Resources

A solution contains 0.0200 M Ba2+0.0200\text{ M } \text{Ba}^{2+} and 0.0150 M Ca2+0.0150\text{ M } \text{Ca}^{2+}. Solid sodium sulfate (Na2SO4\text{Na}_2\text{SO}_4) is slowly added without changing the solution volume. Given Ksp(BaSO4)=1.10×10−10K_{sp}(\text{BaSO}_4) = 1.10 \times 10^{-10} and Ksp(CaSO4)=4.90×10−5K_{sp}(\text{CaSO}_4) = 4.90 \times 10^{-5} at 25∘C25^\circ\text{C}, determine: (a) which cation precipitates first, and (b) the concentration of the first cation remaining in solution at the exact threshold boundary when the second cation begins to precipitate.

Answer and steps

Final answer

(a) Ba2+\text{Ba}^{2+} precipitates first; (b) [Ba2+]=3.37×10−8 M[\text{Ba}^{2+}] = 3.37 \times 10^{-8}\text{ M}

Steps

Part (a): Determining Which Cation Precipitates First

Precipitation of a sparingly soluble salt occurs when the ion product quotient (QspQ_{sp}) equals or exceeds its solubility product constant (KspK_{sp}). Both precipitation equilibria share a 1:11:1 stoichiometry with sulfate ions (SOX4X2−\ce{SO4^{2-}}):

BaSOX4(s)⇌BaX2+(aq)+SOX4X2−(aq),Ksp=[BaX2+][SOX4X2−]\ce{BaSO4(s) <=> Ba^{2+}(aq) + SO4^{2-}(aq)}, \quad K_{sp} = [\ce{Ba^{2+} }][\ce{SO4^{2-} }] CaSOX4(s)⇌CaX2+(aq)+SOX4X2−(aq),Ksp=[CaX2+][SOX4X2−]\ce{CaSO4(s) <=> Ca^{2+}(aq) + SO4^{2-}(aq)}, \quad K_{sp} = [\ce{Ca^{2+} }][\ce{SO4^{2-} }]

To find which salt precipitates first, calculate the minimum sulfate concentration, [SOX4X2−][\ce{SO4^{2-}}], required to initiate precipitation for each cation:

  1. For BaSOX4\ce{BaSO4}: [SOX4X2−]needed=Ksp(BaSOX4)[BaX2+]=1.10×10−100.0200 M=5.50×10−9 M[\ce{SO4^{2-} }]_{\text{needed}} = \frac{K_{sp}(\ce{BaSO4})}{[\ce{Ba^{2+} }]} = \frac{1.10 \times 10^{-10}}{0.0200\text{ M}} = 5.50 \times 10^{-9}\text{ M}
  2. For CaSOX4\ce{CaSO4}: [SOX4X2−]needed=Ksp(CaSOX4)[CaX2+]=4.90×10−50.0150 M≈3.27×10−3 M[\ce{SO4^{2-} }]_{\text{needed}} = \frac{K_{sp}(\ce{CaSO4})}{[\ce{Ca^{2+} }]} = \frac{4.90 \times 10^{-5}}{0.0150\text{ M}} \approx 3.27 \times 10^{-3}\text{ M}

As NaX2SOX4\ce{Na2SO4} is slowly introduced, the concentration of SOX4X2−\ce{SO4^{2-}} in the solution rises gradually starting from zero. Because 5.50×10−9 M≪3.27×10−3 M5.50 \times 10^{-9}\text{ M} \ll 3.27 \times 10^{-3}\text{ M}, the threshold for BaSOX4\ce{BaSO4} is reached first.

Therefore, BaX2+\ce{Ba^{2+}} precipitates first.


