Resources

A physical chemistry lab group tests whether the thermal decomposition of compound A\text{A} follows an elementary unimolecular model or a bimolecular collision model. The group measures the concentration of A\text{A} over time at 350 K350\text{ K} and constructs two linear regression plots: Model 1 plots ln⁡[A]\ln[\text{A}] versus time tt (in seconds), yielding y=−0.0125x−0.916y = -0.0125x - 0.916 with R2=0.912R^2 = 0.912. Model 2 plots 1[A]\frac{1}{[\text{A}]} (in M−1\text{M}^{-1}) versus time tt (in seconds), yielding y=0.175x+2.50y = 0.175x + 2.50 with R2=0.999R^2 = 0.999. Based on the superior linearity of Model 2, calculate the target reaction half-life t1/2t_{1/2} (in seconds) for an initial concentration of [A]0=0.400 M[\text{A}]_0 = 0.400\text{ M}, and determine the percentage error in t1/2t_{1/2} that would have resulted from mistakenly adopting Model 1 (using k1=0.0125 s−1k_1 = 0.0125\text{ s}^{-1}).

Answer and steps

Final answer

Model 2 (second-order kinetics with k=0.175 M−1⋅s−1k = 0.175\text{ M}^{-1}\cdot\text{s}^{-1}) is the correct model based on R2=0.999R^2 = 0.999. The true target half-life is t1/2=1k[A]0=1(0.175 M−1⋅s−1)(0.400 M)=14.3 st_{1/2} = \frac{1}{k[\text{A}]_0} = \frac{1}{(0.175\text{ M}^{-1}\cdot\text{s}^{-1})(0.400\text{ M})} = 14.3\text{ s}. The erroneous first-order half-life from Model 1 would be t1/2=ln⁡20.0125 s−1=55.5 st_{1/2} = \frac{\ln 2}{0.0125\text{ s}^{-1}} = 55.5\text{ s}. The percentage error is 55.5 s−14.3 s14.3 s×100%=+288%\frac{55.5\text{ s} - 14.3\text{ s}}{14.3\text{ s}} \times 100\% = +288\%.

Steps

01

Select the Correct Kinetic Model Based on Linearity

The integrated rate laws for unimolecular (first-order) and bimolecular (second-order) processes are:

  • First-order (Model 1): ln⁡[A]=−k1t+ln⁡[A]0\ln[\ce{A}] = -k_1 t + \ln[\ce{A}]_0
  • Second-order (Model 2): 1[A]=k2t+1[A]0\frac{1}{[\ce{A}]} = k_2 t + \frac{1}{[\ce{A}]_0}

Comparing the coefficients of determination:

  • Model 1 yields R2=0.912R^2 = 0.912.
  • Model 2 yields R2=0.999R^2 = 0.999.

Because R2R^2 is much closer to 11 for Model 2, the decomposition of A\ce{A} follows second-order kinetics. The slope of the regression line gives the second-order rate constant: k=0.175 M−1⋅s−1k = 0.175\text{ M}^{-1}\cdot\text{s}^{-1}


02

Calculate the True Half-Life Using Model 2

For a second-order reaction, the half-life depends inversely on the initial reactant concentration: t1/2=1k[A]0t_{1/2} = \frac{1}{k[\ce{A}]_0}

Substitute k=0.175 M−1⋅s−1k = 0.175\text{ M}^{-1}\cdot\text{s}^{-1} and [A]0=0.400 M[\ce{A}]_0 = 0.400\text{ M}: t1/2=1(0.175 M−1⋅s−1)(0.400 M)=10.0700 s−1≈14.3 st_{1/2} = \frac{1}{(0.175\text{ M}^{-1}\cdot\text{s}^{-1})(0.400\text{ M})} = \frac{1}{0.0700\text{ s}^{-1}} \approx 14.3\text{ s}


03

Calculate the Erroneous Half-Life Using Model 1

If the reaction were incorrectly assumed to be first-order, the half-life would be independent of concentration: t1/2, err=ln⁡2k1t_{1/2,\text{ err}} = \frac{\ln 2}{k_1}

