Resources

An environmental water quality laboratory receives a 500.0 mL500.0\text{ mL} clear surface water sample containing dissolved calcium bicarbonate, Ca(HCO3)2\text{Ca(HCO}_3)_2, at a concentration of 185 mg/L185\text{ mg/L}, along with suspended micro-particulate silica (SiO2\text{SiO}_2) at a concentration of 45.0 ppm45.0\text{ ppm} (where 1.00 ppm=1.00 mg/L1.00\text{ ppm} = 1.00\text{ mg/L} in dilute aqueous solution). (a) Classify the untreated surface water sample as an element, a compound, a homogeneous mixture, or a heterogeneous mixture. (b) If the sample is passed through a 0.22 μm0.22\text{ }\mu\text{m} membrane filter that removes 100%100\% of the suspended SiO2\text{SiO}_2, classify the resulting filtrate. (c) Calculate the total mass in grams of pure Ca(HCO3)2\text{Ca(HCO}_3)_2 dissolved in the 500.0 mL500.0\text{ mL} sample, and determine whether this solute is an element or a compound.

Answer and steps

Final answer

(a) The untreated surface water is a heterogeneous mixture (containing insoluble suspended solid SiO2\text{SiO}_2 particles dispersed in water). (b) The filtrate is a homogeneous mixture (a true aqueous solution of dissolved calcium and bicarbonate ions in water). (c) Total mass of dissolved Ca(HCO3)2=185 mg/L×0.5000 L=92.5 mg=0.0925 g\text{Ca(HCO}_3)_2 = 185\text{ mg/L} \times 0.5000\text{ L} = 92.5\text{ mg} = 0.0925\text{ g}; Ca(HCO3)2\text{Ca(HCO}_3)_2 is a compound composed of three different elements (calcium, carbon, hydrogen, and oxygen) chemically combined in fixed stoichiometric proportions.

Steps

Part (a): Classifying the Untreated Water Sample

  1. Definitions of Matter Classes:

    • A pure substance (element or compound) has a fixed, uniform chemical composition throughout.
    • A mixture consists of two or more distinct substances physically combined rather than chemically bonded.
    • A homogeneous mixture (solution) possesses a uniform composition and a single physical phase down to the molecular level.
    • A heterogeneous mixture consists of physically distinct phases with non-uniform composition and visible boundaries or suspended particles.
  2. Analysis of the Untreated Sample:

    • The sample contains liquid water, dissolved ions from Ca(HCOX3)X2\ce{Ca(HCO3)2}, and solid suspended micro-particles of SiOX2\ce{SiO2}.
    • Because the solid silica particles (SiOX2\ce{SiO2}) are insoluble and suspended rather than dissolved, the sample has distinct phases (solid particles dispersed in a liquid phase).
    • Therefore, the untreated surface water is a heterogeneous mixture.

Part (b): Classifying the Filtrate

  1. Effect of Filtration:

    • Passing the sample through a 0.22 μm0.22\text{ }\mu\text{m} membrane filter removes 100%100\% of the insoluble suspended micro-particulate SiOX2\ce{SiO2}.
    • The resulting liquid (the filtrate) contains only water (HX2O\ce{H2O}) and completely dissolved calcium and bicarbonate ions (CaX2+\ce{Ca^2+} and HCOX3X−\ce{HCO3-}).
  2. Classification:

    • Because the dissolved ions are distributed uniformly at the molecular/ionic scale, the liquid exists entirely in a single phase with uniform properties throughout.
    • A multi-component system existing as a single uniform phase is a solution, which is a homogeneous mixture.

