Resources

A sealed 2.50 L2.50\text{ L} rigid reaction flask at 298 K298\text{ K} contains a mixture of methane gas (CH4\text{CH}_4) and propane gas (C3H8\text{C}_3\text{H}_8) exerting a total pressure of 1.45 atm1.45\text{ atm}. The total mass of the hydrocarbon mixture inside the vessel is 3.20 g3.20\text{ g}. Treating the gases as ideal with R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}): (a) determine the total number of gas moles in the flask, (b) calculate the individual mole fractions of methane and propane, and (c) find the total number of individual hydrogen atoms contained within the vessel.

Answer and steps

Final answer

(a) 0.148 mol0.148\text{ mol}, (b) XCH4=0.838X_{\text{CH}_4} = 0.838, XC3H8=0.162X_{\text{C}_3\text{H}_8} = 0.162, (c) 5.44×1023 H atoms5.44 \times 10^{23}\text{ H atoms}

Steps

Part (a): Determining the Total Number of Gas Moles

To find the total amount of gas in the flask, apply the ideal gas law:

PV=ntotalRTP V = n_{\text{total}} R T

Rearranging for the total number of moles, ntotaln_{\text{total}}:

ntotal=PVRTn_{\text{total}} = \frac{P V}{R T}

Substitute the given values:

  • Total pressure, P=1.45 atmP = 1.45\text{ atm}
  • Flask volume, V=2.50 LV = 2.50\text{ L}
  • Temperature, T=298 KT = 298\text{ K}
  • Ideal gas constant, R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})

ntotal=(1.45 atm)(2.50 L)(0.08206 L⋅atm/(mol⋅K))(298 K)=3.62524.45388 mol≈0.148 moln_{\text{total}} = \frac{(1.45\text{ atm})(2.50\text{ L})}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}))(298\text{ K})} = \frac{3.625}{24.45388}\text{ mol} \approx 0.148\text{ mol}


Part (b): Calculating the Individual Mole Fractions

Let nCHX4n_{\ce{CH4}} and nCX3HX8n_{\ce{C3H8}} represent the moles of methane and propane, respectively.

  1. Molar Masses:

    • Molar mass of methane (CHX4\ce{CH4}): MCHX4≈16.04 g/molM_{\ce{CH4}} \approx 16.04\text{ g/mol}
    • Molar mass of propane (CX3HX8\ce{C3H8}): MCX3HX8≈44.10 g/molM_{\ce{C3H8}} \approx 44.10\text{ g/mol}
  2. System of Equations: The total moles and total mass of the mixture provide two linear relationships: {nCHX4+nCX3HX8=0.148 mol,16.04 nCHX4+44.10 nCX3HX8=3.20 g\lbrace n_{\ce{CH4}} + n_{\ce{C3H8}} = 0.148\text{ mol},\quad 16.04\,n_{\ce{CH4}} + 44.10\,n_{\ce{C3H8}} = 3.20\text{ g}
  3. Solving for Mole Fractions: The mole fraction of a component is defined as Xi=nintotalX_i = \frac{n_i}{n_{\text{total}}}.

    Solving the mass and mole balance gives: nCHX4≈0.124 mol,nCX3HX8≈0.024 moln_{\ce{CH4}} \approx 0.124\text{ mol}, \quad n_{\ce{C3H8}} \approx 0.024\text{ mol}

    Now, compute the individual mole fractions: XCHX4=nCHX4ntotal=0.124 mol0.148 mol≈0.838X_{\ce{CH4}} = \frac{n_{\ce{CH4}}}{n_{\text{total}}} = \frac{0.124\text{ mol}}{0.148\text{ mol}} \approx 0.838 XCX3HX8=nCX3HX8ntotal=1−XCHX4=1−0.838=0.162X_{\ce{C3H8}} = \frac{n_{\ce{C3H8}}}{n_{\text{total}}} = 1 - X_{\ce{CH4}} = 1 - 0.838 = 0.162


Part (c): Finding the Total Number of Individual Hydrogen Atoms

Each molecule of methane (CHX4\ce{CH4}) contains 44 hydrogen atoms, and each molecule of propane (CX3HX8\ce{C3H8}) contains 88 hydrogen atoms.

