Resources

A standard laboratory protocol synthesizes tert-butyl chloride via the nucleophilic substitution: (CH3)3COH+HCl→(CH3)3CCl+H2O(\text{CH}_3)_3\text{COH} + \text{HCl} \rightarrow (\text{CH}_3)_3\text{CCl} + \text{H}_2\text{O}. A chemist uses 14.82 g14.82\text{ g} of tert-butanol (molar mass 74.12 g/mol74.12\text{ g/mol}) and 30.00 mL30.00\text{ mL} of concentrated aqueous hydrochloric acid (37.0% w/w37.0\%\text{ w/w}, density 1.19 g/mL1.19\text{ g/mL}, molar mass HCl=36.46 g/mol\text{HCl} = 36.46\text{ g/mol}) to obtain 15.74 g15.74\text{ g} of pure tert-butyl chloride (molar mass 92.57 g/mol92.57\text{ g/mol}). A student mistakenly calculates the theoretical yield by assuming HCl\text{HCl} is the limiting reactant based solely on the raw mass of pure HCl\text{HCl} versus the mass of alcohol. Identify the true limiting reactant by comparing molar quantities, and calculate the true Reaction Mass Efficiency (RME) of this synthesis, defined as (mass of desired product/total mass of core stoichiometric reactants input)×100%(\text{mass of desired product} / \text{total mass of core stoichiometric reactants input}) \times 100\% (excluding aqueous water in the acid), to three significant figures.

Answer and steps

Final answer

Limiting reactant is (CH3)3COH(\text{CH}_3)_3\text{COH}; RME=56.2%\text{RME} = 56.2\%

Steps

01

Calculate the Molar Amount of tert-Butanol

The balanced chemical equation for the substitution is: (CHX3)X3COH+HCl→(CHX3)X3CCl+HX2O\ce{(CH3)3COH + HCl -> (CH3)3CCl + H2O}

The reaction has a 1:11:1 stoichiometric ratio between tert-butanol and hydrochloric acid.

Determine the moles of tert-butanol: n(CHX3)X3COH=mM=14.82 g74.12 g/mol=0.2000 moln_{\ce{(CH3)3COH}} = \frac{m}{M} = \frac{14.82\text{ g}}{74.12\text{ g/mol}} = 0.2000\text{ mol}


02

Calculate the Mass and Moles of Pure HCl\ce{HCl}

First, calculate the total mass of the concentrated hydrochloric acid solution from its volume and density: msolution=V⋅ρ=30.00 mL⋅1.19 g/mL=35.70 gm_{\text{solution}} = V \cdot \rho = 30.00\text{ mL} \cdot 1.19\text{ g/mL} = 35.70\text{ g}

Next, find the mass of pure HCl\ce{HCl} based on the mass percentage (37.0%37.0\%): mHCl=35.70 g⋅0.370=13.209 gm_{\ce{HCl}} = 35.70\text{ g} \cdot 0.370 = 13.209\text{ g}

Now, convert this mass into moles: nHCl=13.209 g36.46 g/mol≈0.3623 moln_{\ce{HCl}} = \frac{13.209\text{ g}}{36.46\text{ g/mol}} \approx 0.3623\text{ mol}


03

Identify the Limiting Reactant

  • Common Pitfall: Reactants react mole-for-mole, not gram-for-gram. Although the mass of pure HCl\ce{HCl} (13.209 g13.209\text{ g}) is smaller than the mass of tert-butanol (14.82 g14.82\text{ g}), HCl\ce{HCl} has a much lower molar mass (36.46 g/mol36.46\text{ g/mol} vs. 74.12 g/mol74.12\text{ g/mol}).

Comparing the molar quantities: n(CHX3)X3COH=0.2000 mol<nHCl=0.3623 moln_{\ce{(CH3)3COH}} = 0.2000\text{ mol} < n_{\ce{HCl}} = 0.3623\text{ mol}

Because the stoichiometric ratio is 1:11:1 and fewer moles of tert-butanol are available, (CHX3)X3COH\ce{(CH3)3COH} is the limiting reactant.


