Resources

A wastewater sample contains dissolved peroxydisulfate ions, S2O82−\text{S}_2\text{O}_8^{2-}, at a trace concentration of 576 ppm576\text{ ppm} by mass (where 1 ppm=1 mg⋅L−11\text{ ppm} = 1\text{ mg}\cdot\text{L}^{-1}, assuming a solution density of 1.00 g⋅mL−11.00\text{ g}\cdot\text{mL}^{-1}; molar mass of S2O82−\text{S}_2\text{O}_8^{2-} is 192.14 g⋅mol−1192.14\text{ g}\cdot\text{mol}^{-1}). The oxidation of iodide proceeds as S2O82−(aq)+3I−(aq)→2SO42−(aq)+I3−(aq)\text{S}_2\text{O}_8^{2-}(aq) + 3\text{I}^-(aq) \rightarrow 2\text{SO}_4^{2-}(aq) + \text{I}_3^-(aq) with the rate law Rate=k[S2O82−][I−]\text{Rate} = k[\text{S}_2\text{O}_8^{2-}][\text{I}^-]. If iodide ion is present at [I−]=25.0 mmol⋅L−1[\text{I}^-] = 25.0\text{ mmol}\cdot\text{L}^{-1} and the second-order rate constant is k=0.0800 M−1s−1k = 0.0800\text{ M}^{-1}\text{s}^{-1}, convert all concentration quantities to molarity (mol⋅L−1\text{mol}\cdot\text{L}^{-1}) and calculate the initial reaction rate in M⋅s−1\text{M}\cdot\text{s}^{-1}.

Answer and steps

Final answer

Rate0=6.00×10−6 M⋅s−1\text{Rate}_0 = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

Steps

01

Convert the concentration of peroxydisulfate ion (SX2OX8X2−\ce{S2O8^{2-}}) to molarity

The concentration is given as 576 ppm576\text{ ppm}. Since 1 ppm=1 mg⋅L−11\text{ ppm} = 1\text{ mg}\cdot\text{L}^{-1}:

[SX2OX8X2−]=576 mg⋅L−1=0.576 g⋅L−1[\ce{S2O8^{2-}}] = 576\text{ mg}\cdot\text{L}^{-1} = 0.576\text{ g}\cdot\text{L}^{-1}

Using the molar mass of SX2OX8X2−\ce{S2O8^{2-}} (M=192.14 g⋅mol−1M = 192.14\text{ g}\cdot\text{mol}^{-1}), convert mass concentration to molarity:

[SX2OX8X2−]=0.576 g⋅L−1192.14 g⋅mol−1≈3.00×10−3 mol⋅L−1=3.00×10−3 M[\ce{S2O8^{2-}}] = \frac{0.576\text{ g}\cdot\text{L}^{-1}}{192.14\text{ g}\cdot\text{mol}^{-1}} \approx 3.00 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1} = 3.00 \times 10^{-3}\text{ M}


02

Convert the concentration of iodide ion (IX−\ce{I-}) to molarity

The iodide concentration is given in millimoles per liter:

[IX−]=25.0 mmol⋅L−1=25.0×10−3 mol⋅L−1=0.0250 M[\ce{I-}] = 25.0\text{ mmol}\cdot\text{L}^{-1} = 25.0 \times 10^{-3}\text{ mol}\cdot\text{L}^{-1} = 0.0250\text{ M}


03

Calculate the initial reaction rate

The given rate law is:

Rate0=k[SX2OX8X2−][IX−]\text{Rate}_0 = k[\ce{S2O8^{2-}}][\ce{I-}]

Pitfall Note: Be careful not to use stoichiometric coefficients from the balanced equation (SX2OX8X2−+3IX−→…\ce{S2O8^{2-}} + 3\ce{I-} \rightarrow \dots) as exponents; the reaction order is determined experimentally and is defined by the provided rate law.