Part (b): Concentration of BaX2+\ce{Ba^{2+}} Remaining at the Second Precipitation Threshold

The second cation, \ce{Ca^{2+}, begins to precipitate precisely when [SOX4X2−][\ce{SO4^{2-}}] reaches the threshold calculated for CaSOX4\ce{CaSO4}:

[SOX4X2−]=Ksp(CaSOX4)[CaX2+]=4.90×10−50.0150 M=3.267×10−3 M[\ce{SO4^{2-} }] = \frac{K_{sp}(\ce{CaSO4})}{[\ce{Ca^{2+} }]} = \frac{4.90 \times 10^{-5}}{0.0150\text{ M}} = 3.267 \times 10^{-3}\text{ M}

Because solid BaSOX4\ce{BaSO4} is already in dynamic equilibrium with the solution, any additional sulfate forces [BaX2+][\ce{Ba^{2+} }] to decrease according to its KspK_{sp} expression:

[BaX2+]=Ksp(BaSOX4)[SOX4X2−][\ce{Ba^{2+} }] = \frac{K_{sp}(\ce{BaSO4})}{[\ce{SO4^{2-} }]}

Substitute the value of [SOX4X2−][\ce{SO4^{2-}}] at this threshold:

[BaX2+]=1.10×10−103.267×10−3 M=3.37×10−8 M[\ce{Ba^{2+} }] = \frac{1.10 \times 10^{-10}}{3.267 \times 10^{-3}\text{ M}} = 3.37 \times 10^{-8}\text{ M}

(Common Pitfall: Do not assume that [CaX2+][\ce{Ca^{2+} }] decreases before it begins to precipitate; until the threshold of 3.27×10−3 M3.27 \times 10^{-3}\text{ M} sulfate is reached, no solid CaSOX4\ce{CaSO4} has formed, so [CaX2+][\ce{Ca^{2+} }] remains at its initial value of 0.0150 M0.0150\text{ M}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student compares only the raw K_sp values without dividing by the initial cation concentrations to find the required precipitating ion concentrations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Since 1.10×10−10<4.90×10−51.10 \times 10^{-10} < 4.90 \times 10^{-5}, Ba2+\text{Ba}^{2+} precipitates first.

    Correct

    [SO42−]needed, Ba=Ksp(BaSO4)[Ba2+]=1.10×10−100.0200 M=5.50×10−9 M[\text{SO}_4^{2-}]_{\text{needed, Ba}} = \frac{K_{sp}(\text{BaSO}_4)}{[\text{Ba}^{2+}]} = \frac{1.10 \times 10^{-10}}{0.0200\text{ M}} = 5.50 \times 10^{-9}\text{ M}; [SO42−]needed, Ca=Ksp(CaSO4)[Ca2+]=4.90×10−50.0150 M=3.27×10−3 M[\text{SO}_4^{2-}]_{\text{needed, Ca}} = \frac{K_{sp}(\text{CaSO}_4)}{[\text{Ca}^{2+}]} = \frac{4.90 \times 10^{-5}}{0.0150\text{ M}} = 3.27 \times 10^{-3}\text{ M}. Since 5.50×10−9 M<3.27×10−3 M5.50 \times 10^{-9}\text{ M} < 3.27 \times 10^{-3}\text{ M}, Ba2+\text{Ba}^{2+} precipitates first.

    You cannot determine which cation precipitates first solely by comparing raw KspK_{sp} values unless the initial cation concentrations and salt stoichiometries are identical. You need to calculate the minimum [SO42−][\text{SO}_4^{2-}] needed to initiate precipitation for each cation and choose the one with the lower concentration threshold.

  2. Step 2

    Threshold [SO42−]=Ksp(CaSO4)[Ca2+]=4.90×10−50.0150=3.27×10−3 M\text{Threshold } [\text{SO}_4^{2-}] = \frac{K_{sp}(\text{CaSO}_4)}{[\text{Ca}^{2+}]} = \frac{4.90 \times 10^{-5}}{0.0150} = 3.27 \times 10^{-3}\text{ M}

  3. Step 3

    [Ba2+]=Ksp(BaSO4)[SO42−]=1.10×10−103.27×10−3=3.37×10−8 M[\text{Ba}^{2+}] = \frac{K_{sp}(\text{BaSO}_4)}{[\text{SO}_4^{2-}]} = \frac{1.10 \times 10^{-10}}{3.27 \times 10^{-3}} = 3.37 \times 10^{-8}\text{ M}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the relevant solubility product expressions for both barium sulfate and calcium sulfate.

