Resources

Consider an extreme dilution scenario: A 1.00×10−8 M1.00\times 10^{-8}\text{ M} aqueous solution of hydrochloric acid (HCl\text{HCl}) is prepared at 25∘C25^\circ\text{C}. (a) Classify the property 'ability of HCl\text{HCl} to ionize completely in water' as a physical property or a chemical property, and classify the dissolution/ionization reaction HCl(g)+H2O(l)→H3O(aq)++Cl(aq)−\text{HCl}_{\text{(g)}} + \text{H}_2\text{O}_{\text{(l)}} \rightarrow \text{H}_3\text{O}_{\text{(aq)}}^+ + \text{Cl}_{\text{(aq)}}^- as a physical or chemical change. (b) At this extreme asymptotic limit, naive calculation yields pH=−log⁡(1.00×10−8)=8.00\text{pH} = -\log(1.00\times 10^{-8}) = 8.00, which suggests an acidic solute makes water basic—an impossible physical contradiction. Taking into account the autoionization of water (Kw=1.00×10−14K_w = 1.00\times 10^{-14} at 25∘C25^\circ\text{C}), calculate the true, chemically valid pH\text{pH} of this solution to two decimal places.

Answer and steps

Final answer

(a) The ability of HCl\text{HCl} to ionize completely is a chemical property; the ionization reaction is a chemical change (proton transfer forming hydronium ions via coordinate covalent bonding). (b) Setting [H3O+]=x+1.00×10−8[\text{H}_3\text{O}^+] = x + 1.00\times 10^{-8} in (x+1.00×10−8)(x)=1.00×10−14(x + 1.00\times 10^{-8})(x) = 1.00\times 10^{-14} gives x=9.51×10−8 Mx = 9.51\times 10^{-8}\text{ M}, so [H3O+]total=1.051×10−7 M[\text{H}_3\text{O}^+]_{\text{total}} = 1.051\times 10^{-7}\text{ M}, yielding pH=6.98\text{pH} = 6.98.

Steps

Part (a): Classifying the Property and Change

  1. Chemical Property vs. Physical Property:

    • A physical property can be observed or measured without altering the chemical identity of the substance (e.g., boiling point, density).
    • A chemical property describes a substance's potential to undergo a specific chemical change by breaking or forming chemical bonds.
    • The ability of HCl\ce{HCl} to ionize completely in water describes its chemical reactivity as a strong Brønsted–Lowry acid. Therefore, it is a chemical property.
  2. Chemical Change vs. Physical Change:

    • In the ionization reaction: HClX (g)+HX2OX (l)→HX3OX+X (aq)+ClX−X (aq)\ce{HCl_{(g)} + H2O_{(l)} -> H3O^+_{(aq)} + Cl^-_{(aq)}} the covalent bond between hydrogen and chlorine in HCl\ce{HCl} is cleaved, and a proton (HX+\ce{H^+}) is transferred to a lone pair on the oxygen atom of water, forming a new coordinate covalent bond in the hydronium ion (HX3OX+\ce{H3O^+}).
    • Because new chemical species are generated through bond breaking and bond making, this process is a chemical change.

Part (b): Calculating the True pH\text{pH}

  1. Understanding the Common Pitfall:

    • Hydrochloric acid is a strong acid and dissociates completely: [HX3OX+]HCl=1.00×10−8 M[\ce{H3O+}]_{\ce{HCl}} = 1.00\times 10^{-8}\text{ M}
    • Naively calculating pH=−log⁡(1.00×10−8)=8.00\text{pH} = -\log(1.00\times 10^{-8}) = 8.00 suggests an acidic solution is basic (pH>7\text{pH} > 7 at 25∘C25^\circ\text{C}), which is physically impossible. Adding an acid to pure water must lower the pH\text{pH} below 7.007.00.
    • When the acid concentration is comparable to or less than 10−7 M10^{-7}\text{ M}, the autoionization of water cannot be neglected: 2 HX2OX (l)⇌HX3OX+X (aq)+OHX−X (aq)\ce{2H2O_{(l)} <=> H3O^+_{(aq)} + OH^-_{(aq)}}
  2. Setting Up the Equilibrium Equation:

