Resources
To experimentally distinguish dynamic chemical equilibrium from a static unreactive state, an investigator prepares two systems at : System A contains a stoichiometric mixture of and at in a sealed glass bulb without a catalyst. System B contains an equilibrated mixture of , , and : . In both systems, macroscopic pressures and gas compositions remain strictly invariant for months. (a) For System A, explain why macroscopic constancy reflects a kinetically frozen static state rather than dynamic equilibrium by referencing activation energy and reaction rates. (b) If deuterium gas () is spiked into both systems, predict the specific isotopic molecular species observed via mass spectrometry after in System A versus System B.
Answer and steps
Final answer
(a) System A is kinetically trapped: the huge activation energy makes and (a static metastable state, not true equilibrium). (b) System A yields no isotopic scrambling: only unreacted , , and are detected. System B exhibits dynamic bidirectional exchange, producing mixed isotopic species including and .
Steps
(a) Differentiating Kinetically Frozen Metastability from Dynamic Equilibrium
A system is at dynamic chemical equilibrium only when forward and reverse reactions proceed at non-zero, equal rates:
At true thermodynamic equilibrium, the chemical composition of a mixture of hydrogen and oxygen at and would overwhelmingly favor liquid water, because the standard Gibbs free energy change of formation is strongly negative ():
However, the reaction between and has an extremely high activation energy () at room temperature due to the very strong and covalent bonds. Because thermal energy () at is insufficient to overcome this energy barrier without a spark or catalyst, virtually no molecules undergo reaction:
Because the rates are zero rather than equal and non-zero, the invariant composition in System A is not true dynamic equilibrium, but a kinetically trapped (metastable) or static non-reactive state.
(b) Isotopic Tracing Using Deuterium ()
Isotopic labeling is an experimental technique used to test whether chemical bonds are actively breaking and reforming in a system:
-
System A (Kinetically Frozen State):
- Because , no or bonds are cleaved, and no reaction occurs with .
- No bond exchange or isotopic scrambling takes place.
- Observed species: Only the unreacted parent gases are detected: , , and .
-
System B (Dynamic Chemical Equilibrium):
-
System B is at true dynamic equilibrium:
where .
-
Spiking with introduces a labeled reactant into an ongoing reversible cycle. The forward reaction consumes with to produce labeled deuterium iodide:
-
In addition, the reverse breakdown of simultaneously formed or preexisting iodide species releases mixed dihydrogen:
- Observed species: Due to continuous bond breaking and reformation, mass spectrometry detects mixed isotopic species, including and , alongside , , , and .
-
Typical errors
01 The student misinterprets macroscopic constancy as proof of chemical equilibrium, erroneously claiming the forward and reverse rates are equal and non-zero rather than kinetically frozen at zero.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Because concentrations and pressure are constant, System A has reached dynamic equilibrium. The activation energy was overcome during initial mixing so .
CorrectSystem A is in a kinetically frozen (metastable) static state. The activation energy () for breaking and bonds is far too high to be overcome at without a catalyst or spark, meaning and .
Macroscopic constancy alone does not prove dynamic equilibrium. In System A, the reactions are not occurring at equal non-zero rates; rather, both forward and reverse rates are effectively zero due to a very high activation energy barrier.
- Step 2
System A: , , , , , , and because dynamic equilibrium exchanges isotopes.
CorrectSystem A: , , and .
Because this prediction followed from your earlier conclusion that System A is at dynamic equilibrium, you predicted isotopic scrambling. However, since the mixture is kinetically unreactive at , no bonds break or reform, leaving only the unreacted parent gases.
- Step 3
System B: , , , , , and .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that dynamic chemical equilibrium involves active bond breaking and reformation that produces scrambled isotopic species such as and in System B.
You accurately recalled that dynamic equilibrium requires equal, non-zero forward and reverse rates ().
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assumed that merely mixing reactants at room temperature supplies enough thermal energy to overcome the activation energy barrier.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated constant macroscopic properties (pressure and concentration) as sufficient evidence of dynamic equilibrium, overlooking the possibility of a kinetically frozen state where reaction rates are zero.
REASONING PATH
Your ACEpath teacher’s suggested approach- Dynamic vs. Static Constancy
A system with unchanging macroscopic properties can be either dynamically equilibrated () or kinetically frozen/metastable ().
Check whether the activation energy is low enough for reactions to proceed at the specified temperature before concluding dynamic equilibrium.
- Isotopic Labeling Test
An isotopic tracer like will only scramble into new molecules if bonds are actively breaking and reforming ().
