Resources

A student investigates four elements: Barium (Ba\text{Ba}), Germanium (Ge\text{Ge}), Bromine (Br\text{Br}), and Cobalt (Co\text{Co}). Calculate the ratio R=NmNnm+NmetR = \frac{N_m}{N_{nm} + N_{met}}, where NmN_m is the count of metals, NnmN_{nm} is the count of nonmetals, and NmetN_{met} is the count of metalloids among the four elements. Express the final ratio as an exact simplified fraction.

Answer and steps

Final answer

11\frac{1}{1} (or 11), since there are 22 metals (Ba\text{Ba}, Co\text{Co}), 11 nonmetal (Br\text{Br}), and 11 metalloid (Ge\text{Ge}), yielding R=21+1=22=1R = \frac{2}{1 + 1} = \frac{2}{2} = 1.

Steps

01

Classify each element based on its position in the periodic table

To find the ratio R=NmNnm+NmetR = \frac{N_m}{N_{nm} + N_{met}}, classify each given element into one of the three broad categories on the periodic table: metals, nonmetals, or metalloids.

  • Barium (Ba\ce{Ba}, atomic number 5656): Located in Group 2 (the alkaline earth metals). Because it lies on the far left side of the periodic table, it is a metal.
  • Cobalt (Co\ce{Co}, atomic number 2727): Located in Group 9 in the d-block (transition elements). It is a metal.
  • Germanium (Ge\ce{Ge}, atomic number 3232): Located in Group 14 along the dividing staircase line between metals and nonmetals. It exhibits intermediate electrical and physical properties, classifying it as a metalloid (semimetal).
  • Bromine (Br\ce{Br}, atomic number 3535): Located in Group 17 (the halogens) on the upper right side of the periodic table. It is a nonmetal.

02

Count the elements in each category

  • Number of metals (NmN_m): 22 (Ba\ce{Ba}, Co\ce{Co})
  • Number of nonmetals (NnmN_{nm}): 11 (Br\ce{Br})
  • Number of metalloids (NmetN_{met}): 11 (Ge\ce{Ge})

03

Compute the ratio RR

Substitute the counted values into the formula:

R=NmNnm+Nmet=21+1=22=1R = \frac{N_m}{N_{nm} + N_{met}} = \frac{2}{1 + 1} = \frac{2}{2} = 1

Expressed as a simplified fraction, this equals 11\frac{1}{1} (or simply 11).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misclassifies germanium as a metal instead of a metalloid, leading to an incorrect count and ratio of 3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Metals: Ba, Co, Ge  ⟹  Nm=3\text{Metals: Ba, Co, Ge} \implies N_m = 3, Nonmetals: Br  ⟹  Nnm=1\text{Nonmetals: Br} \implies N_{nm} = 1, Metalloids: None  ⟹  Nmet=0\text{Metalloids: None} \implies N_{met} = 0

    Correct

    Metals: Ba, Co  ⟹  Nm=2\text{Metals: Ba, Co} \implies N_m = 2, Nonmetals: Br  ⟹  Nnm=1\text{Nonmetals: Br} \implies N_{nm} = 1, Metalloids: Ge  ⟹  Nmet=1\text{Metalloids: Ge} \implies N_{met} = 1

    You correctly identified barium (Ba\text{Ba}) and cobalt (Co\text{Co}) as metals and bromine (Br\text{Br}) as a nonmetal. However, germanium (Ge\text{Ge}) lies on the staircase boundary in Group 14 and is classified as a metalloid.

  2. Step 2

    R=31+0=31=3R = \frac{3}{1 + 0} = \frac{3}{1} = 3

    Correct

    R=21+1=22=1R = \frac{2}{1 + 1} = \frac{2}{2} = 1

    You evaluated the fraction accurately based on your counts, but the value is incorrect because it inherited the wrong element counts from the first step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified barium and cobalt as metals.

You correctly identified bromine as a nonmetal.

You substituted your counts into the target ratio formula and simplified the fraction correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metalloid Misclassification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated germanium as a post-transition metal rather than recognizing it as one of the seven classic metalloids along the periodic table staircase.

REASONING PATH
Your ACEpath teacher’s suggested approach
Staircase Elements (Metalloids)
  • The commonly recognized metalloids bordering the staircase are B\text{B}, Si\text{Si}, Ge\text{Ge}, As\text{As}, Sb\text{Sb}, Te\text{Te}, and Po\text{Po} (or At\text{At}).

  • When classifying p-block elements in Groups 13–16, check whether the element sits directly on the staircase line before labeling it as a metal or nonmetal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the categories: Ba\text{Ba} (metal, Group 2), Co\text{Co} (metal, Group 9), Br\text{Br} (nonmetal, Group 17), and Ge\text{Ge} (metalloid, Group 14).

