Resources

An electroplating facility plates chromium onto steel bumpers from an acidic bath containing hexavalent dichromate ions according to the reduction half-reaction Cr2O72−(aq)+14H+(aq)+12e−→2Cr(s)+7H2O(l)\text{Cr}_2\text{O}_7^{2-}(aq) + 14\text{H}^+(aq) + 12e^- \rightarrow 2\text{Cr}(s) + 7\text{H}_2\text{O}(l). Due to parasitic hydrogen evolution at high overpotentials, the cathode operates at a current efficiency of only 18.5%18.5\%. Calculate the total mass of solid chromium metal (molar mass 52.00 g/mol52.00\text{ g/mol}) deposited when a constant total current of 150 A150\text{ A} is passed through the bath for 1.50 h1.50\text{ h}. Use F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-.

Answer and steps

Final answer

29.6 g29.6\text{ g}

Steps

01

Calculate the Total Electric Charge Passed

Electric charge QQ is related to current II and time tt by: Q=I⋅tQ = I \cdot t

Convert the electroplating time from hours to seconds: t=1.50 h⋅3600 s1 h=5400 st = 1.50\text{ h} \cdot \frac{3600\text{ s}}{1\text{ h}} = 5400\text{ s}

Now, compute the total charge: Qtotal=150 A⋅5400 s=810,000 CQ_{\text{total}} = 150\text{ A} \cdot 5400\text{ s} = 810{,}000\text{ C}


02

Determine the Effective Charge for Plating

Due to competitive parasitic hydrogen gas evolution (2 HX++2 eX−→HX2\ce{2H+ + 2e- -> H2}) at the cathode surface accounting for the 18.5%18.5\% parasitic current consumption, the effective current efficiency dedicated to the deposition pathway is: η=100%−18.5%=81.5%=0.815\eta = 100\% - 18.5\% = 81.5\% = 0.815

The effective charge QeffQ_{\text{eff}} utilized is therefore: Qeff=Qtotal⋅η=810,000 C⋅0.815=660,150 CQ_{\text{eff}} = Q_{\text{total}} \cdot \eta = 810{,}000\text{ C} \cdot 0.815 = 660{,}150\text{ C}


03

Apply Faraday's Law to Find Deposited Mass

According to Faraday's law of electrolysis, the mass mm of material deposited is given by: m=Qeff⋅Mn⋅Fm = \frac{Q_{\text{eff}} \cdot M}{n \cdot F}

where:

  • M=52.00 g/molM = 52.00\text{ g/mol} is the molar mass of chromium,
  • n=12 mol e−n = 12\text{ mol } e^- represents the total electron transfer specified in the balanced half-reaction equation CrX2OX7X2−+14 HX++12 eX−→2 Cr+7 HX2O\ce{Cr2O7^{2-} + 14H+ + 12e- -> 2Cr + 7H2O},
  • F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^- is the Faraday constant.

Substitute the known values into the expression: m=660,150 C⋅52.00 g/mol12⋅96,485 C/mol e−m = \frac{660{,}150\text{ C} \cdot 52.00\text{ g/mol}}{12 \cdot 96{,}485\text{ C/mol }e^-}

m=34,327,8001,157,820 g≈29.649 gm = \frac{34{,}327{,}800}{1{,}157{,}820}\text{ g} \approx 29.649\text{ g}

Rounding to three significant figures gives: m≈29.6 gm \approx 29.6\text{ g}


Key Pitfall to Avoid

When calculating electrolytic deposition from complex oxyanion baths, always identify whether a given percentage represents the fraction of current lost to side reactions (such as parasitic hydrogen evolution) or the fraction directly captured by the metal. Properly accounting for this division of total charge ensures accurate mass predictions.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the cathode's 18.5% current efficiency, assuming that all passed electrical charge deposits chromium.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=1.50×3600=5400 s  ⟹  Q=I×t=150×5400=810000 Ct = 1.50 \times 3600 = 5400\text{ s} \implies Q = I \times t = 150 \times 5400 = 810000\text{ C}

  2. Step 2

    n(e−)=81000096485=8.3951 moln(e^-) = \frac{810000}{96485} = 8.3951\text{ mol}

  3. Step 3

    n(Cr)=8.39516=1.3992 moln(\text{Cr}) = \frac{8.3951}{6} = 1.3992\text{ mol}

    Correct

    Qeff=Qtotal⋅η=810,000 C×(1−0.185)=660,150 CQ_{\text{eff}} = Q_{\text{total}} \cdot \eta = 810{,}000\text{ C} \times (1 - 0.185) = 660{,}150\text{ C}

    You related all supplied electrons directly to chromium deposition without applying the current efficiency. Parasitic hydrogen evolution consumes part of the current, so only the effective charge contributes to chromium plating.

