Resources

Consider a neutral atom in the ground state that has exactly 33 valence electrons residing in its outermost shell with principal quantum number n=4n = 4. (a) Determine the identity of this element and its IUPAC group number. (b) Write its complete ground-state electron configuration, and (c) calculate the ratio of the number of core (inner-shell) electrons to the number of valence electrons in this atom.

Answer and steps

Final answer

(a) Gallium (Ga\text{Ga}), Group 1313; (b) 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^1 (or [Ar] 3d10 4s2 4p1[\text{Ar}]\,3d^{10}\,4s^2\,4p^1); (c) 283\frac{28}{3} (or approximately 9.339.33).

Steps

01

Identify the Element and IUPAC Group Number

  1. Analyze the valence shell: The problem states that the atom has valence electrons in the outermost shell with principal quantum number n=4n = 4. This places the element in Period 4 of the periodic table.
  2. Determine the subshell occupancy: For main-group elements, valence electrons occupy the outermost ss and pp orbitals. Three valence electrons in shell n=4n = 4 correspond to: 4s2 4p14s^2\,4p^1
  3. Determine the group number and element:

    • In the modern IUPAC system, elements filling the pp subshell belong to groups 1313 through 1818, calculated as: Group Number=10+number of valence electrons=10+3=13\text{Group Number} = 10 + \text{number of valence electrons} = 10 + 3 = 13
    • Following the Aufbau principle, filling up to 4p14p^1 requires completely filling all lower-energy subshells: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,4s^2\,3d^{10}\,4p^1
    • Summing all electrons yields the atomic number ZZ: Z=2+2+6+2+6+2+10+1=31Z = 2 + 2 + 6 + 2 + 6 + 2 + 10 + 1 = 31 The neutral atom with atomic number Z=31Z = 31 is Gallium (Ga\ce{Ga}).

02

Write the Complete Ground-State Electron Configuration

Ordering by increasing principal quantum number (or Aufbau filling order): 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^1

In noble gas condensed notation, using the Argon core ([Ar]=1s2 2s2 2p6 3s2 3p6[\ce{Ar}] = 1s^2\,2s^2\,2p^6\,3s^2\,3p^6): [Ar] 3d10 4s2 4p1[\ce{Ar}]\,3d^{10}\,4s^2\,4p^1


03

Calculate the Ratio of Core to Valence Electrons

  1. Count valence electrons: Valence electrons are the electrons in the outermost principal energy level (n=4n = 4): Valence electrons=2 (4s)+1 (4p)=3\text{Valence electrons} = 2\,(4s) + 1\,(4p) = 3
  2. Count core (inner-shell) electrons: Core electrons are all non-valence electrons: Core electrons=Z−valence electrons=31−3=28\text{Core electrons} = Z - \text{valence electrons} = 31 - 3 = 28 (These include the n=1n=1 shell with 22, n=2n=2 shell with 88, and n=3n=3 shell with 2+6+10=182 + 6 + 10 = 18 electrons, totaling 2+8+18=282 + 8 + 18 = 28.)

    Common Pitfall: Although the 3d3d subshell fills after 4s4s, once completely filled (3d103d^{10}), it lies lower in energy than the n=4n = 4 shell and is part of the inner core (n=3n=3), not the valence shell.

  3. Compute the ratio: Ratio=Core electronsValence electrons=283≈9.33\text{Ratio} = \frac{\text{Core electrons}}{\text{Valence electrons}} = \frac{28}{3} \approx 9.33

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the outermost shell electrons with total valence electrons in transition metals, identifying the atom with 3 valence electrons and highest n = 4 as scandium (4s² 3d¹) in Group 3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Outermost n=4n=4 has valence electrons: 4s2 3d14s^2\ 3d^1

    Correct

    Outermost shell (n=4n=4) valence electrons: 4s2 4p14s^2\ 4p^1

    The 3d3d subshell has principal quantum number n=3n = 3, so it is not part of the outermost n=4n = 4 shell. Three valence electrons residing in shell n=4n = 4 must fill the 4s4s and 4p4p subshells as 4s2 4p14s^2\,4p^1.

