Resources
In an analytical chemistry laboratory, a coordination complex of manganese, , is analyzed for its magnetic properties. (a) Determine the oxidation state and -electron count of the central manganese ion. (b) Cyanide () is a strong-field ligand that creates a large octahedral crystal field splitting . Write the ground-state -orbital electron configuration in terms of and orbitals. (c) Using an automated Gouy magnetic balance at , the effective magnetic moment is measured. Calculate the theoretical spin-only magnetic moment (where is the number of unpaired electrons and is the Bohr magneton) to three significant figures.
Answer and steps
Final answer
(a) Oxidation state: ; -electron count: ; (b) Ground-state configuration: (low-spin); (c) Number of unpaired electrons ; .
Steps
Part (a): Oxidation State and -Electron Count of Manganese
-
Determine the oxidation state: The compound dissociates into three potassium cations, , and the complex anion .
- Cyanide () is a monodentate ligand with a charge.
- Letting represent the oxidation state of manganese: Therefore, the manganese ion is .
-
Determine the -electron count:
- Neutral manganese () has the ground-state electron configuration:
- When transition metal atoms ionize, electrons are removed first from the outer subshell and then from the subshell: The ion has a electron count.
Part (b): Octahedral Crystal Field Configuration
-
Octahedral splitting: Under an octahedral ligand field, the five degenerate -orbitals split into:
- A lower-energy set of three orbitals: (, , )
- A higher-energy set of two orbitals: (, )
-
Ligand field strength and electron placement:
- Cyanide () is a strong-field ligand high in the spectrochemical series, making the crystal field splitting energy significantly larger than the electron pairing energy ().
- This large energy gap forces electrons to pair in the lower-energy subshell rather than occupy the higher-energy orbitals (a low-spin complex).
- Following Hund's rule, the first three electrons enter separate orbitals with parallel spins. The fourth electron pairs up in one of the orbitals.
Therefore, the ground-state configuration is .
Part (c): Theoretical Spin-Only Magnetic Moment
-
Identify the number of unpaired electrons ():
- The set contains three degenerate orbitals holding four electrons: one orbital has a paired pair () and two orbitals have single electrons (, ).
- Hence, the number of unpaired electrons is:
- Calculate the spin-only magnetic moment (): Using the formula :
Typical errors
01 The student treats the complex as high-spin despite CN⁻ being a strong-field ligand, placing electrons into eg according to Hund's rule and overestimating unpaired electrons.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Cyanide () is a strong-field ligand that produces a large crystal field splitting (). Because the energy cost to pair electrons () is smaller than promoting an electron to (), the fourth electron pairs up in the level to yield .
- Step 3Correct
You applied the spin-only formula correctly for , but this value was inherited from the high-spin configuration in Step 2. In the correct state, there are only unpaired electrons.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up the oxidation state equation for the complex ion.
You correctly removed the valence electrons before the electrons to obtain the count.
You applied the spin-only magnetic moment formula accurately for your chosen value of .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeTreating a strong-field complex as high-spin.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied Hund's rule across all five -orbitals as if they were degenerate, overlooking that a strong-field ligand () makes the orbital splitting greater than the pairing energy , forcing electrons to pair in before populating .
REASONING PATH
Your ACEpath teacher’s suggested approach- Spectrochemical Series Check
If (strong-field ligand like or ), the complex is low-spin. If (weak-field ligand like halides or ), it is high-spin.
Check whether the ligand is strong-field or weak-field before placing the 4th through 7th -electrons.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that is high in the spectrochemical series, so (low-spin).
Place the first three electrons singly into the set with parallel spins ().
Place the fourth electron as a paired spin into one of the orbitals, leaving empty: .
Count the unpaired electrons: two orbitals have single electrons, so .
Substitute into the magnetic moment formula: .
(a) , ; (b) ; (c) ,
02 The student incorrectly calculates the oxidation state of manganese as +2 by treating cyanide as neutral or miscounting counterions, resulting in a d⁵ configuration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Charge balance gives has lost two electrons, leaving
CorrectOxidation state: ; -electron count:
The neutral compound contains three counter-ions, leaving a complex anion with a charge: . Each cyanide ligand has a charge, so yields (forming ). Since neutral is , removing three electrons gives ().
- Step 2
Strong-field causes low spin All 5 electrons enter orbitals Configuration:
CorrectYour logic for placing electrons in a low-spin octahedral field is completely sound, but it was affected by the initial count. For (), the 4 electrons fill the orbitals to give .