Using the slope from Model 1 (k1=0.0125 s−1k_1 = 0.0125\text{ s}^{-1}): t1/2, err=0.693150.0125 s−1≈55.5 st_{1/2,\text{ err}} = \frac{0.69315}{0.0125\text{ s}^{-1}} \approx 55.5\text{ s}

Common Pitfall: Assuming first-order kinetics whenever half-life is mentioned. While first-order half-life is constant regardless of initial concentration (ln⁡2k\frac{\ln 2}{k}), second-order half-life increases as the initial concentration decreases (1k[A]0\frac{1}{k[\ce{A}]_0}).


04

Determine the Percentage Error

The percentage error resulting from choosing Model 1 over the true Model 2 is: Percentage Error=t1/2, err−t1/2, truet1/2, true×100%\text{Percentage Error} = \frac{t_{1/2,\text{ err}} - t_{1/2,\text{ true}}}{t_{1/2,\text{ true}}} \times 100\%

Percentage Error=55.5 s−14.3 s14.3 s×100%=41.2 s14.3 s×100%≈+288%\text{Percentage Error} = \frac{55.5\text{ s} - 14.3\text{ s}}{14.3\text{ s}} \times 100\% = \frac{41.2\text{ s}}{14.3\text{ s}} \times 100\% \approx +288\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misremembers the second-order half-life formula as t₁/₂ = [A]₀ / (2k) (the zero-order formula), leading to an incorrect target half-life and incorrect percentage error.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Model 2 is second order with k2=0.175 M−1 s−1k_2 = 0.175\text{ M}^{-1}\text{ s}^{-1}

  2. Step 2

    t1/2=[A]02k2=0.4002×0.175=1.14 st_{1/2} = \frac{[\text{A}]_0}{2k_2} = \frac{0.400}{2 \times 0.175} = 1.14\text{ s}

    Correct

    t1/2=1k2[A]0=1(0.175)(0.400)=14.3 st_{1/2} = \frac{1}{k_2[\text{A}]_0} = \frac{1}{(0.175)(0.400)} = 14.3\text{ s}

    You applied the zero-order half-life expression t1/2=[A]02kt_{1/2} = \frac{[\text{A}]_0}{2k}. For a second-order reaction, the half-life is inversely proportional to initial concentration: t1/2=1k[A]0t_{1/2} = \frac{1}{k[\text{A}]_0}.

  3. Step 3

    Model 1 gives t1/2=ln⁡(2)k1=0.6930.0125=55.45 st_{1/2} = \frac{\ln(2)}{k_1} = \frac{0.693}{0.0125} = 55.45\text{ s}

  4. Step 4

    Percentage error = (55.45−1.141.14)×100%=4764%\left(\frac{55.45 - 1.14}{1.14}\right) \times 100\% = 4764\%

    Correct

    Percentage error = 55.5−14.314.3×100%≈+288%\frac{55.5 - 14.3}{14.3} \times 100\% \approx +288\%

    Your percentage error formula was set up correctly, but your numerical result was affected by the incorrect value of t1/2t_{1/2} from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You evaluated the regression R2R^2 values correctly to choose the second-order model.

You extracted the rate constants accurately from the linear regression slopes.

You used the correct first-order half-life formula and percentage error definition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong formula selection: zero-order vs. second-order half-life

You recalled t1/2=[A]02kt_{1/2} = \frac{[\text{A}]_0}{2k} instead of t1/2=1k[A]0t_{1/2} = \frac{1}{k[\text{A}]_0}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the integrated rate law half-life relationships across different reaction orders, specifically substituting the zero-order formula (where half-life is directly proportional to initial concentration) for the second-order formula (where half-life is inversely proportional to initial concentration).

REASONING PATH
Your ACEpath teacher’s suggested approach
Half-life concentration dependence
  • Zero order: t1/2=[A]02kt_{1/2} = \frac{[\text{A}]_0}{2k}; First order: t1/2=ln⁡2kt_{1/2} = \frac{\ln 2}{k}; Second order: t1/2=1k[A]0t_{1/2} = \frac{1}{k[\text{A}]_0}.

