Resources

In a biological cell model, an enzymatic decomposition of aqueous hydrogen peroxide, 2H2O2(aq)→2H2O(l)+O2(g)2\text{H}_2\text{O}_2(aq) \rightarrow 2\text{H}_2\text{O}(l) + \text{O}_2(g), takes place at a constant temperature of 298 K298\text{ K} and an ambient pressure of 1.00 atm1.00\text{ atm}. When 0.250 mol0.250\text{ mol} of H2O2\text{H}_2\text{O}_2 completely decomposes, 24.5 kJ24.5\text{ kJ} of heat is transferred to the surrounding aqueous buffer (q=−24.5 kJq = -24.5\text{ kJ}). Assuming the generated O2(g)\text{O}_2(g) behaves as an ideal gas and expands against the constant atmospheric pressure (1.00 atm1.00\text{ atm}), while the volume of liquid remains negligible: (a) calculate the pressure-volume work ww (in J\text{J}) done by the system, and (b) calculate the net change in internal energy ΔU\Delta U (in kJ\text{kJ}) of the chemical reaction system. (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})).

Answer and steps

Final answer

(a) w=−3.10×102 Jw = -3.10 \times 10^2\text{ J} (or −0.310 kJ-0.310\text{ kJ}); (b) ΔU=−24.8 kJ\Delta U = -24.8\text{ kJ}.

Steps

Part (a): Calculate the Pressure-Volume Work (ww)

  1. Determine the moles of gas produced (Δng\Delta n_g): According to the balanced chemical equation: 2HX2OX2(aq)→2HX2O(l)+OX2(g)2\ce{H2O2}(aq) \rightarrow 2\ce{H2O}(l) + \ce{O2}(g) Two moles of HX2OX2\ce{H2O2} decompose to produce one mole of OX2(g)\ce{O2}(g). For 0.250 mol0.250\text{ mol} of HX2OX2\ce{H2O2}: Δng=0.250 mol HX2OX2×1 mol OX22 mol HX2OX2=0.125 mol OX2\Delta n_g = 0.250\text{ mol }\ce{H2O2} \times \frac{1\text{ mol }\ce{O2}}{2\text{ mol }\ce{H2O2}} = 0.125\text{ mol }\ce{O2}
  2. Relate expansion work to ideal gas behavior: The pressure-volume work performed against a constant external pressure is defined as: w=−PextΔVw = -P_{\text{ext}}\Delta V Assuming the generated OX2(g)\ce{O2}(g) behaves as an ideal gas and the initial volume of the gas is zero (since reactants are in the aqueous phase and changes in liquid volume are negligible): PextΔV≈ΔngRTP_{\text{ext}}\Delta V \approx \Delta n_g R T Therefore: w=−ΔngRTw = -\Delta n_g R T
  3. Compute the numerical value of ww: Substitute the given values (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) and T=298 KT = 298\text{ K}): w=−(0.125 mol)(8.314 J/(mol⋅K))(298 K)=−309.7 J≈−3.10×102 Jw = -(0.125\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K}) = -309.7\text{ J} \approx -3.10 \times 10^2\text{ J}

    (Note: The negative sign indicates that the system does work on the surroundings by expanding against the atmosphere.)


Part (b): Calculate the Change in Internal Energy (ΔU\Delta U)

  1. Apply the First Law of Thermodynamics: The net change in the system's internal energy is given by: ΔU=q+w\Delta U = q + w
  2. Convert units to remain consistent:

    • Heat released by the system: q=−24.5 kJq = -24.5\text{ kJ}
    • Work done by the system in kilojoules: w=−309.7 J=−0.310 kJw = -309.7\text{ J} = -0.310\text{ kJ}
  3. Calculate ΔU\Delta U: ΔU=−24.5 kJ+(−0.310 kJ)=−24.81 kJ≈−24.8 kJ\Delta U = -24.5\text{ kJ} + (-0.310\text{ kJ}) = -24.81\text{ kJ} \approx -24.8\text{ kJ}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign convention for work done by an expanding system, calculating positive work w = +P*ΔV and improperly increasing internal energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(O2)=0.2502=0.125 moln(\text{O}_2) = \frac{0.250}{2} = 0.125\text{ mol}

