Resources
Consider the homologous series of unbranched, open-chain alkanes (), alkenes with one double bond (), and alkynes with one triple bond (). (a) Write mathematical expressions for the hydrogen-to-carbon atom ratio, , for each class as a function of carbon number . (b) Evaluate the asymptotic limit for all three classes. (c) Explain why this mathematical limit prevents distinguishing extremely long-chain linear hydrocarbons solely by percent elemental carbon/hydrogen composition without molecular weight determination.
Answer and steps
Final answer
(a) , , ; (b) , , and ; (c) As , the relative contribution of end-group hydrogens ( or ) vanishes toward zero, causing the mass percentage of carbon in all three families to converge asymptotically to , making combustion analysis percentages indistinguishable within standard experimental error without knowing the molar mass.
Steps
Part (a): Formulating the Hydrogen-to-Carbon Ratio
The atomic ratio of hydrogen to carbon, , is defined as the number of hydrogen atoms divided by the number of carbon atoms in a given molecular formula:
- Alkanes ():
- Alkenes ():
- Alkynes ():
Part (b): Evaluating the Asymptotic Limits as
Taking the limit as the carbon chain length approaches infinity:
- For alkanes:
- For alkenes:
- For alkynes:
All three homologous series converge to the exact same limiting ratio of .
Part (c): Physical and Analytical Consequences for Elemental Analysis
Elemental combustion analysis determines the empirical mass percentages of carbon and hydrogen.
-
Convergence of Elemental Mass Percentage: The mass percent of carbon in any hydrocarbon with formula is given by:
Using standard atomic weights ( and ), as , for all three classes. Thus: Correspondingly, , identical to that of an infinite polyethene or repeating methylene chain .
-
Analytical Limitation: As the chain length becomes very large, the contribution of the "end groups" (the hydrogens in alkanes or the degree of unsaturation with hydrogens in alkynes) becomes negligible compared to the total mass of the repeating units. The differences in and among an alkane, an alkene, and an alkyne of large (e.g., ) shrink to less than , which is well within the typical experimental uncertainty margin of combustion analysis ().
Therefore, without an independent determination of the molecular weight (molar mass) to establish the true value of , elemental composition data alone cannot distinguish among very long-chain alkanes, alkenes, and alkynes.
Typical errors
01 The student inverts the ratio as carbon-to-hydrogen (C/H) instead of hydrogen-to-carbon (H/C), leading to an asymptotic limit of 1/2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You defined the ratio as carbon-to-hydrogen () instead of hydrogen-to-carbon () as specified in the prompt.
- Step 2Correct
Your limit evaluation is mathematically correct for your inverted expressions, but the resulting numerical value is rather than due to the initial setup error in part (a).
- Step 3
As approaches infinity, the atom ratio converges to for all classes, so they all approach the same mass percentage composition of approximately and . Because their elemental percentages become indistinguishable, combustion analysis alone cannot identify the specific hydrocarbon without knowing the molecular weight.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the asymptotic limits of rational functions as .
You correctly deduced the limiting mass percentages of carbon and hydrogen for an infinite repeating chain.
You clearly explained why identical mass percentages prevent distinguishing homologous hydrocarbons by combustion analysis alone.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou inverted the fraction specified in the prompt, writing the ratio as rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the explicit ordering in the definition given in the prompt led to inverting the numerator and denominator across all three formulas.
REASONING PATH
Your ACEpath teacher’s suggested approach- Variable Definition Check
The ratio 'A-to-B' always translates to , placing A in the numerator and B in the denominator.
Always re-read the exact mathematical definition provided in the prompt before writing the formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationState as defined by the problem.
Substitute the hydrogen count in the numerator and carbon count in the denominator: , , and .
Evaluate the limits as : .
(a) , , ; (b) for all three classes.
02 The student incorrectly drops the variable n in the denominator when taking the limit, concluding that the alkane ratio diverges to infinity and the alkyne ratio diverges to negative infinity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Alkanes: , Alkenes: , Alkynes:
- Step 2
Alkanes: , Alkenes: , Alkynes:
Correct, ,
You dropped the denominator when evaluating the limits of and . Splitting the fraction gives ; since , both limits evaluate to .
- Step 3
Because the limits do not converge to the same value, the elemental percentages should diverge rather than converge, which contradicts the premise that elemental composition cannot distinguish them.
CorrectAs , the relative contribution of end-group hydrogens ( or ) vanishes, so for all three series. Consequently, the mass percentage of carbon converges to and hydrogen to , making combustion analysis values indistinguishable within experimental error without independent molecular weight data.
