Resources

A rigid cylinder fitted with a frictionless piston contains pure liquid water in dynamic equilibrium with its vapor at 100.0∘C100.0^\circ\text{C} and 1.00 atm1.00\text{ atm}. A student predicts that rapidly doubling the volume of the vapor space at constant temperature will permanently halve the equilibrium vapor pressure to 0.50 atm0.50\text{ atm} in accordance with Boyle's Law. If the cylinder contains 1.00 mol1.00\text{ mol} of liquid water and 0.0500 mol0.0500\text{ mol} of steam initially in a vapor volume of 1.53 L1.53\text{ L}, and the volume is expanded isothermally to 3.06 L3.06\text{ L}, calculate the final system pressure in atm\text{atm} and the net number of moles of liquid water that must evaporate to re-establish dynamic equilibrium.

Answer and steps

Final answer

Final pressure: 1.00 atm1.00\text{ atm}; Moles evaporated: 0.0500 mol0.0500\text{ mol}

Steps

01

Understanding Vapor Pressure in Dynamic Equilibrium

The dynamic phase equilibrium between liquid water and steam is represented by: HX2O(l)⇌HX2O(g)\ce{H2O(l) <=> H2O(g)}

The equilibrium vapor pressure of a pure substance depends exclusively on temperature. As long as liquid water is present, the system will adjust the amount of vapor to restore the equilibrium vapor pressure at that temperature. At 100.0∘C100.0^\circ\text{C}, the equilibrium vapor pressure of water is: Pvap=1.00 atmP_{\text{vap}} = 1.00\text{ atm}

Common Pitfall: Boyle's Law (P1V1=P2V2P_1V_1 = P_2V_2) applies only to a fixed mass of gas (n=constantn = \text{constant}). When liquid is present in equilibrium with its vapor, the number of moles of gas can change via evaporation or condensation, so Boyle's Law does not describe the final equilibrium state.


02

Final System Pressure

When the volume of the vapor space is expanded from 1.53 L1.53\text{ L} to 3.06 L3.06\text{ L}, the pressure momentarily drops below 1.00 atm1.00\text{ atm}. Because the rate of evaporation now exceeds the rate of condensation, additional liquid water evaporates until the vapor pressure returns to the equilibrium value of 1.00 atm1.00\text{ atm}, provided there is sufficient liquid water remaining.

Since the initial quantity of liquid water is 1.00 mol1.00\text{ mol}, which is far greater than the small amount needed to replenish the vapor, liquid remains in the cylinder.

Therefore: Final pressure=1.00 atm\text{Final pressure} = 1.00\text{ atm}


03

Calculating the Moles of Water Evaporated

At constant temperature (TT) and pressure (PP), the ideal gas equation relates the number of moles of gas directly to volume: n=PVRTn = \frac{PV}{RT}

Since both PP and TT are constant at equilibrium: n1V1=n2V2\frac{n_1}{V_1} = \frac{n_2}{V_2}

Substitute the given values to find the final moles of vapor, n2n_2: n2=n1⋅(V2V1)=0.0500 mol⋅(3.06 L1.53 L)=0.0500 mol⋅2=0.1000 moln_2 = n_1 \cdot \left(\frac{V_2}{V_1}\right) = 0.0500\text{ mol} \cdot \left(\frac{3.06\text{ L}}{1.53\text{ L}}\right) = 0.0500\text{ mol} \cdot 2 = 0.1000\text{ mol}

The net moles of liquid water that must evaporate (Δnevap\Delta n_{\text{evap}}) is the change in the number of moles of vapor: Δnevap=n2−n1=0.1000 mol−0.0500 mol=0.0500 mol\Delta n_{\text{evap}} = n_2 - n_1 = 0.1000\text{ mol} - 0.0500\text{ mol} = 0.0500\text{ mol}

Since 0.0500 mol<1.00 mol0.0500\text{ mol} < 1.00\text{ mol}, sufficient liquid remains (1.00−0.0500=0.95 mol1.00 - 0.0500 = 0.95\text{ mol}), confirming that dynamic equilibrium is successfully re-established.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies Boyle's Law to a liquid-vapor equilibrium system, concluding that doubling the volume permanently halves the pressure to 0.50 atm and that no evaporation occurs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P1V1=P2V2  ⟹  P2=(1.00 atm)(1.53 L)3.06 L=0.50 atmP_1 V_1 = P_2 V_2 \implies P_2 = \frac{(1.00\text{ atm})(1.53\text{ L})}{3.06\text{ L}} = 0.50\text{ atm}

    Correct

    Pfinal=Pvap(100.0∘C)=1.00 atmP_{\text{final}} = P_{\text{vap}}(100.0^\circ\text{C}) = 1.00\text{ atm}

    You applied Boyle's Law as if the vapor were a closed gas system with a constant number of moles. However, vapor pressure depends solely on temperature as long as liquid phase remains. When the volume expands, water evaporates until the vapor pressure returns to 1.00 atm1.00\text{ atm}.