Part (c): Calculating Solute Mass and Classifying the Solute

  1. Volume Conversion: V=500.0 mL×1 L1000 mL=0.5000 LV = 500.0\text{ mL} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.5000\text{ L}
  2. Mass Calculation: Mass of Ca(HCOX3)X2=Concentration×V\text{Mass of }\ce{Ca(HCO3)2} = \text{Concentration} \times V Mass=185 mg/L×0.5000 L=92.5 mg\text{Mass} = 185\text{ mg/L} \times 0.5000\text{ L} = 92.5\text{ mg}
  3. Convert Mass to Grams: Mass in grams=92.5 mg×1 g1000 mg=0.0925 g\text{Mass in grams} = 92.5\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 0.0925\text{ g}
  4. Classifying the Solute (Ca(HCOX3)X2\ce{Ca(HCO3)2}):

    • An element consists of only one type of atom and cannot be broken down chemically into simpler substances.
    • A compound consists of two or more different elements chemically combined in fixed stoichiometric proportions.
    • Pure calcium bicarbonate, Ca(HCOX3)X2\ce{Ca(HCO3)2}, contains four distinct chemical elements: calcium (Ca\ce{Ca}), hydrogen (H\ce{H}), carbon (C\ce{C}), and oxygen (O\ce{O}), chemically bonded in a fixed ratio of 1:2:2:61 : 2 : 2 : 6.
    • Therefore, Ca(HCOX3)X2\ce{Ca(HCO3)2} is a compound.

Common Pitfall: Do not confuse dissolved solutes with suspended solids. Dissolved particles exist as individual hydrated ions or molecules (≈0.1 to 1 nm\approx 0.1\text{ to }1\text{ nm}) that pass easily through membrane filters and do not settle, whereas suspended particles (>100 nm> 100\text{ nm}) create turbidity, scatter light, and can be mechanically filtered out.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the untreated water as a homogeneous mixture by focusing on its clear appearance and overlooking that suspended particles create a separate phase.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Homogeneous mixture \n The sample is a clear liquid mixture of dissolved substances in water.

    Correct

    Heterogeneous mixture

    Even though the sample appears clear to the eye, it contains suspended solid micro-particles of SiO2\text{SiO}_2. Suspended particles represent a distinct solid phase dispersed within the liquid phase, which makes the untreated water a heterogeneous mixture rather than a solution.

  2. Step 2

    Homogeneous mixture

  3. Step 3

    V=500.0 mL=0.5000 L  ⟹  m=185 mg/L×0.5000 L=92.5 mg=0.0925 g  ⟹  CompoundV = 500.0\text{ mL} = 0.5000\text{ L} \implies m = 185\text{ mg/L} \times 0.5000\text{ L} = 92.5\text{ mg} = 0.0925\text{ g} \implies \text{Compound}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the filtered sample forms a single-phase homogeneous solution.

You accurately converted units and calculated the dissolved mass of Ca(HCO3)2\text{Ca(HCO}_3)_2 as 0.0925 g0.0925\text{ g}.

You correctly classified pure calcium bicarbonate as a compound composed of chemically bonded elements.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing suspended solids with dissolved solutes based on macroscopic appearance

No slip was detected; your numerical arithmetic and unit conversions were completely correct.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the macroscopic descriptor 'clear' to assume all components were dissolved solutes, overlooking that suspended micro-particles constitute a separate insoluble phase (a suspension) that makes the system heterogeneous.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Phase Boundaries vs. Dissolved Species
  • A homogeneous mixture must exist as a single uniform phase down to the molecular or ionic level. Insoluble or suspended particles form a separate phase.

  • Look specifically for keywords like 'suspended', 'particulate', 'precipitate', or 'colloid' in the problem statement, which indicate a multi-phase heterogeneous mixture regardless of macroscopic clarity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify all components present in the untreated water: liquid water, dissolved Ca2+\text{Ca}^{2+} and HCO3−\text{HCO}_3^- ions, and suspended solid SiO2\text{SiO}_2 particles.

  2. Recognize that suspended solid particles are not dissolved and therefore constitute a distinct solid phase dispersed in the liquid.