    • Let xx represent the concentration of OHX−\ce{OH^-} produced by the autoionization of water: [OHX−]=x[\ce{OH^-}] = x
    • Because water produces HX3OX+\ce{H3O^+} and OHX−\ce{OH^-} in a 1:11:1 mole ratio, the autoionization of water also contributes xx to the hydronium ion concentration.
    • Accounting for both sources of hydronium ions: [HX3OX+]total=[HX3OX+]HCl+[HX3OX+]water=1.00×10−8+x[\ce{H3O+}]_{\text{total}} = [\ce{H3O+}]_{\ce{HCl}} + [\ce{H3O+}]_{\text{water}} = 1.00\times 10^{-8} + x
  3. Solving for xx Using KwK_w:

    • The ion-product constant of water at 25∘C25^\circ\text{C} is Kw=1.00×10−14K_w = 1.00\times 10^{-14}: [HX3OX+][OHX−]=(x+1.00×10−8)(x)=1.00×10−14[\ce{H3O+}][\ce{OH^-}] = (x + 1.00\times 10^{-8})(x) = 1.00\times 10^{-14}
    • Rearrange into a standard quadratic equation: x2+(1.00×10−8)x−1.00×10−14=0x^2 + (1.00\times 10^{-8})x - 1.00\times 10^{-14} = 0
    • Applying the quadratic formula x=−b+b2−4ac2ax = \frac{-b + \sqrt{b^2 - 4ac}}{2a} (taking the positive root for concentration): x=−1.00×10−8+(1.00×10−8)2−4(1)(−1.00×10−14)2x = \frac{-1.00\times 10^{-8} + \sqrt{(1.00\times 10^{-8})^2 - 4(1)(-1.00\times 10^{-14})}}{2} x=−1.00×10−8+1.00×10−16+4.00×10−142x = \frac{-1.00\times 10^{-8} + \sqrt{1.00\times 10^{-16} + 4.00\times 10^{-14}}}{2} x=−1.00×10−8+4.01×10−142≈−1.00×10−8+2.0025×10−72≈9.51×10−8 Mx = \frac{-1.00\times 10^{-8} + \sqrt{4.01\times 10^{-14}}}{2} \approx \frac{-1.00\times 10^{-8} + 2.0025\times 10^{-7}}{2} \approx 9.51\times 10^{-8}\text{ M}
  4. Determining the Final [HX3OX+][\ce{H3O+}] and pH\text{pH}:

    • Total hydronium ion concentration: [HX3OX+]total=1.00×10−8 M+9.51×10−8 M=1.051×10−7 M[\ce{H3O+}]_{\text{total}} = 1.00\times 10^{-8}\text{ M} + 9.51\times 10^{-8}\text{ M} = 1.051\times 10^{-7}\text{ M}
    • Calculate pH\text{pH}: pH=−log⁡(1.051×10−7)≈6.98\text{pH} = -\log(1.051\times 10^{-7}) \approx 6.98
    • The resulting pH\text{pH} of 6.986.98 is slightly less than 7.007.00, consistent with an extremely dilute acidic solution.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student simply adds the pure water autoionization [H3O+] of 1.00 × 10^-7 M to the acid concentration without accounting for Le Chatelier's suppression of water autoionization.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Chemical property ; ionization involves forming hydronium and chloride ions. ⟹\Longrightarrow Chemical change ; covalent bonds are broken and new ions are formed.

  2. Step 2

    [H\text{H}3O\text{O}^+]{acid\text{acid}} = 1.00 ×\times 10^{-8} M\text{ M} \Longrightarrow [H\text{H}3O\text{O}^+]{water\text{water}} = 1.00 ×\times 10^{-7} M\text{ M} \Longrightarrow Total \text{Total }[H\text{H}3O\text{O}^+] = 1.00 ×\times 10^{-8} + 1.00 ×\times 10^{-7} = 1.10 ×\times 10^{-7} M\text{ M}

    Correct

    Let x=[OH−]=[H3O+]waterx = [\text{OH}^-] = [\text{H}_3\text{O}^+]_{\text{water}}. Then [H3O+]total=1.00×10−8+x[\text{H}_3\text{O}^+]_{\text{total}} = 1.00 \times 10^{-8} + x, and (1.00×10−8+x)(x)=1.00×10−14(1.00 \times 10^{-8} + x)(x) = 1.00 \times 10^{-14}, which gives x=9.51×10−8 Mx = 9.51 \times 10^{-8}\text{ M} and [H3O+]total=1.051×10−7 M[\text{H}_3\text{O}^+]_{\text{total}} = 1.051 \times 10^{-7}\text{ M}.

