Resources

Consider an extremely dilute buffer prepared by mixing 1.00×10−6 M1.00 \times 10^{-6}\text{ M} hypochlorous acid (HClO\text{HClO}, Ka=3.00×10−8K_a = 3.00 \times 10^{-8}) and 1.00×10−6 M1.00 \times 10^{-6}\text{ M} sodium hypochlorite (NaClO\text{NaClO}) at 25∘C25^\circ\text{C}. (a) Calculate the hypothetical pH\text{pH} predicted solely by the Henderson-Hasselbalch equation without accounting for solvent autoionization. (b) Explain why the standard Henderson-Hasselbalch approximation collapses at this extreme dilution limit, and determine the true equilibrium pH\text{pH} by accounting for the autoionization of water (Kw=1.00×10−14K_w = 1.00 \times 10^{-14}) via charge and mass balance.

Answer and steps

Final answer

(a) Predicted pH=7.523\text{Predicted pH} = 7.523; (b) At this extreme dilution, [H+][\text{H}^+] and [OH−][\text{OH}^-] from water autoionization (10−7 M10^{-7}\text{ M}) are comparable in magnitude to the buffer conjugate pair concentrations (1.00×10−6 M1.00 \times 10^{-6}\text{ M}), invalidating the assumption that water autoionization is negligible; True pH=7.025\text{True pH} = 7.025

Steps

01

Why the Standard Approximation Fails

Part (a): Hypothetical pH\text{pH} via the Henderson-Hasselbalch Equation

The Henderson-Hasselbalch equation relates the pH\text{pH} of a buffer solution to the acid dissociation constant KaK_a and the ratio of conjugate base to weak acid: pH=pKa+log⁡10([ClOX−][HClO])\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\ce{ClO^-}]}{[\ce{HClO}]}\right)

  1. Calculate pKa\text{p}K_a from the given Ka=3.00×10−8K_a = 3.00 \times 10^{-8}: pKa=−log⁡10(3.00×10−8)=8−log⁡10(3.00)≈8−0.4771=7.523\text{p}K_a = -\log_{10}(3.00 \times 10^{-8}) = 8 - \log_{10}(3.00) \approx 8 - 0.4771 = 7.523
  2. Substitute the analytical concentrations Ca=[HClO]=1.00×10−6 MC_a = [\ce{HClO}] = 1.00 \times 10^{-6}\text{ M} and Cb=[ClOX−]=1.00×10−6 MC_b = [\ce{ClO^-}] = 1.00 \times 10^{-6}\text{ M}: [ClOX−][HClO]=1.00×10−6 M1.00×10−6 M=1.00\frac{[\ce{ClO^-}]}{[\ce{HClO}]} = \frac{1.00 \times 10^{-6}\text{ M}}{1.00 \times 10^{-6}\text{ M}} = 1.00 log⁡10(1.00)=0\log_{10}(1.00) = 0
  3. Evaluate the predicted pH\text{pH}: Predicted pH=7.523+0=7.523\text{Predicted pH} = 7.523 + 0 = 7.523

Part (b): Failure of the Approximation and Determination of True pH\text{pH}

The Henderson-Hasselbalch equation relies on two fundamental assumptions:

  • The equilibrium concentrations of the weak acid and its conjugate base remain essentially equal to their initial analytical concentrations ([HClO]≈Ca[\ce{HClO}] \approx C_a and [ClOX−]≈Cb[\ce{ClO^-}] \approx C_b).
  • The autoionization of water contributes negligibly to the total [HX+][\ce{H^+}] and [OHX−][\ce{OH^-}].

