Resources

A student analyzes an energy coordinate diagram for the reaction 2 NO2(g)→2 NO(g)+O2(g)2\,\text{NO}_2(g) \rightarrow 2\,\text{NO}(g) + \text{O}_2(g). The reactant plateau is at 150.0 kJ/mol150.0\text{ kJ/mol}, the transition state peak is at 265.0 kJ/mol265.0\text{ kJ/mol}, and the product plateau is at 264.0 kJ/mol264.0\text{ kJ/mol}. A student inadvertently calculates the enthalpy change using ΔH=Ereactants−Eproducts\Delta H = E_{\text{reactants}} - E_{\text{products}} and assigns the sign of activation energy based on an inverted coordinate convention. State the correct thermodynamic sign and value of ΔHrxn\Delta H_{\text{rxn}}, calculate the correct value for Ea, forwardE_{\text{a, forward}}, and explain the explicit physical meaning of a positive versus negative sign for both ΔHrxn\Delta H_{\text{rxn}} and activation energy.

Answer and steps

Final answer

ΔHrxn=+114.0 kJ/mol\Delta H_{\text{rxn}} = +114.0\text{ kJ/mol} (endothermic, heat absorbed); Ea, forward=+115.0 kJ/molE_{\text{a, forward}} = +115.0\text{ kJ/mol}; ΔHrxn\Delta H_{\text{rxn}} is defined strictly as Eproducts−EreactantsE_{\text{products}} - E_{\text{reactants}} (positive for endothermic, negative for exothermic), whereas activation energy EaE_{\text{a}} represents a physical kinetic potential barrier and is fundamentally defined as a non-negative quantity (Ea≥0 kJ/molE_{\text{a}} \ge 0\text{ kJ/mol}).

Steps

01

Identify Given Energy Levels

From the reaction energy profile:

  • Reactants (2 NOX2(g)\ce{2NO2(g)}): Ereactants=150.0 kJ/molE_{\text{reactants}} = 150.0\text{ kJ/mol}
  • Transition state (peak): ETS=265.0 kJ/molE_{\text{TS}} = 265.0\text{ kJ/mol}
  • Products (2 NO(g)+OX2(g)\ce{2NO(g) + O2(g)}): Eproducts=264.0 kJ/molE_{\text{products}} = 264.0\text{ kJ/mol}

02

Calculate the Enthalpy Change of the Reaction (ΔHrxn\Delta H_{\text{rxn}})

Enthalpy is a state function representing the net change in energy between the final state (products) and the initial state (reactants):

ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}

ΔHrxn=264.0 kJ/mol−150.0 kJ/mol=+114.0 kJ/mol\Delta H_{\text{rxn}} = 264.0\text{ kJ/mol} - 150.0\text{ kJ/mol} = +114.0\text{ kJ/mol}

Common Pitfall: Subtracting products from reactants (Ereactants−EproductsE_{\text{reactants}} - E_{\text{products}}) reverses the thermodynamic sign convention, incorrectly suggesting an exothermic process instead of an endothermic one.


03

Calculate the Forward Activation Energy (Ea, forwardE_{\text{a, forward}})

The activation energy for the forward reaction is the energy required to reach the transition state from the reactant level:

Ea, forward=ETS−EreactantsE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}}

Ea, forward=265.0 kJ/mol−150.0 kJ/mol=+115.0 kJ/molE_{\text{a, forward}} = 265.0\text{ kJ/mol} - 150.0\text{ kJ/mol} = +115.0\text{ kJ/mol}


04

Physical Meaning of the Signs

  • Enthalpy Change (ΔHrxn\Delta H_{\text{rxn}}):

    • ΔHrxn>0\Delta H_{\text{rxn}} > 0 (positive): The reaction is endothermic. The products possess higher potential energy than the reactants, meaning net heat is absorbed by the system from the surroundings.
    • ΔHrxn<0\Delta H_{\text{rxn}} < 0 (negative): The reaction is exothermic. The products have lower potential energy than the reactants, releasing net heat into the surroundings.
  • Activation Energy (EaE_{\text{a}}):