You correctly calculated the exact sulfate threshold at which calcium sulfate begins to precipitate.

You applied the common-ion equilibrium correctly to find the residual concentration of barium ions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Comparing raw K_sp values without calculating precipitating ion concentration

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the salt with the smaller KspK_{sp} always precipitates first, overlooking the fact that unequal initial concentrations of the metal cations change the amount of added common ion required to reach Qsp=KspQ_{sp} = K_{sp}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Selective Precipitation Condition
  • In selective precipitation, the substance that precipitates first is the one requiring the lowest concentration of the titrant/precipitating ion ([ion]min=Ksp[cation][\text{ion}]_{\text{min}} = \frac{K_{sp}}{[\text{cation}]} for 1:11:1 salts), not necessarily the one with the smallest KspK_{sp}.

  • Always compute [precipitating ion]needed[\text{precipitating ion}]_{\text{needed}} for each competing cation before deciding which one precipitates first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the precipitation condition for BaSO4\text{BaSO}_4: Qsp=[Ba2+][SO42−]=Ksp(BaSO4)Q_{sp} = [\text{Ba}^{2+}][\text{SO}_4^{2-}] = K_{sp}(\text{BaSO}_4).

  2. Calculate [SO42−]needed, Ba=1.10×10−100.0200 M=5.50×10−9 M[\text{SO}_4^{2-}]_{\text{needed, Ba}} = \frac{1.10 \times 10^{-10}}{0.0200\text{ M}} = 5.50 \times 10^{-9}\text{ M}.

  3. Calculate [SO42−]needed, Ca=4.90×10−50.0150 M=3.27×10−3 M[\text{SO}_4^{2-}]_{\text{needed, Ca}} = \frac{4.90 \times 10^{-5}}{0.0150\text{ M}} = 3.27 \times 10^{-3}\text{ M}.

  4. Compare the two required concentrations: because 5.50×10−9 M<3.27×10−3 M5.50 \times 10^{-9}\text{ M} < 3.27 \times 10^{-3}\text{ M}, Ba2+\text{Ba}^{2+} precipitates first.

Final answer

(a) Ba2+\text{Ba}^{2+} precipitates first; (b) [Ba2+]=3.37×10−8 M[\text{Ba}^{2+}] = 3.37 \times 10^{-8}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how unequal initial ion concentrations can alter precipitation order.

  • Practice selective precipitation problems where one cation has a much lower initial concentration than another.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies which cation's K_sp governs the remaining concentration at the threshold and mistakenly uses K_sp(CaSO₄) to compute [Ba²⁺].

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [SO42−] for Ba2+=1.10×10−100.0200=5.50×10−9 M  ⟹  [SO42−] for Ca2+=4.90×10−50.0150=3.27×10−3 M  ⟹  5.50×10−9 M<3.27×10−3 M, so Ba2+ precipitates first.[\text{SO}_4^{2-}] \text{ for } \text{Ba}^{2+} = \frac{1.10 \times 10^{-10}}{0.0200} = 5.50 \times 10^{-9}\text{ M} \implies [\text{SO}_4^{2-}] \text{ for } \text{Ca}^{2+} = \frac{4.90 \times 10^{-5}}{0.0150} = 3.27 \times 10^{-3}\text{ M} \implies 5.50 \times 10^{-9}\text{ M} < 3.27 \times 10^{-3}\text{ M}\text{, so } \text{Ba}^{2+} \text{ precipitates first.}

  2. Step 2

    Boundary [SO42−]=3.27×10−3 M\text{Boundary } [\text{SO}_4^{2-}] = 3.27 \times 10^{-3}\text{ M}

