Resources

A student tests the effect of adding an inert gas on the rate of the gas-phase reaction 2NO2(g)→2NO(g)+O2(g)2\text{NO}_2(g) \rightarrow 2\text{NO}(g) + \text{O}_2(g) under two distinct conditions at constant temperature T=600 KT = 600\text{ K}: Case A: Argon gas is injected into a rigid, closed container of fixed volume VV. Case B: Argon gas is injected into a flexible reaction vessel held at constant total pressure PP. Common student intuition suggests that in both cases, adding gas increases total system pressure, thereby increasing total collisions and accelerating the reaction rate. (a) Applying collision theory, state whether the reaction rate increases, decreases, or remains unchanged in Case A, and explain at the molecular level in terms of reactant collision frequency. (b) State whether the reaction rate increases, decreases, or remains unchanged in Case B, explaining in terms of reactant concentrations and collision frequency.

Answer and steps

Final answer

(a) In Case A, the reaction rate remains completely unchanged. Although Ar increases total pressure and total collision frequency, the volume is constant, so [NO2][\text{NO}_2] remains unchanged; collisions between NO2\text{NO}_2 and Ar\text{Ar} are chemically inert and do not alter the collision frequency between two NO2\text{NO}_2 molecules (ZNO2−NO2∝[NO2]2Z_{\text{NO}_2-\text{NO}_2} \propto [\text{NO}_2]^2); (b) In Case B, the reaction rate decreases. To maintain constant total pressure upon adding Ar, the volume VV must expand, which dilutes [NO2][\text{NO}_2]; because the rate depends on collisions between reactant molecules (Rate∝[NO2]2Rate \propto [\text{NO}_2]^2), the frequency of effective reactive collisions decreases.

Steps

Foundational Concept: Collision Theory and Reaction Rate

According to collision theory, the rate of a chemical reaction depends solely on the frequency of effective collisions between reactant molecules—collisions that possess energy greater than or equal to the activation energy (EaE_{\text{a}}) and proper molecular orientation:

Rate∝Zreactant-reactant⋅f\text{Rate} \propto Z_{\text{reactant-reactant}} \cdot f

where Zreactant-reactantZ_{\text{reactant-reactant}} is the collision frequency per unit volume between reacting species, and ff is the fraction of collisions with sufficient energy and correct orientation. At a fixed temperature TT, ff remains constant. For the bimolecular elementary step or rate-determining collision between two NOX2\ce{NO2} molecules:

ZNOX2−NOX2∝[NOX2]2=(nNOX2V)2Z_{\ce{NO2}-\ce{NO2}} \propto [\ce{NO2}]^2 = \left(\frac{n_{\ce{NO2}}}{V}\right)^2

Collisions between a reactant molecule (NOX2\ce{NO2}) and an inert gas atom (Ar\ce{Ar}) cannot lead to chemical transformation into NO\ce{NO} and OX2\ce{O2}. Therefore, only the concentration of NOX2\ce{NO2} determines the rate of reaction.


Part (a): Case A — Rigid Container (Constant Volume VV)

  1. Effect on Concentration: Because the container is rigid, the volume VV is fixed. Adding Ar(g)\ce{Ar}(g) does not change the amount of reactant moles, nNOX2n_{\ce{NO2}}. Consequently, the molar concentration of the reactant remains unchanged: [NOX2]=nNOX2V=constant[\ce{NO2}] = \frac{n_{\ce{NO2}}}{V} = \text{constant}
  2. Effect on Collision Frequency and Rate: While the introduction of argon increases the total pressure and the overall number of gas-particle collisions (NOX2−Ar\ce{NO2}-\ce{Ar} and Ar−Ar\ce{Ar}-\ce{Ar}), argon is chemically inert. The frequency of collisions between two NOX2\ce{NO2} molecules (ZNOX2−NOX2Z_{\ce{NO2}-\ce{NO2}}) depends solely on [NOX2][\ce{NO2}] and temperature TT, both of which are constant.
  3. Conclusion: The reaction rate remains unchanged.

