Resources

A rigid cylinder filled with oxygen gas is stored in an outdoor cryogenic testing shed at −45.0∘C-45.0^\circ\text{C}, displaying a gauge pressure of 18.5 psi18.5\text{ psi}. After the cylinder is moved inside a climate-controlled laboratory at 25.0∘C25.0^\circ\text{C}, calculate the new gauge pressure of the oxygen gas in psi\text{psi}, assuming atmospheric pressure is exactly 14.7 psi14.7\text{ psi} and the volume remains unchanged.

Answer and steps

Final answer

28.7 psi28.7\text{ psi}

Steps

01

Convert temperatures to the Kelvin scale

To find the new gauge pressure, we apply Gay-Lussac's Law, which describes the direct relationship between the pressure and temperature of a fixed amount of gas at constant volume: P1T1=P2T2\frac{P_1}{T_1} = \frac{P_2}{T_2}

Important Pitfall: Gas law calculations must always use absolute temperature (in Kelvin) and absolute pressure (total pressure), rather than Celsius temperatures or gauge pressures.


Add 273.15273.15 to each Celsius temperature:

T1=−45.0∘C+273.15=228.15 KT_1 = -45.0^\circ\text{C} + 273.15 = 228.15\text{ K}

T2=25.0∘C+273.15=298.15 KT_2 = 25.0^\circ\text{C} + 273.15 = 298.15\text{ K}


02

Convert the initial gauge pressure to absolute pressure

Absolute pressure is the sum of gauge pressure and atmospheric pressure:

Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}

P1=18.5 psi+14.7 psi=33.2 psiP_1 = 18.5\text{ psi} + 14.7\text{ psi} = 33.2\text{ psi}


03

Calculate the final absolute pressure (P2P_2)

Rearrange Gay-Lussac's Law to solve for P2P_2:

P2=P1⋅T2T1P_2 = P_1 \cdot \frac{T_2}{T_1}

Substitute the values:

P2=33.2 psi⋅298.15 K228.15 K≈43.386 psiP_2 = 33.2\text{ psi} \cdot \frac{298.15\text{ K}}{228.15\text{ K}} \approx 43.386\text{ psi}


04

Convert the final absolute pressure back to gauge pressure

Subtract atmospheric pressure from the absolute pressure:

Pgauge,2=P2−PatmP_{\text{gauge}, 2} = P_2 - P_{\text{atm}}

Pgauge,2=43.386 psi−14.7 psi≈28.7 psiP_{\text{gauge}, 2} = 43.386\text{ psi} - 14.7\text{ psi} \approx 28.7\text{ psi}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student directly uses gauge pressures in Gay-Lussac's Law without converting to absolute pressure, yielding an incorrect final gauge pressure of 24.2 psi.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1=−45.0+273.15=228.15 KT_1 = -45.0 + 273.15 = 228.15\text{ K} ⟹\Longrightarrow T2=25.0+273.15=298.15 KT_2 = 25.0 + 273.15 = 298.15\text{ K}

  2. Step 2

    P2T2=P1T1\frac{P_2}{T_2} = \frac{P_1}{T_1}

  3. Step 3

    P2=18.5×298.15228.15=24.176 psiP_2 = 18.5 \times \frac{298.15}{228.15} = 24.176\text{ psi}

    Correct

    P1,abs=18.5+14.7=33.2 psi⟹P2,abs=33.2×298.15228.15≈43.386 psiP_{1,\text{abs}} = 18.5 + 14.7 = 33.2\text{ psi} \Longrightarrow P_{2,\text{abs}} = 33.2 \times \frac{298.15}{228.15} \approx 43.386\text{ psi}

    You used the initial gauge pressure of 18.5 psi18.5\text{ psi} directly in the equation. Gas laws depend on absolute zero particle kinetic energy and collisions, so you must always use absolute pressure (Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}).

  4. Step 4

    P2=24.2 psiP_2 = 24.2\text{ psi}

    Correct

    P2,gauge=43.386−14.7≈28.7 psiP_{2,\text{gauge}} = 43.386 - 14.7 \approx 28.7\text{ psi}

    This final value is carried over from the uncorrected gauge pressure calculation in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both Celsius temperatures to absolute temperatures in Kelvin.