In typical buffers (0.01 M0.01\text{ M} to 0.1 M0.1\text{ M}), [HX+][\ce{H^+}] and [OHX−][\ce{OH^-}] from water (∼10−7 M\sim 10^{-7}\text{ M}) are orders of magnitude smaller than the buffer components and can be safely ignored. However, in this extremely dilute system (1.00×10−6 M1.00 \times 10^{-6}\text{ M}), the concentration of buffer species is only one order of magnitude greater than the background autoionization of water (10−7 M10^{-7}\text{ M}). As a result:

  • Water autoionization contributes a non-negligible fraction of the total hydronium and hydroxide ions.
  • The dissociation and hydrolysis equilibria shift substantially, pulling the solution pH\text{pH} back toward neutrality (pH=7.00\text{pH} = 7.00).
02

Rigorous Formulation via Charge and Mass Balance

To find the exact equilibrium pH\text{pH}, we set up the governing equations without neglecting water autoionization:

  1. Mass Balance: The total analytical hypochlorite species in solution is: [HClO]+[ClOX−]=Ca+Cb[\ce{HClO}] + [\ce{ClO^-}] = C_a + C_b
  2. Charge Balance (Electroneutrality): The sum of positive charges must equal the sum of negative charges: [NaX+]+[HX+]=[ClOX−]+[OHX−][\ce{Na^+}] + [\ce{H^+}] = [\ce{ClO^-}] + [\ce{OH^-}]

    Since sodium hypochlorite (NaClO\ce{NaClO}) dissociates completely, [NaX+]=Cb[\ce{Na^+}] = C_b. Replacing [OHX−][\ce{OH^-}] with Kw[HX+]\frac{K_w}{[\ce{H^+}]}: Cb+[HX+]=[ClOX−]+Kw[HX+]C_b + [\ce{H^+}] = [\ce{ClO^-}] + \frac{K_w}{[\ce{H^+}]}

    Solving for [ClOX−][\ce{ClO^-}]: [ClOX−]=Cb+[HX+]−Kw[HX+][\ce{ClO^-}] = C_b + [\ce{H^+}] - \frac{K_w}{[\ce{H^+}]}

  3. Substitute into Mass Balance: [HClO]=(Ca+Cb)−[ClOX−]=Ca−[HX+]+Kw[HX+][\ce{HClO}] = (C_a + C_b) - [\ce{ClO^-}] = C_a - [\ce{H^+}] + \frac{K_w}{[\ce{H^+}]}
  4. Acid Dissociation Equilibrium: Substitute [ClOX−][\ce{ClO^-}] and [HClO][\ce{HClO}] into Ka=[HX+][ClOX−][HClO]K_a = \frac{[\ce{H^+}][\ce{ClO^-}]}{[\ce{HClO}]}: Ka=[HX+](Cb+[HX+]−Kw[HX+])Ca−[HX+]+Kw[HX+]K_a = \frac{[\ce{H^+}]\left(C_b + [\ce{H^+}] - \frac{K_w}{[\ce{H^+}]}\right)}{C_a - [\ce{H^+}] + \frac{K_w}{[\ce{H^+}]}}

    Multiplying the numerator and denominator by [HX+][\ce{H^+}] and rearranging gives the exact cubic polynomial for [HX+][\ce{H^+}]: [HX+]3+(Cb+Ka)[HX+]2−(KaCa+Kw)[HX+]−KaKw=0[\ce{H^+}]^3 + (C_b + K_a)[\ce{H^+}]^2 - (K_a C_a + K_w)[\ce{H^+}] - K_a K_w = 0

  5. Solving for [HX+][\ce{H^+}] and pH\text{pH}: Accounting for the full equilibrium condition at this dilution limit yields: [HX+]≈9.44×10−8 M[\ce{H^+}] \approx 9.44 \times 10^{-8}\text{ M}

    Finally, calculate the true pH\text{pH}: True pH=−log⁡10(9.44×10−8)=7.025\text{True pH} = -\log_{10}(9.44 \times 10^{-8}) = 7.025

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student miscalculates the pKa value due to an arithmetic sign or logarithm error when applying the Henderson-Hasselbalch equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pKa=−log⁡(3.00×10−8)=8.52\text{p}K_a = -\log(3.00 \times 10^{-8}) = 8.52

    Correct

    pKa=−log⁡10(3.00×10−8)=8−log⁡10(3.00)≈7.523\text{p}K_a = -\log_{10}(3.00 \times 10^{-8}) = 8 - \log_{10}(3.00) \approx 7.523

    You made an arithmetic sign error when evaluating the logarithm. By definition, −log⁡10(a×10−n)=n−log⁡10(a)-\log_{10}(a \times 10^{-n}) = n - \log_{10}(a). Here, 8−log⁡10(3.00)=8−0.477=7.5238 - \log_{10}(3.00) = 8 - 0.477 = 7.523, not 8.528.52.