  3. Step 3

    [Ba2+]=Ksp(CaSO4)[SO42−]  ⟹  [Ba2+]=4.90×10−53.27×10−3=0.0150 M[\text{Ba}^{2+}] = \frac{K_{sp}(\text{CaSO}_4)}{[\text{SO}_4^{2-}]} \implies [\text{Ba}^{2+}] = \frac{4.90 \times 10^{-5}}{3.27 \times 10^{-3}} = 0.0150\text{ M}

    Correct

    [Ba2+]=Ksp(BaSO4)[SO42−]=1.10×10−103.27×10−3 M≈3.37×10−8 M[\text{Ba}^{2+}] = \frac{K_{sp}(\text{BaSO}_4)}{[\text{SO}_4^{2-}]} = \frac{1.10 \times 10^{-10}}{3.27 \times 10^{-3}\text{ M}} \approx 3.37 \times 10^{-8}\text{ M}

    You used the solubility product constant of CaSO4\text{CaSO}_4 rather than that of BaSO4\text{BaSO}_4. Because BaSO4\text{BaSO}_4 precipitate is in equilibrium with the solution, [extBa2+][ ext{Ba}^{2+}] is governed by Ksp(BaSO4)=[Ba2+][SO42−]K_{sp}(\text{BaSO}_4) = [\text{Ba}^{2+}][\text{SO}_4^{2-}].

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the sulfate threshold required to initiate precipitation for each cation.

You accurately deduced that Ba2+\text{Ba}^{2+} precipitates first because it requires a much lower concentration of sulfate.

You correctly identified the boundary sulfate concentration at which Ca2+\text{Ca}^{2+} begins to precipitate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong equilibrium constant chosen for residual ion calculation

You substituted Ksp(CaSO4)K_{sp}(\text{CaSO}_4) into the expression for [Ba2+][\text{Ba}^{2+}] instead of using Ksp(BaSO4)K_{sp}(\text{BaSO}_4), which ended up simply recalculating the initial [Ca2+][\text{Ca}^{2+}] concentration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In fractional precipitation, the shared precipitating agent concentration at the boundary is dictated by the second precipitate, but the remaining dissolved concentration of the first cation is always governed by its own precipitate's equilibrium expression (KspK_{sp} of the first salt).

REASONING PATH
Your ACEpath teacher’s suggested approach
Match ion to its own equilibrium
  • For any ion [Mn+][\text{M}^{n+}] remaining in saturated solution with solid MaXb\text{M}_a\text{X}_b, [Mn+]a[Xm−]b=Ksp(MaXb)[\text{M}^{n+}]^a [\text{X}^{m-}]^b = K_{sp}(\text{M}_a\text{X}_b).

  • Always pair the concentration of the cation you are solving for with the KspK_{sp} of the precipitate formed by that specific cation.

Sanity check on remaining concentration
  • As precipitation proceeds, the remaining concentration of the first cation must decrease well below its initial concentration.

  • Check your calculated remaining concentration against the initial value: finding [Ba2+]=0.0150 M[\text{Ba}^{2+}] = 0.0150\text{ M} (essentially unchanged from 0.0200 M0.0200\text{ M}) indicates that the extensive precipitation of BaSO4\text{BaSO}_4 was not accounted for.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the solubility product expression for BaSO4\text{BaSO}_4: Ksp(BaSO4)=[Ba2+][SO42−]K_{sp}(\text{BaSO}_4) = [\text{Ba}^{2+}][\text{SO}_4^{2-}].

  2. Solve for [Ba2+][\text{Ba}^{2+}]: [Ba2+]=Ksp(BaSO4)[SO42−][\text{Ba}^{2+}] = \frac{K_{sp}(\text{BaSO}_4)}{[\text{SO}_4^{2-}]}.