  2. Step 2

    Scandium (Sc) , IUPAC Group 3

    Correct

    Gallium (Ga\ce{Ga}), IUPAC Group 13

    Because of the subshell assignment in Step 1, you identified the element as Scandium. An atom with a 4s2 4p14s^2\,4p^1 valence shell has atomic number Z=31Z = 31, which is Gallium (Ga\ce{Ga}) in IUPAC Group 13.

  3. Step 3

    1s2 2s2 2p6 3s2 3p6 4s2 3d11s^2\ 2s^2\ 2p^6\ 3s^2\ 3p^6\ 4s^2\ 3d^1

    Correct

    1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\ 2s^2\ 2p^6\ 3s^2\ 3p^6\ 3d^{10}\ 4s^2\ 4p^1

    You wrote the correct ground-state configuration for Scandium, but following the correct identification of Gallium, all subshells up to 4p14p^1 must be filled, including the completely filled 3d103d^{10} subshell.

  4. Step 4

    Core electrons = 21−3=18  ⟹  Ratio=18/3=621 - 3 = 18 \implies \text{Ratio} = 18 / 3 = 6

    Correct

    Core electrons = 31−3=28  ⟹  Ratio=283≈9.3331 - 3 = 28 \implies \text{Ratio} = \frac{28}{3} \approx 9.33

    Your subtraction and ratio formulas were executed correctly for Scandium, but for Gallium (Z=31Z = 31), the number of core electrons is 31−3=2831 - 3 = 28, giving a ratio of 283\frac{28}{3}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the number of core electrons equals the total atomic number minus the valence electrons.

You accurately calculated the ratio from your derived numbers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misinterpreting Principal Quantum Number of Valence Shell

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You included the (n−1)d(n-1)d subshell (3d3d) as part of the outermost n=4n = 4 shell. In atomic structure, the outermost shell consists strictly of orbitals with the highest principal quantum number nn (4s4s and 4p4p), whereas completely or partially filled 3d3d orbitals belong to the n=3n = 3 shell.

REASONING PATH
Your ACEpath teacher’s suggested approach
Defining Outermost Shell vs. Valence Electrons
  • Electrons in the outermost shell strictly have the maximum principal quantum number nn. For Period 4 main-group elements, these are solely the 4s4s and 4p4p electrons.

  • When a problem specifies electrons residing in shell nn, fill only the subshells with that exact principal quantum number (nsns and npnp).

Role of the $3d$ Subshell in Main-Group Atoms
  • Once the 3d3d subshell is filled (3d103d^{10}), it acts as part of the inner core (n=3n=3) and is not counted among the outermost valence electrons.

  • Include 3d103d^{10} in the core electron count when finding the core-to-valence ratio for post-transition main-group elements.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Assign the 3 electrons with principal quantum number n=4n = 4 to the 4s4s and 4p4p subshells: 4s2 4p14s^2\,4p^1.

  2. Determine the element and group: An atom with configuration ending in 4s2 4p14s^2\,4p^1 has Z=31Z = 31, which is Gallium (Ga\ce{Ga}) in Group 10+3=1310 + 3 = 13.

  3. Write the complete configuration: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^1.

  4. Count core electrons: Z−valence=31−3=28Z - \text{valence} = 31 - 3 = 28.

  5. Compute the ratio: 283\frac{28}{3}.

Final answer

(a) Gallium (Ga\ce{Ga}), Group 13; (b) 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^1; (c) 283\frac{28}{3} (or ≈9.33\approx 9.33)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between 'outermost shell electrons' (highest nn) and 'valence electrons' in transition metals versus main-group elements.