  4. Step 4

    m(Cr)=1.3992×52.00=72.8 gm(\text{Cr}) = 1.3992 \times 52.00 = 72.8\text{ g}

    Correct

    m=Qeff⋅Mn⋅F=660,150 C×52.00 g/mol12×96,485 C/mol e−≈29.6 gm = \frac{Q_{\text{eff}} \cdot M}{n \cdot F} = \frac{660{,}150\text{ C} \times 52.00\text{ g/mol}}{12 \times 96{,}485\text{ C/mol }e^-} \approx 29.6\text{ g}

    Because the current efficiency was omitted in the preceding step, your resulting mass of solid chromium is too high.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the time from hours to seconds.

You accurately calculated the total charge passed using Q=I⋅tQ = I \cdot t.

You correctly applied Faraday's constant to determine total electron moles.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Current Efficiency

You assumed 100%100\% of the supplied electrical current deposited chromium, overlooking the current efficiency factor specified in the problem.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In real electrolytic systems, parasitic side reactions (such as hydrogen evolution at the cathode) consume a fraction of the current. Failing to scale total charge by the deposition efficiency (eta\\eta) leads to an overestimation of the deposited mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Parasitic Current Losses
  • When side reactions occur, the effective fraction of current driving the desired reduction is eta=100%−% parasitic loss\\eta = 100\% - \%\text{ parasitic loss}.

  • Scan the problem statement for current efficiency or side-reaction percentages before calculating product yields.

Scale Charge Before Faraday's Law
  • Only the effective charge (Qeff=Qtotal⋅ηQ_{\text{eff}} = Q_{\text{total}} \cdot \eta) deposits the target metal: m=Qeff⋅Mn⋅Fm = \frac{Q_{\text{eff}} \cdot M}{n \cdot F}.

  • Multiply total charge by the fractional efficiency before converting to moles of deposited metal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the effective deposition efficiency by accounting for parasitic hydrogen consumption: η=100%−18.5%=81.5%=0.815\eta = 100\% - 18.5\% = 81.5\% = 0.815.

  2. Calculate the effective charge utilized for chromium reduction: Qeff=810,000 C×0.815=660,150 CQ_{\text{eff}} = 810{,}000\text{ C} \times 0.815 = 660{,}150\text{ C}.

  3. Apply Faraday's law to calculate the deposited chromium mass: m=660,150 C×52.00 g/mol12×96,485 C/mol e−≈29.6 gm = \frac{660{,}150\text{ C} \times 52.00\text{ g/mol}}{12 \times 96{,}485\text{ C/mol }e^-} \approx 29.6\text{ g}.

Final answer

29.6 g29.6\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether an electroplating problem states a current efficiency or mentions competitive side reactions.

  • Compute the effective charge Qeff=Qtotal⋅ηQ_{\text{eff}} = Q_{\text{total}} \cdot \eta prior to applying Faraday's law.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the electron stoichiometry by using 12 moles of electrons per 1 mole of Cr instead of dividing by the coefficient of 2 for Cr.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=1.50×3600=5400 s  ⟹  Qtotal=150×5400=810,000 Ct = 1.50 \times 3600 = 5400\text{ s} \implies Q_{\text{total}} = 150 \times 5400 = 810{,}000\text{ C}

  2. Step 2

    Qeff=810,000×0.185=149,850 CQ_{\text{eff}} = 810{,}000 \times 0.185 = 149{,}850\text{ C}

  3. Step 3

    n(Cr)=149,85012×96,485=0.1294 moln(\text{Cr}) = \frac{149{,}850}{12 \times 96{,}485} = 0.1294\text{ mol}