  2. Step 2

    Because gas expands according to Boyle’s Law, moles of gas remain constant.  ⟹  Δn=0 mol\text{Because gas expands according to Boyle's Law, moles of gas remain constant.} \implies \Delta n = 0\text{ mol}

    Correct

    n2=n1⋅V2V1=0.0500 mol×2=0.1000 mol  ⟹  Δnevap=0.1000 mol−0.0500 mol=0.0500 moln_2 = n_1 \cdot \frac{V_2}{V_1} = 0.0500\text{ mol} \times 2 = 0.1000\text{ mol} \implies \Delta n_{\text{evap}} = 0.1000\text{ mol} - 0.0500\text{ mol} = 0.0500\text{ mol}

    You assumed that the number of moles of gas cannot change during expansion. Because the initial drop in pressure disrupts dynamic equilibrium, liquid water evaporates until equilibrium vapor pressure is restored, adding 0.0500 mol0.0500\text{ mol} of gas.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up and solved the algebraic form of Boyle's Law for an isothermal expansion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
misapplication of Boyle's Law to phase equilibrium

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a two-phase liquid-vapor equilibrium system as a single-phase gas system with fixed mass, overlooking that equilibrium vapor pressure is an intensive property determined solely by temperature when liquid is present.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant Temperature Implies Constant Vapor Pressure
  • For any pure substance in dynamic liquid-vapor equilibrium, the equilibrium vapor pressure PvapP_{\text{vap}} depends only on temperature TT.

  • Check whether liquid is still present after expansion; if liquid remains, the equilibrium pressure must return to Pvap(T)P_{\text{vap}}(T).

Phase Equilibrium Adjusts Gas Moles
  • Boyle's Law (P1V1=P2V2P_1V_1 = P_2V_2) strictly requires nn to remain constant. In a liquid-vapor system, HX2O(l)⇌HX2O(g)\ce{H2O(l) <=> H2O(g)} shifts to restore equilibrium.

  • Use n=PVRTn = \frac{PV}{RT} at constant PP and TT to find the new moles of vapor required to fill the expanded volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that liquid water (1.00 mol1.00\text{ mol}) is present, so the final equilibrium pressure must equal the vapor pressure of water at 100.0∘C100.0^\circ\text{C}, which is Pfinal=1.00 atmP_{\text{final}} = 1.00\text{ atm}.

  2. Calculate the required final moles of vapor using the ideal gas relationship at constant TT and PP: n_2 = n_1 \cdot \left(\frac{V_2}{V_1}\right) = 0.0500\text{ mol} \cdot \left(\frac{3.06\text{ L}}{1.53\text{ L}} ight) = 0.1000\text{ mol}.

  3. Determine the net moles of water that evaporated: Δnevap=n2−n1=0.1000 mol−0.0500 mol=0.0500 mol\Delta n_{\text{evap}} = n_2 - n_1 = 0.1000\text{ mol} - 0.0500\text{ mol} = 0.0500\text{ mol}.

  4. Verify that sufficient liquid water was available: 0.0500 mol<1.00 mol0.0500\text{ mol} < 1.00\text{ mol}, leaving 0.95 mol0.95\text{ mol} of liquid.

Final answer

Final pressure: 1.00 atm1.00\text{ atm}; Moles evaporated: 0.0500 mol0.0500\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify whether a liquid phase is present before applying gas laws like Boyle's Law.

  • Remember that Le Chatelier's principle drives evaporation when vapor space increases, keeping vapor pressure constant as long as liquid remains.

OverviewACEpath Teacher's Diagnosis

02 The student correctly determines that the final equilibrium pressure returns to 1.00 atm, but calculates the final moles of vapor instead of subtracting the initial moles to find the net moles evaporated.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Vapor pressure depends only on temperature, so PP remains 1.00 atm1.00\text{ atm}.

  2. Step 2

    nfinal=(1.00 atm)(3.06 L)R×373.15 K=0.100 moln_{\text{final}} = \frac{(1.00\text{ atm})(3.06\text{ L})}{R \times 373.15\text{ K}} = 0.100\text{ mol}

  3. Step 3

    Net evaporated=0.100 mol\text{Net evaporated} = 0.100\text{ mol}

    Correct

    Δnevap=nfinal−ninitial=0.100 mol−0.0500 mol=0.0500 mol\Delta n_{\text{evap}} = n_{\text{final}} - n_{\text{initial}} = 0.100\text{ mol} - 0.0500\text{ mol} = 0.0500\text{ mol}

    You reported the total final moles of steam rather than finding the net moles that evaporated. Since the system already contained 0.0500 mol0.0500\text{ mol} of steam before the expansion, you must subtract the initial vapor from the final vapor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that equilibrium vapor pressure is temperature-dependent and remains constant at 1.00 atm1.00\text{ atm}.