  • Practice identifying elements when given specific subshell occupancies for a stated principal quantum number nn.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly treats filled (n - 1)d subshells as valence electrons rather than core electrons, counting 13 valence electrons and 18 core electrons for gallium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Outermost shell n=4n=4 has 33 electrons: 4s2 4p1  ⟹  Gallium (Ga), IUPAC Group 134s^2\,4p^1 \implies \text{Gallium (Ga), IUPAC Group } 13

  2. Step 2

    1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,4s^2\,3d^{10}\,4p^1

  3. Step 3

    Valence electrons=4s2+3d10+4p1=13  ⟹  Core electrons=31−13=18\text{Valence electrons} = 4s^2 + 3d^{10} + 4p^1 = 13 \implies \text{Core electrons} = 31 - 13 = 18

    Correct

    Valence electrons=3\text{Valence electrons} = 3 (4s2 4p14s^2\,4p^1), Core electrons=31−3=28\text{Core electrons} = 31 - 3 = 28

    For main-group (p-block) elements, valence electrons are strictly those in the outermost shell (n=4n=4). A completely filled (n−1)d(n-1)d subshell, such as 3d103d^{10}, belongs to the inner shell (n=3n=3) and counts toward core electrons, not valence electrons.

  4. Step 4

    Ratio=18/13\text{Ratio} = 18/13

    Correct

    Ratio=283\text{Ratio} = \frac{28}{3} (or ≈9.33\approx 9.33)

    Your ratio calculation correctly took your core count divided by your valence count, but it inherited the misclassified electron counts from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced that n=4n=4 with 33 valence electrons gives a 4s2 4p14s^2\,4p^1 outer configuration.

You identified the element as gallium and correctly assigned it to IUPAC Group 13.

You wrote a valid, fully filled Aufbau electron configuration totaling 31 electrons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misclassifying filled (n-1)d subshell as valence electrons

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the filled 3d103d^{10} subshell as part of the valence shell because it appears adjacent to 4s4s and 4p4p in the Aufbau filling order, overlooking the fact that valence electrons for main-group elements are defined solely by the highest principal quantum number (n=4n=4). Once filled, (n−1)d(n-1)d orbitals drop lower in energy than nsns orbitals and form part of the noble-gas/inner-shell core.

REASONING PATH
Your ACEpath teacher’s suggested approach
Valence Electrons in the p-Block
  • For main-group elements (s- and p-blocks), valence electrons are only those in subshells with the highest principal quantum number: nsns and npnp.

  • Do not count filled (n−1)d10(n-1)d^{10} or (n−2)f14(n-2)f^{14} subshells as valence electrons; assign them entirely to the core.

Core Electron Complementarity
  • Core electrons=Z−Valence electrons\text{Core electrons} = Z - \text{Valence electrons}.

  • First verify that your valence electron count matches the group convention (13−10=313 - 10 = 3), then subtract that number from total electrons ZZ to find the core.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify valence electrons as only those in the outermost shell (n=4n=4): Valence electrons=2 (4s)+1 (4p)=3\text{Valence electrons} = 2\,(4s) + 1\,(4p) = 3.

  2. Calculate core electrons by subtracting valence electrons from total electrons (Z=31Z=31): Core electrons=31−3=28\text{Core electrons} = 31 - 3 = 28.

  3. Compute the required ratio: Core electronsValence electrons=283≈9.33\frac{\text{Core electrons}}{\text{Valence electrons}} = \frac{28}{3} \approx 9.33.

Final answer

(a) Gallium (Ga\text{Ga}), Group 1313; (b) 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^1; (c) 283\frac{28}{3} (or ≈9.33\approx 9.33)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of valence electrons for main-group elements versus transition metals.

  • Practice grouping electrons by principal quantum number shell (n=1,2,3,4n=1, 2, 3, 4) to clearly separate core from valence.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the IUPAC group number by using the CAS/old American group label number 3 instead of the 1-18 IUPAC group numbering 13.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Outermost shell n=4n = 4 with 33 electrons: 4s24p14s^2 4p^1   ⟹  \implies Gallium (Ga), IUPAC Group 3

    Correct

    Outermost shell n=4n = 4 with 33 valence electrons has configuration 4s2 4p14s^2\,4p^1, which corresponds to Gallium (Ga\text{Ga}), IUPAC Group 1313.

