Resources

A standard laboratory stock solution contains copper(II) sulfate (CuSO4\text{CuSO}_4, molar mass =159.61 g/mol= 159.61\text{ g/mol}) at a concentration of 0.650 M0.650\text{ M} and has a density of 1.095 g/mL1.095\text{ g/mL}. Rather than finding the molarity, determine the mass percent (w/w%\text{w/w}\%) of CuSO4\text{CuSO}_4 in this solution.

Answer and steps

Final answer

9.47%9.47\%

Steps

01

Choose a basis volume

To find the mass percent (w/w%\text{w/w}\%) of copper(II) sulfate (CuSOX4\ce{CuSO4}) from molarity and solution density, we can assume a convenient volume of solution, find the mass of both the solute and the entire solution, and then compute the percentage.

Assume exactly 1.000 L1.000\text{ L} (1000 mL1000\text{ mL}) of the solution:

  • A molarity of 0.650 M0.650\text{ M} means there are 0.650 mol0.650\text{ mol} of CuSOX4\ce{CuSO4} per liter: Moles of CuSOX4=0.650 mol\text{Moles of }\ce{CuSO4} = 0.650\text{ mol}
02

Calculate the mass of the solute (CuSOX4\ce{CuSO4})

Multiply the moles of solute by its molar mass: Mass of CuSOX4=moles×molar mass\text{Mass of }\ce{CuSO4} = \text{moles} \times \text{molar mass} Mass of CuSOX4=0.650 mol×159.61 g/mol=103.75 g\text{Mass of }\ce{CuSO4} = 0.650\text{ mol} \times 159.61\text{ g/mol} = 103.75\text{ g}

03

Calculate the total mass of the solution

Using the density of the solution (ρ=1.095 g/mL\rho = 1.095\text{ g/mL}) and the assumed volume (1000 mL1000\text{ mL}): Mass of solution=volume×density\text{Mass of solution} = \text{volume} \times \text{density} Mass of solution=1000 mL×1.095 g/mL=1095 g\text{Mass of solution} = 1000\text{ mL} \times 1.095\text{ g/mL} = 1095\text{ g}

Common Pitfall: Do not confuse the mass of the solution with the mass of the solvent (water). Mass percent compares the solute to the total solution mass, which is obtained directly from the total volume and solution density.

04

Calculate the mass percent (w/w%\text{w/w}\%)

Apply the definition of mass percent: Mass percent=(mass of solutemass of solution)×100%\text{Mass percent} = \left(\frac{\text{mass of solute}}{\text{mass of solution}}\right) \times 100\% Mass percent=(103.75 g1095 g)×100%≈9.47%\text{Mass percent} = \left(\frac{103.75\text{ g}}{1095\text{ g}}\right) \times 100\% \approx 9.47\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the solution density and assumes 1 L of solution has a mass of 1000 g, leading to an overstated mass percent of 10.38%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Basis: 1 L solution=1000 mL  ⟹  Mass of solute=0.650 mol×159.61 g/mol=103.75 g\text{Basis: } 1\text{ L solution} = 1000\text{ mL} \implies \text{Mass of solute} = 0.650\text{ mol} \times 159.61\text{ g/mol} = 103.75\text{ g}

  2. Step 2

    Mass of solution=1000 g\text{Mass of solution} = 1000\text{ g}

    Correct

    Mass of solution=1000 mL×1.095 g/mL=1095 g\text{Mass of solution} = 1000\text{ mL} \times 1.095\text{ g/mL} = 1095\text{ g}

    You assumed a 1 mL:1 g1\text{ mL} : 1\text{ g} ratio for the solution, but the problem states the solution has a density of 1.095 g/mL1.095\text{ g/mL}. The total solution mass must be calculated using m=V×ρm = V \times \rho.

  3. Step 3

    Mass \text{Mass } % = (103.75 g1000 g)\left(\frac{103.75\text{ g}}{1000\text{ g}}\right) ×\times 100% = 10.38%

    Correct

    Mass \text{Mass } % = (103.75 g1095 g)\left(\frac{103.75\text{ g}}{1095\text{ g}}\right) ×\times 100% ≈\approx 9.47%

    Your percentage formula and arithmetic were carried out correctly, but the result was affected by the incorrect solution mass from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established a 1 L1\text{ L} (1000 mL1000\text{ mL}) volume basis.