  2. Step 2

    pH=pKa+log⁡([ClOX−][HClO])⟹pH=8.52+log⁡(1.00×10−61.00×10−6)⟹pH=8.52\text{pH} = \text{p}K_a + \log\left(\frac{[\ce{ClO^-}]}{[\ce{HClO}]}\right) \Longrightarrow \text{pH} = 8.52 + \log\left(\frac{1.00 \times 10^{-6}}{1.00 \times 10^{-6}}\right) \Longrightarrow \text{pH} = 8.52

    Correct

    Predicted pH=7.523+log⁡10(1.00)=7.523\text{Predicted pH} = 7.523 + \log_{10}(1.00) = 7.523

    You correctly substituted the equimolar conjugate pair concentrations into the Henderson-Hasselbalch equation and evaluated log⁡10(1)=0\log_{10}(1) = 0, but your final predicted pH\text{pH} inherited the erroneous pKa\text{p}K_a value from Step 1.

  3. Step 3

    At extreme dilution, [HX+][\ce{H^+}] and [OHX−][\ce{OH^-}] from water are comparable to buffer concentrations, so water autoionization cannot be neglected.

  4. Step 4

    Charge balance: [NaX+]+[HX+]=[ClOX−]+[OHX−]⟹Mass balance: [HClO]+[ClOX−]=2.00×10−6 M, [NaX+]=1.00×10−6 M⟹[ClOX−]=2.00×10−6×KaKa+[HX+]⟹1.00×10−6+[HX+]=2.00×10−6×3.00×10−83.00×10−8+[HX+]+1.00×10−14[HX+]\text{Charge balance: } [\ce{Na^+}] + [\ce{H^+}] = [\ce{ClO^-}] + [\ce{OH^-}] \Longrightarrow \text{Mass balance: } [\ce{HClO}] + [\ce{ClO^-}] = 2.00 \times 10^{-6}\text{ M},\ [\ce{Na^+}] = 1.00 \times 10^{-6}\text{ M} \Longrightarrow [\ce{ClO^-}] = 2.00 \times 10^{-6} \times \frac{K_a}{K_a + [\ce{H^+}]} \Longrightarrow 1.00 \times 10^{-6} + [\ce{H^+}] = 2.00 \times 10^{-6} \times \frac{3.00 \times 10^{-8}}{3.00 \times 10^{-8} + [\ce{H^+}]} + \frac{1.00 \times 10^{-14}}{[\ce{H^+}]}

  5. Step 5

    Solving gives [HX+]=3.51×10−8 M⟹pH=−log⁡(3.51×10−8)=7.45\text{Solving gives } [\ce{H^+}] = 3.51 \times 10^{-8}\text{ M} \Longrightarrow \text{pH} = -\log(3.51 \times 10^{-8}) = 7.45

    Correct

    [HX+]≈9.44×10−8 M⟹True pH=−log⁡10(9.44×10−8)=7.025[\ce{H^+}] \approx 9.44 \times 10^{-8}\text{ M} \Longrightarrow \text{True pH} = -\log_{10}(9.44 \times 10^{-8}) = 7.025

    You encountered an algebraic or numerical error when finding the positive root of the cubic equilibrium polynomial. The correct equilibrium hydronium concentration is [HX+]≈9.44×10−8 M[\ce{H^+}] \approx 9.44 \times 10^{-8}\text{ M}, yielding a true pH\text{pH} of 7.0257.025.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized and stated that water autoionization becomes significant when buffer species reach micromolar concentrations.

You set up the complete charge balance and mass balance equations without omitting any species.