04

Calculate the Reaction Mass Efficiency (RME)

Reaction Mass Efficiency (RME\text{RME}) evaluates green synthesis metrics by comparing the mass of the isolated desired product to the total mass of stoichiometric reactants fed into the reaction: RME=(mdesired productmreactants input)×100%\text{RME} = \left(\frac{m_{\text{desired product}}}{m_{\text{reactants input}}}\right) \times 100\%

Sum the masses of the active chemical reactants (excluding the aqueous solvent water present in the acid): mreactants input=m(CHX3)X3COH+mHCl=14.82 g+13.209 g=28.029 gm_{\text{reactants input}} = m_{\ce{(CH3)3COH}} + m_{\ce{HCl}} = 14.82\text{ g} + 13.209\text{ g} = 28.029\text{ g}

Substitute the mass of isolated tert-butyl chloride (15.74 g15.74\text{ g}): RME=(15.74 g28.029 g)×100%≈56.156%≈56.2%\text{RME} = \left(\frac{15.74\text{ g}}{28.029\text{ g}}\right) \times 100\% \approx 56.156\% \approx 56.2\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student includes the total mass of the aqueous hydrochloric acid solution rather than pure HCl in the denominator when calculating Reaction Mass Efficiency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(tert-butanol)=14.82 g/74.12 g/mol=0.2000 moln(\text{tert-butanol}) = 14.82\text{ g} / 74.12\text{ g/mol} = 0.2000\text{ mol}

  2. Step 2

    m(HCl solution)=30.00 mL×1.19 g/mL=35.70 g  ⟹  m(pure HCl)=35.70 g×0.370=13.21 g  ⟹  n(HCl)=13.21 g/36.46 g/mol=0.3623 molm(\ce{HCl}\text{ solution}) = 30.00\text{ mL} \times 1.19\text{ g/mL} = 35.70\text{ g} \implies m(\text{pure }\ce{HCl}) = 35.70\text{ g} \times 0.370 = 13.21\text{ g} \implies n(\ce{HCl}) = 13.21\text{ g} / 36.46\text{ g/mol} = 0.3623\text{ mol}

  3. Step 3

    0.2000 mol<0.3623 mol0.2000\text{ mol} < 0.3623\text{ mol}, so tert-butanol is the limiting reactant

  4. Step 4

    m(reactants)=14.82 g+35.70 g=50.52 gm(\text{reactants}) = 14.82\text{ g} + 35.70\text{ g} = 50.52\text{ g}

    Correct

    mreactants input=m(CHX3)X3COH+mHCl=14.82 g+13.209 g=28.029 gm_{\text{reactants input}} = m_{\ce{(CH3)3COH}} + m_{\ce{HCl}} = 14.82\text{ g} + 13.209\text{ g} = 28.029\text{ g}

    You added the entire mass of the aqueous acid solution (35.70 g35.70\text{ g}) instead of the mass of pure reactant HCl\ce{HCl} (13.21 g13.21\text{ g}). Reaction Mass Efficiency considers the mass of active stoichiometric reactants, excluding the solvent water present in the reagent solution.

  5. Step 5

    RME=(15.74 g/50.52 g)×100%=31.2%\text{RME} = (15.74\text{ g} / 50.52\text{ g}) \times 100\% = 31.2\%

    Correct

    RME=(15.74 g28.029 g)×100%≈56.2%\text{RME} = \left(\frac{15.74\text{ g}}{28.029\text{ g}}\right) \times 100\% \approx 56.2\%

    Because you used the inflated reactant mass including solvent water from Step 4, your calculated RME was smaller than the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used density and mass percent to determine both the mass and molar amount of pure HCl\ce{HCl}.