You correctly used the ideal gas law to determine the total moles of gas in the final volume.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Total Quantity with Net Change

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the total quantity of vapor present at final equilibrium (nfinaln_{\text{final}}) with the net change in vapor produced by phase change (Δn=nfinal−ninitial\Delta n = n_{\text{final}} - n_{\text{initial}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
State vs. Process Distinction
  • Net change (amount produced or consumed) always equals Δn=nfinal−ninitial\Delta n = n_{\text{final}} - n_{\text{initial}}, not the final amount nfinaln_{\text{final}}.

  • Check whether the vapor space already contained gas before the expansion, and subtract ninitialn_{\text{initial}} from nfinaln_{\text{final}} to obtain the net moles evaporated.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify initial vapor amount from the problem statement: ninitial=0.0500 moln_{\text{initial}} = 0.0500\text{ mol}.

  2. Calculate net moles evaporated: Δnevap=nfinal−ninitial=0.100 mol−0.0500 mol=0.0500 mol\Delta n_{\text{evap}} = n_{\text{final}} - n_{\text{initial}} = 0.100\text{ mol} - 0.0500\text{ mol} = 0.0500\text{ mol}.

Final answer

Final pressure: 1.00 atm1.00\text{ atm}; Moles evaporated: 0.0500 mol0.0500\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever a problem asks for an amount that has evaporated, reacted, or changed, explicitly write down Δn=n2−n1\Delta n = n_2 - n_1 before substituting numbers.

  • Highlight the initial quantity of vapor given in the problem text so it is not overlooked during final calculations.

Lock it in

Similar question

01

A closed 2.0 L2.0\text{ L} cylinder contains 0.50 mol0.50\text{ mol} of liquid ethanol and ethanol vapor in dynamic equilibrium at 20∘C20^\circ\text{C} with a vapor pressure of 44 mmHg44\text{ mmHg}. If the cylinder's volume is isothermally compressed to 1.0 L1.0\text{ L} such that liquid remains, what is the final pressure of the ethanol vapor?

Answer

44 mmHg44\text{ mmHg}. Because temperature is constant and liquid ethanol remains present, the equilibrium vapor pressure remains unchanged; excess vapor condenses into liquid.

02

A 5.00 L5.00\text{ L} sealed vessel contains 0.200 mol0.200\text{ mol} of steam in equilibrium with liquid water at 100.0∘C100.0^\circ\text{C} (1.00 atm1.00\text{ atm}). The volume is expanded isothermally to 15.00 L15.00\text{ L}. Assuming sufficient liquid water is present, calculate the net moles of water that must evaporate to re-establish equilibrium.

Answer

0.400 mol0.400\text{ mol}. At constant TT and PP, n∝Vn \propto V. The final moles of vapor are n2=n1×(15.00 L5.00 L)=0.200 mol×3=0.600 moln_2 = n_1 \times \left(\frac{15.00\text{ L}}{5.00\text{ L}}\right) = 0.200\text{ mol} \times 3 = 0.600\text{ mol}. The moles evaporated are Δn=0.600 mol−0.200 mol=0.400 mol\Delta n = 0.600\text{ mol} - 0.200\text{ mol} = 0.400\text{ mol}.

03

A cylinder at 100.0∘C100.0^\circ\text{C} contains 0.0100 mol0.0100\text{ mol} of liquid water and 0.0200 mol0.0200\text{ mol} of steam at 1.00 atm1.00\text{ atm} in a volume of 0.612 L0.612\text{ L}. The piston is pulled out isothermally until the volume is 1.836 L1.836\text{ L} (a threefold expansion). Determine whether liquid remains at final equilibrium, and calculate the final pressure in atm\text{atm}.

Answer

No liquid remains; final pressure is 0.500 atm0.500\text{ atm}. To maintain 1.00 atm1.00\text{ atm} across 1.836 L1.836\text{ L}, the vapor requires n2=0.0200 mol×3=0.0600 moln_2 = 0.0200\text{ mol} \times 3 = 0.0600\text{ mol}. That would require evaporating 0.0400 mol0.0400\text{ mol} of liquid, but only 0.0100 mol0.0100\text{ mol} is available. Thus all liquid evaporates, giving ntotal=0.0300 moln_{\text{total}} = 0.0300\text{ mol} of gas. By the ideal gas law (or Boyle's law from full vaporization), P=1.00 atm×(0.03000.0600)=0.500 atmP = 1.00\text{ atm} \times \left(\frac{0.0300}{0.0600}\right) = 0.500\text{ atm}.

Loading workspace…