Resources

In a physical chemistry laboratory experiment, an aqueous coordination complex of manganese, [Mn(H2O)6]2+[\text{Mn}(\text{H}_2\text{O})_6]^{2+}, is analyzed using a Gouy magnetic balance. The central transition metal ion is Mn2+\text{Mn}^{2+} (Z=25Z = 25). Water is a weak-field ligand, resulting in a high-spin octahedral ligand field splitting where all five 3d3d orbitals remain effectively accessible before pairing occurs. Construct the orbital diagram for the 3d3d electrons of Mn2+\text{Mn}^{2+} in this high-spin environment, state the number of unpaired electrons, and calculate the theoretical spin-only magnetic moment μs\mu_s in Bohr magnetons (μB\mu_B) using the formula μs=n(n+2)μB\mu_s = \sqrt{n(n+2)}\mu_B, where nn represents the number of unpaired electrons.

Answer and steps

Final answer

Neutral Mn\text{Mn} has configuration [Ar]3d54s2[\text{Ar}] 3d^5 4s^2. Ionization to Mn2+\text{Mn}^{2+} removes the two 4s4s electrons, yielding [Ar]3d5[\text{Ar}] 3d^5. In a high-spin octahedral complex with weak-field ligands, the crystal field splitting Δo\Delta_o is smaller than the pairing energy PP. Consequently, Hund's rule applies across all five dd orbitals: each of the five orbitals (dxy,dyz,dxz,dx2−y2,dz2d_{xy}, d_{yz}, d_{xz}, d_{x^2-y^2}, d_{z^2}) is singly occupied by 11 electron with parallel spins (↑\uparrow, ↑\uparrow, ↑\uparrow, ↑\uparrow, ↑\uparrow), yielding n=5n = 5 unpaired electrons. The theoretical spin-only magnetic moment is μs=5(5+2)μB=35μB≈5.92μB\mu_s = \sqrt{5(5 + 2)}\mu_B = \sqrt{35}\mu_B \approx 5.92\mu_B.

Steps

01

Determine the Electron Configuration of MnX2+\ce{Mn^2+}

  1. Neutral Atom (Mn\ce{Mn}, Z=25Z = 25):
    The ground-state electron configuration of neutral manganese is: Mn:[Ar] 3d54s2\ce{Mn}: [\ce{Ar}]\,3d^5 4s^2
  2. Ion Formation (MnX2+\ce{Mn^2+}):
    When first-row transition metals ionize, electrons are removed from the valence 4s4s subshell before the 3d3d subshell because the 4s4s electrons have a higher principal quantum number and are situated further from the nucleus on average.
    Removing two electrons leaves: MnX2+:[Ar] 3d5\ce{Mn^2+}: [\ce{Ar}]\,3d^5

Common Pitfall: Do not remove electrons from the 3d3d orbitals first (e.g., writing [Ar] 3d34s2[\ce{Ar}]\,3d^3 4s^2). Always empty the 4s4s orbital first during transition metal ionization.


02

Construct the High-Spin Octahedral Orbital Diagram

In an octahedral ligand field, the five degenerate 3d3d orbitals split into two energy levels:

  • A lower-energy triply degenerate set: t2gt_{2g} (dxy,dyz,dxzd_{xy}, d_{yz}, d_{xz})
  • A higher-energy doubly degenerate set: ege_g (dx2−y2,dz2d_{x^2-y^2}, d_{z^2})

Because HX2O\ce{H2O} is a weak-field ligand, the crystal field splitting energy (Δo\Delta_o) is less than the electron pairing energy (PP): Δo<P\Delta_o < P

Under Hund's rule, electrons will singly occupy all available degenerate and near-degenerate orbitals with parallel spins before any pairing occurs. Distributing the five 3d3d electrons yields a high-spin configuration of t2g3eg2t_{2g}^3 e_g^2:

text
    e_g:    [ ↑ ]  [ ↑ ]          (d_x^2-y^2, d_z^2)                         --- Δ_o ---
   t_2g:  [ ↑ ]  [ ↑ ]  [ ↑ ]     (d_xy, d_yz, d_xz)

