Resources

In optical spectroscopy, spectral lines are often documented in terms of wavenumber ν~\tilde{\nu} expressed in reciprocal centimeters (cm−1\text{cm}^{-1}), where ν~=1λ\tilde{\nu} = \frac{1}{\lambda}. A high-resolution spectrometer detects an atomic emission line from a discharge tube at a wavenumber of ν~=15233 cm−1\tilde{\nu} = 15233\text{ cm}^{-1}. (a) Convert this wavenumber to photon wavelength λ\lambda in both meters and nanometers. (b) Convert the energy per photon corresponding to this wavenumber into molar energy in kilojoules per mole (kJ/mol\text{kJ/mol}), using Avogadro's constant NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1} and hc=1.986×10−25 J⋅mh c = 1.986 \times 10^{-25}\text{ J}\cdot\text{m}.

Answer and steps

Final answer

(a) λ=6.565×10−7 m=656.5 nm\lambda = 6.565 \times 10^{-7}\text{ m} = 656.5\text{ nm}; (b) Emolar=182.2 kJ/molE_{\text{molar}} = 182.2\text{ kJ/mol}.

Steps

Part (a): Calculating Wavelength from Wavenumber

Wavenumber ν~\tilde{\nu} is defined as the reciprocal of wavelength: ν~=1λ  ⟹  λ=1ν~\tilde{\nu} = \frac{1}{\lambda} \implies \lambda = \frac{1}{\tilde{\nu}}

  1. Calculate λ\lambda in centimeters: λ=115233 cm−1≈6.5647×10−5 cm\lambda = \frac{1}{15233\text{ cm}^{-1}} \approx 6.5647 \times 10^{-5}\text{ cm}
  2. Convert to meters (m\text{m}): Since 1 m=100 cm1\text{ m} = 100\text{ cm} (or 1 cm=10−2 m1\text{ cm} = 10^{-2}\text{ m}): λ=6.5647×10−5 cm×10−2 m1 cm=6.565×10−7 m\lambda = 6.5647 \times 10^{-5}\text{ cm} \times \frac{10^{-2}\text{ m}}{1\text{ cm}} = 6.565 \times 10^{-7}\text{ m}
  3. Convert to nanometers (nm\text{nm}): Since 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}: λ=6.565×10−7 m×109 nm1 m=656.5 nm\lambda = 6.565 \times 10^{-7}\text{ m} \times \frac{10^9\text{ nm}}{1\text{ m}} = 656.5\text{ nm}

(Note: A common pitfall is forgetting to convert reciprocal centimeters cm−1\text{cm}^{-1} to reciprocal meters m−1\text{m}^{-1} when using SI constants. Remember that 1 cm−1=100 m−11\text{ cm}^{-1} = 100\text{ m}^{-1}, not 0.01 m−10.01\text{ m}^{-1}.)


Part (b): Calculating Molar Energy

  1. Calculate the energy per single photon (EphotonE_{\text{photon}}): Using the Planck-Einstein relation with hc=1.986×10−25 J⋅mhc = 1.986 \times 10^{-25}\text{ J}\cdot\text{m}: Ephoton=hcλ=1.986×10−25 J⋅m6.5647×10−7 m≈3.0253×10−19 JE_{\text{photon}} = \frac{hc}{\lambda} = \frac{1.986 \times 10^{-25}\text{ J}\cdot\text{m}}{6.5647 \times 10^{-7}\text{ m}} \approx 3.0253 \times 10^{-19}\text{ J}
  2. Convert photon energy to molar energy (EmolarE_{\text{molar}}): Multiply the energy of a single photon by Avogadro's constant (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}): Emolar=Ephoton⋅NAE_{\text{molar}} = E_{\text{photon}} \cdot N_A Emolar=(3.0253×10−19 J)⋅(6.022×1023 mol−1)=1.8218×105 J/molE_{\text{molar}} = (3.0253 \times 10^{-19}\text{ J}) \cdot (6.022 \times 10^{23}\text{ mol}^{-1}) = 1.8218 \times 10^5\text{ J/mol}
  3. Convert Joules to kilojoules (kJ\text{kJ}): Emolar=1.8218×105 J/mol1000 J/kJ=182.2 kJ/molE_{\text{molar}} = \frac{1.8218 \times 10^5\text{ J/mol}}{1000\text{ J/kJ}} = 182.2\text{ kJ/mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert reciprocal centimeters to reciprocal meters (or centimeters to meters) when calculating energy with hc in J·m, leading to an answer that is off by a factor of 100.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=115233 cm−1=6.5647×10−5 cm  ⟹  λ=6.5647×10−7 m  ⟹  λ=656.47 nm\lambda = \frac{1}{15233\text{ cm}^{-1}} = 6.5647 \times 10^{-5}\text{ cm} \implies \lambda = 6.5647 \times 10^{-7}\text{ m} \implies \lambda = 656.47\text{ nm}