  • Derive or verify the half-life by setting [A]=[A]02[\text{A}] = \frac{[\text{A}]_0}{2} into the corresponding integrated rate law 1[A]−1[A]0=kt\frac{1}{[\text{A}]} - \frac{1}{[\text{A}]_0} = kt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute [A]0=0.400 M[\text{A}]_0 = 0.400\text{ M} and k2=0.175 M−1⋅s−1k_2 = 0.175\text{ M}^{-1}\cdot\text{s}^{-1} into t1/2=1k2[A]0t_{1/2} = \frac{1}{k_2[\text{A}]_0}.

  2. t1/2=1(0.175 M−1⋅s−1)(0.400 M)=10.0700 s−1≈14.3 st_{1/2} = \frac{1}{(0.175\text{ M}^{-1}\cdot\text{s}^{-1})(0.400\text{ M})} = \frac{1}{0.0700\text{ s}^{-1}} \approx 14.3\text{ s}.

  3. Compute the percentage error: 55.45 s−14.29 s14.29 s×100%=41.16 s14.29 s×100%≈+288%\frac{55.45\text{ s} - 14.29\text{ s}}{14.29\text{ s}} \times 100\% = \frac{41.16\text{ s}}{14.29\text{ s}} \times 100\% \approx +288\%.

Final answer

Target t1/2=14.3 st_{1/2} = 14.3\text{ s}, Percentage error = +288%+288\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the quick derivation of t1/2t_{1/2} from the integrated rate law for orders 00, 11, and 22.

  • Check units of t1/2t_{1/2}: for second order, 1(M−1⋅s−1)(M)=s\frac{1}{(\text{M}^{-1}\cdot\text{s}^{-1})(\text{M})} = \text{s}, confirming [A]0[\text{A}]_0 belongs in the denominator.

OverviewACEpath Teacher's Diagnosis

02 The student normalizes percentage error by the erroneous Model 1 value in the denominator rather than the true Model 2 value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Model 2: k2=0.175 M−1s−1  ⟹  t1/2=1k2×[A]0=10.175×0.400=14.29 s\text{Model 2: } k_2 = 0.175\text{ M}^{-1}\text{s}^{-1} \implies t_{1/2} = \frac{1}{k_2 \times [\text{A}]_0} = \frac{1}{0.175 \times 0.400} = 14.29\text{ s}

  2. Step 2

    Model 1: t1/2=ln⁡(2)0.0125=55.45 s\text{Model 1: } t_{1/2} = \frac{\ln(2)}{0.0125} = 55.45\text{ s}

  3. Step 3

    Percentage error=(55.45−14.2955.45)×100%=74.2%\text{Percentage error} = \left(\frac{55.45 - 14.29}{55.45}\right) \times 100\% = 74.2\%

    Correct

    Percentage error=55.45 s−14.29 s14.29 s×100%≈+288%\text{Percentage error} = \frac{55.45\text{ s} - 14.29\text{ s}}{14.29\text{ s}} \times 100\% \approx +288\%

    You placed the erroneous Model 1 value (55.45 s55.45\text{ s}) in the denominator instead of the true accepted Model 2 value (14.29 s14.29\text{ s}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly chose the inverse-concentration half-life formula for the second-order reaction.

You correctly computed both individual half-life values with accurate intermediate rounding.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Baseline value error in percentage calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You normalized the difference by the incorrect experimental model value rather than the true theoretical benchmark. Percentage error must always be divided by the accepted true reference value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Percentage Error Baseline
  • Percentage Error=Measured/Erroneous−True/AcceptedTrue/Accepted×100%\text{Percentage Error} = \frac{\text{Measured/Erroneous} - \text{True/Accepted}}{\text{True/Accepted}} \times 100\%

  • Always identify which quantity represents the true benchmark and place only that true value in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Percentage error=t1/2, err−t1/2, truet1/2, true×100%\text{Percentage error} = \frac{t_{1/2,\text{ err}} - t_{1/2,\text{ true}}}{t_{1/2,\text{ true}}} \times 100\%