  3. Conclude that a mixture containing more than one physical phase is a heterogeneous mixture.

Final answer

(a) Heterogeneous mixture; (b) Homogeneous mixture; (c) 0.0925 g0.0925\text{ g}, compound

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between true solutions (single phase, dissolved ions/molecules) and suspensions/colloids (dispersed solid phases).

  • Practice scanning problem descriptions for physical state descriptors like 'suspended' or 'insoluble' before classifying mixtures.

OverviewACEpath Teacher's Diagnosis

02 The student confuses a homogeneous mixture (solution) with a pure chemical compound because the filtered liquid appears uniform throughout.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Heterogeneous mixture ⟹ Suspended silica particles make it a two-phase mixture

  2. Step 2

    Element Compound

    Correct

    Homogeneous mixture

    The filtrate contains dissolved Ca(HCO3)2\text{Ca(HCO}_3)_2 uniformly distributed in liquid H2O\text{H}_2\text{O}. Because it contains two distinct chemical substances physically combined into a single uniform phase, it is a solution (homogeneous mixture), not a single pure chemical compound.

  3. Step 3

    V = 500.0 mL\text{ mL} = 0.5000 L\text{ L}   ⟹  \implies m = 185 mg/L\text{ mg/L} ×\times 0.5000 L\text{ L} = 92.5 mg\text{ mg} = 0.0925 g\text{ g}

  4. Step 4

    Compound

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the untreated water sample as a heterogeneous mixture due to the presence of suspended solid particles.

You converted the volume and concentration accurately to calculate the mass of dissolved solute in grams.

You correctly classified pure calcium bicarbonate as a chemical compound.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing a homogeneous mixture with a pure compound

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a clear, uniform liquid containing dissolved ions and solvent as a single pure chemical substance rather than recognizing it as a physical solution (homogeneous mixture) composed of multiple distinct compounds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Pure Substance vs. Solution
  • A pure compound has a single fixed chemical formula (e.g., pure H2O\text{H}_2\text{O} or pure NaCl\text{NaCl}), whereas a homogeneous mixture (solution) consists of two or more distinct substances physically mixed uniformly in a single phase.

  • Ask yourself whether the clear liquid can be separated by physical means such as evaporation; if water evaporates to leave dissolved solid behind, it is a homogeneous mixture.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the components present in the filtrate after removing suspended SiO2\text{SiO}_2: liquid water (H2O\text{H}_2\text{O}) and dissolved calcium bicarbonate (Ca2+\text{Ca}^{2+} and HCO3−\text{HCO}_3^- ions).

  2. Check whether these substances are chemically bonded into a single new substance or physically mixed: they are physically mixed, with water molecules surrounding hydrated ions.

  3. Determine the phase uniformity: the dissolved ions are distributed uniformly at the molecular scale, forming a single liquid phase.

  4. Conclude that a uniform physical combination of two or more substances is a homogeneous mixture (solution).

Final answer

Homogeneous mixture

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between a pure compound and an aqueous solution.

  • Practice identifying whether a uniform material can be separated by physical processes like distillation or evaporation.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the volume from milliliters to liters or milligrams to grams, resulting in an answer that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    a) Heterogeneous mixture Contains suspended solid particles and dissolved solute

  2. Step 2

    b) Homogeneous mixture

  3. Step 3

    c) m=185 mg/L×0.5000 L=92.5 gm = 185\text{ mg/L} \times 0.5000\text{ L} = 92.5\text{ g}

    Correct

    m=185 mg/L×0.5000 L=92.5 mg=0.0925 gm = 185\text{ mg/L} \times 0.5000\text{ L} = 92.5\text{ mg} = 0.0925\text{ g}

    Multiplying concentration in mg/L\text{mg/L} by volume in L\text{L} yields mass in milligrams (mg\text{mg}), not grams (g\text{g}). You need to divide by 1000 mg/g1000\text{ mg/g} to convert 92.5 mg92.5\text{ mg} to 0.0925 g0.0925\text{ g}.