  3. Substitute the boundary [SO42−][\text{SO}_4^{2-}]: [Ba2+]=1.10×10−103.267×10−3 M=3.37×10−8 M[\text{Ba}^{2+}] = \frac{1.10 \times 10^{-10}}{3.267 \times 10^{-3}\text{ M}} = 3.37 \times 10^{-8}\text{ M}.

Final answer

(a) Ba2+\text{Ba}^{2+} precipitates first; (b) [Ba2+]=3.37×10−8 M[\text{Ba}^{2+}] = 3.37 \times 10^{-8}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how fractional precipitation couples two separate solubility equilibria through one shared common ion.

  • Label each KspK_{sp} explicitly with its chemical formula throughout your scratch work to prevent accidentally swapping constants.

  • Practice solving for percent recovery or separation efficiency: [Ba2+]remaining[Ba2+]initial×100%\frac{[\text{Ba}^{2+}]_{\text{remaining}}}{[\text{Ba}^{2+}]_{\text{initial}}} \times 100\%.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the precipitation threshold of the second cation with its initial concentration and substitutes [Ca²⁺] instead of [SO₄²⁻] into the BaSO₄ equilibrium expression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    [SO42−] to precipitate Ba2+=1.10×10−100.0200=5.50×10−9 M  ⟹  [SO42−] to precipitate Ca2+=4.90×10−50.0150=3.27×10−3 M[\text{SO}_4^{2-}] \text{ to precipitate } \text{Ba}^{2+} = \frac{1.10 \times 10^{-10}}{0.0200} = 5.50 \times 10^{-9}\text{ M} \implies [\text{SO}_4^{2-}] \text{ to precipitate } \text{Ca}^{2+} = \frac{4.90 \times 10^{-5}}{0.0150} = 3.27 \times 10^{-3}\text{ M}

  2. Step 2

    Ba2+ precipitates first because 5.50×10−9 M is smaller.\text{Ba}^{2+} \text{ precipitates first because } 5.50 \times 10^{-9}\text{ M is smaller.}

  3. Step 3

    [Ba2+]=Ksp(BaSO4)[Ca2+]=1.10×10−100.0150=7.33×10−9 M[\text{Ba}^{2+}] = \frac{K_{sp}(\text{BaSO}_4)}{[\text{Ca}^{2+}]} = \frac{1.10 \times 10^{-10}}{0.0150} = 7.33 \times 10^{-9}\text{ M}

    Correct

    [Ba2+]=Ksp(BaSO4)[SO42−]threshold=1.10×10−103.267×10−3 M=3.37×10−8 M[\text{Ba}^{2+}] = \frac{K_{sp}(\text{BaSO}_4)}{[\text{SO}_4^{2-}]_{\text{threshold}}} = \frac{1.10 \times 10^{-10}}{3.267 \times 10^{-3}\text{ M}} = 3.37 \times 10^{-8}\text{ M}

    The equilibrium expression for barium sulfate is Ksp(BaSO4)=[Ba2+][SO42−]K_{sp}(\text{BaSO}_4) = [\text{Ba}^{2+}][\text{SO}_4^{2-}]. When CaSO4\text{CaSO}_4 begins to precipitate, the solution contains [SO42−]=3.27×10−3 M[\text{SO}_4^{2-}] = 3.27 \times 10^{-3}\text{ M}, so you must divide Ksp(BaSO4)K_{sp}(\text{BaSO}_4) by this common sulfate concentration, not by [Ca2+][\text{Ca}^{2+}].

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the threshold sulfate concentration required to precipitate both cations.

You correctly identified that barium precipitates first because it requires a significantly lower sulfate concentration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect Equilibrium Ion Substitution

You substituted the concentration of the second cation [extCa2+][ ext{Ca}^{2+}] into the equilibrium expression of BaSO4\text{BaSO}_4 instead of using the common precipitating anion [extSO42−][ ext{SO}_4^{2-}].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You lost track of which chemical species acts as the common linking variable between the two simultaneous equilibrium systems. In selective precipitation, the added titrant ion (here, SO42−\text{SO}_4^{2-}) is the single variable shared by both solubility equilibria.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Shared Linking Ion
  • In selective precipitation, the added precipitant is the common ion present in both solubility product expressions (KspK_{sp}).