Each of the five 3d3d orbitals contains one unpaired electron with parallel spins: n=5n = 5


03

Calculate the Theoretical Spin-Only Magnetic Moment

Using the spin-only formula: μs=n(n+2) μB\mu_s = \sqrt{n(n + 2)}\,\mu_B

Substitute n=5n = 5: μs=5(5+2) μB=5⋅7 μB=35 μB≈5.92 μB\mu_s = \sqrt{5(5 + 2)}\,\mu_B = \sqrt{5 \cdot 7}\,\mu_B = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B

The complex has 55 unpaired electrons, resulting in a theoretical spin-only magnetic moment of approximately 5.92 μB5.92\,\mu_B.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student removes electrons from the 3d subshell instead of the 4s subshell when forming Mn²⁺, resulting in an incorrect 4s² 3d³ configuration with n = 3 unpaired electrons.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mn:[Ar] 4s23d5  ⟹  MnX2+:[Ar] 4s23d3\ce{Mn}: [\ce{Ar}]\, 4s^2 3d^5 \implies \ce{Mn^2+}: [\ce{Ar}]\, 4s^2 3d^3

    Correct

    Mn:[Ar] 3d54s2  ⟹  MnX2+:[Ar] 3d5\ce{Mn}: [\ce{Ar}]\, 3d^5 4s^2 \implies \ce{Mn^2+}: [\ce{Ar}]\, 3d^5

    When transition metals ionize, electrons are removed first from the outermost valence shell (4s4s, where n=4n=4) rather than the inner 3d3d subshell (n=3n=3). Removing two electrons from neutral manganese leaves [Ar] 3d5[\ce{Ar}]\, 3d^5.

  2. Step 2

    High-spin octahedral \text{High-spin octahedral } 3d: t_{2g}^3 e_g^0 ; (t_{2g}: \uparrow, \uparrow, \uparrow;; e_g: empty\text{empty})

    Correct

    t_{2g}^3 e_g^2 ; (t_{2g}: \uparrow, \uparrow, \uparrow;; e_g: \uparrow, \uparrow)

    Your orbital filling logic was consistent with having only 3 dd-electrons, but MnX2+\ce{Mn^2+} actually has 5 dd-electrons. In a high-spin octahedral field, these 5 electrons occupy both the t2gt_{2g} and ege_g levels before pairing.

  3. Step 3

    n = 3  unpaired electrons\text{ unpaired electrons}

    Correct

    n = 5  unpaired electrons\text{ unpaired electrons}

    Because MnX2+\ce{Mn^2+} has five 3d3d electrons distributed singly across the five degenerate and split orbitals, there are n=5n = 5 unpaired electrons.

  4. Step 4

    μs=3(3+2)=15≈3.87 μB\mu_s = \sqrt{3(3+2)} = \sqrt{15} \approx 3.87\,\mu_B

    Correct

    μs=5(5+2)=35≈5.92 μB\mu_s = \sqrt{5(5+2)} = \sqrt{35} \approx 5.92\,\mu_B

    You evaluated the formula μs=n(n+2)\mu_s = \sqrt{n(n+2)} correctly for n=3n = 3, but substituting the correct value n=5n = 5 gives 35 μB≈5.92 μB\sqrt{35}\,\mu_B \approx 5.92\,\mu_B.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the ground-state electron configuration of neutral manganese.

You correctly used Hund's rule to keep electrons unpaired in the available orbitals.

You correctly applied the spin-only magnetic moment formula μs=n(n+2) μB\mu_s = \sqrt{n(n+2)}\,\mu_B.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Transition Metal Ionization Order

You removed two 3d3d electrons instead of the two 4s4s electrons when converting Mn\ce{Mn} to MnX2+\ce{Mn^2+}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the order of orbital filling (Aufbau principle) with the order of electron removal during ionization. Although 4s4s fills before 3d3d in neutral atoms, 4s4s electrons have a higher principal quantum number (n=4n=4) and are lost first upon ionization.

REASONING PATH
Your ACEpath teacher’s suggested approach
Transition Metal Ionization Rule
  • For first-row transition metals, electrons are always removed from the outermost 4s4s orbital before any 3d3d electrons are removed.

