Resources

During an atmospheric condensation event, 18.0 g18.0\text{ g} of water vapor at 100.0∘C100.0^\circ\text{C} condenses completely into liquid droplets at 100.0∘C100.0^\circ\text{C}. Using standard thermodynamic sign conventions where heat released by the system to the surroundings is negative, calculate the thermal energy change of the water system, qsysq_{\text{sys}}, in kilojoules (kJ\text{kJ}). The enthalpy of vaporization of water is ΔHvap=40.7 kJ/mol\Delta H_{\text{vap}} = 40.7\text{ kJ/mol}, and the molar mass of water is 18.02 g/mol18.02\text{ g/mol}.

Answer and steps

Final answer

−40.7 kJ-40.7\text{ kJ}

Steps

01

Identify the Phase Change and Sign Convention

Condensation is the transition of a substance from the gas phase to the liquid phase at a constant temperature: HX2O(g)→HX2O(l)\ce{H2O(g) -> H2O(l)}

Because vaporization absorbs heat (ΔHvap>0\Delta H_{\text{vap}} > 0), the reverse process—condensation—releases heat to the surroundings (it is an exothermic process). By thermodynamic sign convention: ΔHcond=−ΔHvap=−40.7 kJ/mol\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} = -40.7\text{ kJ/mol}

Therefore, the heat flow for the system, qsysq_{\text{sys}}, must be negative.


02

Calculate the Amount of Water in Moles

The enthalpy change is given per mole of water (kJ/mol\text{kJ/mol}), so determine the number of moles (nn) from the given mass (mm) and molar mass (MM): n=mM=18.0 g18.02 g/mol≈0.9989 moln = \frac{m}{M} = \frac{18.0\text{ g}}{18.02\text{ g/mol}} \approx 0.9989\text{ mol}


03

Calculate the Thermal Energy Change (qsysq_{\text{sys}})

Multiply the number of moles by the molar enthalpy of condensation: qsys=n⋅ΔHcond=n⋅(−ΔHvap)q_{\text{sys}} = n \cdot \Delta H_{\text{cond}} = n \cdot (-\Delta H_{\text{vap}}) qsys=0.9989 mol⋅(−40.7 kJ/mol)=−40.655 kJq_{\text{sys}} = 0.9989\text{ mol} \cdot (-40.7\text{ kJ/mol}) = -40.655\text{ kJ}

Rounding to three significant figures gives: qsys=−40.7 kJq_{\text{sys}} = -40.7\text{ kJ}


Common Pitfall

A frequent error is forgetting to apply the negative sign to condensation. The value of ΔHvap\Delta H_{\text{vap}} is positive because converting liquid to gas requires energy input. Condensation releases that exact amount of energy, so qsysq_{\text{sys}} must carry a negative sign when using standard thermodynamic conventions.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that condensation is exothermic and uses a positive sign for the enthalpy change, resulting in a positive value of +40.7 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n=18.0/18.02=0.999 moln = 18.0 / 18.02 = 0.999\text{ mol}

  2. Step 2

    qsys=n×ΔHvap=0.999×40.7 kJ/mol  ⟹  qsys=40.7 kJq_{\text{sys}} = n \times \Delta H_{\text{vap}} = 0.999 \times 40.7\text{ kJ/mol} \implies q_{\text{sys}} = 40.7\text{ kJ}

    Correct

    qsys=n⋅(−ΔHvap)=0.999 mol⋅(−40.7 kJ/mol)=−40.7 kJq_{\text{sys}} = n \cdot (-\Delta H_{\text{vap}}) = 0.999\text{ mol} \cdot (-40.7\text{ kJ/mol}) = -40.7\text{ kJ}

    Condensation is the reverse of vaporization. Because gas turns into liquid by releasing heat to the surroundings, ΔHcond=−ΔHvap=−40.7 kJ/mol\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} = -40.7\text{ kJ/mol}, making qsysq_{\text{sys}} negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the molar mass of water and converted grams to moles.