    • EaE_{\text{a}} represents the physical kinetic energy barrier colliding reactant molecules must overcome to reach the transition state and form products.
    • Because it measures the difference between an energy maximum (the transition state peak) and the reactant ground level, it is fundamentally defined as a non-negative quantity (Ea≥0 kJ/molE_{\text{a}} \ge 0\text{ kJ/mol}). A negative value has no physical meaning in elementary chemical kinetics because an energy barrier always requires an energetic input.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates reaction enthalpy by subtracting products from reactants, reversing the thermodynamic sign to negative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHrxn=Ereactants−Eproducts  ⟹  ΔHrxn=150.0 kJ/mol−264.0 kJ/mol  ⟹  ΔHrxn=−114.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{reactants}} - E_{\text{products}} \implies \Delta H_{\text{rxn}} = 150.0\text{ kJ/mol} - 264.0\text{ kJ/mol} \implies \Delta H_{\text{rxn}} = -114.0\text{ kJ/mol}

    Correct

    ΔHrxn=Eproducts−Ereactants=264.0 kJ/mol−150.0 kJ/mol=+114.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}} = 264.0\text{ kJ/mol} - 150.0\text{ kJ/mol} = +114.0\text{ kJ/mol}

    You calculated ΔHrxn\Delta H_{\text{rxn}} by subtracting products from reactants. Because enthalpy is a state function defined as final state minus initial state, the correct formula is ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}, yielding +114.0 kJ/mol+114.0\text{ kJ/mol}.

  2. Step 2

    Ea, forward=Etransition_state−Ereactants  ⟹  Ea, forward=265.0 kJ/mol−150.0 kJ/mol  ⟹  Ea, forward=+115.0 kJ/molE_{\text{a, forward}} = E_{\text{transition\_state}} - E_{\text{reactants}} \implies E_{\text{a, forward}} = 265.0\text{ kJ/mol} - 150.0\text{ kJ/mol} \implies E_{\text{a, forward}} = +115.0\text{ kJ/mol}

  3. Step 3

    A positive ΔH\Delta H indicates an endothermic process absorbing heat, while negative ΔH\Delta H indicates an exothermic process releasing heat. Activation energy is the kinetic energy threshold required to reach the transition state, which is strictly positive.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the transition state and reactant energy values to calculate the forward activation energy.

You clearly articulated that a positive enthalpy indicates an endothermic process and a negative enthalpy indicates an exothermic process.

You correctly recognized that activation energy represents an energy barrier and must be positive.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed Enthalpy Subtraction

You repeated the inverted formula mentioned in the prompt (Ereactants−EproductsE_{\text{reactants}} - E_{\text{products}}) rather than correcting it to the standard final-minus-initial thermodynamic convention.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing thermodynamic state function changes (ΔX=Xfinal−Xinitial\Delta X = X_{\text{final}} - X_{\text{initial}}) with bond energy calculations (where ΔH≈∑Bonds Broken−∑Bonds Formed\Delta H \approx \sum \text{Bonds Broken} - \sum \text{Bonds Formed}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic State Change Convention
  • For any change in a thermodynamic state function, Δ=final state−initial state\Delta = \text{final state} - \text{initial state}.

  • Always compute ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}} when reading potential energy diagrams.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the standard state-function definition: ΔHrxn=Eproducts−Ereactants\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}}.

  2. Substitute the given plateau values: ΔHrxn=264.0 kJ/mol−150.0 kJ/mol\Delta H_{\text{rxn}} = 264.0\text{ kJ/mol} - 150.0\text{ kJ/mol}.

  3. Calculate the final value with the correct sign: ΔHrxn=+114.0 kJ/mol\Delta H_{\text{rxn}} = +114.0\text{ kJ/mol}.

Final answer

ΔHrxn=+114.0 kJ/mol\Delta H_{\text{rxn}} = +114.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the universal definition of Δ\Delta: always subtract the initial state from the final state.

  • Practice distinguishing between finding ΔH\Delta H from an energy diagram (Eproducts−EreactantsE_{\text{products}} - E_{\text{reactants}}) versus from average bond enthalpies (∑Dbroken−∑Dformed\sum D_{\text{broken}} - \sum D_{\text{formed}}).

  • Verify reaction diagram endothermicity visually: if products lie higher than reactants, ΔH\Delta H must be positive.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the product energy instead of reactant energy to find the forward activation energy, confusing forward activation energy with the reverse activation energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHrxn=Eproducts−Ereactants=264.0 kJ/mol−150.0 kJ/mol=+114.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}} = 264.0\text{ kJ/mol} - 150.0\text{ kJ/mol} = +114.0\text{ kJ/mol}

  2. Step 2

    Ea, forward=Etransition_state−Eproducts=265.0 kJ/mol−264.0 kJ/mol=+1.0 kJ/molE_{\text{a, forward}} = E_{\text{transition\_state}} - E_{\text{products}} = 265.0\text{ kJ/mol} - 264.0\text{ kJ/mol} = +1.0\text{ kJ/mol}