Common Pitfall: Believing that an increase in total pressure always increases reaction rate. An increase in pressure only increases the rate if it increases the partial pressure (or molar concentration) of the reactants.


Part (b): Case B — Flexible Vessel (Constant Total Pressure PP)

  1. Effect on Volume and Concentration: By Dalton's law and the ideal gas law: Ptotal=(nNOX2+nAr)RTVP_{\text{total}} = \frac{(n_{\ce{NO2}} + n_{\ce{Ar}})RT}{V} To maintain a constant total pressure PtotalP_{\text{total}} when additional gas moles (nArn_{\ce{Ar}}) are introduced at constant temperature TT, the volume VV of the flexible vessel must expand (V↑V \uparrow).
  2. Effect on Collision Frequency and Rate: As the volume increases, the reactant is diluted: [NOX2]=nNOX2V↓[\ce{NO2}] = \frac{n_{\ce{NO2}}}{V} \downarrow Because [NOX2][\ce{NO2}] decreases, the average distance between NOX2\ce{NO2} molecules increases, directly reducing the frequency of collisions between reactant molecules: ZNOX2−NOX2∝[NOX2]2↓Z_{\ce{NO2}-\ce{NO2}} \propto [\ce{NO2}]^2 \downarrow
  3. Conclusion: The reaction rate decreases.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student believes that adding gas to a rigid container raises total pressure and overall collision frequency, wrongly assuming all collisions—including inert gas collisions—speed up the reaction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Adding Ar to a fixed volume increases total pressure PtotalP_{\text{total}}   ⟹  \implies More gas molecules lead to a higher collision frequency   ⟹  \implies Greater collision frequency causes more effective collisions   ⟹  \implies Therefore, the reaction rate increases.

    Correct

    The reaction rate remains unchanged. In a fixed volume VV, the concentration [NOX2]=nNOX2V[\ce{NO2}] = \frac{n_{\ce{NO2}}}{V} is constant. Although Ar\ce{Ar} increases total collisions, collisions between NOX2\ce{NO2} and Ar\ce{Ar} are chemically inert; the collision frequency between reactant molecules (ZNOX2−NOX2∝[NOX2]2Z_{\ce{NO2}-\ce{NO2}} \propto [\ce{NO2}]^2) is unchanged.

    You correctly noted that total pressure and overall particle collisions increase, but reaction rate depends exclusively on the frequency of collisions between reactant molecules (NOX2−NOX2\ce{NO2}-\ce{NO2}). Collisions involving inert argon atoms do not possess reactive pathways and cannot form products.

  2. Step 2

    In a flexible vessel at constant pressure, the volume must expand   ⟹  \implies [NOX2]=n/V[\ce{NO2}] = n/V decreases because volume increases   ⟹  \implies Lower concentration of NOX2\ce{NO2} reduces collisions between reactant molecules   ⟹  \implies Therefore, the reaction rate decreases.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the ideal gas relationship to determine that vessel volume must increase at constant total pressure.

You correctly linked the dilution of reactant concentration to a decrease in reactant-reactant collision frequency and reaction rate in Case B.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inert Gas Pressure vs. Reactant Collision Frequency

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated total collision frequency with the frequency of effective collisions between reacting molecules, treating inert gas collisions as chemically active.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Reactant Concentration and Partial Pressure
  • Reaction rate depends only on the concentrations or partial pressures of the reacting species, not on total system pressure: Rate∝[Reactant]n\text{Rate} \propto [\text{Reactant}]^n.

  • Always evaluate whether the volume or moles of the actual reactants change before concluding how reaction rate is affected.

Distinguish Inert Collisions from Reactive Collisions
  • Only collisions between reactant molecules with sufficient energy and correct orientation can lead to chemical change: Zreactive∝[Reactant]2Z_{\text{reactive}} \propto [\text{Reactant}]^2.

  • Disregard collisions between reactants and spectator/inert species like noble gases when evaluating collision frequency in collision theory.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that volume VV and moles of reactant nNOX2n_{\ce{NO2}} are both constant, so [NOX2]=nNOX2V[\ce{NO2}] = \frac{n_{\ce{NO2}}}{V} does not change.