Substitute the rate constant and molar concentrations into the rate law:

Rate0=(0.0800 M−1⋅s−1)⋅(3.00×10−3 M)⋅(2.50×10−2 M)\text{Rate}_0 = (0.0800\text{ M}^{-1}\cdot\text{s}^{-1}) \cdot (3.00 \times 10^{-3}\text{ M}) \cdot (2.50 \times 10^{-2}\text{ M})

Rate0=6.00×10−6 M⋅s−1\text{Rate}_0 = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the rate law by using stoichiometric coefficients from the balanced equation as reaction orders instead of the provided rate law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    576 ppm=0.576 g/L  ⟹  [S2O82−]=0.576192.14=0.00300 M576\text{ ppm} = 0.576\text{ g/L} \implies [\text{S}_2\text{O}_8^{2-}] = \frac{0.576}{192.14} = 0.00300\text{ M}

  2. Step 2

    [I−]=25.0 mmol/L=0.0250 M[\text{I}^-] = 25.0\text{ mmol/L} = 0.0250\text{ M}

  3. Step 3

    Rate=k[S2O82−][I−]3  ⟹  Rate=(0.0800)(0.00300)(0.0250)3\text{Rate} = k[\text{S}_2\text{O}_8^{2-}][\text{I}^-]^3 \implies \text{Rate} = (0.0800)(0.00300)(0.0250)^3

    Correct

    Rate=k[S2O82−][I−]  ⟹  Rate=(0.0800 M−1⋅s−1)(0.00300 M)(0.0250 M)\text{Rate} = k[\text{S}_2\text{O}_8^{2-}][\text{I}^-] \implies \text{Rate} = (0.0800\text{ M}^{-1}\cdot\text{s}^{-1})(0.00300\text{ M})(0.0250\text{ M})

    You raised [I−][\text{I}^-] to the third power based on the stoichiometric coefficient 33 in the balanced equation. Reaction orders must be determined experimentally; the problem statement explicitly defined the rate law as first-order in iodide, Rate=k[S2O82−][I−]\text{Rate} = k[\text{S}_2\text{O}_8^{2-}][\text{I}^-].

  4. Step 4

    Rate=3.75×10−9 M⋅s−1\text{Rate} = 3.75 \times 10^{-9}\text{ M}\cdot\text{s}^{-1}

    Correct

    Rate=6.00×10−6 M⋅s−1\text{Rate} = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

    Your final arithmetic followed correctly from your formula in step 3, but the numerical result is incorrect due to the incorrect exponent.

WHAT YOU DID WELL
Compliments from Your Teacher

You successfully converted the mass concentration in ppm to molarity using the molar mass.

You correctly converted the iodide concentration from mmol/L to M.

You correctly identified the given rate constant kk and substituted your concentrations into your rate expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating stoichiometric coefficients with reaction orders

You used the stoichiometric coefficient of 3 from the balanced equation as the reaction order for iodide instead of using the provided rate law.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing thermodynamic equilibrium expressions (where coefficients become exponents) or elementary rate laws with overall chemical reaction rate laws, which are governed solely by experimental data or explicitly provided rate laws.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the given rate law before writing exponents
  • For an overall reaction, the reaction order with respect to each reactant cannot be deduced from stoichiometric coefficients; it must be taken directly from the given rate law or experimental data.

  • Always copy the exact algebraic rate law given in the problem text rather than creating one from the balanced stoichiometric equation.

Verify dimensional consistency of rate constant units
  • The units of kk reflect the overall reaction order: for an overall order of nn, kk has units M1−n⋅s−1\text{M}^{1-n}\cdot\text{s}^{-1}.

  • Check that your rate law matches the units of k=0.0800 M−1s−1k = 0.0800\text{ M}^{-1}\text{s}^{-1}, which signifies an overall second-order reaction (1+1=21+1=2), not fourth-order (1+3=41+3=4).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the rate law as explicitly provided: Rate=k[S2O82−][I−]\text{Rate} = k[\text{S}_2\text{O}_8^{2-}][\text{I}^-].

  2. Substitute the known values: Rate=(0.0800 M−1⋅s−1)×(0.00300 M)×(0.0250 M)\text{Rate} = (0.0800\text{ M}^{-1}\cdot\text{s}^{-1}) \times (0.00300\text{ M}) \times (0.0250\text{ M}).

  3. Multiply the factors: Rate=6.00×10−6 M⋅s−1\text{Rate} = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}.

Final answer

6.00×10−6 M⋅s−16.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check whether a rate law is already provided in the prompt before writing exponents.

  • Use the units of the rate constant kk as a sanity check for the overall reaction order.