You correctly identified tert-butanol as the limiting reactant by comparing moles rather than raw masses.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reactant mass vs. solution mass confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the mass of an aqueous reagent solution with the mass of the actual stoichiometric chemical reactant in the definition of Reaction Mass Efficiency.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish active reactant mass from solution mass
  • For Reaction Mass Efficiency (RME), reactant mass includes only the chemical species that take part in the reaction stoichiometry, excluding non-participating solvents or aqueous carrier water.

  • Use mHCl=13.21 gm_{\ce{HCl}} = 13.21\text{ g} rather than msolution=35.70 gm_{\text{solution}} = 35.70\text{ g} when summing reactant masses in RME.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Sum only the pure stoichiometric reactants: mreactants input=14.82 g+13.209 g=28.029 gm_{\text{reactants input}} = 14.82\text{ g} + 13.209\text{ g} = 28.029\text{ g}.

  2. Calculate the RME using the mass of isolated tert-butyl chloride: RME=15.74 g28.029 g×100%=56.156%\text{RME} = \frac{15.74\text{ g}}{28.029\text{ g}} \times 100\% = 56.156\%.

  3. Round to three significant figures to obtain 56.2%56.2\%.

Final answer

Limiting reactant is (CH3)3COH(\text{CH}_3)_3\text{COH}; RME=56.2%\text{RME} = 56.2\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Before substituting into green chemistry metric formulas, verify whether the metric specifies core stoichiometric reactants (RME) or all mass inputs including solvents and washings (PMI).

  • Practice separating the active solute mass from carrier water when dealing with concentrated mineral acids or aqueous reagents.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to account for the 37.0% w/w concentration and treats the entire aqueous hydrochloric acid mass as pure HCl when calculating moles and RME.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n(tert-butanol)=14.82 g74.12 g/mol=0.2000 moln(\text{tert-butanol}) = \frac{14.82\text{ g}}{74.12\text{ g/mol}} = 0.2000\text{ mol}

  2. Step 2

    m(HCl)=30.00 mL×1.19 g/mL=35.70 g  ⟹  n(HCl)=35.70 g36.46 g/mol=0.9792 molm(\text{HCl}) = 30.00\text{ mL} \times 1.19\text{ g/mL} = 35.70\text{ g} \implies n(\text{HCl}) = \frac{35.70\text{ g}}{36.46\text{ g/mol}} = 0.9792\text{ mol}

    Correct

    msolution=30.00 mL×1.19 g/mL=35.70 g  ⟹  mHCl=35.70 g×0.370=13.21 g  ⟹  nHCl=13.21 g36.46 g/mol=0.3623 molm_{\text{solution}} = 30.00\text{ mL} \times 1.19\text{ g/mL} = 35.70\text{ g} \implies m_{\ce{HCl}} = 35.70\text{ g} \times 0.370 = 13.21\text{ g} \implies n_{\ce{HCl}} = \frac{13.21\text{ g}}{36.46\text{ g/mol}} = 0.3623\text{ mol}

    You calculated the total mass of the aqueous acid solution correctly, but you forgot to multiply by the 37.0% w/w37.0\%\text{ w/w} mass fraction to find the actual mass and moles of pure HCl\ce{HCl}.

  3. Step 3

    0.2000 mol<0.9792 mol0.2000\text{ mol} < 0.9792\text{ mol}, so tert-butanol is the limiting reactant

    Correct

    n(CHX3)X3COH=0.2000 mol<nHCl=0.3623 moln_{\ce{(CH3)3COH}} = 0.2000\text{ mol} < n_{\ce{HCl}} = 0.3623\text{ mol}, so tert-butanol is the limiting reactant

    Your qualitative conclusion that tert-butanol is limiting is correct because 0.2000 mol<0.3623 mol0.2000\text{ mol} < 0.3623\text{ mol}, but your comparison relied on the incorrect molar amount of HCl\ce{HCl} calculated in step 2.

