Resources
A student mixes of with of at . The reaction yields an insoluble precipitate according to the net ionic equation: . (a) Classify the combined mixture after precipitation occurs as homogeneous or heterogeneous. (b) Determine the limiting reactant and calculate the theoretical yield of solid lead(II) chloride precipitate in grams (molar mass of ).
Answer and steps
Final answer
(a) Heterogeneous mixture; (b) Limiting reactant is (from ), and theoretical yield of is .
Steps
Calculate the initial moles of reacting ions
Part (a): Classifying the Mixture
A homogeneous mixture consists of a single uniform phase with the same composition and properties throughout (such as an aqueous solution with completely dissolved solutes). A heterogeneous mixture contains two or more distinct phases with boundaries between them. When the precipitation reaction occurs, solid lead(II) chloride () forms within the aqueous solution: Because the resulting system consists of both a solid phase ( precipitate) and a liquid phase (the remaining aqueous solution), the mixture does not have a uniform composition throughout. Therefore, it is classified as a heterogeneous mixture.
Part (b): Determining the Limiting Reactant and Theoretical Yield
Convert the volume from milliliters to liters () and multiply by molarity:
- For ions from :
- For ions from :
Identify the limiting reactant
According to the balanced net ionic equation, of requires of .
Calculate the amount of that each reactant could theoretically produce:
- From :
- From :
Since produces fewer moles of precipitate, (from ) is the limiting reactant.
Pitfall: Do not simply compare the initial mole quantities ( vs. ) to determine the limiting reactant. You must account for the stoichiometric ratio from the balanced chemical equation.
Calculate the theoretical yield in grams
Using the moles determined by the limiting reactant () and the molar mass of ():
Rounded to three significant figures, the theoretical yield of is .
Typical errors
01 The student ignores the 1:2 stoichiometric coefficient between Pb²⁺ and Cl⁻ and assumes a 1:1 mole ratio to determine the limiting reactant and product moles.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Heterogeneous mixture because solid precipitate is present with the liquid solution.
- Step 2
- Step 3
, so is limiting reactant
Correct. Since , (from ) is the limiting reactant.
You compared the initial moles directly () as if they reacted in a ratio. Because the reaction requires for every , needs . Since only is available, runs out first.
- Step 4Correct
Your molar mass multiplication was carried out properly, but because it relied on the incorrect limiting reactant from Step 3, the final yield value is incorrect.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly classified the post-reaction system as a heterogeneous mixture based on the presence of two distinct phases.
You correctly converted milliliters to liters and computed the initial moles of and .
You used the correct formula to convert moles of precipitate into grams.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed a stoichiometric relationship between reactants when comparing initial mole amounts, overlooking that the coefficient of for halves the amount of product it can form.
REASONING PATH
Your ACEpath teacher’s suggested approach- Divide by Coefficients or Compare Product Moles
For a reaction , the limiting reactant is the one with the smaller value of , not simply the smaller value of .
Always divide each reactant's moles by its stoichiometric coefficient before comparing, or calculate the moles of product each reactant could individually yield.
CORRECTED PATH
ACEpath Teacher's DemonstrationDetermine potential moles of produced by each reactant using the stoichiometric coefficients: from , ; from , .
Compare the product amounts: since , (from ) is the limiting reactant and determines the maximum product formed.
Calculate the theoretical mass of : .
(a) Heterogeneous mixture; (b) Limiting reactant is (from ), theoretical yield of is .
02 The student compares molarities directly without accounting for stoichiometry to identify the limiting reactant.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
, . Since , is the limiting reactant.
You compared the solution molarities directly instead of comparing the available moles scaled by their stoichiometric coefficients. The reaction requires for every , making (from ) run out first.
- Step 3Correct
Your conversion of moles to grams was mathematically sound, but because it relied on the incorrectly identified limiting reactant, the calculated theoretical yield was overstated.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the mixture as heterogeneous and provided sound reasoning based on the presence of a solid precipitate in liquid.
You accurately calculated the initial moles of lead(II) ions from volume and molarity.
You properly applied the molar mass conversion to convert moles of product to grams.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated reactant concentration alone as the decisive factor for limiting reactant identity without converting concentrations to moles and dividing by the stoichiometric coefficients from the balanced net ionic equation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Convert to Moles First
Reactant comparisons must always be based on amount in moles (), not raw concentrations.
Always multiply the volume (in liters) by molarity for each reactant before comparing quantities.
- Account for Reaction Stoichiometry
The limiting reactant is the one that gives the smallest value of .
Divide the initial moles of each reactant by its stoichiometric coefficient in the balanced equation, then choose the smallest quotient.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate initial moles: and .
Determine theoretical product from each reactant: , while .
Identify limiting reactant: Since produces fewer moles of precipitate, (from ) is limiting.
Calculate mass: .
(a) Heterogeneous mixture; (b) Limiting reactant is (from ), and theoretical yield of is .
03 The student correctly identifies Cl⁻ as limiting but forgets to divide the moles of Cl⁻ by 2 when determining the moles of PbCl2 formed.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
According to the balanced net ionic equation , of produces only of . You set the moles of precipitate directly equal to the moles of instead of dividing by .
- Step 5Correct
Your molar mass multiplication was set up correctly, but your result is twice the correct theoretical yield due to the incorrect mole value carried over from Step 4.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly explained why the resulting mixture is heterogeneous based on the formation of two distinct phases.
You calculated the initial moles of both lead(II) and chloride ions without error.
You successfully determined the limiting reactant by comparing the required mole ratios.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou recognized the ratio when comparing reactants, but you treated the conversion from to as a ratio.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisFailing to write explicit mole-ratio conversion factors when transitioning from the limiting reactant to the product.
REASONING PATH
Your ACEpath teacher’s suggested approach- Stoichiometric Product Ratio
Always multiply the moles of limiting reactant by the ratio: .
Write out the full unit factor before calculating mass.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) Heterogeneous mixture; (b) Limiting reactant is (from ), theoretical yield is .
Lock it in
Why is the reactant with fewer moles NOT necessarily the limiting reactant in a chemical reaction?
Reactants combine according to stoichiometric ratios, not a mole ratio. A reactant with more initial moles can still run out first if its balanced coefficient requires it to be consumed much faster.
Similar question
A solution containing is mixed with a solution containing . The precipitation reaction is ? No, the net ionic equation is . If you start with and , determine the limiting reactant and the maximum moles of produced.
Answer
Limiting reactant: ; maximum yield: . Key steps: Calculate product from each reactant: from , ; from , . Since , is limiting.
You mix of with of . The reaction is . (a) Classify the mixture after precipitation. (b) Identify the limiting reactant and calculate the theoretical yield of in grams (molar mass ).
Answer
(a) Heterogeneous mixture. (b) Limiting reactant is (from ); theoretical yield . Key steps: ; . Moles of from ; from . Mass .
A chemist reacts of with of . The balanced molecular equation is . Determine the limiting reactant and calculate the mass of barium phosphate precipitate formed (molar mass of ).
Answer
Limiting reactant: both are present in exact stoichiometric proportions (neither is in excess); theoretical yield . Key steps: ; . Test ratios: and . Moles of . Mass .