    Correct

    Ea, forward=ETS−Ereactants=265.0 kJ/mol−150.0 kJ/mol=+115.0 kJ/molE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}} = 265.0\text{ kJ/mol} - 150.0\text{ kJ/mol} = +115.0\text{ kJ/mol}

    You subtracted the product plateau energy (264.0 kJ/mol264.0\text{ kJ/mol}) instead of the reactant baseline energy (150.0 kJ/mol150.0\text{ kJ/mol}). Measuring from products to the transition state peak yields the reverse activation energy, Ea, reverseE_{\text{a, reverse}}, rather than the forward activation energy.

  3. Step 3

    "A positive ΔH\Delta H indicates an endothermic process absorbing heat, while negative ΔH\Delta H indicates an exothermic process releasing heat. Activation energy represents the energy barrier that reactants must absorb to form the activated complex, meaning it is positive."

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct thermodynamic formula to calculate the reaction enthalpy change as +114.0 kJ/mol+114.0\text{ kJ/mol}.

You clearly explained the physical distinction between endothermic (positive ΔH\Delta H) and exothermic (negative ΔH\Delta H) reactions.

You correctly articulated why activation energy represents a positive potential energy barrier.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
confusing forward and reverse activation energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the baseline reference state for the forward reaction with that of the reverse reaction, subtracting product energy rather than reactant energy from the transition state peak.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Baselines for Forward vs. Reverse Activation Energy
  • For a forward reaction, Ea, forward=ETS−EreactantsE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}}. For a reverse reaction, Ea, reverse=ETS−EproductsE_{\text{a, reverse}} = E_{\text{TS}} - E_{\text{products}}.

  • Always identify the starting species of the reaction direction of interest and measure the energy gap from that specific plateau up to the transition state peak.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the reactant plateau: Ereactants=150.0 kJ/molE_{\text{reactants}} = 150.0\text{ kJ/mol}.

  2. Identify the transition state peak: ETS=265.0 kJ/molE_{\text{TS}} = 265.0\text{ kJ/mol}.

  3. Compute the forward activation energy: Ea, forward=ETS−Ereactants=265.0 kJ/mol−150.0 kJ/mol=+115.0 kJ/molE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}} = 265.0\text{ kJ/mol} - 150.0\text{ kJ/mol} = +115.0\text{ kJ/mol}.

Final answer

Ea, forward=+115.0 kJ/molE_{\text{a, forward}} = +115.0\text{ kJ/mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice labeling both Ea, forwardE_{\text{a, forward}} and Ea, reverseE_{\text{a, reverse}} with vertical arrows on reaction progress diagrams before plugging values into equations.

  • Verify your activation energy values with the identity ΔHrxn=Ea, forward−Ea, reverse\Delta H_{\text{rxn}} = E_{\text{a, forward}} - E_{\text{a, reverse}}.

OverviewACEpath Teacher's Diagnosis

03 The student believes that since the forward reaction is endothermic, the activation energy must take a negative sign if energy is released in any step.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔHrxn=Eproducts−Ereactants  ⟹  ΔHrxn=264.0 kJ/mol−150.0 kJ/mol  ⟹  ΔHrxn=+114.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}} \implies \Delta H_{\text{rxn}} = 264.0\text{ kJ/mol} - 150.0\text{ kJ/mol} \implies \Delta H_{\text{rxn}} = +114.0\text{ kJ/mol}

  2. Step 2

    Ea, forward=Etransition_state−Ereactants  ⟹  Ea, forward=265.0 kJ/mol−150.0 kJ/mol  ⟹  Ea, forward=+115.0 kJ/molE_{\text{a, forward}} = E_{\text{transition\_state}} - E_{\text{reactants}} \implies E_{\text{a, forward}} = 265.0\text{ kJ/mol} - 150.0\text{ kJ/mol} \implies E_{\text{a, forward}} = +115.0\text{ kJ/mol}

  3. Step 3

    A positive ΔH\Delta H means heat is destroyed and a negative ΔH\Delta H means heat is released.

    Correct

    A positive ΔH\Delta H denotes an endothermic reaction where net heat is absorbed by the system from the surroundings; a negative ΔH\Delta H denotes an exothermic reaction where net heat is released to the surroundings.

    You correctly noted that negative ΔH\Delta H means heat is released, but crossing out your phrase left the meaning of positive ΔH\Delta H unstated; energy cannot be destroyed, and positive ΔH\Delta H specifically indicates net heat absorbed from the surroundings.