You correctly multiplied the moles by the enthalpy value to find the energy magnitude.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Phase Change Enthalpy

You used the positive enthalpy of vaporization ΔHvap\Delta H_{\text{vap}} instead of assigning a negative sign for condensation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the thermodynamic sign convention for exothermic phase changes. Vaporization absorbs energy (+40.7 kJ/mol+40.7\text{ kJ/mol}), but condensation releases energy to the surroundings, requiring ΔH=−40.7 kJ/mol\Delta H = -40.7\text{ kJ/mol}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Phase Direction
  • Melting, boiling, and sublimation are endothermic (q>0q > 0). Freezing, condensation, and deposition are exothermic (q<0q < 0).

  • Before multiplying, ask whether energy must enter or leave the system to achieve the new state of matter.

Apply $\Delta H_{\text{cond}} = -\Delta H_{\text{vap}}$
  • Phase change data tables typically report positive values for endothermic directions (ΔHfus\Delta H_{\text{fus}}, ΔHvap\Delta H_{\text{vap}}).

  • When a problem states condensation or freezing, introduce a negative sign explicitly before carrying out the calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that gas turning to liquid releases thermal energy: ΔHcond=−ΔHvap=−40.7 kJ/mol\Delta H_{\text{cond}} = -\Delta H_{\text{vap}} = -40.7\text{ kJ/mol}.

  2. Multiply the moles of water by the molar enthalpy of condensation: qsys=0.9989 mol×(−40.7 kJ/mol)=−40.655 kJq_{\text{sys}} = 0.9989\text{ mol} \times (-40.7\text{ kJ/mol}) = -40.655\text{ kJ}.

  3. Round to three significant figures to obtain −40.7 kJ-40.7\text{ kJ}.

Final answer

−40.7 kJ-40.7\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical reason why condensation releases heat (intermolecular forces form as gas molecules pull together into a liquid).

  • Practice tagging phase transitions as endothermic or exothermic before setting up equations.

  • Always verify that qsysq_{\text{sys}} matches the direction of heat flow specified in standard thermodynamic sign conventions.

OverviewACEpath Teacher's Diagnosis

02 The student treats the given mass of 18.0 g as moles instead of converting grams to moles using the molar mass, yielding an erroneously large heat change of -733 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔHcond=−40.7 kJ/mol\Delta H_{\text{cond}} = -40.7\text{ kJ/mol}

  2. Step 2

    qsys=18.0 mol×(−40.7 kJ/mol)q_{\text{sys}} = 18.0\text{ mol} \times (-40.7\text{ kJ/mol})

    Correct

    n=18.0 g18.02 g/mol≈0.9989 mol  ⟹  qsys=0.9989 mol×(−40.7 kJ/mol)n = \frac{18.0\text{ g}}{18.02\text{ g/mol}} \approx 0.9989\text{ mol} \implies q_{\text{sys}} = 0.9989\text{ mol} \times (-40.7\text{ kJ/mol})

    You treated the given 18.0 g18.0\text{ g} of water as 18.0 mol18.0\text{ mol}. Because molar enthalpy is given per mole (kJ/mol\text{kJ/mol}), you must first convert grams to moles using the molar mass (18.02 g/mol18.02\text{ g/mol}).

  3. Step 3

    qsys=−732.6 kJq_{\text{sys}} = -732.6\text{ kJ}

    Correct

    qsys=−40.7 kJq_{\text{sys}} = -40.7\text{ kJ}

    Your arithmetic was carried out correctly for the substituted values, but the result is incorrect due to the molar amount error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized condensation as an exothermic process and gave the enthalpy change a negative sign.

You correctly identified and applied the formula relating amount of substance and molar enthalpy to find thermal energy change.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit/Quantity Confusion: Mass vs. Moles

You substituted the mass value of 18.0 g18.0\text{ g} with units of moles instead of converting grams to moles.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked dimensional analysis between the given mass in grams and the molar enthalpy in kJ/mol\text{kJ/mol}, skipping the intermediate conversion n=mMn = \frac{m}{M}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis of Enthalpy
  • When ΔH\Delta H is expressed in kJ/mol\text{kJ/mol}, the amount of substance must be expressed in moles (nn). When ΔH\Delta H is in J/g\text{J/g} or kJ/g\text{kJ/g}, the amount must be in grams (mm).