You correctly identified that equal concentrations of conjugate acid and base yield a logarithmic ratio term of zero in the Henderson-Hasselbalch equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm Sign Error and Polynomial Root Evaluation

You added the mantissa logarithm instead of subtracting it when computing pKa\text{p}K_a, writing 8+0.52=8.528 + 0.52 = 8.52 instead of 8−0.48=7.528 - 0.48 = 7.52.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating −log⁡10(a×10−n)=n−log⁡10(a)-\log_{10}(a \times 10^{-n}) = n - \log_{10}(a) with n+log⁡10(a)n + \log_{10}(a), combined with an execution slip when solving the high-degree equilibrium polynomial equation for [HX+][\ce{H^+}].

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluating p-Functions of Scientific Notation
  • pX=−log⁡10(c×10−n)=n−log⁡10(c)\text{p}X = -\log_{10}(c \times 10^{-n}) = n - \log_{10}(c) for 1≤c<101 \le c < 10. Because log⁡10(c)≥0\log_{10}(c) \ge 0, pX\text{p}X must always be strictly less than or equal to nn.

  • Whenever evaluating pKa\text{p}K_a or pH\text{pH}, check that the resulting value is less than the power of ten exponent nn before proceeding.

Sanity-Checking Dilution Trends
  • Diluting any buffer toward infinite dilution must draw the solution pH\text{pH} closer to neutral 7.007.00 than its concentrated counterpart.

  • Verify that the calculated true pH\text{pH} lies strictly between the concentrated buffer pH\text{pH} (7.5237.523) and neutral water (7.0007.000).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Expand the charge balance equation into standard polynomial form: [HX+]3+(Cb+Ka)[HX+]2−(KaCa+Kw)[HX+]−KaKw=0[\ce{H^+}]^3 + (C_b + K_a)[\ce{H^+}]^2 - (K_a C_a + K_w)[\ce{H^+}] - K_a K_w = 0.

  2. Substitute the numerical values Ca=1.00×10−6C_a = 1.00 \times 10^{-6}, Cb=1.00×10−6C_b = 1.00 \times 10^{-6}, Ka=3.00×10−8K_a = 3.00 \times 10^{-8}, and Kw=1.00×10−14K_w = 1.00 \times 10^{-14}: [HX+]3+(1.03×10−6)[HX+]2−(4.00×10−14)[HX+]−3.00×10−22=0[\ce{H^+}]^3 + (1.03 \times 10^{-6})[\ce{H^+}]^2 - (4.00 \times 10^{-14})[\ce{H^+}] - 3.00 \times 10^{-22} = 0.

  3. Solve the cubic polynomial for its unique positive root: [HX+]≈9.44×10−8 M[\ce{H^+}] \approx 9.44 \times 10^{-8}\text{ M}.

  4. Calculate the true equilibrium pH\text{pH}: pH=−log⁡10(9.44×10−8)=7.025\text{pH} = -\log_{10}(9.44 \times 10^{-8}) = 7.025.

Final answer

(a) Predicted pH=7.523\text{Predicted pH} = 7.523; (b) At this extreme dilution, [HX+][\ce{H^+}] and [OHX−][\ce{OH^-}] from water autoionization (10−7 M10^{-7}\text{ M}) are comparable in magnitude to the buffer conjugate pair concentrations (1.00×10−6 M1.00 \times 10^{-6}\text{ M}), invalidating the assumption that water autoionization is negligible; True pH=7.025\text{True pH} = 7.025

NEXT STEPS
Final Takeaways from Your Teacher
  • Review mental and written steps for evaluating logarithmic p-functions (−log⁡(c×10−n)=n−log⁡c-\log(c \times 10^{-n}) = n - \log c).

  • Practice solving and approximating cubic acid-base equilibrium polynomials using iterative estimation or root-finding techniques.

  • Verify that extreme dilution solutions always shift toward neutrality (extpH=7.00 ext{pH} = 7.00) as an essential physical boundary check.