You identified Gay-Lussac's Law as the appropriate relationship for a rigid container at constant volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Absolute Pressure Conversion

You treated the reading from the pressure gauge as the thermodynamic pressure PP.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Ideal gas laws are proportional relationships derived from kinetic molecular theory, requiring absolute scales where zero represents zero thermal energy or zero molecular collisions. Just as temperature must be expressed in Kelvin rather than Celsius, pressure must be expressed as absolute pressure (Pgauge+PatmP_{\text{gauge}} + P_{\text{atm}}) rather than gauge pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Absolute Scale Requirement
  • All ideal gas laws require absolute thermodynamic quantities: TT in Kelvin and PP in absolute pressure (Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}).

  • Always convert gauge readings to absolute pressure before substituting them into any gas law formula, then convert back to gauge pressure at the end if requested.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. P1,abs=P1,gauge+Patm=18.5 psi+14.7 psi=33.2 psiP_{1,\text{abs}} = P_{1,\text{gauge}} + P_{\text{atm}} = 18.5\text{ psi} + 14.7\text{ psi} = 33.2\text{ psi}

  2. P2,abs=P1,abs⋅T2T1=33.2 psi⋅298.15 K228.15 K≈43.386 psiP_{2,\text{abs}} = P_{1,\text{abs}} \cdot \frac{T_2}{T_1} = 33.2\text{ psi} \cdot \frac{298.15\text{ K}}{228.15\text{ K}} \approx 43.386\text{ psi}

  3. P2,gauge=P2,abs−Patm=43.386 psi−14.7 psi≈28.7 psiP_{2,\text{gauge}} = P_{2,\text{abs}} - P_{\text{atm}} = 43.386\text{ psi} - 14.7\text{ psi} \approx 28.7\text{ psi}

Final answer

28.7 psi28.7\text{ psi}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up any gas law ratio, verify whether the problem provides absolute pressure or gauge pressure.

  • If a gauge pressure is given, add local atmospheric pressure (PatmP_{\text{atm}}) to find the absolute pressure for your calculation, then subtract PatmP_{\text{atm}} if the final answer asks for gauge pressure.

OverviewACEpath Teacher's Diagnosis

02 A student correctly calculates the final absolute pressure using Gay-Lussac's Law but forgets to subtract atmospheric pressure to report gauge pressure, leaving 43.4 psi.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T1=−45.0+273.15=228.15 K  ⟹  T2=25.0+273.15=298.15 KT_1 = -45.0 + 273.15 = 228.15\text{ K} \implies T_2 = 25.0 + 273.15 = 298.15\text{ K}

  2. Step 2

    P1,abs=18.5+14.7=33.2 psiP_{1,\text{abs}} = 18.5 + 14.7 = 33.2\text{ psi}

  3. Step 3

    P2,abs=33.2×(298.15228.15)=43.39 psiP_{2,\text{abs}} = 33.2 \times \left(\frac{298.15}{228.15}\right) = 43.39\text{ psi}

  4. Step 4

    P2=43.4 psiP_2 = 43.4\text{ psi}

    Correct

    P2,gauge=43.39 psi−14.7 psi=28.7 psiP_{2,\text{gauge}} = 43.39\text{ psi} - 14.7\text{ psi} = 28.7\text{ psi}

    You stopped after finding the final absolute pressure (43.4 psi43.4\text{ psi}) instead of subtracting atmospheric pressure (14.7 psi14.7\text{ psi}) to answer the question's request for gauge pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the Celsius temperatures to absolute temperatures on the Kelvin scale.

You properly converted initial gauge pressure to absolute pressure before applying Gay-Lussac's Law.

You correctly set up and calculated the final absolute pressure using the temperature ratio.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted final gauge pressure conversion

You solved for final absolute pressure and rounded it directly as your final answer instead of converting back to gauge pressure.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating absolute pressure (PabsP_{\text{abs}}) with gauge pressure (PgaugeP_{\text{gauge}}) in the final step. While gas laws strictly operate on absolute pressure, the problem explicitly asked for the final gauge pressure, requiring Pgauge=Pabs−PatmP_{\text{gauge}} = P_{\text{abs}} - P_{\text{atm}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Required Pressure Type
  • Gas laws strictly require PabsP_{\text{abs}}, but instruments and prompts often specify PgaugeP_{\text{gauge}}.

  • Before writing your final answer, re-read the prompt to see if it asks for absolute pressure or gauge pressure.