  1. Calculate the Total Moles of Hydrogen Atoms (nHn_{\ce{H}}): nH=4 nCHX4+8 nCX3HX8n_{\ce{H}} = 4\,n_{\ce{CH4}} + 8\,n_{\ce{C3H8}}
  2. Convert Moles of H\ce{H} to Individual Atoms: Using Avogadro's constant, NA=6.022×1023 atoms/molN_A = 6.022 \times 10^{23}\text{ atoms/mol}: Total H atoms=nH⋅NA\text{Total H atoms} = n_{\ce{H}} \cdot N_A

    Substituting the stoichiometric contributions: Total H atoms=5.44×1023 H atoms\text{Total H atoms} = 5.44 \times 10^{23}\text{ H atoms}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the molar mass using an unweighted simple average of the two components instead of using a system of equations, leading to incorrect mole fractions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ntotal=PVRT=1.45×2.500.08206×298=0.148 moln_{\text{total}} = \frac{PV}{RT} = \frac{1.45 \times 2.50}{0.08206 \times 298} = 0.148\text{ mol}

  2. Step 2

    Average molar mass=16.04+44.102=30.07 g/mol  ⟹  XCHX4=0.500, XCX3HX8=0.500\text{Average molar mass} = \frac{16.04 + 44.10}{2} = 30.07\text{ g/mol} \implies X_{\ce{CH4}} = 0.500,\ X_{\ce{C3H8}} = 0.500

    Correct

    {nCHX4+nCX3HX8=0.14816.04 nCHX4+44.10 nCX3HX8=3.20  ⟹  XCHX4≈0.838, XCX3HX8≈0.162\begin{cases} n_{\ce{CH4}} + n_{\ce{C3H8}} = 0.148\\ 16.04\,n_{\ce{CH4}} + 44.10\,n_{\ce{C3H8}} = 3.20 \end{cases} \implies X_{\ce{CH4}} \approx 0.838,\ X_{\ce{C3H8}} \approx 0.162

    You assumed equal contributions and took a simple arithmetic average of the molar masses. In a gas mixture, the components are not necessarily present in equal molar amounts; you need to solve the simultaneous mole-balance and mass-balance equations using the given total mass of 3.20 g3.20\text{ g}.

  3. Step 3

    nCHX4=nCX3HX8=0.074 mol  ⟹  Moles of H=4(0.074)+8(0.074)=0.888 mol  ⟹  Number of H atoms=0.888×6.022×1023=5.35×1023 atomsn_{\ce{CH4}} = n_{\ce{C3H8}} = 0.074\text{ mol} \implies \text{Moles of H} = 4(0.074) + 8(0.074) = 0.888\text{ mol} \implies \text{Number of H atoms} = 0.888 \times 6.022 \times 10^{23} = 5.35 \times 10^{23}\text{ atoms}

    Correct

    nH=4(0.124 mol)+8(0.024 mol)=0.904 mol  ⟹  Total H atoms=0.904×6.022×1023≈5.44×1023 atomsn_{\ce{H}} = 4(0.124\text{ mol}) + 8(0.024\text{ mol}) = 0.904\text{ mol} \implies \text{Total H atoms} = 0.904 \times 6.022 \times 10^{23} \approx 5.44 \times 10^{23}\text{ atoms}

    Your stoichiometric method and conversion using Avogadro's number were completely correct, but the final numerical value was affected by the incorrect mole fractions from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas law to calculate the total moles of gas in the flask.

You correctly used stoichiometric coefficients (4 H4\text{ H} per CHX4\ce{CH4} and 8 H8\text{ H} per CX3HX8\ce{C3H8}) to find the total moles of hydrogen.

You correctly multiplied moles by Avogadro's number to determine the final particle count.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unweighted Average Mixture Assumption

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that unknown components in a mixture contribute equally (X1=X2=0.50X_1 = X_2 = 0.50) and averaged their molar masses, rather than using the provided total mass (3.20 g3.20\text{ g}) to set up a two-variable system of linear equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apparent Molar Mass of a Mixture
  • The average molar mass of a mixture is the total mass divided by total moles: Mˉ=mtotalntotal\bar{M} = \frac{m_{\text{total}}}{n_{\text{total}}}, which equals the mole-fraction-weighted sum ∑XiMi\sum X_i M_i.

  • Always find Mˉ=mtotalntotal\bar{M} = \frac{m_{\text{total}}}{n_{\text{total}}} directly from the given total mass and moles, never by taking a simple average M1+M22\frac{M_1 + M_2}{2}.

Setting Up Mixture Equations
  • For a binary mixture with total moles ntotaln_{\text{total}} and total mass mtotalm_{\text{total}}: n1+n2=ntotaln_1 + n_2 = n_{\text{total}} and M1n1+M2n2=mtotalM_1 n_1 + M_2 n_2 = m_{\text{total}}.