    Adding H3O+\text{H}_3\text{O}^+ from HCl\text{HCl} exerts a common-ion effect that shifts the water autoionization equilibrium 2 HX2O⇌HX3OX++OHX−\ce{2H2O <=> H3O+ + OH-} to the left by Le Chatelier's principle. Because of this suppression, water contributes less than 1.00×10−7 M1.00 \times 10^{-7}\text{ M} of H3O+\text{H}_3\text{O}^+.

  3. Step 3

    pH=−log⁡(1.10×10−7)=6.96\text{pH} = -\log(1.10 \times 10^{-7}) = 6.96

    Correct

    pH=−log⁡(1.051×10−7)=6.98\text{pH} = -\log(1.051 \times 10^{-7}) = 6.98

    You applied the pH\text{pH} formula correctly, but the numerical result was affected by the unshifted [H3O+][\text{H}_3\text{O}^+] value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the ability to ionize as a chemical property.

You correctly identified the ionization reaction as a chemical change involving bond cleavage and formation.

You recognized that water autoionization must be included to avoid the impossible result of pH=8.00\text{pH} = 8.00 for an acid.

You correctly applied the definition of pH=−log⁡[H3O+]\text{pH} = -\log[\text{H}_3\text{O}^+].

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Equilibrium Shift in Water Autoionization

You simply added 1.00×10−7 M1.00 \times 10^{-7}\text{ M} to the acid concentration without solving the KwK_w equilibrium expression.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the contribution of water autoionization as a fixed constant (1.00×10−7 M1.00 \times 10^{-7}\text{ M}) rather than an equilibrium process subject to Le Chatelier's principle. The added hydronium ions from HCl\text{HCl} act as a common ion, suppressing water autoionization so that [extH3extO+]water=[OH−]=x<1.00×10−7 M[ ext{H}_3 ext{O}^+]_{\text{water}} = [\text{OH}^-] = x < 1.00 \times 10^{-7}\text{ M}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Equilibrium Coupling via $K_w$
  • In any aqueous solution at 25∘C25^\circ\text{C}, the equilibrium [H3O+][OH−]=1.00×10−14[\text{H}_3\text{O}^+][\text{OH}^-] = 1.00 \times 10^{-14} must hold simultaneously with the charge balance.

  • Set [OH−]=x[\text{OH}^-] = x, write [H3O+]=cacid+x[\text{H}_3\text{O}^+] = c_{\text{acid}} + x, and substitute both into [H3O+][OH−]=Kw[\text{H}_3\text{O}^+][\text{OH}^-] = K_w rather than assuming x=10−7 Mx = 10^{-7}\text{ M}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Let x=[OH−]x = [\text{OH}^-] be the concentration of hydronium and hydroxide produced by water autoionization: [H3O+]total=1.00×10−8+x[\text{H}_3\text{O}^+]_{\text{total}} = 1.00 \times 10^{-8} + x.

  2. Set up the ion-product equation: (x+1.00×10−8)(x)=1.00×10−14⟹x2+(1.00×10−8)x−1.00×10−14=0(x + 1.00 \times 10^{-8})(x) = 1.00 \times 10^{-14} \Longrightarrow x^2 + (1.00 \times 10^{-8})x - 1.00 \times 10^{-14} = 0.

  3. Solve for the positive root using the quadratic formula: x=−1.00×10−8+1.00×10−16+4.00×10−142≈9.51×10−8 Mx = \frac{-1.00 \times 10^{-8} + \sqrt{1.00 \times 10^{-16} + 4.00 \times 10^{-14}}}{2} \approx 9.51 \times 10^{-8}\text{ M}.

  4. Find total hydronium: [H3O+]total=1.00×10−8+9.51×10−8=1.051×10−7 M[\text{H}_3\text{O}^+]_{\text{total}} = 1.00 \times 10^{-8} + 9.51 \times 10^{-8} = 1.051 \times 10^{-7}\text{ M}.

  5. Calculate final pH\text{pH}: pH=−log⁡(1.051×10−7)=6.98\text{pH} = -\log(1.051 \times 10^{-7}) = 6.98.

Final answer

(a) Chemical property; chemical change. (b) pH=6.98\text{pH} = 6.98.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the common-ion effect and how adding an acid suppresses water autoionization via Le Chatelier's principle.

