Resources
A high-pressure diving research chamber has a maximum structural burst threshold of . The chamber is loaded with neon gas at and while its internal volume is held rigid at . Determine the critical maximum temperature, in degrees Celsius (), to which the chamber can be heated before exceeding its pressure safety limit.
Answer and steps
Final answer
Steps
Identify the constant quantities and applicable gas law
The research chamber is rigid, meaning its volume remains constant (), and the amount of neon gas is fixed ( is constant).
Under constant volume and constant molar quantity, the relationship between pressure and absolute temperature is governed by Gay-Lussac's Law:
Convert the initial temperature to kelvins
Gas law equations require absolute temperature in kelvins ():
Pitfall to avoid: Never calculate pressure-temperature ratios using temperatures in degrees Celsius, as Celsius is not an absolute temperature scale.
Solve for the maximum allowable absolute temperature ()
Rearranging Gay-Lussac's Law to solve for :
Substitute the given values into the equation:
- Initial pressure,
- Maximum burst pressure,
Convert the final temperature back to degrees Celsius
Convert the critical temperature from kelvins to degrees Celsius:
Heating the chamber past will cause the internal gas pressure to exceed the safety threshold.
Typical errors
01 The student directly uses temperatures in degrees Celsius without converting to Kelvin, resulting in an incorrect final temperature of 67.0°C.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Gas laws describe relationships on an absolute scale, so you must convert temperatures to kelvins before substituting them into the formula.
- Step 3Correct
Your algebraic rearrangement and calculation were carried out correctly, but the resulting numerical value was skewed by using Celsius rather than kelvins.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that volume is constant and selected Gay-Lussac's Law.
You correctly paired the initial and final pressure values.
You solved the algebraic proportion accurately for the unknown variable.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou substituted temperatures directly into the gas law equation using degrees Celsius instead of converting to the absolute Kelvin scale, forgetting that zero on the Celsius scale does not represent zero kinetic energy or zero pressure.
REASONING PATH
Your ACEpath teacher’s suggested approach- Absolute Temperature Requirement
All ideal gas law equations (, , ) require temperature on an absolute scale (kelvins).
Convert any given temperature by adding before substituting it into any gas law formula.
- Converting Final Answers
If a problem asks for a final temperature in degrees Celsius, calculate the final temperature in kelvins first, then convert back.
Subtract from your final Kelvin temperature: .
CORRECTED PATH
ACEpath Teacher's Demonstration02 The student calculates the final temperature correctly in Kelvin as 982.5 K but forgets to convert back to degrees Celsius as requested by the prompt.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
Final answer:
CorrectYou reported your final answer in Kelvin, but the question explicitly asked for the temperature in degrees Celsius ().
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that volume is held constant and correctly chose Gay-Lussac's Law.
You properly converted the initial temperature to Kelvin before substituting it into the gas law equation.
You executed the algebraic rearrangement and numerical calculation accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou stopped calculating as soon as you obtained in Kelvin, overlooking the requested unit of degrees Celsius.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisGas law calculations mathematically require temperatures on an absolute scale (Kelvin), which can make finding the Kelvin value feel like the complete solution. Whenever an initial or target value is requested in Celsius, always perform the exit conversion ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Target Unit Verification
Gas law formulas require temperature in Kelvin, but the prompt's requested reporting unit dictates the final step.
Circle or underline the specified final unit in the question stem before solving, and check your final answer against it.
CORRECTED PATH
ACEpath Teacher's DemonstrationTake the absolute temperature obtained from Gay-Lussac's Law: .
Convert from Kelvin to degrees Celsius using .
03 The student inverts the pressure ratio when solving Gay-Lussac's law, calculating T2 = T1 * (P1 / P2) to get 87.5 K (-185.7°C).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When rearranging to solve for , cross-multiplication gives , which isolates as . Inverting the pressure fraction caused the calculated temperature to decrease even though pressure increased.
- Step 3Correct
Your subtraction of followed the correct conversion rule, but your final numerical result was affected by the inverted pressure ratio in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that gas law calculations require temperatures on the absolute kelvin scale.
You remembered to convert your final absolute temperature back to degrees Celsius as requested by the problem.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou solved for a denominator variable in a direct proportionality without cross-multiplying first. Because pressure and temperature are directly proportional at constant volume (), increasing the pressure from to requires heating, meaning the ratio multiplier must be .
REASONING PATH
Your ACEpath teacher’s suggested approach- Cross-Multiply Before Isolating
For any proportion , cross-multiply first: .
Write , then divide both sides by to isolate .
- Physical Reality Check (Direct Proportionality)
According to Gay-Lussac's Law, pressure and absolute temperature change in the same direction when volume is constant.
Compare and . Since pressure increases (), verify that is higher than before continuing.
CORRECTED PATH
ACEpath Teacher's DemonstrationRearrange Gay-Lussac's Law properly by cross-multiplying: .
Substitute the known values into the equation: .
Convert the absolute temperature back to degrees Celsius: .
Lock it in
Why must all gas law calculations use the Kelvin scale instead of the Celsius scale?
Direct proportionality between thermal kinetic energy, pressure, and volume only holds relative to absolute zero (), where molecular motion hypothetically ceases.
Similar question
A rigid cylinder contains argon gas at an initial pressure of and an initial temperature of . What is the pressure inside the cylinder if the temperature increases to ?
Answer
. Key steps: , . Using .
An aerosol spray can has an internal pressure of at . The manufacturer warns that the can may explode if its internal pressure exceeds . Calculate the critical temperature in degrees Celsius () at which this burst threshold is reached.
Answer
. Key steps: . . Convert back to Celsius: .
A rigid tank filled with oxygen gas cools from down to . If the final pressure of the gas is , determine the initial pressure in kilopascals () of the hot gas.
Answer
. Key steps: , . Using .