  4. Step 4

    d) Compound

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between heterogeneous mixtures, homogeneous mixtures, and chemical compounds.

You correctly converted the volume of the solution from 500.0 mL500.0\text{ mL} to 0.5000 L0.5000\text{ L}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion from milligrams to grams

You carried the numerical value 92.592.5 straight into grams instead of keeping the unit in milligrams and dividing by 10001000.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the unit attached to concentration (mg/L\text{mg/L}) led to treating the calculated mass product directly as grams.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track intermediate units explicitly
  • (mg/L)×L=mg(\text{mg/L}) \times \text{L} = \text{mg}, not g\text{g}.

  • Always write down the units at each step: 185 mg/L×0.5000 L=92.5 mg185\text{ mg/L} \times 0.5000\text{ L} = 92.5\text{ mg}, then convert: 92.5 mg×1 g1000 mg=0.0925 g92.5\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 0.0925\text{ g}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply concentration by volume: m=185 mg/L×0.5000 L=92.5 mgm = 185\text{ mg/L} \times 0.5000\text{ L} = 92.5\text{ mg}.

  2. Convert milligrams to grams: 92.5 mg×1 g1000 mg=0.0925 g92.5\text{ mg} \times \frac{1\text{ g}}{1000\text{ mg}} = 0.0925\text{ g}.

Final answer

0.0925 g0.0925\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include units in every step of dimensional analysis to ensure the final unit matches what the question asks.

  • Practice metric prefix conversions between milligrams, grams, and kilograms.

Lock it in

Similar question

01

A laboratory preparation consists of 2.5 g2.5\text{ g} of table sugar (C12H22O11\text{C}_{12}\text{H}_{22}\text{O}_{11}) thoroughly dissolved in 100.0 mL100.0\text{ mL} of pure water at 20∘C20^\circ\text{C} with no undissolved crystals remaining. (a) Classify this prepared liquid. (b) Classify pure sucrose itself as an element, compound, or mixture.

Answer

(a) Homogeneous mixture (a single-phase aqueous solution with uniform composition throughout). (b) Compound (sucrose consists of carbon, hydrogen, and oxygen chemically bonded in a fixed 12:22:1112:22:11 atomic ratio).

02

An unopened bottle of sparkling mineral water contains dissolved carbon dioxide (CO2\text{CO}_2), dissolved mineral salts, and liquid water under high pressure with no visible gas bubbles. When the cap is unscrewed, effervescence occurs and gas bubbles disperse throughout the liquid. Classify the system: (a) before opening, and (b) immediately after opening while bubbling.

Answer

(a) Before opening: Homogeneous mixture (all solutes are completely dissolved in a single liquid phase). (b) After opening: Heterogeneous mixture (a two-phase system consisting of gaseous CO2\text{CO}_2 bubbles dispersed throughout the aqueous liquid phase).

03

A 250.0 mL250.0\text{ mL} wastewater sample contains dissolved zinc sulfate at a concentration of 320.0 mg/L320.0\text{ mg/L} and an insoluble flocculant precipitate of Fe(OH)3\text{Fe(OH)}_3. (a) Classify the raw wastewater. (b) Calculate the total mass in grams of pure zinc sulfate dissolved in the sample. (c) Classify the residue left behind on the filter paper after gravity filtration.

Answer

(a) Heterogeneous mixture (contains an insoluble solid precipitate dispersed in an aqueous solution). (b) Mass=320.0 mg/L×0.2500 L=80.00 mg=0.08000 g\text{Mass} = 320.0\text{ mg/L} \times 0.2500\text{ L} = 80.00\text{ mg} = 0.08000\text{ g} of zinc sulfate. (c) The residue, Fe(OH)3\text{Fe(OH)}_3, is an insoluble solid compound consisting of iron, oxygen, and hydrogen atoms chemically bonded in a fixed stoichiometric ratio.

Loading workspace…