  • Write down the explicit chemical equilibrium for the first precipitate: Ksp(BaSO4)=[Ba2+][SO42−]K_{sp}(\text{BaSO}_4) = [\text{Ba}^{2+}][\text{SO}_4^{2-}], noting that the denominator must be [SO42−][\text{SO}_4^{2-}].

Connect Second Threshold to First Equilibrium
  • The onset of the second precipitate establishes the exact concentration of the added precipitating ion in the solution.

  • Use [SO42−]=Ksp(CaSO4)[Ca2+][\text{SO}_4^{2-}] = \frac{K_{sp}(\text{CaSO}_4)}{[\text{Ca}^{2+}]} as the input into [Ba2+]=Ksp(BaSO4)[SO42−][\text{Ba}^{2+}] = \frac{K_{sp}(\text{BaSO}_4)}{[\text{SO}_4^{2-}]}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. At the boundary where CaSO4\text{CaSO}_4 just begins to precipitate, the sulfate concentration in solution is [SO42−]=Ksp(CaSO4)[Ca2+]=4.90×10−50.0150 M=3.267×10−3 M[\text{SO}_4^{2-}] = \frac{K_{sp}(\text{CaSO}_4)}{[\text{Ca}^{2+}]} = \frac{4.90 \times 10^{-5}}{0.0150\text{ M}} = 3.267 \times 10^{-3}\text{ M}.

  2. Because BaSO4(s)\text{BaSO}_4(s) is in equilibrium with the solution, its ions must satisfy Ksp(BaSO4)=[Ba2+][SO42−]K_{sp}(\text{BaSO}_4) = [\text{Ba}^{2+}][\text{SO}_4^{2-}].

  3. Substitute the shared [SO42−][\text{SO}_4^{2-}] into the BaSO4\text{BaSO}_4 equilibrium: [Ba2+]=1.10×10−103.267×10−3 M=3.37×10−8 M[\text{Ba}^{2+}] = \frac{1.10 \times 10^{-10}}{3.267 \times 10^{-3}\text{ M}} = 3.37 \times 10^{-8}\text{ M}.

Final answer

(a) Ba2+\text{Ba}^{2+} precipitates first; (b) [Ba2+]=3.37×10−8 M[\text{Ba}^{2+}] = 3.37 \times 10^{-8}\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the complete equilibrium constant expression with formula names (Ksp=[cation][anion]K_{sp} = [\text{cation}][\text{anion}]) before substituting numerical values.

  • Highlight the common precipitating ion across both equilibria to ensure you use its concentration as the bridge between the two salts.

Lock it in

Similar question

01

A solution contains 0.10 M Mg2+0.10\text{ M } \text{Mg}^{2+} and 1.0×10−4 M Fe2+1.0 \times 10^{-4}\text{ M } \text{Fe}^{2+}. Potassium hydroxide (KOH\text{KOH}) is slowly added. Given Ksp(Mg(OH)2)=5.6×10−12K_{sp}(\text{Mg(OH)}_2) = 5.6 \times 10^{-12} and Ksp(Fe(OH)2)=4.9×10−17K_{sp}(\text{Fe(OH)}_2) = 4.9 \times 10^{-17}, calculate the minimum [OH−][\text{OH}^-] needed to begin precipitation of each cation and state which precipitates first.