  2. Step 2

    Ephoton=hc×ν~=1.986×10−25 J⋅m×15233=3.0253×10−21 JE_{\text{photon}} = hc \times \tilde{\nu} = 1.986 \times 10^{-25}\text{ J}\cdot\text{m} \times 15233 = 3.0253 \times 10^{-21}\text{ J}

    Correct

    Ephoton=hcν~=(1.986×10−25 J⋅m)×(1523300 m−1)=3.0253×10−19 JE_{\text{photon}} = hc \tilde{\nu} = (1.986 \times 10^{-25}\text{ J}\cdot\text{m}) \times (1523300\text{ m}^{-1}) = 3.0253 \times 10^{-19}\text{ J}

    You substituted the wavenumber in cm−1\text{cm}^{-1} directly alongside hchc in J⋅m\text{J}\cdot\text{m}. Because 1 cm−1=100 m−11\text{ cm}^{-1} = 100\text{ m}^{-1}, you need to convert ν~\tilde{\nu} to m−1\text{m}^{-1} (or compute hcλ\frac{hc}{\lambda} using your wavelength in meters) so the length units cancel.

  3. Step 3

    Emolar=Ephoton×NA=3.0253×10−21 J×6.022×1023 mol−1  ⟹  Emolar=1821.8 J/mol=1.822 kJ/molE_{\text{molar}} = E_{\text{photon}} \times N_A = 3.0253 \times 10^{-21}\text{ J} \times 6.022 \times 10^{23}\text{ mol}^{-1} \implies E_{\text{molar}} = 1821.8\text{ J/mol} = 1.822\text{ kJ/mol}

    Correct

    Emolar=(3.0253×10−19 J)×(6.022×1023 mol−1)=1.822×105 J/mol=182.2 kJ/molE_{\text{molar}} = (3.0253 \times 10^{-19}\text{ J}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) = 1.822 \times 10^5\text{ J/mol} = 182.2\text{ kJ/mol}

    Your conversion from photon energy to molar energy in kilojoules per mole was mathematically sound, but the numerical answer inherits the factor-of-100100 error from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the reciprocal relationship between wavenumber and wavelength.

You performed the unit conversions from centimeters to meters and nanometers without error.

You correctly set up the formula to scale single-photon energy to molar energy using Avogadro's number.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion mismatch with reciprocal units

You dropped the unit cm−1\text{cm}^{-1} during multiplication with hchc in J⋅m\text{J}\cdot\text{m}, forgetting that meters and centimeters must cancel.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating cm−1\text{cm}^{-1} as a dimensionless number or overlooking that converting a reciprocal unit requires the opposite power of ten (1 cm−1=100 m−11\text{ cm}^{-1} = 100\text{ m}^{-1}, not 0.01 m−10.01\text{ m}^{-1}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reciprocal Unit Conversion Check
  • 1 cm−1=11 cm=110−2 m=102 m−1=100 m−11\text{ cm}^{-1} = \frac{1}{1\text{ cm}} = \frac{1}{10^{-2}\text{ m}} = 10^2\text{ m}^{-1} = 100\text{ m}^{-1}

  • Always convert cm−1\text{cm}^{-1} to m−1\text{m}^{-1} by multiplying by 100100 before combining with SI constants given in meters.

Dimensional Analysis Check
  • [J⋅m]×[m−1]=J[\text{J}\cdot\text{m}] \times [\text{m}^{-1}] = \text{J}

  • Write out the units next to every quantity in your calculation to verify that the length units cancel completely to leave Joules.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the wavenumber to reciprocal meters: ν~=15233 cm−1×100m−1cm−1=1.5233×106 m−1\tilde{\nu} = 15233\text{ cm}^{-1} \times 100\frac{\text{m}^{-1}}{\text{cm}^{-1}} = 1.5233 \times 10^6\text{ m}^{-1} (or use λ=6.5647×10−7 m\lambda = 6.5647 \times 10^{-7}\text{ m}).