Final Gauge Conversion
  • Pgauge=Pabs−PatmP_{\text{gauge}} = P_{\text{abs}} - P_{\text{atm}}

  • Subtract atmospheric pressure (14.7 psi14.7\text{ psi}) from your computed absolute pressure when gauge pressure is requested.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract atmospheric pressure from the absolute pressure: P2,gauge=P2,abs−PatmP_{2,\text{gauge}} = P_{2,\text{abs}} - P_{\text{atm}}

  2. P2,gauge=43.386 psi−14.7 psi=28.686 psi≈28.7 psiP_{2,\text{gauge}} = 43.386\text{ psi} - 14.7\text{ psi} = 28.686\text{ psi} \approx 28.7\text{ psi}

Final answer

28.7 psi28.7\text{ psi}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always highlight whether pressure values in the prompt are given or requested as 'gauge' or 'absolute'.

  • Make a standard two-step habit: convert gauge to absolute at the start, and convert absolute back to gauge at the end if requested.

OverviewACEpath Teacher's Diagnosis

03 A student uses temperatures in degrees Celsius directly in the pressure-temperature relationship instead of converting to Kelvin, resulting in a negative pressure of -10.3 psi.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P1,abs=18.5+14.7=33.2 psiP_{1,\text{abs}} = 18.5 + 14.7 = 33.2\text{ psi}

  2. Step 2

    P2,absT2=P1,absT1  ⟹  P2,abs=33.2×25.0−45.0=−18.44 psi\frac{P_{2,\text{abs}}}{T_2} = \frac{P_{1,\text{abs}}}{T_1} \implies P_{2,\text{abs}} = 33.2 \times \frac{25.0}{-45.0} = -18.44\text{ psi}

    Correct

    T1=−45.0+273.15=228.15 KT_1 = -45.0 + 273.15 = 228.15\text{ K}, T2=25.0+273.15=298.15 K  ⟹  P2,abs=33.2 psi×298.15 K228.15 K≈43.39 psiT_2 = 25.0 + 273.15 = 298.15\text{ K} \implies P_{2,\text{abs}} = 33.2\text{ psi} \times \frac{298.15\text{ K}}{228.15\text{ K}} \approx 43.39\text{ psi}

    Gas laws require absolute temperature in Kelvin because the kinetic energy of gas particles is directly proportional to absolute temperature. Substituting −45.0∘C-45.0^\circ\text{C} and 25.0∘C25.0^\circ\text{C} resulted in an unphysical negative absolute pressure.

  3. Step 3

    P2,gauge=−18.44−14.7=−33.14 psi  ⟹  P2,gauge=−33.1 psiP_{2,\text{gauge}} = -18.44 - 14.7 = -33.14\text{ psi} \implies P_{2,\text{gauge}} = -33.1\text{ psi}

    Correct

    P2,gauge=P2,abs−Patm=43.39 psi−14.7 psi≈28.7 psiP_{2,\text{gauge}} = P_{2,\text{abs}} - P_{\text{atm}} = 43.39\text{ psi} - 14.7\text{ psi} \approx 28.7\text{ psi}

    Your conversion from absolute pressure back to gauge pressure used the correct relationship (Pgauge=Pabs−PatmP_{\text{gauge}} = P_{\text{abs}} - P_{\text{atm}}), but the numeric value was thrown off by the temperature conversion error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that gas law calculations must use absolute pressure rather than gauge pressure.

You selected the correct relationship between pressure and temperature for a rigid container at constant volume.

You knew to subtract atmospheric pressure at the end to return the final answer as a gauge pressure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit Conversion Omission

You substituted temperatures directly in Celsius (∘C^\circ\text{C}) into the gas law ratio instead of converting them to the Kelvin (K\text{K}) absolute scale.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Gas laws model the kinetic theory of gases, where thermodynamic pressure is proportional to the average molecular kinetic energy, which scales strictly with absolute temperature (T≥0 KT \ge 0\text{ K}). Using Celsius temperatures distorts the ratio and can introduce negative values that make absolute pressure mathematically negative.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always Convert to Kelvin
  • T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15

  • Convert every temperature to Kelvin as your very first step in any gas law calculation.

Absolute Pressure Sanity Check
  • Pabs≥0P_{\text{abs}} \ge 0

  • If your calculated absolute pressure is negative or smaller after heating, pause and check your temperature units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert both temperatures to Kelvin: T1=−45.0∘C+273.15=228.15 KT_1 = -45.0^\circ\text{C} + 273.15 = 228.15\text{ K} and T2=25.0∘C+273.15=298.15 KT_2 = 25.0^\circ\text{C} + 273.15 = 298.15\text{ K}.