  • Practice distinguishing between rate law expressions and equilibrium constant (KeqK_{\text{eq}}) expressions.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert milligrams to grams when calculating the molarity of peroxydisulfate from ppm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    576 ppm=576 g/L  ⟹  [S2O82−]=576/192.14=3.00 M576\text{ ppm} = 576\text{ g/L} \implies [\text{S}_2\text{O}_8^{2-}] = 576 / 192.14 = 3.00\text{ M}

    Correct

    [S2O82−]=576 mg⋅L−1×10−3 g⋅mg−1192.14 g⋅mol−1=3.00×10−3 M[\text{S}_2\text{O}_8^{2-}] = \frac{576\text{ mg}\cdot\text{L}^{-1} \times 10^{-3}\text{ g}\cdot\text{mg}^{-1}}{192.14\text{ g}\cdot\text{mol}^{-1}} = 3.00 \times 10^{-3}\text{ M}

    In dilute aqueous solution, 1 ppm1\text{ ppm} equals 1 mg⋅L−11\text{ mg}\cdot\text{L}^{-1} (10−3 g⋅L−110^{-3}\text{ g}\cdot\text{L}^{-1}), not 1 g⋅L−11\text{ g}\cdot\text{L}^{-1}.

  2. Step 2

    [I−]=25.0 mmol/L=0.0250 M[\text{I}^-] = 25.0\text{ mmol/L} = 0.0250\text{ M}

  3. Step 3

    Rate=k[S2O82−][I−]  ⟹  Rate=(0.0800)(3.00)(0.0250)\text{Rate} = k[\text{S}_2\text{O}_8^{2-}][\text{I}^-] \implies \text{Rate} = (0.0800)(3.00)(0.0250)

    Correct

    Rate0=(0.0800 M−1⋅s−1)(3.00×10−3 M)(0.0250 M)\text{Rate}_0 = (0.0800\text{ M}^{-1}\cdot\text{s}^{-1})(3.00 \times 10^{-3}\text{ M})(0.0250\text{ M})

    Your rate law expression and substitution method are correct, but the value substituted for [S2O82−][\text{S}_2\text{O}_8^{2-}] carries forward the 10310^3 conversion error from Step 1.

  4. Step 4

    Rate=6.00×10−3 M⋅s−1\text{Rate} = 6.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

    Correct

    Rate0=6.00×10−6 M⋅s−1\text{Rate}_0 = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

    Your arithmetic follows correctly from your substituted values, but the final rate is off by a factor of 10310^3 due to the earlier concentration error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted millimolar concentration to molarity for iodide.

You correctly identified and applied the given experimental rate law without confusing stoichiometric coefficients with reaction orders.

You performed the arithmetic evaluation accurately based on your substituted numbers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
unit_conversion_ppm_to_molarity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflated the definition of parts per million (ppm) in aqueous solution (1 ppm=1 mg⋅L−11\text{ ppm} = 1\text{ mg}\cdot\text{L}^{-1}) with grams per liter (1 g⋅L−11\text{ g}\cdot\text{L}^{-1}), omitting the factor of 10−310^{-3} needed to convert milligrams to grams before dividing by molar mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
ppm in Aqueous Solutions
  • For dilute aqueous solutions with density ≈1.00 g⋅mL−1\approx 1.00\text{ g}\cdot\text{mL}^{-1}, 1 ppm=1 mg⋅L−1=10−3 g⋅L−11\text{ ppm} = 1\text{ mg}\cdot\text{L}^{-1} = 10^{-3}\text{ g}\cdot\text{L}^{-1}.

  • Always write out the units explicitly: ppm→mg⋅L−1→10−3 g⋅L−1\text{ppm} \rightarrow \text{mg}\cdot\text{L}^{-1} \rightarrow 10^{-3}\text{ g}\cdot\text{L}^{-1} before applying molar mass (MM in g⋅mol−1\text{g}\cdot\text{mol}^{-1}) to find molarity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert 576 ppm576\text{ ppm} to mass concentration in grams per liter: 576 ppm=576 mg⋅L−1=0.576 g⋅L−1576\text{ ppm} = 576\text{ mg}\cdot\text{L}^{-1} = 0.576\text{ g}\cdot\text{L}^{-1}.

  2. Divide by molar mass (192.14 g⋅mol−1192.14\text{ g}\cdot\text{mol}^{-1}): [S2O82−]=0.576 g⋅L−1192.14 g⋅mol−1=3.00×10−3 M[\text{S}_2\text{O}_8^{2-}] = \frac{0.576\text{ g}\cdot\text{L}^{-1}}{192.14\text{ g}\cdot\text{mol}^{-1}} = 3.00 \times 10^{-3}\text{ M}.

  3. Substitute the correct concentrations into the rate law: Rate0=(0.0800 M−1⋅s−1)(3.00×10−3 M)(0.0250 M)\text{Rate}_0 = (0.0800\text{ M}^{-1}\cdot\text{s}^{-1})(3.00 \times 10^{-3}\text{ M})(0.0250\text{ M}).

