculate pOH\text{pOH}: pOH=−log⁡(0.0400)≈1.398\text{pOH} = -\log(0.0400) \approx 1.398.

  4. Calculate pH\text{pH}: pH=14.000−1.398=12.602\text{pH} = 14.000 - 1.398 = 12.602.

Final answer

Solution A (Ba(OH)2\text{Ba(OH)}_2): [OH−]=0.0400 M[\text{OH}^-] = 0.0400\text{ M}, pH=12.602\text{pH} = 12.602; Solution B (NaOH\text{NaOH}): [OH−]=0.0200 M[\text{OH}^-] = 0.0200\text{ M}, pH=12.301\text{pH} = 12.301

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting formula units into ion concentrations by writing out the explicit chemical dissociation equation before plugging in numbers.

  • Perform a quick sanity check on base solutions: a dibasic base at the same molarity as a monobasic base must produce a higher [extOH−][ ext{OH}^-] and therefore a higher extpH ext{pH}.

Lock it in

Similar question

01

Calculate [OH−][\text{OH}^-] and the pH\text{pH} of a 0.0050 M0.0050\text{ M} aqueous solution of strontium hydroxide, Sr(OH)2\text{Sr(OH)}_2, at 25.0∘C25.0^\circ\text{C}.

Answer

[OH−]=0.010 M[\text{OH}^-] = 0.010\text{ M}, pH=12.00\text{pH} = 12.00. Key steps: Sr(OH)2→Sr2++2OH−\text{Sr(OH)}_2 \rightarrow \text{Sr}^{2+} + 2\text{OH}^-, so [OH−]=2(0.0050 M)=0.010 M[\text{OH}^-] = 2(0.0050\text{ M}) = 0.010\text{ M}; pOH=−log⁡(0.010)=2.00\text{pOH} = -\log(0.010) = 2.00, and pH=14.00−2.00=12.00\text{pH} = 14.00 - 2.00 = 12.00.

02

Compare the pH\text{pH} of a 0.010 M HCl0.010\text{ M}\ \text{HCl} solution to that of a 0.010 M H2SO40.010\text{ M}\ \text{H}_2\text{SO}_4 solution (assuming complete dissociation of both protons in sulfuric acid). Which solution has the lower pH\text{pH}, and what is the difference in pH\text{pH}?

Answer

The H2SO4\text{H}_2\text{SO}_4 solution has the lower pH\text{pH} by approximately 0.30 pH0.30\text{ pH} units. Key steps: [H+]HCl=0.010 M  ⟹  pH=2.00[\text{H}^+]_{\text{HCl}} = 0.010\text{ M} \implies \text{pH} = 2.00; [H+]H2SO4=2(0.010 M)=0.020 M  ⟹  pH=−log⁡(0.020)=1.70[\text{H}^+]_{\text{H}_2\text{SO}_4} = 2(0.010\text{ M}) = 0.020\text{ M} \implies \text{pH} = -\log(0.020) = 1.70; difference is 2.00−1.70=0.302.00 - 1.70 = 0.30.

03

A student dissolves 0.171 g0.171\text{ g} of solid barium hydroxide, Ba(OH)2\text{Ba(OH)}_2 (molar mass =171.34 g/mol= 171.34\text{ g/mol}), in enough water to prepare 500.0 mL500.0\text{ mL} of solution at 25.0∘C25.0^\circ\text{C}. Calculate the molarity of the solution, [OH−][\text{OH}^-], and the final pH\text{pH}.

Answer

Molarity =0.00200 M= 0.00200\text{ M}, [OH−]=0.00400 M[\text{OH}^-] = 0.00400\text{ M}, pH=11.602\text{pH} = 11.602. Key steps: moles=0.171 g/171.34 g/mol≈0.00100 mol\text{moles} = 0.171\text{ g} / 171.34\text{ g/mol} \approx 0.00100\text{ mol}; M=0.00100 mol/0.5000 L=0.00200 MM = 0.00100\text{ mol} / 0.5000\text{ L} = 0.00200\text{ M}; [OH−]=2×0.00200 M=0.00400 M[\text{OH}^-] = 2 \times 0.00200\text{ M} = 0.00400\text{ M}; pOH=−log⁡(0.00400)=2.398  ⟹  pH=14.000−2.398=11.602\text{pOH} = -\log(0.00400) = 2.398 \implies \text{pH} = 14.000 - 2.398 = 11.602.

Loading workspace…