  2. Percentage error=55.45 s−14.29 s14.29 s×100%=41.16 s14.29 s×100%≈+288%\text{Percentage error} = \frac{55.45\text{ s} - 14.29\text{ s}}{14.29\text{ s}} \times 100\% = \frac{41.16\text{ s}}{14.29\text{ s}} \times 100\% \approx +288\%

Final answer

t1/2=14.3 st_{1/2} = 14.3\text{ s}; percentage error=+288%\text{percentage error} = +288\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of percentage error to ensure you always divide by the accepted reference value.

  • Practice distinguishing between percentage error (normalized to the true value) and percentage difference (normalized to an average or initial state).

OverviewACEpath Teacher's Diagnosis

03 The student omits the initial concentration [A]₀ in the second-order half-life calculation, using t₁/₂ = 1 / k₂.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    k2=0.175 M−1s−1  ⟹  t1/2=1k2=10.175=5.71 sk_2 = 0.175\text{ M}^{-1}\text{s}^{-1} \implies t_{1/2} = \frac{1}{k_2} = \frac{1}{0.175} = 5.71\text{ s}

    Correct

    t1/2=1k2[A]0=1(0.175 M−1⋅s−1)(0.400 M)=14.3 st_{1/2} = \frac{1}{k_2[\text{A}]_0} = \frac{1}{(0.175\text{ M}^{-1}\cdot\text{s}^{-1})(0.400\text{ M})} = 14.3\text{ s}

    For a second-order reaction, the half-life depends inversely on initial concentration: t1/2=1k[A]0t_{1/2} = \frac{1}{k[\text{A}]_0}. Omitting [A]0[\text{A}]_0 leaves the expression with units of M⋅s\text{M}\cdot\text{s} instead of seconds.

  2. Step 2

    t1/2=ln⁡(2)0.0125=55.45 st_{1/2} = \frac{\ln(2)}{0.0125} = 55.45\text{ s}

  3. Step 3

    Percentage error=(55.45−5.715.71)×100%=871%\text{Percentage error} = \left(\frac{55.45 - 5.71}{5.71}\right) \times 100\% = 871\%

    Correct

    Percentage error=(55.5 s−14.3 s14.3 s)×100%≈+288%\text{Percentage error} = \left(\frac{55.5\text{ s} - 14.3\text{ s}}{14.3\text{ s}}\right) \times 100\% \approx +288\%

    Your percentage error formula structure is correct, but your numerical result was affected by the incorrect value of t1/2t_{1/2} from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected and interpreted the rate constant values from both regression lines.

You accurately calculated the first-order half-life for Model 1 using t1/2=ln⁡2kt_{1/2} = \frac{\ln 2}{k}.

You correctly set up the relative percentage error formula comparing the two models.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted concentration in second-order half-life

You wrote t1/2=1k2t_{1/2} = \frac{1}{k_2} instead of t1/2=1k2[A]0t_{1/2} = \frac{1}{k_2[\text{A}]_0}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing second-order rate constant dimensions with time or overlooking the concentration dependence of second-order half-life.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Half-Life Concentration Dependence
  • Only first-order half-life is independent of initial concentration (t1/2=ln⁡2kt_{1/2} = \frac{\ln 2}{k}). Zero-order is t1/2=[A]02kt_{1/2} = \frac{[\text{A}]_0}{2k}, and second-order is t1/2=1k[A]0t_{1/2} = \frac{1}{k[\text{A}]_0}.

  • Always verify the reaction order before writing down the half-life equation.

Verify Units via Dimensional Analysis
  • Half-life must carry units of time (s\text{s}). For a second-order rate constant kk with units M−1⋅s−1\text{M}^{-1}\cdot\text{s}^{-1}, the reciprocal 1k\frac{1}{k} has units M⋅s\text{M}\cdot\text{s}.