  • Always empty the 4s4s subshell completely (4s04s^0) before deducting electrons from the 3d3d subshell.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the ionization of manganese: Mn([Ar] 3d54s2)→MnX2+([Ar] 3d5)+2e−\ce{Mn} ([\ce{Ar}]\, 3d^5 4s^2) \to \ce{Mn^2+} ([\ce{Ar}]\, 3d^5) + 2e^-.

  2. Populate the high-spin octahedral crystal field splitting levels (t2gt_{2g} and ege_g) with 5 electrons: t2g3eg2t_{2g}^3 e_g^2.

  3. Count the unpaired electrons across all orbitals: n=5n = 5.

  4. Calculate the magnetic moment: μs=5(5+2) μB=35 μB≈5.92 μB\mu_s = \sqrt{5(5+2)}\,\mu_B = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B.

Final answer

μs=35 μB≈5.92 μB\mu_s = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing electron configurations for common 3d3d transition metal cations (e.g., FeX2+\ce{Fe^2+}, FeX3+\ce{Fe^3+}, CoX2+\ce{Co^2+}, NiX2+\ce{Ni^2+}).

  • Double-check that every first-row transition metal cation with an oxidation state of +2+2 or higher has an empty 4s4s subshell (4s04s^0).

OverviewACEpath Teacher's Diagnosis

02 The student treats the complex as low-spin instead of high-spin, pairing electrons in the lower t₂g orbitals to obtain n = 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Mn2+:[Ar] 3d5\text{Mn}^{2+}: [\text{Ar}]\,3d^5

  2. Step 2

    Low-spin pairing in t2gt_{2g}: t2g5eg0t_{2g}^5 e_g^0 (t2g:↑↓,↑↓,↑t_{2g}: \uparrow\downarrow, \uparrow\downarrow, \uparrow; eg:emptye_g: \text{empty})

    Correct

    t2g3eg2t_{2g}^3 e_g^2 (t2g:↑,↑,↑t_{2g}: \uparrow, \uparrow, \uparrow; eg:↑,↑e_g: \uparrow, \uparrow)

    The problem states that H2O\text{H}_2\text{O} is a weak-field ligand producing a high-spin complex where Δo<P\Delta_o < P. By Hund's rule, electrons singly occupy all five degenerate and near-degenerate orbitals (t2gt_{2g} and ege_g) with parallel spins before any pairing occurs.

  3. Step 3

    n=1 unpaired electronn = 1\text{ unpaired electron}

    Correct

    n=5 unpaired electronsn = 5\text{ unpaired electrons}

    Because all five orbitals are singly occupied in the high-spin t2g3eg2t_{2g}^3 e_g^2 configuration, there are n=5n = 5 unpaired electrons rather than 11.

  4. Step 4

    μs=1(1+2)=3≈1.73 μB\mu_s = \sqrt{1(1+2)} = \sqrt{3} \approx 1.73\,\mu_B

    Correct

    μs=5(5+2)=35≈5.92 μB\mu_s = \sqrt{5(5+2)} = \sqrt{35} \approx 5.92\,\mu_B

    You correctly applied the formula μs=n(n+2) μB\mu_s = \sqrt{n(n+2)}\,\mu_B, but the calculation was affected by carrying forward n=1n = 1 instead of n=5n = 5.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote the ground-state electron configuration of the Mn2+\text{Mn}^{2+} ion as [Ar] 3d5[\text{Ar}]\,3d^5.

You accurately recalled and evaluated the spin-only magnetic moment formula μs=n(n+2) μB\mu_s = \sqrt{n(n+2)}\,\mu_B for your value of nn.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
High-spin vs. low-spin field misassignment

You configured the dd electrons for a strong-field (low-spin) environment even though the problem specified a weak-field, high-spin complex.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the electron-filling rules for weak-field versus strong-field ligands in octahedral crystal field splitting, overlooking that weak-field ligands have a small splitting energy (Δo<P\Delta_o < P) which favors maximum spin multiplicity across both t2gt_{2g} and ege_g levels.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the ligand field strength
  • Weak-field ligands (such as H2O\text{H}_2\text{O}, halide ions) cause small crystal field splitting (Δo<P\Delta_o < P), resulting in high-spin configurations. Strong-field ligands (such as CN−\text{CN}^-, CO\text{CO}) cause large splitting (Δo>P\Delta_o > P), resulting in low-spin configurations.