  • Practice setting up quadratic equilibrium expressions using Kw=[H3O+][OH−]K_w = [\text{H}_3\text{O}^+][\text{OH}^-] whenever strong acid or strong base concentrations are ≤10−6 M\le 10^{-6}\text{ M}.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the dissolution and ionization of a gas in water with a purely physical phase change or mixing process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Physical property because dissolving is a physical process. Physical change because dissolving gas into water is just a change of state.

    Correct

    Chemical property (ability to ionize completely) and chemical change (ionization reaction HClX (g)+HX2OX (l)→HX3OX+X (aq)+ClX−X (aq)\ce{HCl_{(g)} + H2O_{(l)} -> H3O^+_{(aq)} + Cl^-_{(aq)}}).

    You treated the dissolution of HCl\ce{HCl} gas as a purely physical mixing or phase change. While dissolving molecular solutes like sugar or oxygen gas involves only intermolecular forces, the dissolution of HCl\ce{HCl} in water involves the chemical cleavage of the polar covalent H−Cl\ce{H-Cl} bond and the formation of a new coordinate covalent O−H\ce{O-H} bond in HX3OX+\ce{H3O^+}. Because covalent bonds break and new chemical species are produced, the process is a chemical change, and the capacity to undergo it is a chemical property.

  2. Step 2

    [HX3OX+]=1.00×10−8+x  ⟹  Kw=(1.00×10−8+x)(x)=1.00×10−14  ⟹  x2+(1.00×10−8)x−1.00×10−14=0[\ce{H3O+}] = 1.00\times 10^{-8} + x \implies K_w = (1.00\times 10^{-8} + x)(x) = 1.00\times 10^{-14} \implies x^2 + (1.00\times 10^{-8})x - 1.00\times 10^{-14} = 0

  3. Step 3

    x=9.51×10−8 M  ⟹  [HX3OX+]=1.00×10−8+9.51×10−8=1.05×10−7 M  ⟹  pH=−log⁡(1.05×10−7)=6.98x = 9.51\times 10^{-8}\text{ M} \implies [\ce{H3O+}] = 1.00\times 10^{-8} + 9.51\times 10^{-8} = 1.05\times 10^{-7}\text{ M} \implies \text{pH} = -\log(1.05\times 10^{-7}) = 6.98

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that an acidic solution cannot have a basic pH\text{pH} above 7.007.00.

You accounted for the autoionization of water using Kw=1.00×10−14K_w = 1.00\times 10^{-14}.

You accurately formulated and solved the quadratic equilibrium equation.

You correctly calculated the final pH\text{pH} as 6.986.98.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Dissolution/Ionization with Physical Change

You assumed all dissolution processes and gas-into-liquid introductions are strictly physical phase changes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You relied on the heuristic that 'dissolving is always physical' without checking whether intramolecular chemical bonds break and new chemical bonds form during the interaction with solvent molecules.

REASONING PATH
Your ACEpath teacher’s suggested approach
Bond Cleavage vs. Intermolecular Separation
  • If covalent or ionic bonds break and new coordinate or covalent bonds form between solute and solvent, the dissolution is a chemical change.

  • Examine the reaction equation: when molecular HClX (g)\ce{HCl_{(g)}} reacts with HX2OX (l)\ce{H2O_{(l)}} to yield hydronium ions (HX3OX+\ce{H3O^+}) and chloride ions (ClX−\ce{Cl^-}), covalent bonds have been cleaved and formed, confirming a chemical change.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify whether the chemical formula and bonding of the solute change upon contact with water: HClX (g)+HX2OX (l)→HX3OX+X (aq)+ClX−X (aq)\ce{HCl_{(g)} + H2O_{(l)} -> H3O^+_{(aq)} + Cl^-_{(aq)}}.

  2. Observe that the polar covalent H−Cl\ce{H-Cl} bond is broken and a new coordinate covalent bond is formed with the oxygen atom of water to create hydronium (HX3OX+\ce{H3O^+}).

  3. Conclude that because new chemical species are formed via bond rearrangement, the reaction is a chemical change, and the inherent capacity of HCl\ce{HCl} to undergo this reaction is a chemical property.

Final answer

(a) Chemical property; chemical change. (b) pH=6.98\text{pH} = 6.98.

NEXT STEPS
Final Takeaways from Your Teacher
  • Contrast physical dissolution (such as dissolving solid CX12HX22OX11\ce{C12H22O11} in water, where covalent bonds remain intact) with reactive dissolution (such as HCl\ce{HCl}, NHX3\ce{NH3}, or COX2\ce{CO2} in water, where covalent bonds are broken and formed).