  4. Step 4

    m(reactants)=14.82 g+35.70 g=50.52 g  ⟹  RME=(15.74 g50.52 g)×100%=31.2%m(\text{reactants}) = 14.82\text{ g} + 35.70\text{ g} = 50.52\text{ g} \implies \text{RME} = \left(\frac{15.74\text{ g}}{50.52\text{ g}}\right) \times 100\% = 31.2\%

    Correct

    mreactants=14.82 g+13.21 g=28.03 g  ⟹  RME=(15.74 g28.03 g)×100%=56.2%m_{\text{reactants}} = 14.82\text{ g} + 13.21\text{ g} = 28.03\text{ g} \implies \text{RME} = \left(\frac{15.74\text{ g}}{28.03\text{ g}}\right) \times 100\% = 56.2\%

    You included the total mass of the solution (35.70 g35.70\text{ g}) rather than the mass of the core stoichiometric reactant pure HCl\ce{HCl} (13.21 g13.21\text{ g}), which inflated the denominator and reduced the Reaction Mass Efficiency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass of tert-butanol into moles.

You correctly multiplied the volume and density to find the total mass of the hydrochloric acid solution.

You correctly set up the general formula for Reaction Mass Efficiency as desired product mass divided by reactant input mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Solution Mass Fraction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated the mass of an aqueous reagent solution (V×ρV \times \rho) with the mass of the pure active chemical solute, forgetting to apply the percentage purity (w/w%w/w\%) before computing moles and reactant input mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Aqueous Reagents Mass Conversion
  • For a solution with density ρ\rho and mass fraction ww, the mass of pure solute is msolute=V×ρ×wm_{\text{solute}} = V \times \rho \times w.

  • Always multiply the total solution mass by the decimal mass fraction before converting to moles or calculating stoichiometric reactant inputs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the pure mass of HCl\ce{HCl}: mHCl=35.70 g×0.370=13.21 gm_{\ce{HCl}} = 35.70\text{ g} \times 0.370 = 13.21\text{ g}.

  2. Calculate the true moles of HCl\ce{HCl}: nHCl=13.21 g36.46 g/mol=0.3623 moln_{\ce{HCl}} = \frac{13.21\text{ g}}{36.46\text{ g/mol}} = 0.3623\text{ mol}.

  3. Compare stoichiometric amounts: 0.2000 mol<0.3623 mol0.2000\text{ mol} < 0.3623\text{ mol}, confirming tert-butanol is the limiting reactant.

  4. Sum the core reactant masses: mreactants=14.82 g+13.21 g=28.03 gm_{\text{reactants}} = 14.82\text{ g} + 13.21\text{ g} = 28.03\text{ g}.

  5. Compute RME\text{RME}: RME=(15.74 g28.03 g)×100%=56.2%\text{RME} = \left(\frac{15.74\text{ g}}{28.03\text{ g}}\right) \times 100\% = 56.2\%.

Final answer

Limiting reactant is (CH3)3COH(\text{CH}_3)_3\text{COH}; RME=56.2%\text{RME} = 56.2\%

NEXT STEPS
Final Takeaways from Your Teacher
  • When working with concentrated liquid acids or solutions, write down msolute=msolution×(wt%/100)m_{\text{solute}} = m_{\text{solution}} \times (\text{wt}\% / 100) as a separate step before doing any stoichiometry.

  • Double-check green chemistry definitions to ensure whether solvent/water mass should be included (e.g., in Process Mass Intensity) or excluded (e.g., in core stoichiometric Reaction Mass Efficiency).

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies HCl as the limiting reactant based on comparing raw masses instead of moles, then bases theoretical mass calculations on the wrong reactant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m(pure HCl)=30.00 mL×1.19 g/mL×0.370=13.21 gm(\text{pure }\ce{HCl}) = 30.00\text{ mL} \times 1.19\text{ g/mL} \times 0.370 = 13.21\text{ g}

  2. Step 2

    13.21 g pure HCl<14.82 g alcohol, so HCl is the limiting reactant13.21\text{ g pure }\ce{HCl} < 14.82\text{ g alcohol}\text{, so }\ce{HCl}\text{ is the limiting reactant}