    Correct

    n(Cr)=QeffF×2 mol Cr12 mol e−=149,850 C6×96,485 C/mol e−≈0.2589 moln(\text{Cr}) = \frac{Q_{\text{eff}}}{F} \times \frac{2\text{ mol Cr}}{12\text{ mol }e^-} = \frac{149{,}850\text{ C}}{6 \times 96{,}485\text{ C/mol }e^-} \approx 0.2589\text{ mol}

    In the balanced reduction half-reaction CrX2OX7X2−+14 HX++12 eX−→2 Cr+7 HX2O\ce{Cr2O7^{2-} + 14H+ + 12e- -> 2Cr + 7H2O}, 12 mol e−12\text{ mol }e^- produce 2 mol Cr2\text{ mol Cr}, which is a stoichiometric ratio of 6 mol e−6\text{ mol }e^- per 1 mol Cr1\text{ mol Cr}. By dividing by 1212 without including the numerator coefficient of 22, you used double the required electron ratio.

  4. Step 4

    m(Cr)=0.1294×52.00=6.73 gm(\text{Cr}) = 0.1294 \times 52.00 = 6.73\text{ g}

    Correct

    m(Cr)=0.2589 mol×52.00 g/mol≈13.5 gm(\text{Cr}) = 0.2589\text{ mol} \times 52.00\text{ g/mol} \approx 13.5\text{ g}

    Your multiplication of molar quantity by molar mass is mathematically correct, but the resulting mass is halved because of the stoichiometric error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the electroplating duration from hours to seconds to obtain the total charge in coulombs.

You correctly applied the 18.5%18.5\% cathode current efficiency to isolate the charge driving chromium reduction.

You correctly multiplied your calculated moles of chromium by its molar mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electron-to-product stoichiometric ratio misidentification

You divided the moles of electrons by 12 without accounting for the fact that 12 electrons produce 2 moles of solid chromium.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total electron coefficient in a redox half-reaction (ne−=12n_{e^-} = 12) with the electron requirement per mole of isolated metal product (ne−/νproduct=12/2=6n_{e^-}/\nu_{\text{product}} = 12/2 = 6).

REASONING PATH
Your ACEpath teacher’s suggested approach
Half-Reaction Mole Ratio Check
  • n(product)=QeffF×νproductνe−n(\text{product}) = \frac{Q_{\text{eff}}}{F} \times \frac{\nu_{\text{product}}}{\nu_{e^-}}

  • Write the stoichiometric factor 2 mol Cr12 mol e−\frac{2\text{ mol Cr}}{12\text{ mol }e^-} as an explicit unit conversion factor rather than assuming the electron count belongs solely in the denominator for one mole of product.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. n(Cr)=149,850 C96,485 C/mol e−×2 mol Cr12 mol e−=149,8506×96,485≈0.25886 moln(\text{Cr}) = \frac{149{,}850\text{ C}}{96{,}485\text{ C/mol }e^-} \times \frac{2\text{ mol Cr}}{12\text{ mol }e^-} = \frac{149{,}850}{6 \times 96{,}485} \approx 0.25886\text{ mol}

  2. m(Cr)=0.25886 mol×52.00 g/mol≈13.5 gm(\text{Cr}) = 0.25886\text{ mol} \times 52.00\text{ g/mol} \approx 13.5\text{ g}

Final answer

13.5 g13.5\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the mole ratio νmetalνe−\frac{\nu_{\text{metal}}}{\nu_{e^-}} explicitly with units during dimensional analysis.

  • Verify whether the stoichiometric coefficient of the target product in the half-reaction is greater than 1 before calculating moles.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by the current efficiency factor inverted (or divides by 0.185), erroneously increasing the calculated deposited mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    t=1.50×3600=5400 s  ⟹  Qtotal=150×5400=810000 Ct = 1.50 \times 3600 = 5400\text{ s} \implies Q_{\text{total}} = 150 \times 5400 = 810000\text{ C}

  2. Step 2

    Qeff=8100000.185=4378378 CQ_{\text{eff}} = \frac{810000}{0.185} = 4378378\text{ C}

    Correct

    Qeff=Qtotal×0.185=810,000 C×0.185=149,850 CQ_{\text{eff}} = Q_{\text{total}} \times 0.185 = 810{,}000\text{ C} \times 0.185 = 149{,}850\text{ C}

    You divided by the current efficiency factor 0.1850.185 instead of multiplying by it. Because side reactions consume part of the current, the useful charge must be a fraction of the total charge (Qeff<QtotalQ_{\text{eff}} < Q_{\text{total}}).