  2. Calculate single-photon energy: Ephoton=hcν~=(1.986×10−25 J⋅m)(1.5233×106 m−1)=3.0253×10−19 JE_{\text{photon}} = hc\tilde{\nu} = (1.986 \times 10^{-25}\text{ J}\cdot\text{m})(1.5233 \times 10^6\text{ m}^{-1}) = 3.0253 \times 10^{-19}\text{ J}.

  3. Multiply by Avogadro's constant: Emolar=(3.0253×10−19 J)(6.022×1023 mol−1)=1.8218×105 J/molE_{\text{molar}} = (3.0253 \times 10^{-19}\text{ J})(6.022 \times 10^{23}\text{ mol}^{-1}) = 1.8218 \times 10^5\text{ J/mol}.

  4. Convert Joules to kilojoules: Emolar=1.8218×105 J/mol1000 J/kJ=182.2 kJ/molE_{\text{molar}} = \frac{1.8218 \times 10^5\text{ J/mol}}{1000\text{ J/kJ}} = 182.2\text{ kJ/mol}.

Final answer

(a) λ=6.565×10−7 m=656.5 nm\lambda = 6.565 \times 10^{-7}\text{ m} = 656.5\text{ nm}; (b) Emolar=182.2 kJ/molE_{\text{molar}} = 182.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between direct units (like cm\text{cm}) and reciprocal units (like cm−1\text{cm}^{-1}).

  • Practice tracking full unit expressions explicitly in Planck-Einstein calculations.

  • Work through the flashcards and practice problems below to master reciprocal unit conversions.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the metric prefix for nanometers as 10⁻⁶ m instead of 10⁻⁹ m, resulting in an incorrect wavelength in nanometers.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=115233 cm−1=6.5647×10−5 cm=6.5647×10−7 m\lambda = \frac{1}{15233\text{ cm}^{-1}} = 6.5647 \times 10^{-5}\text{ cm} = 6.5647 \times 10^{-7}\text{ m}

  2. Step 2

    λ=6.5647×10−7 m×(106 nm1 m)=0.6565 nm\lambda = 6.5647 \times 10^{-7}\text{ m} \times \left(\frac{10^6\text{ nm}}{1\text{ m}}\right) = 0.6565\text{ nm}

    Correct

    λ=6.5647×10−7 m×(109 nm1 m)=656.5 nm\lambda = 6.5647 \times 10^{-7}\text{ m} \times \left(\frac{10^9\text{ nm}}{1\text{ m}}\right) = 656.5\text{ nm}

    The metric prefix nano- represents 10−910^{-9}, meaning 1 m=109 nm1\text{ m} = 10^9\text{ nm} (or 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}). Using 10610^6 corresponds to micrometers (μm\mu\text{m}).

  3. Step 3

    Ephoton=hcλ=1.986×10−25 J⋅m6.5647×10−7 m=3.0253×10−19 JE_{\text{photon}} = \frac{hc}{\lambda} = \frac{1.986 \times 10^{-25}\text{ J}\cdot\text{m}}{6.5647 \times 10^{-7}\text{ m}} = 3.0253 \times 10^{-19}\text{ J}

  4. Step 4

    Emolar=3.0253×10−19 J×6.022×1023 mol−1=1.8219×105 J/mol  ⟹  Emolar=182.19 kJ/molE_{\text{molar}} = 3.0253 \times 10^{-19}\text{ J} \times 6.022 \times 10^{23}\text{ mol}^{-1} = 1.8219 \times 10^5\text{ J/mol} \implies E_{\text{molar}} = 182.19\text{ kJ/mol}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related wavenumber to wavelength using λ=1ν~\lambda = \frac{1}{\tilde{\nu}}.

You successfully converted centimeters to meters using 1 cm=10−2 m1\text{ cm} = 10^{-2}\text{ m}.

You correctly calculated single-photon energy using E=hcλE = \frac{hc}{\lambda} with consistent SI units.

You accurately converted single-photon energy to molar energy in kJ/mol\text{kJ/mol} using Avogadro's constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion (nano vs. micro)

You wrote 106 nm=1 m10^6\text{ nm} = 1\text{ m} instead of 109 nm=1 m10^9\text{ nm} = 1\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the metric prefix nano- (10−910^{-9}, memory hook: 'nano = nine') with micro- (10−610^{-6}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Definition
  • 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}, so 1 m=109 nm1\text{ m} = 10^9\text{ nm}. Meanwhile, 1 \mum=10−6 m1\text{ \mu m} = 10^{-6}\text{ m}.