    You correctly deduced the valence configuration 4s2 4p14s^2\,4p^1 and identified the element as Gallium (Ga\text{Ga}). However, in the modern 1–18 IUPAC numbering system, the pp-block groups are numbered 1313 through 1818 because they follow the ten dd-block transition groups. Gallium belongs to Group 1313, whereas Group 33 is the scandium group in the dd-block.

  2. Step 2

    1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^1

  3. Step 3

    Core electrons =28= 28   ⟹  \implies Valence electrons =3= 3   ⟹  \implies Ratio =28/3= 28/3

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted the valence shell principal quantum number n=4n = 4 and three valence electrons to deduce the outer configuration 4s2 4p14s^2\,4p^1.

You correctly identified the element as Gallium (Ga\text{Ga}).

You accurately wrote the complete full-shell ground-state electron configuration.

You correctly classified the completely filled 3d103d^{10} subshell as part of the core electrons to find the core-to-valence ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
IUPAC group numbering confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the older CAS/American group notation (Group 3A / IIIA) or the valence electron count (33) with the modern IUPAC 1–18 group numbering system. Because ten transition metals (dd-block) lie between the ss-block and pp-block in Period 4, main-group elements in the pp-block have IUPAC group numbers equal to 10+valence electrons10 + \text{valence electrons}, placing Gallium in Group 13.

REASONING PATH
Your ACEpath teacher’s suggested approach
IUPAC 1–18 Group Numbering for p-block Elements
  • For main-group pp-block elements, the IUPAC group number is given by 10+number of valence electrons10 + \text{number of valence electrons} (Groups 1313 through 1818).

  • Always add 1010 to the number of valence electrons when naming the IUPAC group for any pp-block element.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the subshell of the valence electrons: the atom ends in 4p14p^1, which is in the pp-block.

  2. Calculate the IUPAC group number by including the 22 ss-block columns and 1010 dd-block columns: Group=10+3=13\text{Group} = 10 + 3 = 13.

Final answer

(a) Gallium (Ga\text{Ga}), Group 1313; (b) 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p11s^2\,2s^2\,2p^6\,3s^2\,3p^6\,3d^{10}\,4s^2\,4p^1; (c) 283\frac{28}{3}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the differences between older group notation (such as Group 3A) and modern IUPAC continuous numbering (11 to 1818).

  • Practice identifying the IUPAC group number directly from valence electron configurations across different blocks (ss, pp, and dd).

Lock it in

Similar question

01

A neutral ground-state atom has exactly 4 electrons residing in its outermost shell with n=4n = 4. Identify the element and state the number of core electrons.

Answer

Germanium (Ge\ce{Ge}, Z=32Z = 32). Outermost shell configuration is 4s2 4p24s^2\,4p^2 (4 valence electrons). Core electrons = 32−4=2832 - 4 = 28.

02

An element in the ground state has a total of 5 valence electrons, but only 2 of them reside in its highest principal energy level n=4n = 4. Identify the element, its IUPAC group, and write its condensed electron configuration.

Answer

Vanadium (V\ce{V}, Group 5). The 2 outermost electrons are 4s24s^2, and the remaining 3 valence electrons are 3d33d^3. Condensed configuration: [Ar] 3d3 4s2[\ce{Ar}]\,3d^3\,4s^2.

03

Consider a neutral atom with ground-state outermost shell configuration 5s2 5p35s^2\,5p^3. Determine: (a) the element's identity and group number, and (b) the ratio of core electrons to valence electrons.

Answer

(a) Antimony (Sb\ce{Sb}, Z=51Z = 51), Group 15. (b) It has 5 valence electrons in n=5n = 5 (5s2 5p35s^2\,5p^3) and 51−5=4651 - 5 = 46 core electrons. The core-to-valence ratio is 465=9.2\frac{46}{5} = 9.2.

Loading workspace…