  3. Step 3

    n(Cr)=43783786×96485=7.5631 moln(\text{Cr}) = \frac{4378378}{6 \times 96485} = 7.5631\text{ mol}

    Correct

    n(Cr)=149,850 C6×96,485 C/mol≈0.2589 moln(\text{Cr}) = \frac{149{,}850\text{ C}}{6 \times 96{,}485\text{ C/mol}} \approx 0.2589\text{ mol}

    You correctly identified that reducing 2 mol of Cr2\text{ mol of Cr} requires 12 mol of e−12\text{ mol of }e^- (a 6:16:1 ratio), but the resulting mole value is affected by the incorrect charge carried over from Step 2.

  4. Step 4

    m(Cr)=7.5631×52.00=393 gm(\text{Cr}) = 7.5631 \times 52.00 = 393\text{ g}

    Correct

    m(Cr)=0.2589 mol×52.00 g/mol≈13.5 gm(\text{Cr}) = 0.2589\text{ mol} \times 52.00\text{ g/mol} \approx 13.5\text{ g}

    Your conversion from moles to mass using the molar mass is correct, but the numerical answer reflects the earlier charge calculation error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the plating duration into seconds.

You accurately calculated the total charge passed using Q=I⋅tQ = I \cdot t.

You recognized that 12 mol of e−12\text{ mol of }e^- reduces 2 mol of Cr2\text{ mol of Cr}, correctly simplifying the stoichiometric factor to 6 mol e−/mol Cr6\text{ mol }e^-/\text{mol Cr}.

You correctly used the molar mass of chromium to convert moles into grams.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted current efficiency calculation

Dividing total charge by current efficiency rather than multiplying by the decimal percentage.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of percentage scaling in efficiency problems. When finding actual product from known total electrical input, efficiency acts as a reduction factor (Quseful=Qtotal×η≤QtotalQ_{\text{useful}} = Q_{\text{total}} \times \eta \le Q_{\text{total}}). Dividing by a decimal less than 11 incorrectly scales the quantity up, implying more charge was used for plating than was supplied to the cell.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check on Useful Charge
  • In an electrolytic cell with parasitic side reactions, effective charge cannot exceed total input charge: Qeff≤QtotalQ_{\text{eff}} \le Q_{\text{total}}.

  • Check whether your calculated QeffQ_{\text{eff}} is smaller than QtotalQ_{\text{total}}. If it is larger, you divided instead of multiplied.

Efficiency Factor Direction
  • Actual mass or charge=Theoretical mass or charge×(Efficiency%/100)\text{Actual mass or charge} = \text{Theoretical mass or charge} \times (\text{Efficiency}\% / 100).

  • Multiply total input quantities by η\eta to find useful quantities; divide by η\eta only when calculating the required total input from a target product yield.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the total charge by the current efficiency: Qeff=810,000 C×0.185=149,850 CQ_{\text{eff}} = 810{,}000\text{ C} \times 0.185 = 149{,}850\text{ C}.

  2. Calculate moles of Cr\text{Cr} deposited using the 6 mol e−/mol Cr6\text{ mol }e^-/\text{mol Cr} ratio: n(Cr)=149,850 C6×96,485 C/mol≈0.25885 moln(\text{Cr}) = \frac{149{,}850\text{ C}}{6 \times 96{,}485\text{ C/mol}} \approx 0.25885\text{ mol}.

  3. Calculate the mass of chromium deposited: m(Cr)=0.25885 mol×52.00 g/mol≈13.5 gm(\text{Cr}) = 0.25885\text{ mol} \times 52.00\text{ g/mol} \approx 13.5\text{ g}.

Final answer

13.5 g13.5\text{ g}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a physical sanity check whenever working with efficiency: parasitic losses must decrease the deposited yield, never increase it.