You calculated the mass of dissolved CuSO4\text{CuSO}_4 solute accurately using its molar mass.

You set up the mass percent definition correctly as mass of solutemass of solution×100%\frac{\text{mass of solute}}{\text{mass of solution}} \times 100\%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Solution Density in Volume-to-Mass Conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the solution as having the density of pure water (1.00 g/mL1.00\text{ g/mL}) instead of converting the solution's volume to mass using the provided solution density (1.095 g/mL1.095\text{ g/mL}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Density Conversion Check
  • For any solution where density ρ≠1.00 g/mL\rho \neq 1.00\text{ g/mL}, mass of solution=volume×ρ\text{mass of solution} = \text{volume} \times \rho.

  • Always check the problem statement for a specified solution density before converting volume to mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total mass of the solution using its density: Mass of solution=1000 mL×1.095 g/mL=1095 g\text{Mass of solution} = 1000\text{ mL} \times 1.095\text{ g/mL} = 1095\text{ g}.

  2. Compute the mass percent: Mass %=(103.75 g1095 g)×100%≈9.47%\text{Mass } \% = \left(\frac{103.75\text{ g}}{1095\text{ g}}\right) \times 100\% \approx 9.47\%.

Final answer

9.47%9.47\%

NEXT STEPS
Final Takeaways from Your Teacher
  • When converting between molarity and mass percent, underline the solution density to ensure it is used to find the total solution mass.

  • Practice solving concentration conversion problems where solution densities are significantly different from 1.00 g/mL1.00\text{ g/mL}.

OverviewACEpath Teacher's Diagnosis

02 The student divides the solution volume by density instead of multiplying, underestimating the solution mass and calculating an erroneous mass percent of 11.36%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Basis: 1000 mL solution1000\text{ mL solution}   ⟹  \implies Mass of CuSOX4=0.650 mol×159.61 g/mol=103.75 g\text{Mass of }\ce{CuSO4} = 0.650\text{ mol} \times 159.61\text{ g/mol} = 103.75\text{ g}

  2. Step 2

    Mass of solution=1000 mL1.095 g/mL=913.24 g\text{Mass of solution} = \frac{1000\text{ mL}}{1.095\text{ g/mL}} = 913.24\text{ g}

    Correct

    Mass of solution=1000 mL×1.095 g/mL=1095 g\text{Mass of solution} = 1000\text{ mL} \times 1.095\text{ g/mL} = 1095\text{ g}

    Because density is ρ=mV\rho = \frac{m}{V}, the mass is calculated by multiplying volume by density (m=V×ρm = V \times \rho). Dividing volume by density yields units of mL2/g\text{mL}^2/\text{g} rather than grams.

  3. Step 3

    Mass %=(103.75 g913.24 g)×100%=11.36%\text{Mass \%} = \left(\frac{103.75\text{ g}}{913.24\text{ g}}\right) \times 100\% = 11.36\%

    Correct

    Mass %=(103.75 g1095 g)×100%=9.47%\text{Mass \%} = \left(\frac{103.75\text{ g}}{1095\text{ g}}\right) \times 100\% = 9.47\%

    You applied the correct mass percent formula msolutemsolution×100%\frac{m_{\text{solute}}}{m_{\text{solution}}} \times 100\%, but the result was incorrect because it used the inaccurate solution mass from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected a convenient basis volume of 1000 mL.

You correctly used the molarity and molar mass to find the mass of CuSO₄ solute.

You set up the mass percent formula correctly as solute mass divided by solution mass times 100%.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted density relationship

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the density relationship by dividing volume by density instead of multiplying volume by density to obtain mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Density Formula Check
  • Density=MassVolume  ⟹  Mass=Volume×Density\text{Density} = \frac{\text{Mass}}{\text{Volume}} \implies \text{Mass} = \text{Volume} \times \text{Density}

  • Always multiply the volume in mL by the density in g/mL so that the mL units cancel out and leave grams.