  2. Apply Gay-Lussac's Law: P2,abs=P1,abs⋅T2T1=33.2 psi⋅298.15 K228.15 K≈43.386 psiP_{2,\text{abs}} = P_{1,\text{abs}} \cdot \frac{T_2}{T_1} = 33.2\text{ psi} \cdot \frac{298.15\text{ K}}{228.15\text{ K}} \approx 43.386\text{ psi}.

  3. Convert to final gauge pressure: P2,gauge=P2,abs−Patm=43.386 psi−14.7 psi≈28.7 psiP_{2,\text{gauge}} = P_{2,\text{abs}} - P_{\text{atm}} = 43.386\text{ psi} - 14.7\text{ psi} \approx 28.7\text{ psi}.

Final answer

28.7 psi28.7\text{ psi}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out temperature conversions explicitly before setting up gas law formulas.

  • Double-check that any absolute quantity (temperature or pressure) is strictly non-negative throughout your work.

Lock it in

Similar question

01

A sealed steel canister has a gauge pressure of 10.0 psi10.0\text{ psi} at 20.0∘C20.0^\circ\text{C}. If the canister is heated to 80.0∘C80.0^\circ\text{C}, what is the new gauge pressure in psi\text{psi}? Assume atmospheric pressure is 14.7 psi14.7\text{ psi}.

Answer

15.1 psi15.1\text{ psi}. Convert temperatures: T1=293.15 KT_1 = 293.15\text{ K}, T2=353.15 KT_2 = 353.15\text{ K}. Convert to absolute pressure: P1,abs=10.0+14.7=24.7 psiP_{1,\text{abs}} = 10.0 + 14.7 = 24.7\text{ psi}. Compute final absolute pressure: P2,abs=24.7×353.15293.15≈29.756 psiP_{2,\text{abs}} = 24.7 \times \frac{353.15}{293.15} \approx 29.756\text{ psi}. Subtract atmospheric pressure for gauge pressure: P2,gauge=29.756−14.7≈15.1 psiP_{2,\text{gauge}} = 29.756 - 14.7 \approx 15.1\text{ psi}.

02

An automobile tire is inflated to a gauge pressure of 32.0 psi32.0\text{ psi} on a cold morning at −10.0∘C-10.0^\circ\text{C}. After highway driving, the temperature inside the tire reaches 45.0∘C45.0^\circ\text{C}. Assuming the tire volume is constant and atmospheric pressure is 14.7 psi14.7\text{ psi}, find the new gauge pressure in psi\text{psi}.

Answer

41.8 psi41.8\text{ psi}. Convert temperatures: T1=263.15 KT_1 = 263.15\text{ K}, T2=318.15 KT_2 = 318.15\text{ K}. Convert to absolute pressure: P1,abs=32.0+14.7=46.7 psiP_{1,\text{abs}} = 32.0 + 14.7 = 46.7\text{ psi}. Apply Gay-Lussac's Law: P2,abs=46.7×318.15263.15≈56.452 psiP_{2,\text{abs}} = 46.7 \times \frac{318.15}{263.15} \approx 56.452\text{ psi}. Convert back to gauge pressure: P2,gauge=56.452−14.7≈41.8 psiP_{2,\text{gauge}} = 56.452 - 14.7 \approx 41.8\text{ psi}.

03

A rigid tank contains helium at a gauge pressure of 120.0 kPa120.0\text{ kPa} at 15.0∘C15.0^\circ\text{C} in an altitude lab where ambient atmospheric pressure is 85.0 kPa85.0\text{ kPa}. The tank is cooled until the gauge pressure drops to 70.0 kPa70.0\text{ kPa}. Determine the final temperature of the gas in ∘C^\circ\text{C}.

Answer

−55.2∘C-55.2^\circ\text{C}. Find absolute pressures: P1,abs=120.0+85.0=205.0 kPaP_{1,\text{abs}} = 120.0 + 85.0 = 205.0\text{ kPa}, P2,abs=70.0+85.0=155.0 kPaP_{2,\text{abs}} = 70.0 + 85.0 = 155.0\text{ kPa}. Convert initial temperature: T1=15.0+273.15=288.15 KT_1 = 15.0 + 273.15 = 288.15\text{ K}. Solve for T2T_2: T2=T1×P2,absP1,abs=288.15×155.0205.0≈217.87 KT_2 = T_1 \times \frac{P_{2,\text{abs}}}{P_{1,\text{abs}}} = 288.15 \times \frac{155.0}{205.0} \approx 217.87\text{ K}. Convert to Celsius: T2=217.87−273.15≈−55.2∘CT_2 = 217.87 - 273.15 \approx -55.2^\circ\text{C}.

Loading workspace…