  • Associate 'nano' with 'nine' (10−910^{-9} or 109 nm/m10^9\text{ nm/m}) to avoid mixing it up with micro- (10−610^{-6}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. λ=6.5647×10−7 m×(109 nm1 m)=656.47 nm≈656.5 nm\lambda = 6.5647 \times 10^{-7}\text{ m} \times \left(\frac{10^9\text{ nm}}{1\text{ m}}\right) = 656.47\text{ nm} \approx 656.5\text{ nm}

Final answer

(a) λ=6.565×10−7 m=656.5 nm\lambda = 6.565 \times 10^{-7}\text{ m} = 656.5\text{ nm}; (b) Emolar=182.2 kJ/molE_{\text{molar}} = 182.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review common SI prefixes in spectroscopy: nano- (10−910^{-9}) for visible/UV light and micro- (10−610^{-6}) for infrared radiation.

  • Perform a quick sanity check: visible spectral lines typically fall between 400 nm400\text{ nm} and 750 nm750\text{ nm}, so 0.6565 nm0.6565\text{ nm} is an order-of-magnitude clue of an incorrect unit conversion.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the energy per photon correctly but omits multiplying by Avogadro's number, reporting single-photon energy converted to kJ instead of molar energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=115233 cm−1=6.5647×10−5 cm  ⟹  λ=6.5647×10−7 m=656.47 nm\lambda = \frac{1}{15233}\text{ cm}^{-1} = 6.5647 \times 10^{-5}\text{ cm} \implies \lambda = 6.5647 \times 10^{-7}\text{ m} = 656.47\text{ nm}

  2. Step 2

    E=hcλ=1.986×10−25 J⋅m6.5647×10−7 m=3.0253×10−19 JE = \frac{hc}{\lambda} = \frac{1.986 \times 10^{-25}\text{ J}\cdot\text{m}}{6.5647 \times 10^{-7}\text{ m}} = 3.0253 \times 10^{-19}\text{ J}

  3. Step 3

    E=3.0253×10−22 kJ/molE = 3.0253 \times 10^{-22}\text{ kJ/mol}

    Correct

    Emolar=Ephoton×NA=(3.0253×10−19 J)×(6.022×1023 mol−1)×1 kJ1000 J=182.2 kJ/molE_{\text{molar}} = E_{\text{photon}} \times N_A = (3.0253 \times 10^{-19}\text{ J}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) \times \frac{1\text{ kJ}}{1000\text{ J}} = 182.2\text{ kJ/mol}

    You divided the single-photon energy by 10001000 to convert J\text{J} to kJ\text{kJ}, but you did not multiply by Avogadro's number (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}) to account for a full mole of photons.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related wavenumber to wavelength using the reciprocal relationship.

You performed the unit conversions from centimeters to meters and nanometers accurately.

You applied the Planck-Einstein formula to find the energy of a single photon.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Avogadro's constant in molar quantity conversion

You divided by 10001000 to convert joules to kilojoules, but forgot to scale from an individual photon to a mole of photons using Avogadro's constant.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing single-particle energy (EphotonE_{\text{photon}} in J\text{J}) with molar energy (EmolarE_{\text{molar}} in kJ/mol\text{kJ/mol}). The unit label /mol\text{/mol} was appended after metric prefix conversion without carrying out the physical conversion between particles and moles.

REASONING PATH
Your ACEpath teacher’s suggested approach
Scale from Photon to Mole
  • Emolar=Ephoton×NAE_{\text{molar}} = E_{\text{photon}} \times N_A

  • Whenever an answer requires molar energy (J/mol\text{J/mol} or kJ/mol\text{kJ/mol}), multiply the single-photon energy by 6.022×1023 mol−16.022 \times 10^{23}\text{ mol}^{-1} before converting to kJ\text{kJ}.

Check Magnitude for Chemical Molar Energies
  • Optical transitions in atoms typically correspond to hundreds of kilojoules per mole (10210^2 to 103 kJ/mol10^3\text{ kJ/mol}).

  • A value on the order of 10−22 kJ/mol10^{-22}\text{ kJ/mol} indicates single-particle energy that has not yet been scaled by Avogadro's number.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the single-photon energy by Avogadro's constant: Emolar, J=(3.0253×10−19 J)×(6.022×1023 mol−1)=1.8218×105 J/molE_{\text{molar, J}} = (3.0253 \times 10^{-19}\text{ J}) \times (6.022 \times 10^{23}\text{ mol}^{-1}) = 1.8218 \times 10^5\text{ J/mol}.

  2. Convert from joules per mole to kilojoules per mole: Emolar=1.8218×105 J/mol1000 J/kJ=182.2 kJ/molE_{\text{molar}} = \frac{1.8218 \times 10^5\text{ J/mol}}{1000\text{ J/kJ}} = 182.2\text{ kJ/mol}.