  • Substitute n2=ntotal−n1n_2 = n_{\text{total}} - n_1 into the mass equation to solve for the individual molar amounts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the system of equations with ntotal=0.148 moln_{\text{total}} = 0.148\text{ mol} and mtotal=3.20 gm_{\text{total}} = 3.20\text{ g}: nCHX4+nCX3HX8=0.148n_{\ce{CH4}} + n_{\ce{C3H8}} = 0.148 and 16.04 nCHX4+44.10 nCX3HX8=3.2016.04\,n_{\ce{CH4}} + 44.10\,n_{\ce{C3H8}} = 3.20.

  2. Substitute nCX3HX8=0.148−nCHX4n_{\ce{C3H8}} = 0.148 - n_{\ce{CH4}} into the mass equation: 16.04 nCHX4+44.10(0.148−nCHX4)=3.2016.04\,n_{\ce{CH4}} + 44.10(0.148 - n_{\ce{CH4}}) = 3.20.

  3. Solve for moles: −28.06 nCHX4=3.20−6.5268=−3.3268  ⟹  nCHX4≈0.124 mol-28.06\,n_{\ce{CH4}} = 3.20 - 6.5268 = -3.3268 \implies n_{\ce{CH4}} \approx 0.124\text{ mol}, so nCX3HX8=0.148−0.124=0.024 moln_{\ce{C3H8}} = 0.148 - 0.124 = 0.024\text{ mol}.

  4. Calculate mole fractions: XCHX4=0.1240.148≈0.838X_{\ce{CH4}} = \frac{0.124}{0.148} \approx 0.838 and XCX3HX8=0.0240.148≈0.162X_{\ce{C3H8}} = \frac{0.024}{0.148} \approx 0.162.

  5. Find total hydrogen atoms: nH=4(0.124)+8(0.024)=0.904 mol H atoms  ⟹  NH=0.904×6.022×1023≈5.44×1023 H atomsn_{\ce{H}} = 4(0.124) + 8(0.024) = 0.904\text{ mol H atoms} \implies N_{\ce{H}} = 0.904 \times 6.022 \times 10^{23} \approx 5.44 \times 10^{23}\text{ H atoms}.

Final answer

(a) 0.148 mol0.148\text{ mol}, (b) XCHX4=0.838X_{\ce{CH4}} = 0.838, XCX3HX8=0.162X_{\ce{C3H8}} = 0.162, (c) 5.44×1023 H atoms5.44 \times 10^{23}\text{ H atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to calculate the average molar mass of a real mixture using total mass divided by total moles (ar{M} = m_{\text{total}}/n_{\text{total}}).

  • Practice solving 2-component mixture problems using simultaneous mole-balance and mass-balance equations.

  • Check your calculated composition against given physical constraints: if the apparent molar mass is close to 16 g/mol16\text{ g/mol}, the mixture must be predominantly methane.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the subscript stoichiometric factors for hydrogen in the two hydrocarbons, using 8 for methane and 4 for propane.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ntotal=PVRT=1.45×2.500.08206×298=0.148 moln_{\text{total}} = \frac{PV}{RT} = \frac{1.45 \times 2.50}{0.08206 \times 298} = 0.148\text{ mol}

  2. Step 2

    nm+np=0.148  ⟹  16.04nm+44.10np=3.20  ⟹  16.04(0.148−np)+44.10np=3.20  ⟹  28.06np=0.826  ⟹  np=0.0294 mol,nm=0.1186 mol  ⟹  XCHX4=0.11860.148=0.801,XCX3HX8=0.02940.148=0.199n_m + n_p = 0.148 \implies 16.04 n_m + 44.10 n_p = 3.20 \implies 16.04(0.148 - n_p) + 44.10 n_p = 3.20 \implies 28.06 n_p = 0.826 \implies n_p = 0.0294\text{ mol}, n_m = 0.1186\text{ mol} \implies X_{\ce{CH4}} = \frac{0.1186}{0.148} = 0.801, X_{\ce{C3H8}} = \frac{0.0294}{0.148} = 0.199

  3. Step 3

    Moles of H=8(nCHX4)+4(nCX3HX8)=8(0.1186)+4(0.0294)=0.9488+0.1176=1.066 mol\text{Moles of H} = 8(n_{\ce{CH4}}) + 4(n_{\ce{C3H8}}) = 8(0.1186) + 4(0.0294) = 0.9488 + 0.1176 = 1.066\text{ mol}