Final answer

Rate0=6.00×10−6 M⋅s−1\text{Rate}_0 = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review trace concentration units like ppm\text{ppm} and ppb\text{ppb} to ensure you associate them with milligrams and micrograms per liter, respectively.

  • Practice dimensional analysis by writing full unit labels at every intermediate step until units cancel to mol⋅L−1\text{mol}\cdot\text{L}^{-1}.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert iodide concentration from millimolar to molar, substituting 25.0 directly into the rate law.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    576 ppm=0.576 g/L  ⟹  [S2O82−]=0.576192.14=0.00300 M576\text{ ppm} = 0.576\text{ g/L} \implies [\text{S}_2\text{O}_8^{2-}] = \frac{0.576}{192.14} = 0.00300\text{ M}

  2. Step 2

    [I−]=25.0 M[\text{I}^-] = 25.0\text{ M}

    Correct

    [I−]=25.0 mmol⋅L−1=25.0×10−3 M=0.0250 M[\text{I}^-] = 25.0\text{ mmol}\cdot\text{L}^{-1} = 25.0 \times 10^{-3}\text{ M} = 0.0250\text{ M}

    The problem gave the iodide concentration in millimoles per liter (mmol⋅L−1\text{mmol}\cdot\text{L}^{-1}), not molarity (mol⋅L−1\text{mol}\cdot\text{L}^{-1}). You need to divide by 10001000 (or multiply by 10−310^{-3}) to convert millimolar to molar.

  3. Step 3

    Rate=k[S2O82−][I−]  ⟹  Rate=(0.0800)(0.00300)(25.0)  ⟹  Rate=6.00×10−3 M⋅s−1\text{Rate} = k[\text{S}_2\text{O}_8^{2-}][\text{I}^-] \implies \text{Rate} = (0.0800)(0.00300)(25.0) \implies \text{Rate} = 6.00 \times 10^{-3}\text{ M}\cdot\text{s}^{-1}

    Correct

    Rate0=(0.0800 M−1⋅s−1)(3.00×10−3 M)(0.0250 M)=6.00×10−6 M⋅s−1\text{Rate}_0 = (0.0800\text{ M}^{-1}\cdot\text{s}^{-1})(3.00 \times 10^{-3}\text{ M})(0.0250\text{ M}) = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

    Your substitution and calculation followed the correct rate expression, but using the unconverted iodide concentration propagated an error factor of 10310^3 into your final answer.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted parts-per-million (ppm\text{ppm}) as milligrams per liter and converted to g⋅L−1\text{g}\cdot\text{L}^{-1}.

You accurately calculated the molarity of peroxydisulfate ion using its molar mass.

You correctly used the given rate law rather than using the stoichiometric coefficients from the balanced equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You dropped the milli- prefix in mmol⋅L−1\text{mmol}\cdot\text{L}^{-1}, substituting 25.0 M25.0\text{ M} directly into the rate law.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric prefixes during unit harmonization before substituting values into a rate law.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Check
  • 1 mmol=10−3 mol1\text{ mmol} = 10^{-3}\text{ mol}, so 1 mmol⋅L−1=10−3 M1\text{ mmol}\cdot\text{L}^{-1} = 10^{-3}\text{ M}.

  • Always convert millimolar (mM\text{mM} or mmol⋅L−1\text{mmol}\cdot\text{L}^{-1}) to molar (M\text{M} or mol⋅L−1\text{mol}\cdot\text{L}^{-1}) before inserting concentrations into a rate law whose rate constant kk contains M−1\text{M}^{-1}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert [I−][\text{I}^-] to molarity: [I−]=25.0 mmol⋅L−1×10−3 mol1 mmol=0.0250 M[\text{I}^-] = 25.0\text{ mmol}\cdot\text{L}^{-1} \times \frac{10^{-3}\text{ mol}}{1\text{ mmol}} = 0.0250\text{ M}.

  2. Substitute into the rate law: Rate0=(0.0800 M−1⋅s−1)(3.00×10−3 M)(0.0250 M)\text{Rate}_0 = (0.0800\text{ M}^{-1}\cdot\text{s}^{-1})(3.00 \times 10^{-3}\text{ M})(0.0250\text{ M}).