  • Practice classifying properties that describe reactivity (like acidity, flammability, and ionization) versus intrinsic physical parameters (like boiling point, density, and color).

OverviewACEpath Teacher's Diagnosis

03 The student sets up the quadratic expression but makes a sign error in the quadratic formula, adding the linear term b instead of using -b.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Chemical property because it describes reactivity and ion formation in water. ⟹\Longrightarrow Chemical change because HCl\text{HCl} reacts with water to form H3O+\text{H}_3\text{O}^+ and Cl−\text{Cl}^-.

  2. Step 2

    Kw=[H3O+][OH−]=(1.00×10−8+x)(x)=1.00×10−14⟹x2+1.00×10−8x−1.00×10−14=0K_w = [\text{H}_3\text{O}^+][\text{OH}^-] = (1.00\times 10^{-8} + x)(x) = 1.00\times 10^{-14} \Longrightarrow x^2 + 1.00\times 10^{-8}x - 1.00\times 10^{-14} = 0

  3. Step 3

    x=1.00×10−8+1.00×10−16+4.00×10−142=1.00×10−8+2.0025×10−72=1.05×10−7 Mx = \frac{1.00\times 10^{-8} + \sqrt{1.00\times 10^{-16} + 4.00\times 10^{-14}}}{2} = \frac{1.00\times 10^{-8} + 2.0025\times 10^{-7}}{2} = 1.05\times 10^{-7}\text{ M}

    Correct

    x=−1.00×10−8+(1.00×10−8)2−4(1)(−1.00×10−14)2≈9.51×10−8 Mx = \frac{-1.00\times 10^{-8} + \sqrt{(1.00\times 10^{-8})^2 - 4(1)(-1.00\times 10^{-14})}}{2} \approx 9.51\times 10^{-8}\text{ M}

    You omitted the negative sign on −b-b in the quadratic formula x=−b±b2−4ac2ax = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}, writing 1.00×10−81.00\times 10^{-8} instead of −1.00×10−8-1.00\times 10^{-8}.

  4. Step 4

    Total [H3O+]=1.00×10−8+1.05×10−7=1.15×10−7 M⟹pH=−log⁡(1.15×10−7)=6.94\text{Total }[\text{H}_3\text{O}^+] = 1.00\times 10^{-8} + 1.05\times 10^{-7} = 1.15\times 10^{-7}\text{ M} \Longrightarrow \text{pH} = -\log(1.15\times 10^{-7}) = 6.94

    Correct

    [H3O+]total=1.00×10−8+9.51×10−8=1.051×10−7 M⟹pH=−log⁡(1.051×10−7)=6.98[\text{H}_3\text{O}^+]_{\text{total}} = 1.00\times 10^{-8} + 9.51\times 10^{-8} = 1.051\times 10^{-7}\text{ M} \Longrightarrow \text{pH} = -\log(1.051\times 10^{-7}) = 6.98

    Your calculation steps were logically sound, but the numerical result was affected by the sign error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between a chemical property and a chemical change based on bond alteration and new species formation.

You recognized that in extremely dilute acid solutions, water autoionization must be included rather than assuming pH=−log⁡(10−8)=8.00\text{pH} = -\log(10^{-8}) = 8.00.

You successfully set up the mass-action equilibrium equation and converted it into standard quadratic form.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Quadratic formula sign error

You wrote bb instead of −b-b as the leading term in the quadratic formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A lapse in applying the quadratic formula x=−b±b2−4ac2ax = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a} caused you to drop the leading negative sign on the linear coefficient bb.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadratic Formula Sign Verification
  • For ax2+bx+c=0ax^2 + bx + c = 0, the roots are given by x=−b±b2−4ac2ax = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}. When b>0b > 0, the first term must be negative (−b<0-b < 0).

  • Always write out the general quadratic formula explicitly before substituting numerical values to avoid dropping the leading negative sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify a=1a = 1, b=1.00×10−8b = 1.00\times 10^{-8}, and c=−1.00×10−14c = -1.00\times 10^{-14}.

  2. Substitute into the quadratic formula taking the positive root: x=−(1.00×10−8)+(1.00×10−8)2−4(1)(−1.00×10−14)2(1)x = \frac{-(1.00\times 10^{-8}) + \sqrt{(1.00\times 10^{-8})^2 - 4(1)(-1.00\times 10^{-14})}}{2(1)}.