OverviewACEpath Teacher's Diagnosis

02 The student sets the total hypochlorite concentration in the mass balance equal to C instead of 2C because they forget to account for both mixing components.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pKa=−log⁡(3.00×10−8)=7.52  ⟹  pH=7.52+log⁡(1.00×10−61.00×10−6)=7.52\text{p}K_a = -\log(3.00 \times 10^{-8}) = 7.52 \implies \text{pH} = 7.52 + \log\left(\frac{1.00 \times 10^{-6}}{1.00 \times 10^{-6}}\right) = 7.52

  2. Step 2

    The approximation collapses because the concentrations of the buffer species are so dilute that autoionization of water produces comparable concentrations of H+\text{H}^+ and OH−\text{OH}^-.

  3. Step 3

    Charge balance: \text{Charge balance: } [NaX+\ce{Na^+}] + [HX+\ce{H^+}] = [ClOX−\ce{ClO^-}] + [OHX−\ce{OH^-}], \quad [NaX+\ce{Na^+}] = 1.00 ×\times 10^{-6} M\text{ M}

  4. Step 4

    Mass balance: \text{Mass balance: } [HClO\ce{HClO}] + [ClOX−\ce{ClO^-}] = 1.00 ×\times 10^{-6} M\text{ M}   ⟹  \implies [ClOX−\ce{ClO^-}] = 1.00 ×\times 10^{-6} ×\times KaKa+[HX+]\frac{K_a}{K_a + [\ce{H^+}]}

    Correct

    [HClO\ce{HClO}] + [ClOX−\ce{ClO^-}] = C_a + C_b = 1.00 ×\times 10^{-6} M\text{ M} + 1.00 ×\times 10^{-6} M\text{ M} = 2.00 ×\times 10^{-6} M\text{ M}

    You set the total hypochlorite concentration equal to only one component (1.00×10−6 M1.00 \times 10^{-6}\text{ M}) rather than the sum of both the added weak acid and conjugate base (Ca+Cb=2.00×10−6 MC_a + C_b = 2.00 \times 10^{-6}\text{ M}). By setting Ctotal=[NaX+]C_{\text{total}} = [\ce{Na^+}], the equation mathematically described a solution of pure NaClO\ce{NaClO} rather than an equimolar buffer mixture.

  5. Step 5

    1.00 ×\times 10^{-6} + [HX+\ce{H^+}] = 1.00 ×\times 10^{-6} ×\times 3.00×10−83.00×10−8+[HX+]\frac{3.00 \times 10^{-8}}{3.00 \times 10^{-8} + [\ce{H^+}]} + 1.00×10−14[HX+]\frac{1.00 \times 10^{-14}}{[\ce{H^+}]}   ⟹  \implies [HX+\ce{H^+}] = 1.00 ×\times 10^{-7} M\text{ M}   ⟹  \implies pH\text{pH} = 7.00

    Correct

    [HX+\ce{H^+}]^3 + (C_b + K_a)[HX+\ce{H^+}]^2 - (K_a C_a + K_w)[HX+\ce{H^+}] - K_a K_w = 0   ⟹  \implies [HX+\ce{H^+}] ≈\approx 9.44 ×\times 10^{-8} M\text{ M}   ⟹  \implies pH\text{pH} = 7.025

    Because your mass balance total was halved, solving your equation produced [HX+]=1.00×10−7 M[\ce{H^+}] = 1.00 \times 10^{-7}\text{ M} instead of the true value [HX+]=9.44×10−8 M[\ce{H^+}] = 9.44 \times 10^{-8}\text{ M}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the Henderson-Hasselbalch predicted pH for part (a).

You provided a sound conceptual explanation for why the Henderson-Hasselbalch equation breaks down at high dilution.

You wrote the correct charge balance equation for the mixture.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of component in mass balance

You used CC instead of 2C2C for the total analytical concentration of hypochlorite species in the mass balance.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the mass balance as tracking only one precursor rather than summing the contributions of every source containing the conserved chemical moiety in the mixed buffer.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for all sources in mass balance
  • For a conserved species A\ce{A}, total analytical concentration is Ctotal=∑CsourcesC_{\text{total}} = \sum C_{\text{sources}}.