  2. Apply collision theory: the rate depends solely on bimolecular collisions between two reactant molecules, ZNOX2−NOX2∝[NOX2]2Z_{\ce{NO2}-\ce{NO2}} \propto [\ce{NO2}]^2.

  3. Recognize that while NOX2−Ar\ce{NO2}-\ce{Ar} collisions occur, they cannot yield products because argon is chemically inert.

  4. Conclude that because the frequency of reactant-reactant collisions is unchanged, the reaction rate remains unchanged.

Final answer

(a) Remains unchanged; (b) Decreases.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between total gas pressure and the partial pressure (concentration) of reacting species.

  • Practice applying collision theory specifically to reactant-reactant collision frequency rather than overall molecular collisions.

OverviewACEpath Teacher's Diagnosis

02 The student assumes that because argon is chemically inert, it has no effect on reaction rate under any condition, overlooking the dilution caused by volume expansion at constant pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Volume is fixed, so moles of NO2\text{NO}_2 per unit volume is constant.   ⟹  \implies Argon does not react with NO2\text{NO}_2.   ⟹  \implies Collision frequency between NO2\text{NO}_2 molecules remains unchanged.   ⟹  \implies Therefore, the reaction rate remains unchanged.

  2. Step 2

    Argon is an inert gas and does not take part in the reaction.   ⟹  \implies Adding an unreactive gas does not change reactant properties.   ⟹  \implies The collision frequency of reacting NO2\text{NO}_2 molecules is unaffected by inert gas.

    Correct

    At constant total pressure PP in a flexible container, adding Ar\text{Ar} increases total moles of gas (ntotal=nNO2+nArn_{\text{total}} = n_{\text{NO}_2} + n_{\text{Ar}}). By the ideal gas law (V=ntotalRTPV = \frac{n_{\text{total}}RT}{P}), the volume VV must expand. This dilution lowers [NO2]=nNO2V[\text{NO}_2] = \frac{n_{\text{NO}_2}}{V}, thereby decreasing the collision frequency between NO2\text{NO}_2 molecules (ZNO2−NO2∝[NO2]2Z_{\text{NO}_2-\text{NO}_2} \propto [\text{NO}_2]^2).

    You treated the chemical inertness of argon as meaning it has no physical effect on the system. Because the vessel has a flexible boundary at constant total pressure, adding gas forces the volume to expand, which decreases reactant concentration and lowers reactant collision frequency.

  3. Step 3

    Therefore, the reaction rate remains unchanged.

    Correct

    Therefore, the reaction rate decreases.

    Because your previous step missed the volume expansion and subsequent decrease in reactant collision frequency, your final conclusion for Case B was incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that inert gas atoms do not participate in reactive collisions.

You demonstrated that at fixed volume, reactant concentration remains constant and collision frequency between reactant molecules is unchanged.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Overlooking Volume Expansion at Constant Total Pressure

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that an inert gas cannot influence reaction rate under any condition, forgetting that under constant total pressure in a flexible container, adding more moles of gas forces the volume to expand, which dilutes the reactant species.

REASONING PATH
Your ACEpath teacher’s suggested approach
Boundary Condition Check
  • For a gas mixture, adding an inert gas at constant VV leaves reactant partial pressures and concentrations constant ([A]=nAV[\text{A}] = \frac{n_{\text{A}}}{V}), but adding an inert gas at constant PP forces volume to expand (V=ntotalRTPV = \frac{n_{\text{total}}RT}{P}).

  • Always identify whether the container is rigid (constant VV) or flexible/piston-fitted (constant PP) before evaluating concentration changes.

Collision Frequency Dependence
  • Chemical reaction rate depends strictly on effective collisions between reactant molecules, with collision frequency proportional to reactant concentrations (ZA−A∝[A]2Z_{\text{A}-\text{A}} \propto [\text{A}]^2).