  • Multiply kk by [A]0[\text{A}]_0 (in M\text{M}) in the denominator so that concentration cancels out and yields seconds.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate true t1/2t_{1/2} for Model 2: t1/2=1k2[A]0=1(0.175 M−1⋅s−1)(0.400 M)=10.0700 s−1≈14.3 st_{1/2} = \frac{1}{k_2[\text{A}]_0} = \frac{1}{(0.175\text{ M}^{-1}\cdot\text{s}^{-1})(0.400\text{ M})} = \frac{1}{0.0700\text{ s}^{-1}} \approx 14.3\text{ s}.

  2. Substitute into the percentage error formula: Percentage error=55.5 s−14.3 s14.3 s×100%=41.2 s14.3 s×100%≈+288%\text{Percentage error} = \frac{55.5\text{ s} - 14.3\text{ s}}{14.3\text{ s}} \times 100\% = \frac{41.2\text{ s}}{14.3\text{ s}} \times 100\% \approx +288\%.

Final answer

True t1/2=14.3 st_{1/2} = 14.3\text{ s}; Percentage error =+288%= +288\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving t1/2t_{1/2} from integrated rate laws by substituting [A]=12[A]0[\text{A}] = \frac{1}{2}[\text{A}]_0.

  • Perform a quick unit check on every calculated kinetic parameter before computing relative differences.

Lock it in

Similar question

01

A dimerization reaction follows second-order kinetics with k=0.250 M−1⋅s−1k = 0.250\text{ M}^{-1}\cdot\text{s}^{-1}. If the initial concentration of monomer is 0.200 M0.200\text{ M}, calculate the time required for half of the monomer to react.

Answer

t1/2=1k[A]0=1(0.250 M−1⋅s−1)(0.200 M)=10.0500 s−1=20.0 st_{1/2} = \frac{1}{k[\text{A}]_0} = \frac{1}{(0.250\text{ M}^{-1}\cdot\text{s}^{-1})(0.200\text{ M})} = \frac{1}{0.0500\text{ s}^{-1}} = 20.0\text{ s}.

02

The decomposition of NOX2\ce{NO2} is second order with k=0.543 M−1⋅s−1k = 0.543\text{ M}^{-1}\cdot\text{s}^{-1} at 300∘C300^\circ\text{C}. Compare the first half-life ([NOX2]0=0.100 M[\ce{NO2}]_0 = 0.100\text{ M}) to the second half-life (time from 0.050 M0.050\text{ M} to 0.025 M0.025\text{ M}).

Answer

First half-life: t1/2,1=1(0.543)(0.100)≈18.4 st_{1/2,1} = \frac{1}{(0.543)(0.100)} \approx 18.4\text{ s}. Second half-life starts at 0.050 M0.050\text{ M}: t1/2,2=1(0.543)(0.050)≈36.8 st_{1/2,2} = \frac{1}{(0.543)(0.050)} \approx 36.8\text{ s}. The second half-life is exactly double the first.

03

An experiment yields linear data for both ln⁡[B]\ln[\text{B}] vs tt (R2=0.940R^2 = 0.940, slope =−0.0200 s−1= -0.0200\text{ s}^{-1}) and 1[B]\frac{1}{[\text{B}]} vs tt (R2=0.998R^2 = 0.998, slope =0.0800 M−1⋅s−1= 0.0800\text{ M}^{-1}\cdot\text{s}^{-1}). For [B]0=0.250 M[\text{B}]_0 = 0.250\text{ M}, determine the true half-life and the percentage error if the first-order fit had been used.

Answer

True model is second order (R2=0.998R^2 = 0.998): t1/2,true=1(0.0800)(0.250)=50.0 st_{1/2,\text{true}} = \frac{1}{(0.0800)(0.250)} = 50.0\text{ s}. Erroneous first-order: t1/2,err=ln⁡20.0200=34.66 st_{1/2,\text{err}} = \frac{\ln 2}{0.0200} = 34.66\text{ s}. Percentage error: 34.66−50.050.0×100%=−30.7%\frac{34.66 - 50.0}{50.0} \times 100\% = -30.7\%.

Loading workspace…