Sanity Check with Water Density
  • A solution denser than water (>1.00 g/mL> 1.00\text{ g/mL}) must have a mass in grams greater than its volume in mL.

  • Notice that 1000 mL of a solution with density 1.095 g/mL1.095\text{ g/mL} must weigh more than 1000 g, not 913 g.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Mass of solution=1000 mL×1.095 g/mL=1095 g\text{Mass of solution} = 1000\text{ mL} \times 1.095\text{ g/mL} = 1095\text{ g}

  2. Mass %=(103.75 g1095 g)×100%=9.47%\text{Mass \%} = \left(\frac{103.75\text{ g}}{1095\text{ g}}\right) \times 100\% = 9.47\%

Final answer

9.47%9.47\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Track dimensional units explicitly in calculations: mL×gmL=g\text{mL} \times \frac{\text{g}}{\text{mL}} = \text{g}.

  • Perform a physical sanity check whenever density exceeds 1.00 g/mL1.00\text{ g/mL} to confirm the solution mass is greater than its numerical volume in mL.

  • Practice converting between molarity and mass percent using aqueous solutions of known densities.

OverviewACEpath Teacher's Diagnosis

03 The student divides the mass of solute by the mass of solvent rather than the total solution mass, resulting in an incorrect ratio of 10.47%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Basis: 1000 mL solution  ⟹  Mass of CuSOX4=0.650 mol×159.61 g/mol=103.75 g\text{Basis: } 1000\text{ mL solution} \implies \text{Mass of }\ce{CuSO4} = 0.650\text{ mol} \times 159.61\text{ g/mol} = 103.75\text{ g}

  2. Step 2

    Mass of solution=1000 mL×1.095 g/mL=1095 g\text{Mass of solution} = 1000\text{ mL} \times 1.095\text{ g/mL} = 1095\text{ g}

  3. Step 3

    Mass of water=1095 g−103.75 g=991.25 g\text{Mass of water} = 1095\text{ g} - 103.75\text{ g} = 991.25\text{ g}

  4. Step 4

    Mass %=(103.75 g991.25 g)×100%=10.47%\text{Mass } \% = \left(\frac{103.75\text{ g}}{991.25\text{ g}}\right) \times 100\% = 10.47\%

    Correct

    Mass %=(103.75 g1095 g)×100%≈9.47%\text{Mass } \% = \left(\frac{103.75\text{ g}}{1095\text{ g}}\right) \times 100\% \approx 9.47\%

    You placed the mass of solvent (991.25 g991.25\text{ g}) in the denominator instead of the total mass of the solution (1095 g1095\text{ g}). By definition, mass percent compares the solute to the entire solution.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly chose a convenient basis volume of 1000 mL1000\text{ mL}.

You calculated the mass of CuSOX4\ce{CuSO4} solute accurately from molarity and molar mass.

You correctly applied density to determine the total mass of the solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing solvent mass with total solution mass in mass percent formula

No, this stems from a conceptual confusion between solution mass (used in mass percent) and solvent mass (used in molality).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined mass percent as solute-to-solvent ratio rather than solute-to-solution ratio. Mass percent (% w/w\%\text{ w/w}) represents the fraction of solute in the total mixture, so the denominator must always be the total mass of the solution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator in Concentration Expressions
  • Mass %=mass of solutemass of solution×100%\text{Mass \%} = \frac{\text{mass of solute}}{\text{mass of solution}} \times 100\%, whereas molality=moles of solutemass of solvent (kg)\text{molality} = \frac{\text{moles of solute}}{\text{mass of solvent (kg)}}.

  • Whenever you compute a percentage concentration (w/w%\text{w/w}\%, v/v%\text{v/v}\%), make sure the denominator is the total mixture (solution), never just the solvent.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the definition of mass percent: Mass %=(mass of solutemass of solution)×100%\text{Mass \%} = \left(\frac{\text{mass of solute}}{\text{mass of solution}}\right) \times 100\%.