  • Always write out units during calculation: g×(1 molmolar mass in g)=mol\text{g} \times \left(\frac{1\text{ mol}}{\text{molar mass in g}}\right) = \text{mol}, then multiply by kJ/mol\text{kJ/mol} to arrive at kJ\text{kJ}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert mass of water to moles: n=mM=18.0 g18.02 g/mol≈0.9989 moln = \frac{m}{M} = \frac{18.0\text{ g}}{18.02\text{ g/mol}} \approx 0.9989\text{ mol}.

  2. Calculate the thermal energy change: qsys=n⋅ΔHcond=0.9989 mol×(−40.7 kJ/mol)=−40.655 kJq_{\text{sys}} = n \cdot \Delta H_{\text{cond}} = 0.9989\text{ mol} \times (-40.7\text{ kJ/mol}) = -40.655\text{ kJ}.

  3. Round to three significant figures: qsys=−40.7 kJq_{\text{sys}} = -40.7\text{ kJ}.

Final answer

−40.7 kJ-40.7\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check the units of ΔH\Delta H first to see whether it requires mass in grams or amount in moles.

  • Write full dimensional units into your equations to ensure that units cancel properly.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the mass in grams directly by the molar enthalpy of vaporization instead of converting to moles or specific latent heat, leading to an incorrect result of -733 kJ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=18.018.02=0.999 moln = \frac{18.0}{18.02} = 0.999\text{ mol}

  2. Step 2

    qsys=−nΔHvap=−0.99940.7q_{\text{sys}} = \frac{-n}{\Delta H_{\text{vap}}} = \frac{-0.999}{40.7}

    Correct

    qsys=n⋅(−ΔHvap)=0.9989 mol⋅(−40.7 kJ/mol)q_{\text{sys}} = n \cdot (-\Delta H_{\text{vap}}) = 0.9989\text{ mol} \cdot (-40.7\text{ kJ/mol})

    To calculate the total heat transfer during a phase change, you need to multiply the number of moles by the molar enthalpy (q=nΔHq = n \Delta H), rather than dividing. Checking units confirms that mol×kJmol=kJ\text{mol} \times \frac{\text{kJ}}{\text{mol}} = \text{kJ}.

  3. Step 3

    qsys=−0.0245 kJq_{\text{sys}} = -0.0245\text{ kJ}

    Correct

    qsys=−40.7 kJq_{\text{sys}} = -40.7\text{ kJ}

    This result follows directly from the division setup in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the amount of substance in moles from the given mass and molar mass.

You recognized that condensation is an exothermic process that requires a negative sign for qsysq_{\text{sys}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Operation Error (Division vs. Multiplication)

You divided moles by molar enthalpy instead of multiplying them.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the relationship between extensive heat (qq) and intensive molar enthalpy (ΔH\Delta H). Since molar enthalpy has units of kJ/mol\text{kJ/mol}, multiplying moles by kJ/mol\text{kJ/mol} is required to yield kilojoules (kJ\text{kJ}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Check
  • Total heat equals quantity times heat per unit: q=n⋅ΔHq = n \cdot \Delta H.

  • Always write down the units before computing: mol×kJmol=kJ\text{mol} \times \frac{\text{kJ}}{\text{mol}} = \text{kJ}, whereas molkJ/mol=mol2kJ\frac{\text{mol}}{\text{kJ/mol}} = \frac{\text{mol}^2}{\text{kJ}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the heat transfer equation using multiplication: qsys=n⋅ΔHcond=n⋅(−ΔHvap)q_{\text{sys}} = n \cdot \Delta H_{\text{cond}} = n \cdot (-\Delta H_{\text{vap}}).

  2. Substitute the calculated moles and the molar enthalpy: qsys=0.9989 mol×(−40.7 kJ/mol)=−40.655 kJq_{\text{sys}} = 0.9989\text{ mol} \times (-40.7\text{ kJ/mol}) = -40.655\text{ kJ}.