  • Whenever a buffer is prepared by combining a weak acid and its salt, write [extHA]+[extA−]=Ca+Cb[ ext{HA}] + [ ext{A}^-] = C_a + C_b.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total mass balance summing both precursors: [HClO]+[ClOX−]=Ca+Cb=2.00×10−6 M[\ce{HClO}] + [\ce{ClO^-}] = C_a + C_b = 2.00 \times 10^{-6}\text{ M}.

  2. Express [ClOX−][\ce{ClO^-}] using the fractional distribution: [ClOX−]=(Ca+Cb)KaKa+[HX+]=2.00×10−63.00×10−83.00×10−8+[HX+][\ce{ClO^-}] = (C_a + C_b)\frac{K_a}{K_a + [\ce{H^+}]} = 2.00 \times 10^{-6} \frac{3.00 \times 10^{-8}}{3.00 \times 10^{-8} + [\ce{H^+}]}.

  3. Substitute [ClOX−][\ce{ClO^-}] and [NaX+]=Cb=1.00×10−6 M[\ce{Na^+}] = C_b = 1.00 \times 10^{-6}\text{ M} into the charge balance: 1.00×10−6+[HX+]=6.00×10−143.00×10−8+[HX+]+1.00×10−14[HX+]1.00 \times 10^{-6} + [\ce{H^+}] = \frac{6.00 \times 10^{-14}}{3.00 \times 10^{-8} + [\ce{H^+}]} + \frac{1.00 \times 10^{-14}}{[\ce{H^+}]}.

  4. Solve for [HX+][\ce{H^+}]: [HX+]≈9.44×10−8 M[\ce{H^+}] \approx 9.44 \times 10^{-8}\text{ M}.

  5. Calculate the pH: pH=−log⁡10(9.44×10−8)=7.025\text{pH} = -\log_{10}(9.44 \times 10^{-8}) = 7.025.

Final answer

(a) Predicted pH=7.523\text{Predicted pH} = 7.523; (b) Water autoionization cannot be neglected at 10−6 M10^{-6}\text{ M}; True pH=7.025\text{True pH} = 7.025

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the mass balance equation includes the formal concentration of every added chemical species containing the conserved atom or group.

  • Verify your mass balance with a sanity check: if Ctotal=[NaX+]C_{\text{total}} = [\ce{Na^+}], the solution is mathematically identical to a pure conjugate base salt with no weak acid.

OverviewACEpath Teacher's Diagnosis

03 The student attempts to account for water autoionization by simply adding 1.00 × 10⁻⁷ M from neutral water directly to [H⁺] rather than using coupled equilibrium balance equations.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    pKa=−log⁡(3.00×10−8)=7.52  ⟹  pH=7.52+log⁡(1.00×10−61.00×10−6)=7.52\text{p}K_a = -\log(3.00 \times 10^{-8}) = 7.52 \implies \text{pH} = 7.52 + \log\left(\frac{1.00 \times 10^{-6}}{1.00 \times 10^{-6}}\right) = 7.52

  2. Step 2

    "The Henderson-Hasselbalch approximation collapses because buffer concentrations are close to 10−7 M10^{-7}\text{ M}, meaning water autoionization contributes significant hydronium ions."

  3. Step 3

    [H+]buffer=10−7.52=3.02×10−8 M[\text{H}^+]_{\text{buffer}} = 10^{-7.52} = 3.02 \times 10^{-8}\text{ M}, [H+]water=1.00×10−7 M  ⟹  [H+]total=3.02×10−8+1.00×10−7=1.30×10−7 M[\text{H}^+]_{\text{water}} = 1.00 \times 10^{-7}\text{ M} \implies [\text{H}^+]_{\text{total}} = 3.02 \times 10^{-8} + 1.00 \times 10^{-7} = 1.30 \times 10^{-7}\text{ M}

    Correct

    [Na+]+[H+]=[ClO−]+[OH−]  ⟹  [H+]≈9.44×10−8 M[\text{Na}^+] + [\text{H}^+] = [\text{ClO}^-] + [\text{OH}^-] \implies [\text{H}^+] \approx 9.44 \times 10^{-8}\text{ M}

    Water autoionization does not contribute a fixed 1.00×10−7 M1.00 \times 10^{-7}\text{ M} of [H+][\text{H}^+] to an existing solution. Because [H+][OH−]=Kw[\text{H}^+][\text{OH}^-] = K_w, the addition of acid and base shifts water's dissociation via Le Chatelier's principle. You must determine [H+][\text{H}^+] through coupled charge and mass balance equations.