  • Inspect the ligand identity and problem prompt; if weak-field or high-spin is indicated, distribute electrons singly across both t2gt_{2g} and ege_g before pairing.

Apply Hund's rule across split levels
  • In high-spin octahedral d4d^4 through d7d^7 complexes, electrons occupy the higher-energy ege_g set before pairing up in the lower-energy t2gt_{2g} set.

  • For d5d^5 high-spin, place 3 electrons with parallel spins in t2gt_{2g} and 2 electrons with parallel spins in ege_g to give t2g3eg2t_{2g}^3 e_g^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the high-spin condition: since Δo<P\Delta_o < P, all 5 dd orbitals are singly occupied before any electron pairing occurs, yielding the configuration t2g3eg2t_{2g}^3 e_g^2.

  2. Count the unpaired electrons: each of the five orbitals holds one electron with parallel spin, giving n=5n = 5.

  3. Substitute n=5n = 5 into the spin-only magnetic moment equation: μs=5(5+2) μB=35 μB≈5.92 μB\mu_s = \sqrt{5(5 + 2)}\,\mu_B = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B.

Final answer

High-spin orbital configuration is t2g3eg2t_{2g}^3 e_g^2 with n=5n = 5 unpaired electrons, giving μs=35 μB≈5.92 μB\mu_s = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the spectrochemical series to quickly distinguish weak-field ligands (high-spin) from strong-field ligands (low-spin).

  • Practice drawing octahedral splitting diagrams side-by-side for d4d^4 through d7d^7 configurations in both high-spin and low-spin regimes.

  • Verify calculated magnetic moments against typical experimental benchmarks: d5d^5 high-spin complexes always exhibit μs≈5.9 μB\mu_s \approx 5.9\,\mu_B.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the spin-only formula as √(n(n + 1)) instead of √(n(n + 2)), leading to an incorrect value of μ_s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    MnX2+:[Ar] 3d5\ce{Mn^2+}: [\ce{Ar}]\,3d^5

  2. Step 2

    High-spin splitting:t2g3eg2(t2g:↑,↑,↑; eg:↑,↑)\text{High-spin splitting}: t_{2g}^3 e_g^2 \quad (t_{2g}: \uparrow, \uparrow, \uparrow;\, e_g: \uparrow, \uparrow)

  3. Step 3

    n=5 unpaired electronsn = 5\text{ unpaired electrons}

  4. Step 4

    μs=n(n+1)=5(5+1)=30≈5.48 μB\mu_s = \sqrt{n(n+1)} = \sqrt{5(5+1)} = \sqrt{30} \approx 5.48\,\mu_B

    Correct

    μs=n(n+2) μB=5(5+2) μB=35 μB≈5.92 μB\mu_s = \sqrt{n(n+2)}\,\mu_B = \sqrt{5(5+2)}\,\mu_B = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B

    You used the term (n+1)(n + 1) inside the radical instead of the correct spin-only factor (n+2)(n + 2).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced the [Ar] 3d5[\ce{Ar}]\,3d^5 electron configuration for MnX2+\ce{Mn^2+}.

You accurately distributed the five electrons across the high-spin octahedral t2gt_{2g} and ege_g orbitals according to Hund's rule.

You correctly counted n=5n = 5 unpaired electrons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula recall error

You wrote (n+1)(n + 1) rather than (n+2)(n + 2) under the radical in the spin-only formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total spin angular momentum quantum formula S(S+1)ℏ\sqrt{S(S+1)}\hbar with the spin-only magnetic moment expression in terms of unpaired electrons nn. Because total spin is S=n2S = \frac{n}{2}, substituting into gS(S+1)g\sqrt{S(S+1)} with g≈2g \approx 2 yields 2n2(n2+1)=n(n+2)2\sqrt{\frac{n}{2}\left(\frac{n}{2} + 1\right)} = \sqrt{n(n+2)}, giving an inner factor of (n+2)(n + 2), not (n+1)(n + 1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Spin-Only Formula Derivation
  • In terms of total spin SS, μs=2S(S+1) μB\mu_s = 2\sqrt{S(S+1)}\,\mu_B. Since each unpaired electron contributes s=12s = \frac{1}{2}, S=n2S = \frac{n}{2}.