    Correct

    nH=4(nCHX4)+8(nCX3HX8)=4(0.1186 mol)+8(0.0294 mol)=0.4744+0.2352=0.710 moln_{\ce{H}} = 4(n_{\ce{CH4}}) + 8(n_{\ce{C3H8}}) = 4(0.1186\text{ mol}) + 8(0.0294\text{ mol}) = 0.4744 + 0.2352 = 0.710\text{ mol}

    You inverted the chemical subscripts: each molecule of methane (CHX4\ce{CH4}) contributes 44 hydrogen atoms, while each molecule of propane (CX3HX8\ce{C3H8}) contributes 88 hydrogen atoms.

  4. Step 4

    Number of H atoms=1.066×6.022×1023=6.42×1023 atoms\text{Number of H atoms} = 1.066 \times 6.022 \times 10^{23} = 6.42 \times 10^{23}\text{ atoms}

    Correct

    Total H atoms=nH×NA=0.710 mol×6.022×1023 atoms/mol≈4.28×1023 atoms\text{Total H atoms} = n_{\ce{H}} \times N_A = 0.710\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} \approx 4.28 \times 10^{23}\text{ atoms}

    You correctly multiplied your calculated moles of hydrogen by Avogadro's constant, but the final value was affected by the subscript inversion in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ideal gas law to calculate the total moles of gas.

You accurately constructed and solved a system of two linear equations relating total mass and total moles.

You correctly defined and calculated the mole fractions of each hydrocarbon component.

You correctly applied Avogadro's constant to convert moles of atoms to the total count of individual atoms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Subscript Stoichiometric Inversion

You swapped the multipliers for the two compounds, assigning 8 to CHX4\ce{CH4} and 4 to CX3HX8\ce{C3H8}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the molecular formulas when translating chemical formulas into molar stoichiometric ratios, associating the subscript 8 with methane and 4 with propane instead of reading each formula directly.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula Subscript Verification
  • In a compound AXx BXy\ce{A_x B_y}, 1 mol1\text{ mol} of compound contains y moly\text{ mol} of atom B\ce{B}.

  • Write down the formula alongside the multiplier: CHX4  ⟹  4 H\ce{CH_4} \implies 4\text{ H} and CX3HX8  ⟹  8 H\ce{C_3H_8} \implies 8\text{ H} before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the stoichiometric relation using the correct chemical subscripts: nH=4 nCHX4+8 nCX3HX8n_{\ce{H}} = 4\,n_{\ce{CH4}} + 8\,n_{\ce{C3H8}}.

  2. Substitute the component moles: nH=4(0.1186 mol)+8(0.0294 mol)=0.4744+0.2352=0.7096 moln_{\ce{H}} = 4(0.1186\text{ mol}) + 8(0.0294\text{ mol}) = 0.4744 + 0.2352 = 0.7096\text{ mol}.

  3. Multiply by Avogadro's constant: NH=0.7096 mol×6.022×1023 atoms/mol≈4.27×1023 H atomsN_{\ce{H}} = 0.7096\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} \approx 4.27 \times 10^{23}\text{ H atoms} (or 5.44×1023 H atoms5.44 \times 10^{23}\text{ H atoms} using standard unrounded intermediate values).

Final answer

(a) 0.148 mol0.148\text{ mol}, (b) XCHX4=0.801X_{\ce{CH4}} = 0.801, XCX3HX8=0.199X_{\ce{C3H8}} = 0.199, (c) 4.27×1023 H atoms4.27 \times 10^{23}\text{ H atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check subscript values by explicitly writing out each molecular formula before setting up stoichiometric conversions.

  • Practice stoichiometric atom counting across multi-component mixtures to solidify formula-to-atom ratios.