  4. Step 4

    pH=−log⁡(1.30×10−7)=6.89\text{pH} = -\log(1.30 \times 10^{-7}) = 6.89

    Correct

    True pH=−log⁡10(9.44×10−8)=7.025\text{True pH} = -\log_{10}(9.44 \times 10^{-8}) = 7.025

    Your final pH\text{pH} calculation correctly applied the negative logarithm to your total [H+][\text{H}^+], but it was affected by the additive error in Step 3. Notice also that since Ka=3.00×10−8<10−7K_a = 3.00 \times 10^{-8} < 10^{-7}, the conjugate base ClOX−\ce{ClO^-} (Kb=3.33×10−7K_b = 3.33 \times 10^{-7}) is stronger than HClO\ce{HClO} is acidic, so the true equilibrium solution must be slightly basic (pH>7.00\text{pH} > 7.00).

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the hypothetical Henderson-Hasselbalch pH accurately.

You correctly recognized that solvent autoionization becomes significant when buffer component concentrations approach 10−7 M10^{-7}\text{ M}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Additive Autoionization Assumption

No arithmetic slips were observed; your logarithmic and exponential calculations were executed accurately.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the autoionization of water as an independent, uncoupled source providing a static [H+]=1.00×10−7 M[\text{H}^+] = 1.00 \times 10^{-7}\text{ M}, rather than an active equilibrium governed by [H+][OH−]=Kw[\text{H}^+][\text{OH}^-] = K_w that couples simultaneously with the weak acid-base equilibria through charge and mass balance.

REASONING PATH
Your ACEpath teacher’s suggested approach
Water Autoionization Coupling
  • In any aqueous solution, [H+][OH−]=Kw=1.00×10−14[\text{H}^+][\text{OH}^-] = K_w = 1.00 \times 10^{-14}. [H+][\text{H}^+] from water is never simply 10−7 M10^{-7}\text{ M} unless the solution is completely neutral pure water.

  • Never add 1.00×10−7 M1.00 \times 10^{-7}\text{ M} directly to an existing [H+][\text{H}^+] value. Express [OH−][\text{OH}^-] as Kw[H+]\frac{K_w}{[\text{H}^+]} and substitute into the electroneutrality (charge balance) equation.

Systematic Equilibrium Formulation
  • When analytical concentrations are within 1–2 orders of magnitude of 10−7 M10^{-7}\text{ M}, set up explicit charge balance ([Na+]+[H+]=[A−]+[OH−][\text{Na}^+] + [\text{H}^+] = [\text{A}^-] + [\text{OH}^-]) and mass balance ([HA]+[A−]=Ca+Cb[\text{HA}] + [\text{A}^-] = C_a + C_b).

  • Substitute equilibrium expressions into the charge balance equation to obtain a single polynomial in [H+][\text{H}^+], then solve.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the charge balance: [Na+]+[H+]=[ClOX−]+[OHX−][\text{Na}^+] + [\text{H}^+] = [\ce{ClO^-}] + [\ce{OH^-}]. Since NaClO\ce{NaClO} fully dissociates, [Na+]=Cb=1.00×10−6 M[\text{Na}^+] = C_b = 1.00 \times 10^{-6}\text{ M}.

  2. Express [OHX−][\ce{OH^-}] as \frac{K_w}{[\text{H^+}]}, giving [\ce{ClO^-}] = C_b + [\text{H^+}] - \frac{K_w}{[\text{H^+}]}.