  3. Evaluate the numerator: x=−1.00×10−8+2.0025×10−72=9.51×10−8 Mx = \frac{-1.00\times 10^{-8} + 2.0025\times 10^{-7}}{2} = 9.51\times 10^{-8}\text{ M}.

  4. Calculate total hydronium concentration: [H3O+]total=1.00×10−8+9.51×10−8=1.051×10−7 M[\text{H}_3\text{O}^+]_{\text{total}} = 1.00\times 10^{-8} + 9.51\times 10^{-8} = 1.051\times 10^{-7}\text{ M}.

  5. Calculate pH=−log⁡(1.051×10−7)=6.98\text{pH} = -\log(1.051\times 10^{-7}) = 6.98.

Final answer

(a) Chemical property; chemical change. (b) pH=6.98\text{pH} = 6.98

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check sign conventions when substituting coefficients into the quadratic formula, particularly ensuring bb becomes −b-b.

  • Perform a quick sanity check: adding acid suppresses water dissociation (x<1.00×10−7 Mx < 1.00\times 10^{-7}\text{ M}), so obtaining x=1.05×10−7 Mx = 1.05\times 10^{-7}\text{ M} immediately signals an algebraic error.

Lock it in

Similar question

01

Calculate the pH\text{pH} of a 1.00×10−8 M1.00 \times 10^{-8}\text{ M} aqueous solution of NaOH\text{NaOH} at 25∘C25^\circ\text{C} (Kw=1.00×10−14K_w = 1.00 \times 10^{-14}). Round to two decimal places.

Answer

pH=7.02\text{pH} = 7.02. Let x=[H3O+]x = [\text{H}_3\text{O}^+]; then [OH−]=1.00×10−8+x[\text{OH}^-] = 1.00 \times 10^{-8} + x. Solving (x)(x+1.00×10−8)=1.00×10−14(x)(x + 1.00 \times 10^{-8}) = 1.00 \times 10^{-14} yields x=9.51×10−8 Mx = 9.51 \times 10^{-8}\text{ M}, so pH=−log⁡(9.51×10−8)≈7.02\text{pH} = -\log(9.51 \times 10^{-8}) \approx 7.02.

02

Calculate the pH\text{pH} of a 1.00×10−7 M1.00 \times 10^{-7}\text{ M} aqueous solution of HCl\text{HCl} at 25∘C25^\circ\text{C} to two decimal places.

Answer

pH=6.79\text{pH} = 6.79. Solving [H3O+]2−(1.00×10−7)[H3O+]−1.00×10−14=0[\text{H}_3\text{O}^+]^2 - (1.00 \times 10^{-7})[\text{H}_3\text{O}^+] - 1.00 \times 10^{-14} = 0 gives [H3O+]=1.00×10−7+1.00×10−14+4.00×10−142=1.618×10−7 M[\text{H}_3\text{O}^+] = \frac{1.00 \times 10^{-7} + \sqrt{1.00 \times 10^{-14} + 4.00 \times 10^{-14}}}{2} = 1.618 \times 10^{-7}\text{ M}, giving pH=−log⁡(1.618×10−7)≈6.79\text{pH} = -\log(1.618 \times 10^{-7}) \approx 6.79.

03

At 25∘C25^\circ\text{C}, what concentration of strong monoprotic acid HA\text{HA} will produce an equilibrium solution with pH=6.90\text{pH} = 6.90?

Answer

cacid=4.65×10−8 Mc_{\text{acid}} = 4.65 \times 10^{-8}\text{ M}. At pH=6.90\text{pH} = 6.90, [H3O+]=10−6.90≈1.259×10−7 M[\text{H}_3\text{O}^+] = 10^{-6.90} \approx 1.259 \times 10^{-7}\text{ M}. Then [OH−]=1.00×10−141.259×10−7≈7.943×10−8 M[\text{OH}^-] = \frac{1.00 \times 10^{-14}}{1.259 \times 10^{-7}} \approx 7.943 \times 10^{-8}\text{ M}. From charge balance, cacid=[H3O+]−[OH−]=1.259×10−7−7.943×10−8=4.65×10−8 Mc_{\text{acid}} = [\text{H}_3\text{O}^+] - [\text{OH}^-] = 1.259 \times 10^{-7} - 7.943 \times 10^{-8} = 4.65 \times 10^{-8}\text{ M}.

Loading workspace…