    Correct

    n(CHX3)X3COH=14.82 g74.12 g/mol=0.2000 moln_{\ce{(CH3)3COH}} = \frac{14.82\text{ g}}{74.12\text{ g/mol}} = 0.2000\text{ mol}, nHCl=13.21 g36.46 g/mol=0.3623 mol  ⟹  (CHX3)X3COH is the limiting reactantn_{\ce{HCl}} = \frac{13.21\text{ g}}{36.46\text{ g/mol}} = 0.3623\text{ mol} \implies \ce{(CH3)3COH}\text{ is the limiting reactant}

    Chemical reactions occur based on mole ratios rather than mass ratios. Because the molar mass of HCl\ce{HCl} (36.46 g/mol36.46\text{ g/mol}) is much smaller than that of tert-butanol (74.12 g/mol74.12\text{ g/mol}), 13.21 g13.21\text{ g} of HCl\ce{HCl} corresponds to 0.3623 mol0.3623\text{ mol}, which is in excess relative to the 0.2000 mol0.2000\text{ mol} of tert-butanol.

  3. Step 3

    m(reactants)=14.82 g+13.21 g=28.03 g  ⟹  RME=(15.74 g28.03 g)×100%=56.2%m(\text{reactants}) = 14.82\text{ g} + 13.21\text{ g} = 28.03\text{ g} \implies \text{RME} = \left(\frac{15.74\text{ g}}{28.03\text{ g}}\right) \times 100\% = 56.2\%

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the solution density and mass percentage to determine the pure mass of HCl\ce{HCl}.

You correctly applied the definition of Reaction Mass Efficiency by dividing the mass of isolated product by the combined mass of the core reactants.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass-to-Mole Limiting Reactant Confusion

You identified the limiting reactant by directly comparing raw grams rather than converting each reactant to moles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking that stoichiometry is governed by molar amounts (n=m/Mn = m/M) rather than physical mass. Even though the mass of HCl\ce{HCl} is lower, its low molar mass means it provides substantially more moles than the alcohol.

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometric Equality
  • Limiting reactant status is determined strictly by comparing niνi\frac{n_i}{\nu_i} (moles divided by stoichiometric coefficient), never raw mass.

  • Always convert every given reactant mass into moles (n=mMn = \frac{m}{M}) before comparing reactant amounts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert mass of tert-butanol to moles: n(CHX3)X3COH=14.82 g74.12 g/mol=0.2000 moln_{\ce{(CH3)3COH}} = \frac{14.82\text{ g}}{74.12\text{ g/mol}} = 0.2000\text{ mol}.

  2. Convert mass of pure HCl\ce{HCl} to moles: nHCl=13.21 g36.46 g/mol=0.3623 moln_{\ce{HCl}} = \frac{13.21\text{ g}}{36.46\text{ g/mol}} = 0.3623\text{ mol}.

  3. Compare molar amounts in the 1:11:1 stoichiometric reaction: 0.2000 mol<0.3623 mol0.2000\text{ mol} < 0.3623\text{ mol}, proving (CHX3)X3COH\ce{(CH3)3COH} is the limiting reactant.

Final answer

Limiting reactant is (CH3)3COH(\text{CH}_3)_3\text{COH}; RME=56.2%\text{RME} = 56.2\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out molar conversions (n=m/Mn = m/M) as an explicit checkpoint whenever a problem asks for a limiting reactant or theoretical yield.

  • Check that you never compare grams directly across different compounds with unequal molar masses.

Lock it in

Similar question

01

A chemist reacts 10.0 g10.0\text{ g} of cyclohexanol (M=100.16 g/molM = 100.16\text{ g/mol}) with 25.0 g25.0\text{ g} of an aqueous 48.0% w/w48.0\%\text{ w/w} HBr\ce{HBr} solution (MHBr=80.91 g/molM_{\ce{HBr}} = 80.91\text{ g/mol}) to produce 11.4 g11.4\text{ g} of bromocyclohexane. Calculate the Reaction Mass Efficiency (RME) to three significant figures.