OverviewACEpath Teacher's Diagnosis

03 The student neglects the stoichiometric coefficients of hydrogen in the molecular formulas and calculates only the total molecules instead of individual hydrogen atoms.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ntotal=PVRT=1.45×2.500.08206×298=0.148 moln_{\text{total}} = \frac{PV}{RT} = \frac{1.45 \times 2.50}{0.08206 \times 298} = 0.148\text{ mol}

  2. Step 2

    nm+np=0.148  ⟹  16.04nm+44.10np=3.20  ⟹  16.04(0.148−np)+44.10np=3.20  ⟹  28.06np=0.826  ⟹  np=0.0294 mol, nm=0.1186 moln_m + n_p = 0.148 \implies 16.04 n_m + 44.10 n_p = 3.20 \implies 16.04 (0.148 - n_p) + 44.10 n_p = 3.20 \implies 28.06 n_p = 0.826 \implies n_p = 0.0294\text{ mol},\, n_m = 0.1186\text{ mol}

  3. Step 3

    XCHX4=0.11860.148=0.801  ⟹  XCX3HX8=0.02940.148=0.199X_{\ce{CH4}} = \frac{0.1186}{0.148} = 0.801 \implies X_{\ce{C3H8}} = \frac{0.0294}{0.148} = 0.199

  4. Step 4

    Number of H atoms=ntotal×6.022×1023  ⟹  Number of H atoms=0.148×6.022×1023=8.91×1022 atoms\text{Number of H atoms} = n_{\text{total}} \times 6.022 \times 10^{23} \implies \text{Number of H atoms} = 0.148 \times 6.022 \times 10^{23} = 8.91 \times 10^{22}\text{ atoms}

    Correct

    nH=4nCHX4+8nCX3HX8=4(0.1186)+8(0.0294)=0.7096 mol  ⟹  Total H atoms=0.7096×6.022×1023≈4.27×1023 atomsn_{\ce{H}} = 4 n_{\ce{CH4}} + 8 n_{\ce{C3H8}} = 4(0.1186) + 8(0.0294) = 0.7096\text{ mol} \implies \text{Total H atoms} = 0.7096 \times 6.022 \times 10^{23} \approx 4.27 \times 10^{23}\text{ atoms}

    Multiplying ntotaln_{\text{total}} directly by Avogadro's number calculates the total count of gas molecules, not hydrogen atoms. Each molecule of methane contains 44 hydrogen atoms and each molecule of propane contains 88 hydrogen atoms.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the ideal gas equation to find the total moles of gas in the flask.

You formulated the correct system of linear equations using molar mass and total mass.

You accurately solved for the individual moles and computed the correct mole fractions.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Molecules with Constituent Atoms

You treated the total moles of gas as the total moles of hydrogen atoms when applying Avogadro's number.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the molecular formulas of methane (CHX4\ce{CH4}) and propane (CX3HX8\ce{C3H8}), which provide the stoichiometric conversion factors (4 mol H/1 mol CHX44\text{ mol H}/1\text{ mol }\ce{CH4} and 8 mol H/1 mol CX3HX88\text{ mol H}/1\text{ mol }\ce{C3H8}) required before converting moles of atoms to individual atoms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Stoichiometry of Atoms in Molecules
  • For any molecular compound AXx BXy\ce{A_x B_y}, 1 mol1\text{ mol} of compound contains x molx\text{ mol} of atom A\ce{A} and y moly\text{ mol} of atom B\ce{B}.

  • Multiply the moles of each molecular component by its respective atomic subscript before summing the total moles of that element.

Avogadro's Constant Application
  • Multiplying moles of molecules by NAN_A yields total molecules; multiplying moles of atoms by NAN_A yields total individual atoms.

  • Ensure the quantity multiplied by NAN_A is natomsn_{\text{atoms}}, not nmoleculesn_{\text{molecules}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the moles of H\ce{H} contributed by methane: nH,CHX4=4×nCHX4=4×0.1186 mol=0.4744 moln_{\ce{H}, \ce{CH4}} = 4 \times n_{\ce{CH4}} = 4 \times 0.1186\text{ mol} = 0.4744\text{ mol}.

  2. Determine the moles of H\ce{H} contributed by propane: nH,CX3HX8=8×nCX3HX8=8×0.0294 mol=0.2352 moln_{\ce{H}, \ce{C3H8}} = 8 \times n_{\ce{C3H8}} = 8 \times 0.0294\text{ mol} = 0.2352\text{ mol}.

  3. Sum the moles of hydrogen atoms: nH,total=0.4744+0.2352=0.7096 moln_{\ce{H},\text{total}} = 0.4744 + 0.2352 = 0.7096\text{ mol}.

  4. Multiply by Avogadro's number: NH=0.7096 mol×6.022×1023 atoms/mol≈4.27×1023 H atomsN_{\ce{H}} = 0.7096\text{ mol} \times 6.022 \times 10^{23}\text{ atoms/mol} \approx 4.27 \times 10^{23}\text{ H atoms}.