  • Practice distinguishing between problems that ask for 'actual yield from given current' (multiply by η\eta) versus 'required current/time for a target yield' (divide by η\eta).

Lock it in

Similar question

01

A silver plating cell plates silver according to Ag+(aq)+e−→Ag(s)\text{Ag}^+(aq) + e^- \rightarrow \text{Ag}(s) (M=107.9 g/molM = 107.9\text{ g/mol}) at a current efficiency of 90.0%90.0\%. Calculate the mass of silver deposited when a current of 5.00 A5.00\text{ A} runs for 1930 s1930\text{ s}. (F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-)

Answer

9.71 g9.71\text{ g}. Key steps: Qtotal=5.00 A×1930 s=9650 CQ_{\text{total}} = 5.00\text{ A} \times 1930\text{ s} = 9650\text{ C}. Effective charge Qeff=9650 C×0.900=8685 CQ_{\text{eff}} = 9650\text{ C} \times 0.900 = 8685\text{ C}. Moles of electrons n(e−)=8685/96485=0.0900 moln(e^-) = 8685 / 96485 = 0.0900\text{ mol}. Since 1 mol e−1\text{ mol }e^- deposits 1 mol Ag1\text{ mol Ag}, m=0.0900 mol×107.9 g/mol≈9.71 gm = 0.0900\text{ mol} \times 107.9\text{ g/mol} \approx 9.71\text{ g}.

02

In the electrorefining of copper (Cu2++2e−→Cu\text{Cu}^{2+} + 2e^- \rightarrow \text{Cu}, M=63.55 g/molM = 63.55\text{ g/mol}), passing a constant current of 10.0 A10.0\text{ A} for 4000 s4000\text{ s} deposits 12.71 g12.71\text{ g} of copper metal. Calculate the current efficiency of the cathode. (F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-)

Answer

96.5%96.5\%. Key steps: n(Cu)=12.71 g/63.55 g/mol=0.200 moln(\text{Cu}) = 12.71\text{ g} / 63.55\text{ g/mol} = 0.200\text{ mol}. Theoretical charge needed is Qeff=0.200 mol×2×96,485 C/mol e−=38,594 CQ_{\text{eff}} = 0.200\text{ mol} \times 2 \times 96{,}485\text{ C/mol }e^- = 38{,}594\text{ C}. Total charge passed is Qtotal=10.0 A×4000 s=40,000 CQ_{\text{total}} = 10.0\text{ A} \times 4000\text{ s} = 40{,}000\text{ C}. Current efficiency is η=(38,594/40,000)×100%≈96.5%\eta = (38{,}594 / 40{,}000) \times 100\% \approx 96.5\%.

03

During nickel electroplating (Ni2++2e−→Ni\text{Ni}^{2+} + 2e^- \rightarrow \text{Ni}, M=58.69 g/molM = 58.69\text{ g/mol}), parasitic hydrogen gas evolution accounts for 12.0%12.0\% of the cathodic current. Determine the time (in minutes) required to deposit 5.87 g5.87\text{ g} of nickel using a total current of 8.00 A8.00\text{ A}. (F=96,485 C/mol e−F = 96{,}485\text{ C/mol }e^-)

Answer

45.7 min45.7\text{ min}. Key steps: Moles of nickel required n=5.87/58.69=0.100 moln = 5.87 / 58.69 = 0.100\text{ mol}. Required effective charge Qeff=0.100 mol×2×96,485 C/mol e−=19,297 CQ_{\text{eff}} = 0.100\text{ mol} \times 2 \times 96{,}485\text{ C/mol }e^- = 19{,}297\text{ C}. Deposition efficiency is η=100%−12.0%=88.0%=0.880\eta = 100\% - 12.0\% = 88.0\% = 0.880, giving effective current Ieff=8.00 A×0.880=7.04 AI_{\text{eff}} = 8.00\text{ A} \times 0.880 = 7.04\text{ A}. Time t=19,297 C/7.04 A≈2741 s≈45.7 mint = 19{,}297\text{ C} / 7.04\text{ A} \approx 2741\text{ s} \approx 45.7\text{ min}.

Loading workspace…