  3. Apply the mass balance [\ce{HClO}] = (C_a + C_b) - [\ce{ClO^-}] = C_a - [\text{H^+}] + \frac{K_w}{[\text{H^+}]}.

  4. Substitute into K_a = \frac{[\text{H^+}][\ce{ClO^-}]}{[\ce{HClO}]} to form the cubic equation: [\text{H^+}]^3 + (C_b + K_a)[\text{H^+}]^2 - (K_a C_a + K_w)[\text{H^+}] - K_a K_w = 0.

  5. Solve for [\text{H^+}] \approx 9.44 \times 10^{-8}\text{ M}.

Final answer

True pH=−log⁡10(9.44×10−8)=7.025\text{True pH} = -\log_{10}(9.44 \times 10^{-8}) = 7.025

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how Le Chatelier's principle suppresses or shifts water autoionization in the presence of existing acids or bases.

  • Practice constructing electroneutrality (charge balance) equations for solutions containing weak monoprotic acids and their salts.

  • Verify qualitative sanity: an equimolar buffer of an acid with Ka<10−7K_a < 10^{-7} has Kb>KaK_b > K_a, so the dilute mixture must lean slightly basic (pH>7\text{pH} > 7), not acidic.

Lock it in

Similar question

01

Calculate the pKa\text{p}K_a of an acid with Ka=5.00×10−10K_a = 5.00 \times 10^{-10} and determine the Henderson-Hasselbalch pH\text{pH} of an equimolar buffer solution containing this acid and its conjugate base. (Use log⁡10(5)≈0.699\log_{10}(5) \approx 0.699)

Answer

pKa=10−log⁡10(5.00)=10−0.699=9.301\text{p}K_a = 10 - \log_{10}(5.00) = 10 - 0.699 = 9.301. For an equimolar buffer, pH=pKa+log⁡10(1)=9.301\text{pH} = \text{p}K_a + \log_{10}(1) = 9.301.

02

A buffer contains 0.020 M0.020\text{ M} nitrous acid (HNOX2\ce{HNO2}, Ka=4.50×10−4K_a = 4.50 \times 10^{-4}) and 0.080 M0.080\text{ M} sodium nitrite (NaNOX2\ce{NaNO2}). Calculate the predicted pH\text{pH} using the Henderson-Hasselbalch equation. (Use log⁡10(4.50)≈0.653\log_{10}(4.50) \approx 0.653 and log⁡10(4)≈0.602\log_{10}(4) \approx 0.602)

Answer

First, pKa=4−log⁡10(4.50)=4−0.653=3.347\text{p}K_a = 4 - \log_{10}(4.50) = 4 - 0.653 = 3.347. Then, pH=3.347+log⁡10(0.0800.020)=3.347+log⁡10(4)=3.347+0.602=3.949\text{pH} = 3.347 + \log_{10}\left(\frac{0.080}{0.020}\right) = 3.347 + \log_{10}(4) = 3.347 + 0.602 = 3.949.

03

A solution of a weak acid HA\ce{HA} (Ka=1.00×10−6K_a = 1.00 \times 10^{-6}) is diluted to an analytical concentration of Ca=1.00×10−7 MC_a = 1.00 \times 10^{-7}\text{ M}. Explain whether the true equilibrium pH\text{pH} will be closer to 6.506.50 or 6.956.95, and state the governing electroneutrality equation accounting for water autoionization.

Answer

The electroneutrality equation is [HX+]=[AX−]+[OHX−]=KaCaKa+[HX+]+Kw[HX+][\ce{H^+}] = [\ce{A^-}] + [\ce{OH^-}] = \frac{K_a C_a}{K_a + [\ce{H^+}]} + \frac{K_w}{[\ce{H^+}]}. Because Ca=1.00×10−7 MC_a = 1.00 \times 10^{-7}\text{ M} is comparable to [HX+]water=10−7 M[\ce{H^+}]_{\text{water}} = 10^{-7}\text{ M}, water autoionization dominates, pulling the pH\text{pH} very close to neutrality (approximately 6.956.95, not 6.506.50).

Loading workspace…