- Step 3
In there is 1 unpaired electron,
CorrectYou applied the spin-only magnetic moment formula accurately for . However, the correct ground state has two singly occupied orbitals and one paired orbital, giving unpaired electrons and .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that is a strong-field ligand that creates a low-spin configuration.
You correctly removed the electrons first when ionizing transition metal atoms.
You applied the spin-only magnetic moment formula and calculated the numerical value accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou miscalculated the overall charge of the coordination sphere from the potassium counter-ions, leading to an oxidation state of rather than .
REASONING PATH
Your ACEpath teacher’s suggested approach- Dissociate Counter-Ions First
Separate the coordination entity from its counter-ions before setting up the charge-balance equation.
Write so the coordination sphere charge is clearly .
- Count Transition Metal d-Electrons
For a transition metal ion , electron removal follows then .
For (, ), removing 3 electrons gives , not .
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify complex charge:
Solve oxidation state: (giving , )
Fill low-spin octahedral field: electrons pair up in
Count unpaired electrons:
Calculate magnetic moment:
(a) , ; (b) ; (c)
03 The student misinterprets the (t2g)⁴ configuration as having 4 unpaired electrons by assuming each electron in t2g remains unpaired rather than pairing up into one doubly occupied orbital.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
t_{2g} n = 4 \Longrightarrow _s = ,_B = 4.90,_B
CorrectNumber of unpaired electrons ;
The level consists of only 3 degenerate orbitals (). By the Pauli exclusion principle and Hund's rule, placing 4 electrons into 3 orbitals requires 1 orbital to be doubly occupied () and 2 orbitals to be singly occupied (, ). Thus, unpaired electrons, not .
WHAT YOU DID WELL
Compliments from Your TeacherYou set up and solved the algebraic oxidation-state equation correctly for the neutral complex.
You deduced the ground-state electron configuration of by correctly removing the electrons first.
You applied crystal field theory correctly to identify the complex as low-spin with a configuration.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the subshell electron occupancy ( electrons in ) as the number of unpaired electrons (), overlooking the fact that the subshell has only 3 distinct spatial orbitals, which forces the fourth electron to pair up.
REASONING PATH
Your ACEpath teacher’s suggested approach- Orbital Multiplicity in $t_{2g}$ and $e_g$
In an octahedral field, contains exactly 3 degenerate orbitals (), holding a maximum of 6 electrons, while contains 2 degenerate orbitals (), holding up to 4 electrons.
Draw individual orbital boxes or dashes for the 3 orbitals before counting unpaired electrons.
- Distribute Electrons into Degenerate Orbitals
Fill degenerate orbitals singly with parallel spins first (Hund's rule); once each orbital has 1 electron, place additional electrons as spin-paired partners ().
For , place 3 unpaired electrons into the 3 boxes, then pair the 4th electron in the first box to find unpaired electrons.
CORRECTED PATH
ACEpath Teacher's DemonstrationRepresent the three degenerate orbitals as three sub-levels: .
Distribute 4 electrons into the three orbitals: the first 3 fill singly (), and the 4th pairs up in one orbital ().
Count the singly occupied orbitals: unpaired electrons.
Substitute into the spin-only formula: .
Lock it in
In an octahedral coordination complex, when does an ion adopt a low-spin configuration instead of a high-spin configuration?
When the crystal field splitting is larger than the electron-pairing energy (), typically caused by strong-field ligands like or .
Similar question
The complex ion contains iron in the oxidation state (). Given that is a strong-field ligand, write the ground-state -orbital configuration in terms of and , and calculate its theoretical spin-only magnetic moment to three significant figures.
Answer
Because is a strong-field ligand, (low-spin). All 5 electrons fill the subshell before , giving the configuration . This leaves unpaired electron. The spin-only magnetic moment is .
Compare the electron configurations and number of unpaired electrons for a octahedral metal center surrounded by: (a) weak-field ligands (e.g., ) and (b) strong-field ligands (e.g., ).
Answer
(a) Weak-field (high-spin, ): electrons occupy orbitals singly before pairing, giving configuration with unpaired electrons. (b) Strong-field (low-spin, ): electrons pair in lower-energy orbitals first, giving configuration with unpaired electrons.
An octahedral cobalt(III) complex () can be either diamagnetic () or paramagnetic. Identify the ligand field condition (strong-field vs. weak-field) that produces a diamagnetic complex, state its configuration, and determine for the alternative high-spin case.
Answer
A strong-field ligand creates a low-spin complex where all 6 electrons completely fill the lower subshell: . Because all electrons are paired, and the complex is diamagnetic. In contrast, a weak-field ligand produces a high-spin complex with configuration , which has unpaired electrons and is paramagnetic.