  2. Step 2

    w=P∗ΔV=n∗R∗T  ⟹  w=(0.125)(8.314)(298)=310 J  ⟹  w=0.310 kJw = P * \Delta V = n * R * T \implies w = (0.125)(8.314)(298) = 310\text{ J} \implies w = 0.310\text{ kJ}

    Correct

    w=−PextΔV=−ΔngRT=−(0.125 mol)(8.314 J/(mol⋅K))(298 K)=−3.10×102 Jw = -P_{\text{ext}}\Delta V = -\Delta n_g RT = -(0.125\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K}) = -3.10 \times 10^2\text{ J} (or −0.310 kJ-0.310\text{ kJ})

    In chemical thermodynamics, expansion work done by the system against an external pressure is defined as w=−PextΔVw = -P_{\text{ext}}\Delta V. Because gas is produced and pushes outward (ΔV>0\Delta V > 0), the system loses energy by doing work on the surroundings, so ww must be negative.

  3. Step 3

    ΔU=q+w=−24.5 kJ+0.310 kJ=−24.2 kJ\Delta U = q + w = -24.5\text{ kJ} + 0.310\text{ kJ} = -24.2\text{ kJ}

    Correct

    ΔU=q+w=−24.5 kJ+(−0.310 kJ)=−24.8 kJ\Delta U = q + w = -24.5\text{ kJ} + (-0.310\text{ kJ}) = -24.8\text{ kJ}

    Your formula ΔU=q+w\Delta U = q + w and unit conversion are completely correct, but the positive sign from Step 2 carried into this step, reducing the total energy lost instead of adding to it.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the 2:1 stoichiometric ratio to find that 0.125 mol0.125\text{ mol} of O2(g)\text{O}_2(g) is produced.

You recognized the ideal gas connection PΔV=nRTP\Delta V = nRT to evaluate pressure-volume work.

You properly stated the First Law equation ΔU=q+w\Delta U = q + w and matched units between kilojoules and joules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention for expansion work

Omitting the negative sign in w=−PextΔVw = -P_{\text{ext}}\Delta V, setting w=+nRTw = +nRT instead of w=−nRTw = -nRT.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the magnitude of work with the thermodynamic sign convention from the perspective of the system. An expanding gas does work on the surroundings, meaning energy leaves the system and ww must be negative.

REASONING PATH
Your ACEpath teacher’s suggested approach
System Perspective for Work
  • w=−PextΔVw = -P_{\text{ext}}\Delta V (IUPAC convention).

  • Whenever gas is formed or expands (ΔV>0\Delta V > 0), check that w<0w < 0. If gas is consumed or compressed (ΔV<0\Delta V < 0), check that w>0w > 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the thermodynamic work equation: w=−ΔngRTw = -\Delta n_g RT

  2. Substitute the values: w=−(0.125 mol)(8.314 J/(mol⋅K))(298 K)=−309.7 J≈−3.10×102 Jw = -(0.125\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K}) = -309.7\text{ J} \approx -3.10 \times 10^2\text{ J}

  3. Convert to kilojoules: w=−0.310 kJw = -0.310\text{ kJ}

  4. Substitute into the First Law: ΔU=q+w=−24.5 kJ+(−0.310 kJ)=−24.8 kJ\Delta U = q + w = -24.5\text{ kJ} + (-0.310\text{ kJ}) = -24.8\text{ kJ}

Final answer

(a) w=−3.10×102 Jw = -3.10 \times 10^2\text{ J} (or −0.310 kJ-0.310\text{ kJ}); (b) ΔU=−24.8 kJ\Delta U = -24.8\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out w=−PextΔV=−ΔngRTw = -P_{\text{ext}}\Delta V = -\Delta n_g RT with the explicit minus sign before plugging in numbers.