If a mixture is kinetically unreactive, list only the unreacted starting molecules and the added tracer without exchange products.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the activation energy of the reaction at : the strong covalent bonds give an extremely high , so thermal collisions at room temperature cannot initiate reaction without a catalyst or ignition source.
Deduce the rates: and . Because the rates are zero rather than non-zero, System A is in a kinetically frozen static state.
Apply the zero-rate condition to the spike in System A: with no bonds breaking, no reaction or isotopic exchange occurs, leaving only , , and .
(a) System A is a kinetically trapped static state because its high activation energy prevents reaction at (). (b) System A contains only , , and ; System B contains , , , , , and .
02 The student confuses dynamic equilibrium with a static 'completed' state, failing to recognize that ongoing forward and reverse reactions in System B scramble isotopes into mixed species such as HD and DI.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
System A has a very high activation energy at , so forward and reverse reaction rates are zero. Because neither reaction occurs, the system is kinetically frozen rather than in dynamic equilibrium.
- Step 2
System A: , , and because no reaction occurs.
- Step 3
System B: , , , and only, because equilibrium is already reached so no new species can form.
CorrectSystem B: , , , , , and due to ongoing forward and reverse reactions ().
Dynamic equilibrium does not mean reactions have stopped. Forward and reverse reactions continue at equal, non-zero rates. The spiked reacts with to produce , and subsequent reversible reactions generate mixed .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly linked high activation energy to zero reaction rates to define a kinetically frozen state.
You accurately deduced that no isotopic scrambling can occur in a non-reactive mixture.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assumed that because macroscopic concentrations are constant at equilibrium, microscopic bond breaking and formation have permanently stopped.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisEquilibrium is dynamic (), meaning molecules continually react and exchange atoms. Introducing an isotopic label like participates in these active forward and reverse pathways, resulting in scrambled isotopic products such as and .
REASONING PATH
Your ACEpath teacher’s suggested approach- Dynamic vs. Static Rates
A static state has ; dynamic equilibrium has .
Always verify whether microscopic bond breaking and reforming are actively taking place even if macroscopic concentrations do not change.
- Isotopic Tracing in Reversible Reactions
Spiking an isotopic tracer into a dynamic equilibrium incorporates the isotope into all species participating in the forward and reverse reaction cycles.
Track elementary bond-cleavage and reformation steps to identify all resulting scrambled isotopologues.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that System B maintains active forward and reverse reaction pathways: where .
React the added with existing via the forward pathway to form : .
Combine reverse decomposition steps (e.g., ) to produce mixed dihydrogen molecules, .
List all resulting molecular species detected in the mixture.
System A: , , and . System B: , , , , , and .
Lock it in
What distinguishes dynamic chemical equilibrium from a kinetically frozen (metastable) state when both exhibit constant macroscopic concentrations?
Dynamic equilibrium has non-zero opposing rates (), whereas a kinetically frozen state has zero rates () due to high activation energy.
Similar question
A sealed flask contains gaseous diamond-forming reactants (or solid diamond and graphite) at and . Diamond is thermodynamically unstable relative to graphite (), yet no conversion is observed over several years. Classify this state as dynamic equilibrium or kinetically trapped, and explain using activation energy and rates.
Answer
Kinetically trapped (metastable). The conversion of diamond to graphite requires breaking rigid, strong carbon–carbon covalent bonds, leading to an extremely high activation energy (). Consequently, the conversion rate is virtually zero at (), rather than opposing forward and reverse processes occurring at equal non-zero rates.
Two closed containers at show constant pressure: Container 1 holds and without a catalyst; Container 2 holds and at equilibrium (). A small amount of -labeled ammonia () is injected into Container 1, and is injected into Container 2. In which container, if either, will isotopic exchange into other species occur within 1 hour? Identify the species formed.
Answer
Isotopic exchange occurs only in Container 2. Container 1 is kinetically frozen due to the enormous triple bond activation barrier without a catalyst, so , , and remain unreacted. In Container 2, dynamic equilibrium is active (), so rapid reversible association/dissociation incorporates into nitrogen tetroxide, forming (or mixed-isotope ).
A researcher investigates the reaction . Mixture X (unreactive without catalyst) and Mixture Y (equilibrated with catalyst) both show constant partial pressures of and . If an isotopically pure tracer is added, derive the differential rate equation for the initial rate of appearance of the mixed species in terms of the forward rate constant and reactant concentrations, and contrast its value between Mixture X and Mixture Y.
Answer
For a dynamic bimolecular exchange followed by reversible exchange or direct scrambling, the rate of formation is directly proportional to the active forward exchange rate: (or via intermediate ). In Mixture Y, active forward and reverse reaction yields a positive rate . In Mixture X, because due to high without catalyst, .