  • Substitute S=n2S = \frac{n}{2} to get μs=2n2(n+22) μB=n(n+2) μB\mu_s = 2\sqrt{\frac{n}{2}\left(\frac{n+2}{2}\right)}\,\mu_B = \sqrt{n(n+2)}\,\mu_B.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the spin-only magnetic moment formula: μs=n(n+2) μB\mu_s = \sqrt{n(n+2)}\,\mu_B.

  2. Substitute n=5n = 5: μs=5(5+2) μB=5×7 μB=35 μB\mu_s = \sqrt{5(5+2)}\,\mu_B = \sqrt{5 \times 7}\,\mu_B = \sqrt{35}\,\mu_B.

  3. Evaluate the numerical square root: 35≈5.92 μB\sqrt{35} \approx 5.92\,\mu_B.

Final answer

μs=35 μB≈5.92 μB\mu_s = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check the formula given in the problem statement before calculating.

  • Remember that the radical in terms of nn is always n(n+2)\sqrt{n(n+2)}, which gives values close to n+0.9n + 0.9 Bohr magnetons for n≥1n \ge 1.

Lock it in

Similar question

01

Determine the ground-state electron configuration of the cobalt(II) ion, CoX2+\ce{Co^2+} (Z=27Z = 27). How many 3d3d electrons does it possess?

Answer

Neutral cobalt is [Ar] 3d74s2[\ce{Ar}]\, 3d^7 4s^2. Ionization to CoX2+\ce{Co^2+} removes the two 4s4s electrons first, giving [Ar] 3d7[\ce{Ar}]\, 3d^7 (77 dd-electrons).

02

A high-spin octahedral complex of iron(III), [FeFX6]3−[\ce{FeF6}]^{3-} (Z=26Z = 26), contains weak-field fluoride ligands. Determine the electron configuration of FeX3+\ce{Fe^3+}, its high-spin dd-orbital occupancy (t2gt_{2g} and ege_g), and calculate its theoretical spin-only magnetic moment μs\mu_s.

Answer

Neutral Fe\ce{Fe} is [Ar] 3d64s2[\ce{Ar}]\, 3d^6 4s^2. Ionizing to FeX3+\ce{Fe^3+} removes two 4s4s electrons and one 3d3d electron, giving [Ar] 3d5[\ce{Ar}]\, 3d^5. In a high-spin octahedral field, the 5 electrons occupy t2g3eg2t_{2g}^3 e_g^2, giving n=5n = 5 unpaired electrons. Therefore, μs=5(5+2) μB=35 μB≈5.92 μB\mu_s = \sqrt{5(5+2)}\,\mu_B = \sqrt{35}\,\mu_B \approx 5.92\,\mu_B.

03

The complex [Ni(HX2O)6]2+[\ce{Ni}(\ce{H2O})6]^2+ contains the central ion NiX2+\ce{Ni^2+} (Z=28Z = 28). Write the electron configuration of NiX2+\ce{Ni^2+}, construct the octahedral orbital diagram (t2gt_{2g} and ege_g), identify the number of unpaired electrons nn, and compute μs\mu_s in Bohr magnetons.

Answer

Neutral Ni\ce{Ni} is [Ar] 3d84s2[\ce{Ar}]\, 3d^8 4s^2. Removing the two 4s4s electrons gives NiX2+:[Ar] 3d8\ce{Ni^2+}: [\ce{Ar}]\, 3d^8. In an octahedral field, the 8 electrons fill as t2g6eg2t_{2g}^6 e_g^2. The two electrons in the ege_g orbitals remain unpaired by Hund's rule, so n=2n = 2. The magnetic moment is μs=2(2+2) μB=8 μB≈2.83 μB\mu_s = \sqrt{2(2+2)}\,\mu_B = \sqrt{8}\,\mu_B \approx 2.83\,\mu_B.

Loading workspace…