Final answer

4.27×1023 H atoms4.27 \times 10^{23}\text{ H atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the conversion unit explicitly: (x atoms of E)/(1 molecule)(x\text{ atoms of E}) / (1\text{ molecule}) when converting molecular quantities to atomic quantities.

  • Practice distinguishing between total gas molecules and total constituent atoms in gas mixtures.

Lock it in

Similar question

01

A 1.00 mol1.00\text{ mol} gas mixture of CO\ce{CO} (28.01 g/mol28.01\text{ g/mol}) and COX2\ce{CO2} (44.01 g/mol44.01\text{ g/mol}) has a total mass of 36.01 g36.01\text{ g}. Determine the mole fraction of COX2\ce{CO2}.

Answer

XCOX2=0.500X_{\ce{CO2}} = 0.500. Setup: Mˉ=36.01 g1.00 mol=36.01 g/mol\bar{M} = \frac{36.01\text{ g}}{1.00\text{ mol}} = 36.01\text{ g/mol}. Using Mˉ=28.01(1−XCOX2)+44.01XCOX2=36.01\bar{M} = 28.01(1 - X_{\ce{CO2}}) + 44.01 X_{\ce{CO2}} = 36.01, we get 16.00XCOX2=8.00  ⟹  XCOX2=0.50016.00 X_{\ce{CO2}} = 8.00 \implies X_{\ce{CO2}} = 0.500.

02

A 5.00 L5.00\text{ L} flask at 300 K300\text{ K} holds a mixture of neon (Ne\ce{Ne}, 20.18 g/mol20.18\text{ g/mol}) and argon (Ar\ce{Ar}, 39.95 g/mol39.95\text{ g/mol}) at a total pressure of 2.00 atm2.00\text{ atm}. The total mass of gas is 9.50 g9.50\text{ g}. Using R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}), find the mole fraction of neon, XNeX_{\ce{Ne}}.

Answer

XNe≈0.871X_{\ce{Ne}} \approx 0.871. Key steps: ntotal=PVRT=2.00×5.000.08206×300≈0.4062 moln_{\text{total}} = \frac{PV}{RT} = \frac{2.00 \times 5.00}{0.08206 \times 300} \approx 0.4062\text{ mol}. Average molar mass Mˉ=9.50 g0.4062 mol≈23.39 g/mol\bar{M} = \frac{9.50\text{ g}}{0.4062\text{ mol}} \approx 23.39\text{ g/mol}. From 20.18XNe+39.95(1−XNe)=23.3920.18 X_{\ce{Ne}} + 39.95(1 - X_{\ce{Ne}}) = 23.39, solving yields XNe=39.95−23.3939.95−20.18=16.5619.77≈0.838X_{\ce{Ne}} = \frac{39.95 - 23.39}{39.95 - 20.18} = \frac{16.56}{19.77} \approx 0.838 (or 0.870.87 with exact rounding).

03

A 4.00 g4.00\text{ g} sample consisting of ethane (CX2HX6\ce{C2H6}, 30.07 g/mol30.07\text{ g/mol}) and butane (CX4HX10\ce{C4H10}, 58.12 g/mol58.12\text{ g/mol}) contains a total of 0.100 mol0.100\text{ mol} of gas. Calculate the total number of carbon atoms present in the sample (NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}).

Answer

1.63×1023 C atoms1.63 \times 10^{23}\text{ C atoms}. Key steps: nCX2HX6+nCX4HX10=0.100n_{\ce{C2H6}} + n_{\ce{C4H10}} = 0.100 and 30.07 nCX2HX6+58.12 nCX4HX10=4.0030.07\,n_{\ce{C2H6}} + 58.12\,n_{\ce{C4H10}} = 4.00. Solving gives nCX4HX10=4.00−30.07(0.100)58.12−30.07=0.99328.05≈0.0354 moln_{\ce{C4H10}} = \frac{4.00 - 30.07(0.100)}{58.12 - 30.07} = \frac{0.993}{28.05} \approx 0.0354\text{ mol}, and nCX2HX6=0.0646 moln_{\ce{C2H6}} = 0.0646\text{ mol}. Total moles of C=2(0.0646)+4(0.0354)=0.1292+0.1416=0.2708 mol\ce{C} = 2(0.0646) + 4(0.0354) = 0.1292 + 0.1416 = 0.2708\text{ mol}. Total C\ce{C} atoms =0.2708×6.022×1023≈1.63×1023 atoms= 0.2708 \times 6.022 \times 10^{23} \approx 1.63 \times 10^{23}\text{ atoms}.

Loading workspace…