  • Perform a physical sanity check: if the system pushes out against the atmosphere, it spends energy, so its internal energy must decrease further (w<0w < 0).

OverviewACEpath Teacher's Diagnosis

02 The student neglects the stoichiometric 2:1 ratio and assumes 0.250 mol of O2 gas is produced from 0.250 mol of H2O2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n(O2)=0.250 moln(\text{O}_2) = 0.250\text{ mol}

    Correct

    Δng=0.250 mol HX2OX2×1 mol OX22 mol HX2OX2=0.125 mol OX2\Delta n_g = 0.250\text{ mol }\ce{H2O2} \times \frac{1\text{ mol }\ce{O2}}{2\text{ mol }\ce{H2O2}} = 0.125\text{ mol }\ce{O2}

    You assumed that 0.250 mol0.250\text{ mol} of HX2OX2\ce{H2O2} produces 0.250 mol0.250\text{ mol} of OX2\ce{O2}. According to the balanced equation 2HX2OX2(aq)→2HX2O(l)+OX2(g)2\ce{H2O2}(aq) \rightarrow 2\ce{H2O}(l) + \ce{O2}(g), 2 moles2\text{ moles} of HX2OX2\ce{H2O2} generate only 1 mole1\text{ mole} of OX2(g)\ce{O2}(g), yielding 0.125 mol0.125\text{ mol} of gas.

  2. Step 2

    w=−n⋅R⋅T=−(0.250)(8.314)(298)=−619 Jw = -n \cdot R \cdot T = -(0.250)(8.314)(298) = -619\text{ J}

    Correct

    w=−ΔngRT=−(0.125 mol)(8.314 J/(mol⋅K))(298 K)=−3.10×102 Jw = -\Delta n_g R T = -(0.125\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K}) = -3.10 \times 10^2\text{ J}

    Your formula w=−nRTw = -nRT and arithmetic were correct, but substituting the incorrect molar amount doubled your calculated work value.

  3. Step 3

    w=−0.619 kJ  ⟹  ΔU=q+w=−24.5 kJ+(−0.619 kJ)=−25.1 kJw = -0.619\text{ kJ} \implies \Delta U = q + w = -24.5\text{ kJ} + (-0.619\text{ kJ}) = -25.1\text{ kJ}

    Correct

    ΔU=q+w=−24.5 kJ+(−0.310 kJ)=−24.8 kJ\Delta U = q + w = -24.5\text{ kJ} + (-0.310\text{ kJ}) = -24.8\text{ kJ}

    You correctly stated the First Law of Thermodynamics and converted units consistently, but the final value was affected by the initial stoichiometric error.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that gas expansion against constant pressure relates to ideal gas behavior via w=−ΔngRTw = -\Delta n_g R T.

You used the correct sign convention for work done by an expanding system.

You correctly applied the First Law equation ΔU=q+w\Delta U = q + w with consistent unit conversions from joules to kilojoules.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Stoichiometry mole ratio omission

You used the moles of the decomposing liquid reactant directly as the moles of evolved gas without checking the stoichiometric coefficients.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the mole conversion between reactant consumed and gas produced when transitioning from chemical reaction stoichiometry to physical thermodynamic formulas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Gas Mole Changes (\Delta n_g)
  • Only gaseous products and reactants contribute to Δng\Delta n_g in expansion work: Δng=∑ngas, products−∑ngas, reactants\Delta n_g = \sum n_{\text{gas, products}} - \sum n_{\text{gas, reactants}}.

  • Always multiply the given moles of reactant by the stoichiometric mole ratio coefficient of gascoefficient of reactant\frac{\text{coefficient of gas}}{\text{coefficient of reactant}} before inserting nn into thermodynamic formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the moles of OX2(g)\ce{O2}(g) produced: Δng=0.250 mol HX2OX2×1 mol OX22 mol HX2OX2=0.125 mol\Delta n_g = 0.250\text{ mol }\ce{H2O2} \times \frac{1\text{ mol }\ce{O2}}{2\text{ mol }\ce{H2O2}} = 0.125\text{ mol}.