  2. Count each category: Nm=2N_m = 2, Nnm=1N_{nm} = 1, and Nmet=1N_{met} = 1.

  3. Substitute these values into the ratio: R=NmNnm+Nmet=21+1=22=1R = \frac{N_m}{N_{nm} + N_{met}} = \frac{2}{1 + 1} = \frac{2}{2} = 1.

Final answer

11\frac{1}{1} (or 11)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the key metalloids along the diagonal staircase: Boron (B\text{B}), Silicon (Si\text{Si}), Germanium (Ge\text{Ge}), Arsenic (As\text{As}), Antimony (Sb\text{Sb}), and Tellurium (Te\text{Te}).

  • Practice identifying elements near the metal-nonmetal boundary by finding their exact row and group on a blank periodic table outline.

OverviewACEpath Teacher's Diagnosis

02 The student misclassifies germanium as a nonmetal rather than a metalloid, confusing metalloids with nonmetals and yielding a ratio of 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Metals: Ba,Co  ⟹  Nm=2\text{Metals: } \text{Ba}, \text{Co} \implies N_m = 2

  2. Step 2

    Nonmetals: Br,Ge  ⟹  Nnm=2 and Metalloids: none  ⟹  Nmet=0\text{Nonmetals: } \text{Br}, \text{Ge} \implies N_{nm} = 2 \text{ and Metalloids: none} \implies N_{met} = 0

    Correct

    Nonmetals: Br  ⟹  Nnm=1 and Metalloids: Ge  ⟹  Nmet=1\text{Nonmetals: } \text{Br} \implies N_{nm} = 1 \text{ and Metalloids: } \text{Ge} \implies N_{met} = 1

    Germanium (Ge\text{Ge}) is located along the dividing staircase line in Group 14 and is a metalloid (semimetal), not a nonmetal.

  3. Step 3

    R=22+0=22=1R = \frac{2}{2 + 0} = \frac{2}{2} = 1

    Correct

    R=21+1=22=1R = \frac{2}{1 + 1} = \frac{2}{2} = 1

    Your evaluation used the erroneous counts Nnm=2N_{nm} = 2 and Nmet=0N_{met} = 0. Although the denominator sum Nnm+Nmet=2N_{nm} + N_{met} = 2 happened to yield 11 by coincidence, the substitution relied on the misclassified elements from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified Barium as an alkaline earth metal and Cobalt as a transition metal.

You correctly substituted your counts into the ratio formula and simplified the fraction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metalloid Misclassification

You categorized Germanium (Ge\text{Ge}) as a nonmetal instead of identifying it as a metalloid along the staircase boundary.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the metalloid boundary line on the periodic table and grouping semimetals in Group 14 together with typical nonmetals.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Metalloids via the Staircase
  • Elements along the diagonal staircase dividing metals from nonmetals—specifically Boron (B\text{B}), Silicon (Si\text{Si}), Germanium (Ge\text{Ge}), Arsenic (As\text{As}), Antimony (Sb\text{Sb}), Tellurium (Te\text{Te}), and Polonium (Po\text{Po})—are metalloids.

  • Before placing an element into the nonmetal category, verify whether it sits directly on the boundary staircase line.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Reclassify Germanium (Ge\text{Ge}, atomic number 3232) as a metalloid, giving Nmet=1N_{met} = 1.

  2. Identify Bromine (Br\text{Br}, atomic number 3535) as the only nonmetal, giving Nnm=1N_{nm} = 1.

  3. Substitute the corrected values into the ratio: R=NmNnm+Nmet=21+1=22=1R = \frac{N_m}{N_{nm} + N_{met}} = \frac{2}{1 + 1} = \frac{2}{2} = 1.

Final answer

11\frac{1}{1} (or 11)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the seven common metalloids located along the periodic table dividing line: B\text{B}, Si\text{Si}, Ge\text{Ge}, As\text{As}, Sb\text{Sb}, Te\text{Te}, and Po\text{Po}.