Final answer

Emolar=182.2 kJ/molE_{\text{molar}} = 182.2\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between single-photon units (J/photon\text{J/photon}) and macroscopic molar units (kJ/mol\text{kJ/mol}).

  • Practice converting spectroscopic quantities across microscopic and macroscopic scales using dimensional analysis.

Lock it in

Similar question

01

A fundamental vibration in an infrared spectrum occurs at ν~=3000 cm−1\tilde{\nu} = 3000\text{ cm}^{-1}. Calculate the energy of a single photon of this radiation in Joules using hc=1.986×10−25 J⋅mhc = 1.986 \times 10^{-25}\text{ J}\cdot\text{m}.

Answer

E=5.958×10−20 JE = 5.958 \times 10^{-20}\text{ J}. First convert ν~=3000 cm−1×100=3.00×105 m−1\tilde{\nu} = 3000\text{ cm}^{-1} \times 100 = 3.00 \times 10^5\text{ m}^{-1}. Then E=hcν~=(1.986×10−25 J⋅m)(3.00×105 m−1)=5.958×10−20 JE = hc\tilde{\nu} = (1.986 \times 10^{-25}\text{ J}\cdot\text{m})(3.00 \times 10^5\text{ m}^{-1}) = 5.958 \times 10^{-20}\text{ J}.

02

An ultraviolet emission line has a wavenumber of ν~=40000 cm−1\tilde{\nu} = 40000\text{ cm}^{-1}. Determine both its wavelength λ\lambda in nanometers (extnm ext{nm}) and its molar photon energy in kilojoules per mole (kJ/mol\text{kJ/mol}). (Use hc=1.986×10−25 J⋅mhc = 1.986 \times 10^{-25}\text{ J}\cdot\text{m} and NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1})

Answer

λ=250 nm\lambda = 250\text{ nm}; Emolar=478.4 kJ/molE_{\text{molar}} = 478.4\text{ kJ/mol}. Steps: λ=140000 cm−1=2.50×10−5 cm=2.50×10−7 m=250 nm\lambda = \frac{1}{40000\text{ cm}^{-1}} = 2.50 \times 10^{-5}\text{ cm} = 2.50 \times 10^{-7}\text{ m} = 250\text{ nm}. Ephoton=1.986×10−25 J⋅m2.50×10−7 m=7.944×10−19 JE_{\text{photon}} = \frac{1.986 \times 10^{-25}\text{ J}\cdot\text{m}}{2.50 \times 10^{-7}\text{ m}} = 7.944 \times 10^{-19}\text{ J}. Emolar=(7.944×10−19 J)(6.022×1023 mol−1)(10−3 kJ/J)=478.4 kJ/molE_{\text{molar}} = (7.944 \times 10^{-19}\text{ J})(6.022 \times 10^{23}\text{ mol}^{-1})(10^{-3}\text{ kJ/J}) = 478.4\text{ kJ/mol}.

03

The ionization energy of an atom is 1312 kJ/mol1312\text{ kJ/mol}. Find the minimum wavenumber ν~\tilde{\nu} (in cm−1\text{cm}^{-1}) of a photon capable of ionizing this atom. (Use hc=1.986×10−25 J⋅mhc = 1.986 \times 10^{-25}\text{ J}\cdot\text{m} and NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1})

Answer

ν~≈109700 cm−1\tilde{\nu} \approx 109700\text{ cm}^{-1} (or 1.097×105 cm−11.097 \times 10^5\text{ cm}^{-1}). Steps: Single-photon energy E=1.312×106 J/mol6.022×1023 mol−1=2.1787×10−18 JE = \frac{1.312 \times 10^6\text{ J/mol}}{6.022 \times 10^{23}\text{ mol}^{-1}} = 2.1787 \times 10^{-18}\text{ J}. In reciprocal meters, ν~SI=Ehc=2.1787×10−18 J1.986×10−25 J⋅m=1.0970×107 m−1\tilde{\nu}_{\text{SI}} = \frac{E}{hc} = \frac{2.1787 \times 10^{-18}\text{ J}}{1.986 \times 10^{-25}\text{ J}\cdot\text{m}} = 1.0970 \times 10^7\text{ m}^{-1}. Convert to cm−1\text{cm}^{-1} by dividing by 100100: ν~=1.097×105 cm−1\tilde{\nu} = 1.097 \times 10^5\text{ cm}^{-1}.

Loading workspace…