Answer

RME=51.8%\text{RME} = 51.8\%. The mass of pure HBr\ce{HBr} is 25.0 g×0.480=12.0 g25.0\text{ g} \times 0.480 = 12.0\text{ g}. Total stoichiometric reactant input is 10.0 g+12.0 g=22.0 g10.0\text{ g} + 12.0\text{ g} = 22.0\text{ g}. Thus, RME=11.4 g22.0 g×100%≈51.8%\text{RME} = \frac{11.4\text{ g}}{22.0\text{ g}} \times 100\% \approx 51.8\%.

02

In an esterification reaction, 12.0 g12.0\text{ g} of acetic acid (M=60.05 g/molM = 60.05\text{ g/mol}) reacts with 9.20 g9.20\text{ g} of ethanol (M=46.07 g/molM = 46.07\text{ g/mol}) along with 0.50 g0.50\text{ g} of concentrated HX2SOX4\ce{H2SO4} catalyst (not consumed stoichiometrically). If 13.2 g13.2\text{ g} of ethyl acetate is isolated, determine the limiting reactant and the true RME (based on core stoichiometric reactants) to three significant figures.

Answer

Limiting reactant is ethanol; RME=62.3%\text{RME} = 62.3\%. Moles: nacetic=12.060.05=0.200 moln_{\text{acetic}} = \frac{12.0}{60.05} = 0.200\text{ mol}; nethanol=9.2046.07=0.200 moln_{\text{ethanol}} = \frac{9.20}{46.07} = 0.200\text{ mol}. Because amounts are nearly equal, checking unrounded values shows nethanol=0.1997 mol<0.1998 moln_{\text{ethanol}} = 0.1997\text{ mol} < 0.1998\text{ mol}, so ethanol is limiting (or strictly equimolar). Core stoichiometric reactants input excludes catalyst: 12.0 g+9.20 g=21.20 g12.0\text{ g} + 9.20\text{ g} = 21.20\text{ g}. Therefore, RME=13.2 g21.20 g×100%≈62.3%\text{RME} = \frac{13.2\text{ g}}{21.20\text{ g}} \times 100\% \approx 62.3\%.

03

Synthesis of an amide consumes 4.35 g4.35\text{ g} of an amine (M=87.1 g/molM = 87.1\text{ g/mol}, 0.050 mol0.050\text{ mol}) and 40.0 mL40.0\text{ mL} of a 1.50 M1.50\text{ M} aqueous NaOH\ce{NaOH} solution alongside 7.03 g7.03\text{ g} of benzoyl chloride (M=140.6 g/molM = 140.6\text{ g/mol}, 0.050 mol0.050\text{ mol}). The NaOH\ce{NaOH} serves as a stoichiometric base in a 1:1:11:1:1 reaction. If 7.65 g7.65\text{ g} of pure amide is isolated, calculate the RME (excluding water solvent) to three significant figures. (MNaOH=40.00 g/molM_{\ce{NaOH}} = 40.00\text{ g/mol})

Answer

RME=55.5%\text{RME} = 55.5\%. Moles of NaOH=0.0400 L×1.50 mol/L=0.0600 mol\ce{NaOH} = 0.0400\text{ L} \times 1.50\text{ mol/L} = 0.0600\text{ mol}. Mass of pure stoichiometric NaOH=0.0600 mol×40.00 g/mol=2.40 g\ce{NaOH} = 0.0600\text{ mol} \times 40.00\text{ g/mol} = 2.40\text{ g}. Total stoichiometric reactant mass input =4.35 g (amine)+7.03 g (acid chloride)+2.40 g (NaOH)=13.78 g= 4.35\text{ g (amine)} + 7.03\text{ g (acid chloride)} + 2.40\text{ g (NaOH)} = 13.78\text{ g}. Therefore, RME=7.65 g13.78 g×100%≈55.5%\text{RME} = \frac{7.65\text{ g}}{13.78\text{ g}} \times 100\% \approx 55.5\%.

Loading workspace…