  • Check how the volume change alters the concentration of the reactants before predicting the collision rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the ideal gas relationship for constant PP and TT: V=(nNO2+nAr)RTPV = \frac{(n_{\text{NO}_2} + n_{\text{Ar}})RT}{P}. Adding argon increases total moles, requiring the flexible vessel to expand (V↑V \uparrow).

  2. Calculate the effect on reactant concentration: [NO2]=nNO2V[\text{NO}_2] = \frac{n_{\text{NO}_2}}{V}, which decreases due to the expanded volume.

  3. Apply collision theory: with fewer NO2\text{NO}_2 molecules per unit volume, the frequency of collisions between two NO2\text{NO}_2 molecules (ZNO2−NO2∝[NO2]2Z_{\text{NO}_2-\text{NO}_2} \propto [\text{NO}_2]^2) decreases.

  4. Conclude that with fewer reactant-reactant collisions per second, the overall reaction rate must decrease.

Final answer

(a) Remains unchanged; (b) Decreases

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between constant volume (rigid container) and constant pressure (movable piston/flexible boundary) problems.

  • Review the connection between macroscopic volume changes and microscopic collision frequencies for reacting gas molecules.

Lock it in

Similar question

01

An equimolar mixture of CO(g)\ce{CO(g)} and NOX2(g)\ce{NO2(g)} reacts according to CO(g)+NOX2(g)→COX2(g)+NO(g)\ce{CO(g) + NO2(g) -> CO2(g) + NO(g)}. Neon gas is added to the container at constant volume and temperature. Explain what happens to: (i) the total pressure, (ii) the partial pressure of CO\ce{CO}, and (iii) the initial rate of reaction.

Answer

(i) Total pressure increases because additional gas moles are added to a fixed volume (Ptotal=∑PiP_{\text{total}} = \sum P_i). (ii) The partial pressure of CO\ce{CO} remains unchanged because PCO=nCORTVP_{\ce{CO}} = \frac{n_{\ce{CO}}RT}{V} and neither nCOn_{\ce{CO}}, VV, nor TT changed. (iii) The reaction rate remains unchanged because the concentration of reactants and the frequency of CO−NOX2\ce{CO}-\ce{NO2} collisions are unaffected by inert neon.

02

For the elementary reaction 2 HI(g)→HX2(g)+IX2(g)\ce{2HI(g) -> H2(g) + I2(g)} taking place in a piston-cylinder apparatus at constant temperature, argon is introduced while the piston moves freely to maintain a constant total pressure of 1.0 atm1.0\text{ atm}. State whether the rate of production of HX2\ce{H2} increases, decreases, or remains the same, and justify your answer using collision theory.

Answer

The rate of production of HX2\ce{H2} decreases. To maintain constant total pressure upon adding argon, the piston must expand, increasing the total volume VV. This decreases the molar concentration of hydrogen iodide ([HI]=nHIV[\ce{HI}] = \frac{n_{\ce{HI}}}{V}). According to collision theory, the rate of a bimolecular collision is proportional to [HI]2[\ce{HI}]^2. Lower concentration reduces the collision frequency between HI\ce{HI} molecules, thereby reducing the rate of effective reactive collisions.

03

A chemist claims: 'Compressing a reaction vessel by halving its volume speeds up a gas reaction because total pressure doubles. Therefore, doubling the total pressure by pumping in helium gas at fixed volume must also double the reaction rate.' Identify the flaw in this reasoning and contrast the two scenarios in terms of reactant molar concentrations.

Answer

The flaw is equating an increase in total pressure caused by volume reduction with an increase caused by adding an inert gas. Halving the volume doubles the concentration of all reactants ([A]=nV/2=2[A]0[\text{A}] = \frac{n}{V/2} = 2[\text{A}]_0), which increases reactant-reactant collision frequency and accelerates the rate. In contrast, pumping in helium at fixed volume leaves the volume unchanged, so reactant concentrations ([A]=nV[\text{A}] = \frac{n}{V}) and reactant-reactant collision frequencies remain strictly constant, leaving the reaction rate unchanged.

Loading workspace…