  2. Calculate expansion work: w=−ΔngRT=−(0.125 mol)(8.314 J/(mol⋅K))(298 K)=−309.7 J≈−3.10×102 Jw = -\Delta n_g R T = -(0.125\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K}) = -309.7\text{ J} \approx -3.10 \times 10^2\text{ J} (or −0.310 kJ-0.310\text{ kJ}).

  3. Calculate change in internal energy: ΔU=q+w=−24.5 kJ+(−0.310 kJ)=−24.81 kJ≈−24.8 kJ\Delta U = q + w = -24.5\text{ kJ} + (-0.310\text{ kJ}) = -24.81\text{ kJ} \approx -24.8\text{ kJ}.

Final answer

(a) w=−3.10×102 Jw = -3.10 \times 10^2\text{ J} (or −0.310 kJ-0.310\text{ kJ}); (b) ΔU=−24.8 kJ\Delta U = -24.8\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the stoichiometric mole ratio conversion explicitly as a separate first line before writing thermodynamic equations.

  • Verify state symbols in the chemical equation to ensure that only species labeled (g)(g) are included in Δng\Delta n_g.

OverviewACEpath Teacher's Diagnosis

03 The student adds heat and work directly without converting work from joules to kilojoules, causing a massive dimensional inconsistency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(O2)=0.250/2=0.125 moln(\text{O}_2) = 0.250/2 = 0.125\text{ mol}

  2. Step 2

    w=−n∗R∗T=−(0.125)(8.314)(298)=−310 Jw = -n * R * T = -(0.125)(8.314)(298) = -310\text{ J}

  3. Step 3

    ΔU=q+w  ⟹  ΔU=−24.5+(−310)=−334.5 kJ\Delta U = q + w \implies \Delta U = -24.5 + (-310) = -334.5\text{ kJ}

    Correct

    ΔU=q+w=−24.5 kJ+(−0.310 kJ)=−24.8 kJ\Delta U = q + w = -24.5\text{ kJ} + (-0.310\text{ kJ}) = -24.8\text{ kJ}

    You wrote the correct First Law formula ΔU=q+w\Delta U = q + w, but you added q=−24.5 kJq = -24.5\text{ kJ} directly to w=−310 Jw = -310\text{ J} without converting ww into kilojoules.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used stoichiometry to calculate the moles of oxygen gas evolved.

You used the correct equation and sign convention for pressure-volume expansion work.

You stated the correct First Law equation ΔU=q+w\Delta U = q + w.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit mismatch in thermodynamic addition

You combined −24.5-24.5 and −310-310 as if both terms were already in kilojoules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking dimensional consistency when combining thermodynamic quantities that are naturally computed in different SI metric prefixes (qq typically in kJ\text{kJ} and ww from R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}) in J\text{J}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Energy Units Before Adding
  • Quantities added in ΔU=q+w\Delta U = q + w must share identical units (both J\text{J} or both kJ\text{kJ}).

  • Divide ww in joules by 10001000 to obtain kilojoules before adding it to qq.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert work from joules to kilojoules: w=−310 J1000 J/kJ=−0.310 kJw = \frac{-310\text{ J}}{1000\text{ J}/\text{kJ}} = -0.310\text{ kJ}.

  2. Substitute q=−24.5 kJq = -24.5\text{ kJ} and w=−0.310 kJw = -0.310\text{ kJ} into the First Law: ΔU=q+w=−24.5 kJ+(−0.310 kJ)\Delta U = q + w = -24.5\text{ kJ} + (-0.310\text{ kJ}).

  3. Compute the sum: ΔU=−24.81 kJ≈−24.8 kJ\Delta U = -24.81\text{ kJ} \approx -24.8\text{ kJ}.

Final answer

(a) w=−3.10×102 Jw = -3.10 \times 10^2\text{ J} (or −0.310 kJ-0.310\text{ kJ}); (b) ΔU=−24.8 kJ\Delta U = -24.8\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write explicit unit labels next to numerical values when substituting into ΔU=q+w\Delta U = q + w.

