Resources
A solution contains a mixture of and . A student attempts fractional precipitation by dropwise addition of a dilute sodium chloride solution, , without significantly altering the total volume. Given and at : (a) Determine which cation precipitates first as solid chloride. (b) Calculate the molar concentration of the first-precipitating cation remaining in solution at the exact moment the second cation begins to precipitate.
Answer and steps
Final answer
(a) precipitates first (requires , compared to for ); (b)
Steps
Part (a): Determining Which Cation Precipitates First
Precipitation of a sparingly soluble salt occurs when the reaction quotient, , equals or exceeds the solubility product constant, . Because the precipitating agent, , is added gradually, the cation that requires the lower concentration of chloride ions to initiate precipitation will precipitate first.
- Calculate the minimum required to begin precipitating : The dissolution equilibrium is: The solubility product expression is: Rearranging to solve for the threshold :
- Calculate the minimum required to begin precipitating : The dissolution equilibrium is: The solubility product expression is: Rearranging to solve for the threshold :
- Comparison: Because , the threshold for is reached much sooner. Therefore, precipitates first.
Part (b): Concentration of Remaining at Onset of Precipitation
As is added, continues to precipitate while maintaining dynamic equilibrium in solution. The second salt, , begins to precipitate precisely when:
At this instant, the solution remains saturated with respect to . Substituting this chloride concentration back into the expression for :
Common Pitfall: Do not directly compare the values of to decide which salt precipitates first when the salts have different stoichiometries ( for versus for ). Always calculate the required precipitating ion concentration, , for each ion.
Typical errors
01 The student forgets to square the chloride ion concentration in the Ksp expression for PbCl₂, treating it as a 1:1 salt.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Lead(II) chloride dissociates as , so its solubility product expression is . You treated it as a salt by omitting the square on and forgetting to take the square root.
- Step 3Correct
Your logic of comparing the threshold chloride concentrations is sound, and your qualitative conclusion is correct, but the comparison relied on your incorrect value of for .
- Step 4
^{2+} [^-] = 8.5 10^{-4} [^+] = = = 2.1 10^{-7}
Correct[^+] = = 6.2 10^{-9}
Your equilibrium substitution method is completely correct, but substituting the uncorrected value instead of caused an inaccurate final concentration.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the cation requiring the lower precipitating ion concentration precipitates first.
You correctly solved for the minimum needed to precipitate .
You correctly applied the common-ion equilibrium expression to find the remaining at the onset of the second precipitation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated as a electrolyte rather than squaring the chloride concentration in the formula.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the stoichiometric expression with non- salts where the balanced dissolution equation dictates powers in the law of mass action ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Write the Dissociation Equation First
For any salt , the solubility product expression is .
Always write out the balanced dissolution reaction before writing the expression so you can match each exponent directly to its stoichiometric coefficient.
- Isolating Common Precipitating Ion
When solving for in , the concentration is .
Verify whether your expression requires taking an -th root before comparing threshold values across salts of different stoichiometries.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the dissolution equilibrium: , giving .
Solve for the threshold chloride concentration: .
Compare thresholds: , confirming precipitates first.
Substitute into the equilibrium: .
(a) precipitates first; (b)
02 The student directly compares the numerical values of the Ksp constants without calculating the required ion concentrations.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Because , is less soluble and precipitates first.
Correct; . Because , precipitates first.
You cannot directly compare values to determine precipitation order when the salts have different stoichiometries ( for versus for ). You must calculate the precipitating ion concentration, , required to reach saturation for each cation.
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the expression for and solved for the chloride ion concentration needed to start precipitation.
You applied the common-ion equilibrium correctly to calculate the residual remaining at the onset of precipitation.
You identified that precipitates first, reaching the correct qualitative outcome.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisComparing values directly is only valid when salts have identical cation-to-anion ratios. For salts with different formulas ( vs. ), the units and functional dependencies on ion concentration differ, so you must always calculate and compare the required concentration of the common precipitating ion.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Salt Stoichiometry
Never compare raw values unless both precipitates share identical chemical formulas and stoichiometric ratios (e.g., both or both ).
Look at the formulas and . Because one has a ratio and the other a ratio, solve for the precipitating ion concentration independently for each salt.
- Compare Precipitating Thresholds
The salt requiring the lower concentration of the titrant/precipitating ion precipitates first.
Calculate and and compare the resulting values.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the minimum required to precipitate : .
Find the minimum required to precipitate : .
Compare the thresholds: , so reaches saturation first and precipitates first.
(a) precipitates first because it requires a much lower () than (); (b) .
03 The student squares [Ag⁺] instead of keeping it linear when rearranging the Ksp expression for Ag⁺ remaining at the second precipitation threshold.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
For : For : precipitates first because it requires a lower .
- Step 2
Second precipitation begins at
CorrectFor silver chloride, , the solubility product expression is . Both stoichiometric coefficients are , so must be linear rather than squared.
- Step 3Correct
Because you squared in the previous step, taking the square root propagated the error and produced an incorrect final concentration.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the threshold chloride concentration required to precipitate and .
You correctly determined that precipitates first because it has the lower threshold.
You correctly identified as the onset threshold for the second precipitation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally squared when rearranging the expression for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the stoichiometry of with the stoichiometry of , leading to an unneeded exponent and square root operation on .
REASONING PATH
Your ACEpath teacher’s suggested approach- Verify $K_{sp}$ Exponents
For a salt , the solubility product expression is .
Write the balanced dissociation equation and confirm that each ion's exponent matches its own stoichiometric coefficient.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the correct expression for silver chloride: .
Rearrange linearly for : .
Substitute : .
Lock it in
What is the correct expression for a salt of type , such as or ?
. The coefficient 2 from becomes an exponent of 2 in the mass-action expression.
Similar question
A solution contains and . Sodium fluoride, , is added dropwise. Given and , determine which cation precipitates first and calculate the threshold required for each.
Answer
precipitates first. For : . For : . Because , precipitates first.
In a mixture of and , phosphate ions () are slowly added. Given and , calculate the minimum required to begin precipitation of each compound.
Answer
For : . For : .
A solution has and . Dilute is added gradually. Given and : (a) Which cation precipitates first? (b) What is remaining in solution when just begins to precipitate?
Answer
(a) precipitates first because its threshold is , whereas requires . (b) When starts to precipitate at , the remaining iron concentration is .