  3. Round to three significant figures to match the given data: qsys=−40.7 kJq_{\text{sys}} = -40.7\text{ kJ}.

Final answer

−40.7 kJ-40.7\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice checking the units of your variables using dimensional analysis whenever applying thermodynamic formulas.

  • Remember that molar enthalpy (ΔH\Delta H) is an intensive 'energy per mole' rate, so finding total extensive energy always requires multiplying by the number of moles.

Lock it in

Similar question

01

Calculate the heat change of the system, qsysq_{\text{sys}}, in kJ\text{kJ} when 36.0 g36.0\text{ g} of liquid water freezes to ice at 0.0∘C0.0^\circ\text{C}. The enthalpy of fusion of water is ΔHfus=6.01 kJ/mol\Delta H_{\text{fus}} = 6.01\text{ kJ/mol}, and the molar mass of water is 18.02 g/mol18.02\text{ g/mol}.

Answer

qsys=−12.0 kJq_{\text{sys}} = -12.0\text{ kJ}. Steps: n=36.0 g18.02 g/mol=1.998 moln = \frac{36.0\text{ g}}{18.02\text{ g/mol}} = 1.998\text{ mol}. Freezing is exothermic, so ΔHfreeze=−6.01 kJ/mol\Delta H_{\text{freeze}} = -6.01\text{ kJ/mol}. Therefore, qsys=1.998 mol×(−6.01 kJ/mol)≈−12.0 kJq_{\text{sys}} = 1.998\text{ mol} \times (-6.01\text{ kJ/mol}) \approx -12.0\text{ kJ}.

02

An unknown alcohol has a molar mass of 46.07 g/mol46.07\text{ g/mol} and an enthalpy of vaporization of ΔHvap=38.6 kJ/mol\Delta H_{\text{vap}} = 38.6\text{ kJ/mol}. If a sample of vapor condenses at its boiling point and releases 19.3 kJ19.3\text{ kJ} of heat to the surroundings, what was the mass of the alcohol condensed in grams?

Answer

23.0 g23.0\text{ g}. Steps: Since heat is released, qsys=−19.3 kJq_{\text{sys}} = -19.3\text{ kJ} and ΔHcond=−38.6 kJ/mol\Delta H_{\text{cond}} = -38.6\text{ kJ/mol}. Moles condensed n=qsysΔHcond=−19.3 kJ−38.6 kJ/mol=0.500 moln = \frac{q_{\text{sys}}}{\Delta H_{\text{cond}}} = \frac{-19.3\text{ kJ}}{-38.6\text{ kJ/mol}} = 0.500\text{ mol}. Mass m=0.500 mol×46.07 g/mol=23.0 gm = 0.500\text{ mol} \times 46.07\text{ g/mol} = 23.0\text{ g}.

03

A weather balloon detects a cloud where 250 kg250\text{ kg} of water vapor at 100.0∘C100.0^\circ\text{C} condenses into rain droplets at 100.0∘C100.0^\circ\text{C}. Taking ΔHvap=2260 kJ/kg\Delta H_{\text{vap}} = 2260\text{ kJ/kg}, determine qsysq_{\text{sys}} in megajoules (MJ\text{MJ}) and state whether the surrounding air warms up or cools down.

Answer

qsys=−565 MJq_{\text{sys}} = -565\text{ MJ}; the surrounding air warms up. Steps: For condensation, heat is released, so ΔHcond=−2260 kJ/kg\Delta H_{\text{cond}} = -2260\text{ kJ/kg}. Heat change qsys=250 kg×(−2260 kJ/kg)=−5.65×105 kJ=−565 MJq_{\text{sys}} = 250\text{ kg} \times (-2260\text{ kJ/kg}) = -5.65 \times 10^5\text{ kJ} = -565\text{ MJ}. Because the system releases heat (qsys<0q_{\text{sys}} < 0), the surrounding air absorbs this thermal energy (qsurr>0q_{\text{surr}} > 0) and warms up.

Loading workspace…