  3. Compute the product: Rate0=6.00×10−6 M⋅s−1\text{Rate}_0 = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}.

Final answer

Rate0=6.00×10−6 M⋅s−1\text{Rate}_0 = 6.00 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check all unit prefixes (e.g., m-\text{m-}, μ-\mu\text{-}, k-\text{k-}) against the units of the rate constant kk before multiplying.

  • Write out unit cancellation explicitly when evaluating rate equations to catch dimensional mismatches early.

Lock it in

Similar question

01

For the reaction 2NO(g)+O2(g)→2NO2(g)2\text{NO}(g) + \text{O}_2(g) \rightarrow 2\text{NO}_2(g), the rate law is given as Rate=k[NO]2[O2]\text{Rate} = k[\text{NO}]^2[\text{O}_2] with k=7.0×103 M−2⋅s−1k = 7.0 \times 10^3\text{ M}^{-2}\cdot\text{s}^{-1}. Calculate the initial rate when [NO]=0.010 M[\text{NO}] = 0.010\text{ M} and [O2]=0.040 M[\text{O}_2] = 0.040\text{ M}.

Answer

Rate=2.8×10−2 M⋅s−1\text{Rate} = 2.8 \times 10^{-2}\text{ M}\cdot\text{s}^{-1}. Key steps: Substitute values directly into the provided rate law: Rate=(7.0×103)(0.010)2(0.040)=(7000)(1.0×10−4)(0.040)=0.028 M⋅s−1\text{Rate} = (7.0 \times 10^3)(0.010)^2(0.040) = (7000)(1.0 \times 10^{-4})(0.040) = 0.028\text{ M}\cdot\text{s}^{-1}.

02

The decomposition reaction 2N2O5(g)→4NO2(g)+O2(g)2\text{N}_2\text{O}_5(g) \rightarrow 4\text{NO}_2(g) + \text{O}_2(g) has a measured rate constant k=5.0×10−4 s−1k = 5.0 \times 10^{-4}\text{ s}^{-1}. A container initially holds 1.08 g1.08\text{ g} of N2O5\text{N}_2\text{O}_5 (M=108.0 g⋅mol−1M = 108.0\text{ g}\cdot\text{mol}^{-1}) in a 2.0 L2.0\text{ L} vessel. Find the initial rate of decomposition.

Answer

Rate=2.5×10−6 M⋅s−1\text{Rate} = 2.5 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}. Key steps: (1) Find concentration: [N2O5]=1.08 g/108.0 g⋅mol−12.0 L=0.0050 M[\text{N}_2\text{O}_5] = \frac{1.08\text{ g} / 108.0\text{ g}\cdot\text{mol}^{-1}}{2.0\text{ L}} = 0.0050\text{ M}. (2) The units of kk (s−1\text{s}^{-1}) indicate a first-order reaction: Rate=k[N2O5]=(5.0×10−4 s−1)(0.0050 M)=2.5×10−6 M⋅s−1\text{Rate} = k[\text{N}_2\text{O}_5] = (5.0 \times 10^{-4}\text{ s}^{-1})(0.0050\text{ M}) = 2.5 \times 10^{-6}\text{ M}\cdot\text{s}^{-1}.

03

A reaction 3A+2B→Products3\text{A} + 2\text{B} \rightarrow \text{Products} has rate constant k=1.20 M−1⋅s−1k = 1.20\text{ M}^{-1}\cdot\text{s}^{-1}. When [A]=0.150 M[\text{A}] = 0.150\text{ M} and [B]=0.200 M[\text{B}] = 0.200\text{ M}, the reaction is known to be zero-order in A\text{A}. Determine the rate law and calculate the initial rate.

Answer

Rate=0.0480 M⋅s−1\text{Rate} = 0.0480\text{ M}\cdot\text{s}^{-1}. Key steps: (1) The unit of kk (M−1⋅s−1\text{M}^{-1}\cdot\text{s}^{-1}) indicates an overall second-order reaction (n=2n = 2). (2) Since the order with respect to A\text{A} is 00, the order with respect to B\text{B} must be 22, giving Rate=k[B]2\text{Rate} = k[\text{B}]^2. (3) Evaluate: Rate=(1.20 M−1⋅s−1)(0.200 M)2=1.20×0.0400=0.0480 M⋅s−1\text{Rate} = (1.20\text{ M}^{-1}\cdot\text{s}^{-1})(0.200\text{ M})^2 = 1.20 \times 0.0400 = 0.0480\text{ M}\cdot\text{s}^{-1}.

Loading workspace…