  2. Substitute the mass of solute (103.75 g103.75\text{ g}) and the total mass of the solution (1095 g1095\text{ g}): Mass %=(103.75 g1095 g)×100%\text{Mass \%} = \left(\frac{103.75\text{ g}}{1095\text{ g}}\right) \times 100\%.

  3. Evaluate the quotient: 103.751095×100%≈9.47%\frac{103.75}{1095} \times 100\% \approx 9.47\%.

Final answer

9.47%9.47\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exact definitions of mass percent, molarity, and molality, paying special attention to what constitutes the denominator in each.

  • Practice keeping solution mass and solvent mass clearly separated in your scratchpad notes so you select the right value for each formula.

Lock it in

Similar question

01

An aqueous solution of sodium chloride (NaCl\text{NaCl}, molar mass =58.44 g/mol= 58.44\text{ g/mol}) has a concentration of 2.00 M2.00\text{ M} and a density of 1.08 g/mL1.08\text{ g/mL}. Calculate the mass percent (w/w%\text{w/w}\%) of NaCl\text{NaCl} in this solution.

Answer

10.8%10.8\%

Key steps:

  1. Basis: 1.00 L=1000 mL1.00\text{ L} = 1000\text{ mL}.
  2. Solute mass: 2.00 mol×58.44 g/mol=116.88 g2.00\text{ mol} \times 58.44\text{ g/mol} = 116.88\text{ g}.
  3. Solution mass: 1000 mL×1.08 g/mL=1080 g1000\text{ mL} \times 1.08\text{ g/mL} = 1080\text{ g}.
  4. Mass %=(116.88 g1080 g)×100%≈10.8%\text{Mass } \% = \left(\frac{116.88\text{ g}}{1080\text{ g}}\right) \times 100\% \approx 10.8\%.
02

Concentrated hydrochloric acid (HCl\text{HCl}, molar mass =36.46 g/mol= 36.46\text{ g/mol}) is 12.1 M12.1\text{ M} and has a density of 1.19 g/mL1.19\text{ g/mL}. What is the mass percent (w/w%\text{w/w}\%) of HCl\text{HCl}?

Answer

37.1%37.1\%

Key steps:

  1. Basis: 1.00 L=1000 mL1.00\text{ L} = 1000\text{ mL}.
  2. Solute mass: 12.1 mol×36.46 g/mol=441.17 g12.1\text{ mol} \times 36.46\text{ g/mol} = 441.17\text{ g}.
  3. Solution mass: 1000 mL×1.19 g/mL=1190 g1000\text{ mL} \times 1.19\text{ g/mL} = 1190\text{ g}.
  4. Mass %=(441.17 g1190 g)×100%≈37.1%\text{Mass } \% = \left(\frac{441.17\text{ g}}{1190\text{ g}}\right) \times 100\% \approx 37.1\%.
03

A concentrated sulfuric acid (H2SO4\text{H}_2\text{SO}_4, molar mass =98.08 g/mol= 98.08\text{ g/mol}) stock solution is 96.0% w/w96.0\%\text{ w/w} and has a density of 1.84 g/mL1.84\text{ g/mL}. Determine the molarity (M\text{M}) of this solution.

Answer

18.0 M18.0\text{ M}

Key steps:

  1. Basis: 1.00 L=1000 mL1.00\text{ L} = 1000\text{ mL}.
  2. Solution mass: 1000 mL×1.84 g/mL=1840 g1000\text{ mL} \times 1.84\text{ g/mL} = 1840\text{ g}.
  3. Solute mass: 1840 g×0.960=1766.4 g1840\text{ g} \times 0.960 = 1766.4\text{ g}.
  4. Moles of H2SO4\text{H}_2\text{SO}_4: 1766.4 g98.08 g/mol=18.01 mol\frac{1766.4\text{ g}}{98.08\text{ g/mol}} = 18.01\text{ mol}.
  5. Molarity=18.01 mol1.00 L=18.0 M\text{Molarity} = \frac{18.01\text{ mol}}{1.00\text{ L}} = 18.0\text{ M}.
Loading workspace…