Your physical reasoning in part (c) was directly affected by the incorrect divergent limits found in part (b). Because all three limits actually converge to , the empirical composition becomes identical to an infinite chain.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the general formulas for open-chain alkanes, alkenes, and alkynes.
You correctly set up the ratio for each homologous series in part (a).
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou discarded the variable in the denominator during the limit calculation and evaluated the limit of the numerator alone, rather than evaluating the rational expression as .
REASONING PATH
Your ACEpath teacher’s suggested approach- Evaluate rational limits by splitting terms
For a rational function , split the quotient into before evaluating the limit at infinity.
Rewrite as , then use to find the limit .
CORRECTED PATH
ACEpath Teacher's DemonstrationFor alkanes: .
For alkenes: .
For alkynes: .
Because all three series have , their empirical formula approaches . The mass percent of carbon converges to . At very large , differences between series fall below standard combustion analysis detection limits (), so elemental analysis alone cannot distinguish them.
(b) All three limits equal ; (c) Because for all three families, their elemental mass compositions converge asymptotically to the same value (, ), rendering them analytically indistinguishable without molar mass data.
03 The student confuses atomic molar ratio with mass percentage directly, asserting that a limit of 2 means the compounds are composed of twice as much hydrogen by mass as carbon.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Alkanes: ; Alkenes: ; Alkynes:
- Step 2
- Step 3
"The limit of 2 means that as n grows large, all three series converge to having 66.7% hydrogen and 33.3% carbon by mass because there are 2 H atoms per C atom."
Correct,
You treated the atomic ratio as an atom count fraction ( by moles) and labeled it as mass percentage. Because carbon () is much heavier than hydrogen (), a atom ratio corresponds to approximately carbon and hydrogen by mass.
- Step 4
"Because every long-chain hydrocarbon approaches this same 66.7% H and 33.3% C elemental composition, elemental analysis cannot distinguish them without molecular weight."
CorrectBecause the mass percentage of carbon asymptotically approaches for all three series, the differences between them fall within experimental uncertainty, requiring molecular weight determination to identify the chain length .
Your conceptual conclusion is correct in explaining that identical limiting compositions prevent differentiation without molecular weight, but it relies on your incorrectly calculated mass percentages from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly formulated the hydrogen-to-carbon atom ratios for alkanes, alkenes, and alkynes.
You evaluated the limits as accurately for all three classes.
You understood the core analytical concept that convergence to identical elemental compositions prevents combustion analysis from distinguishing the compounds.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou interpreted an atomic ratio of directly as mass percentages of and , neglecting the molar masses of carbon () and hydrogen () in the mass percent formula.
REASONING PATH
Your ACEpath teacher’s suggested approach- Convert Atomic Ratio to Mass Percent
Multiply atom numbers or molar ratios by their respective atomic weights before computing mass fractions.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the formula for mass percent of carbon using the empirical repeating unit (since ): .
Substitute standard molar masses (, ): .
Find the hydrogen percentage: .
State that because the elemental percentages of all three classes converge to and , standard combustion analysis (typical error ) cannot distinguish long-chain alkanes, alkenes, and alkynes without measuring molar mass.
As , all three series approach the composition of a repeating unit, giving and by mass. Because these elemental percentages become indistinguishable within experimental error, molecular weight determination is required to distinguish them.
Lock it in
How do you translate an 'X-to-Y ratio' into a mathematical fraction?
. The first quantity () is always the numerator, and the second () is the denominator.
Similar question
Write an expression for the hydrogen-to-carbon atom ratio for the homologous series of open-chain saturated monohydric alcohols with general formula , and evaluate .
Answer
; . The total number of hydrogen atoms is , and dividing by gives , which approaches as .
A series of linear alpha,omega-dicarboxylic acids has the formula . Express the oxygen-to-carbon ratio as a function of the methylene number , and calculate its asymptotic limit as .
Answer
; . Each molecule has oxygen atoms and carbon atoms. As the methylene chain grows infinitely long, the contribution of terminal carboxyl oxygen atoms approaches zero relative to the carbon chain.
A linear hydrocarbon is found by elemental combustion analysis to contain and by mass. If a separate mass spectrometry experiment determines its molecular mass to be approximately , deduce whether the compound is an alkane, an alkene, or an alkyne, and find its molecular formula. (Use atomic masses: , ).
Answer
Formula: (an alkane). For : Alkane molar mass , matching the observed mass of (whereas is and is , or testing via ).