  • Watch out for the gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), which always yields work or energy in joules, not kilojoules.

Lock it in

Similar question

01

The decomposition of ammonium nitrate is given by NH4NO3(s)→N2O(g)+2H2O(g)\text{NH}_4\text{NO}_3(s) \rightarrow \text{N}_2\text{O}(g) + 2\text{H}_2\text{O}(g) at 298 K298\text{ K}. Calculate the work ww (in J\text{J}) when 0.100 mol0.100\text{ mol} of NH4NO3(s)\text{NH}_4\text{NO}_3(s) decomposes completely against a constant external pressure of 1.00 atm1.00\text{ atm}. (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}))

Answer

w=−7.43×102 Jw = -7.43 \times 10^2\text{ J}. Key steps: Δng=0.100 mol×(1+2)=0.300 mol of gas\Delta n_g = 0.100\text{ mol} \times (1 + 2) = 0.300\text{ mol of gas}. Using w=−ΔngRT=−(0.300 mol)(8.314 J/(mol⋅K))(298 K)=−743.3 J≈−7.43×102 Jw = -\Delta n_g RT = -(0.300\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(298\text{ K}) = -743.3\text{ J} \approx -7.43 \times 10^2\text{ J}.

02

In an engine cylinder at 298 K298\text{ K}, 0.0500 mol0.0500\text{ mol} of a fuel vapor undergoes combustion, releasing 120.0 kJ120.0\text{ kJ} of heat (q=−120.0 kJq = -120.0\text{ kJ}). The reaction causes a net increase of 0.150 mol0.150\text{ mol} of gas. Calculate (a) ww in kJ\text{kJ} and (b) ΔU\Delta U in kJ\text{kJ} for the system.

Answer

(a) w=−0.372 kJw = -0.372\text{ kJ}; (b) ΔU=−120.4 kJ\Delta U = -120.4\text{ kJ}. Key steps: w=−ΔngRT=−(0.150)(8.314)(298)=−371.6 J=−0.372 kJw = -\Delta n_g RT = -(0.150)(8.314)(298) = -371.6\text{ J} = -0.372\text{ kJ}. Then ΔU=q+w=−120.0 kJ+(−0.372 kJ)=−120.372 kJ≈−120.4 kJ\Delta U = q + w = -120.0\text{ kJ} + (-0.372\text{ kJ}) = -120.372\text{ kJ} \approx -120.4\text{ kJ}.

03

Consider the synthesis of ammonia: N2(g)+3H2(g)→2NH3(g)\text{N}_2(g) + 3\text{H}_2(g) \rightarrow 2\text{NH}_3(g) at a constant temperature of 400 K400\text{ K}. When 1.00 mol1.00\text{ mol} of N2\text{N}_2 reacts completely with excess H2\text{H}_2, the heat exchanged is q=−92.2 kJq = -92.2\text{ kJ}. Calculate ww (in kJ\text{kJ}) and ΔU\Delta U (in kJ\text{kJ}) for this reaction.

Answer

w=+6.65 kJw = +6.65\text{ kJ}, ΔU=−85.6 kJ\Delta U = -85.6\text{ kJ}. Key steps: Δng=2−(1+3)=−2.00 mol\Delta n_g = 2 - (1 + 3) = -2.00\text{ mol}. Work is w=−ΔngRT=−(−2.00 mol)(8.314 J/(mol⋅K))(400 K)=+6651 J=+6.65 kJw = -\Delta n_g RT = -(-2.00\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(400\text{ K}) = +6651\text{ J} = +6.65\text{ kJ} (compression work done on the system). Then ΔU=q+w=−92.2 kJ+6.65 kJ=−85.55 kJ≈−85.6 kJ\Delta U = q + w = -92.2\text{ kJ} + 6.65\text{ kJ} = -85.55\text{ kJ} \approx -85.6\text{ kJ}.

Loading workspace…