Answer

[OH−]Mg=5.6×10−120.10=7.48×10−6 M[\text{OH}^-]_{\text{Mg}} = \sqrt{\frac{5.6 \times 10^{-12}}{0.10}} = 7.48 \times 10^{-6}\text{ M}; [OH−]Fe=4.9×10−171.0×10−4=7.00×10−7 M[\text{OH}^-]_{\text{Fe}} = \sqrt{\frac{4.9 \times 10^{-17}}{1.0 \times 10^{-4}}} = 7.00 \times 10^{-7}\text{ M}. Because 7.00×10−7 M<7.48×10−6 M7.00 \times 10^{-7}\text{ M} < 7.48 \times 10^{-6}\text{ M}, Fe2+\text{Fe}^{2+} precipitates first as Fe(OH)2\text{Fe(OH)}_2.

02

A solution contains 0.050 M Cl−0.050\text{ M } \text{Cl}^- and 0.020 M I−0.020\text{ M } \text{I}^-. Solid AgNO3\text{AgNO}_3 is added slowly. Given Ksp(AgCl)=1.8×10−10K_{sp}(\text{AgCl}) = 1.8 \times 10^{-10} and Ksp(AgI)=8.5×10−17K_{sp}(\text{AgI}) = 8.5 \times 10^{-17}: (a) which halide precipitates first, and (b) what is [I−][\text{I}^-] when AgCl\text{AgCl} begins to precipitate?

Answer

(a) [Ag+]needed, I=8.5×10−170.020=4.25×10−15 M[\text{Ag}^+]_{\text{needed, I}} = \frac{8.5 \times 10^{-17}}{0.020} = 4.25 \times 10^{-15}\text{ M} and [Ag+]needed, Cl=1.8×10−100.050=3.60×10−9 M[\text{Ag}^+]_{\text{needed, Cl}} = \frac{1.8 \times 10^{-10}}{0.050} = 3.60 \times 10^{-9}\text{ M}. Since 4.25×10−15 M<3.60×10−9 M4.25 \times 10^{-15}\text{ M} < 3.60 \times 10^{-9}\text{ M}, AgI\text{AgI} precipitates first. (b) When AgCl\text{AgCl} starts precipitating, [Ag+]=3.60×10−9 M[\text{Ag}^+] = 3.60 \times 10^{-9}\text{ M}, so [I−]=Ksp(AgI)[Ag+]=8.5×10−173.60×10−9 M=2.36×10−8 M[\text{I}^-] = \frac{K_{sp}(\text{AgI})}{[\text{Ag}^+]} = \frac{8.5 \times 10^{-17}}{3.60 \times 10^{-9}\text{ M}} = 2.36 \times 10^{-8}\text{ M}.

03

A solution contains 0.010 M Sr2+0.010\text{ M } \text{Sr}^{2+} and 0.080 M Ba2+0.080\text{ M } \text{Ba}^{2+}. Sodium chromate (Na2CrO4\text{Na}_2\text{CrO}_4) is added slowly. Given Ksp(BaCrO4)=1.2×10−10K_{sp}(\text{BaCrO}_4) = 1.2 \times 10^{-10} and Ksp(SrCrO4)=3.5×10−5K_{sp}(\text{SrCrO}_4) = 3.5 \times 10^{-5}, determine the percentage of Ba2+\text{Ba}^{2+} remaining unprecipitated in solution when SrCrO4\text{SrCrO}_4 begins to precipitate.

Answer

Threshold [CrO42−][\text{CrO}_4^{2-}] for SrCrO4\text{SrCrO}_4 is 3.5×10−50.010=3.50×10−3 M\frac{3.5 \times 10^{-5}}{0.010} = 3.50 \times 10^{-3}\text{ M}. At this concentration, remaining [Ba2+]=1.2×10−103.50×10−3=3.43×10−8 M[\text{Ba}^{2+}] = \frac{1.2 \times 10^{-10}}{3.50 \times 10^{-3}} = 3.43 \times 10^{-8}\text{ M}. The fraction remaining is 3.43×10−8 M0.080 M×100%=4.3×10−5%\frac{3.43 \times 10^{-8}\text{ M}}{0.080\text{ M}} \times 100\% = 4.3 \times 10^{-5}\%.

Loading workspace…