  • Practice distinguishing p-block metals (e.g., Al\text{Al}, Ga\text{Ga}, Sn\text{Sn}, Pb\text{Pb}) and metalloids from true nonmetals.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the formula to calculate the ratio of non-metals and metalloids to metals, resulting in the reciprocal fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Nm=2 (Ba,Co)  ⟹  Nnm=1 (Br)  ⟹  Nmet=1 (Ge)N_m = 2\ (\text{Ba}, \text{Co}) \implies N_{nm} = 1\ (\text{Br}) \implies N_{met} = 1\ (\text{Ge})

  2. Step 2

    R=Nnm+NmetNm=1+12=22=1R = \frac{N_{nm} + N_{met}}{N_m} = \frac{1 + 1}{2} = \frac{2}{2} = 1

    Correct

    R=NmNnm+Nmet=21+1=22=1R = \frac{N_m}{N_{nm} + N_{met}} = \frac{2}{1 + 1} = \frac{2}{2} = 1

    You inverted the formula given in the problem statement. The question asks for R=NmNnm+NmetR = \frac{N_m}{N_{nm} + N_{met}} with metals in the numerator. While 22=22=1\frac{2}{2} = \frac{2}{2} = 1 yielded the correct final number by coincidence, inverting the formula would lead to an incorrect reciprocal answer for any other set of elements.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all four elements into metals, nonmetals, and metalloids based on their positions in the periodic table.

You found the correct counts for each category (Nm=2N_m = 2, Nnm=1N_{nm} = 1, Nmet=1N_{met} = 1).

You performed the arithmetic accurately and simplified the fraction fully.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Ratio Formula

You placed the sum (Nnm+Nmet)(N_{nm} + N_{met}) in the numerator and NmN_m in the denominator instead of following the given formula R=NmNnm+NmetR = \frac{N_m}{N_{nm} + N_{met}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Transposing the numerator and denominator when translating the problem statement into an algebraic expression. Although both the numerator and denominator evaluated to 22 in this specific problem, setting up the reciprocal ratio is a conceptual error that fails whenever the numerator and denominator differ.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match the Given Ratio Definition
  • In a fraction AB\frac{A}{B}, the quantity described first or placed on top must stay in the numerator.

  • Before calculating, re-read the symbol definition in the prompt and verify that the numerator matches NmN_m and the denominator matches Nnm+NmetN_{nm} + N_{met}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write down the target formula exactly as defined in the question: R=NmNnm+NmetR = \frac{N_m}{N_{nm} + N_{met}}.

  2. Substitute your correct category counts into the formula: R=21+1R = \frac{2}{1 + 1}.

  3. Simplify the resulting fraction: R=22=11=1R = \frac{2}{2} = \frac{1}{1} = 1.

Final answer

11 (or 11\frac{1}{1})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always double-check that your written algebraic formula matches the problem's numerator and denominator before substituting numerical values.

  • Be cautious of 'accidental matches': verify your intermediate expressions even when the final number seems straightforward.

Lock it in

Similar question

01

A sample contains one atom each of Aluminum (Al\text{Al}), Silicon (Si\text{Si}), Sulfur (S\text{S}), and Argon (Ar\text{Ar}). What is the ratio of nonmetals to non-nonmetals (metals plus metalloids), R=NnmNm+NmetR = \frac{N_{nm}}{N_m + N_{met}}?

Answer

11 (or 11\frac{1}{1}). Al\text{Al} is a metal (Nm=1N_m = 1), Si\text{Si} is a metalloid (Nmet=1N_{met} = 1), and S\text{S} and Ar\text{Ar} are nonmetals (Nnm=2N_{nm} = 2). Thus, R=21+1=1R = \frac{2}{1 + 1} = 1.

02

Consider the Period 4 elements: Potassium (K\text{K}), Zinc (Zn\text{Zn}), Arsenic (As\text{As}), and Selenium (Se\text{Se}). Calculate R=NmetNm×NnmR = \frac{N_{met}}{N_m \times N_{nm}}. Express your answer as a simplified fraction.

Answer

12\frac{1}{2}. K\text{K} and Zn\text{Zn} are metals (Nm=2N_m = 2), As\text{As} is a metalloid (Nmet=1N_{met} = 1), and Se\text{Se} is a nonmetal (Nnm=1N_{nm} = 1). Substituting gives R=12×1=12R = \frac{1}{2 \times 1} = \frac{1}{2}.

03

An alloy and semiconductor mixture is analyzed for five elements: Antimony (Sb\text{Sb}), Tellurium (Te\text{Te}), Tin (Sn\text{Sn}), Iodine (I\text{I}), and Lead (Pb\text{Pb}). Calculate the ratio of metalloids to metals, R=NmetNmR = \frac{N_{met}}{N_m}.

Answer

11 (or 11\frac{1}{1}). Sn\text{Sn} and Pb\text{Pb} are metals (Nm=2N_m = 2), Sb\text{Sb} and Te\text{Te} are metalloids (Nmet=2N_{met} = 2), and I\text{I} is a nonmetal (Nnm=1N_{nm} = 1). Thus, R=22=1R = \frac{2}{2} = 1.

Loading workspace…