  4. Step 4

    A positive activation energy means an energy barrier exists, whereas a negative activation energy means the reaction proceeds faster at lower temperatures without an obstacle.

    Correct

    Activation energy EaE_{\text{a}} measures the energy difference between a maximum (the transition state) and the reactant ground state, making it fundamentally a non-negative barrier (Ea≥0 kJ/molE_{\text{a}} \ge 0\text{ kJ/mol}). A negative activation energy has no physical meaning on an elementary reaction energy profile.

    On an elementary reaction coordinate profile, activation energy is defined from reactant ground state up to the transition state peak, so it must always be greater than or equal to zero.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition ΔH=Eproducts−Ereactants\Delta H = E_{\text{products}} - E_{\text{reactants}} to find +114.0 kJ/mol+114.0\text{ kJ/mol}.

You correctly calculated Ea, forward=ETS−Ereactants=+115.0 kJ/molE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}} = +115.0\text{ kJ/mol}.

You recognized that a negative ΔH\Delta H corresponds to heat being released.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention and physical definition of activation energy

You scratched out your statement for positive ΔH\Delta H without replacing it with the correct term, 'heat is absorbed'.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated activation energy as a bidirectional signed thermodynamic quantity like ΔH\Delta H, rather than as a geometric height on a potential energy surface where ETS≥EreactantsE_{\text{TS}} \ge E_{\text{reactants}} requires Ea≥0E_{\text{a}} \ge 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Sign of Enthalpy
  • ΔH=Hfinal−Hinitial\Delta H = H_{\text{final}} - H_{\text{initial}}. ΔH>0\Delta H > 0 means heat is absorbed (endothermic); ΔH<0\Delta H < 0 means heat is released (exothermic).

  • Always interpret ΔH\Delta H through the lens of energy conservation: energy transfers between system and surroundings, it is never created or destroyed.

Kinetic Barrier Non-Negativity
  • Ea=ETS−EreactantsE_{\text{a}} = E_{\text{TS}} - E_{\text{reactants}}. Because the transition state is an energy peak, ETS≥EreactantsE_{\text{TS}} \ge E_{\text{reactants}}, so Ea≥0E_{\text{a}} \ge 0.

  • Do not assign a negative sign to activation energy on an elementary energy profile; if there is no barrier, Ea=0E_{\text{a}} = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the meaning of ΔH\Delta H: ΔH>0\Delta H > 0 means the system absorbs net heat from the surroundings (endothermic), while ΔH<0\Delta H < 0 means the system releases net heat to the surroundings (exothermic).

  2. State the physical meaning of EaE_{\text{a}}: EaE_{\text{a}} is the minimum kinetic energy required by reactants to reach the transition state. Because it represents a peak relative to reactants, it is defined strictly as Ea≥0 kJ/molE_{\text{a}} \ge 0\text{ kJ/mol}, with no physical meaning for a negative value on an elementary reaction profile.

Final answer

ΔHrxn=+114.0 kJ/mol\Delta H_{\text{rxn}} = +114.0\text{ kJ/mol} (endothermic, heat absorbed); Ea, forward=+115.0 kJ/molE_{\text{a, forward}} = +115.0\text{ kJ/mol}; ΔHrxn\Delta H_{\text{rxn}} can be positive (endothermic) or negative (exothermic), whereas EaE_{\text{a}} represents a physical kinetic barrier and is strictly non-negative (Ea≥0 kJ/molE_{\text{a}} \ge 0\text{ kJ/mol}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the first law of thermodynamics to describe enthalpy changes as heat absorbed or released rather than created or destroyed.

  • Remember that activation energy is an obstacle height measured upward from the reactants, meaning it can never be negative in an elementary step.

Lock it in

Similar question

01

A reaction coordinate profile shows reactants at 220.0 kJ/mol220.0\text{ kJ/mol}, the transition state peak at 310.0 kJ/mol310.0\text{ kJ/mol}, and products at 95.0 kJ/mol95.0\text{ kJ/mol}. Calculate ΔHrxn\Delta H_{\text{rxn}} and Ea, forwardE_{\text{a, forward}}, including their signs.

Answer

ΔHrxn=Eproducts−Ereactants=95.0−220.0=−125.0 kJ/mol\Delta H_{\text{rxn}} = E_{\text{products}} - E_{\text{reactants}} = 95.0 - 220.0 = -125.0\text{ kJ/mol} (exothermic). Ea, forward=ETS−Ereactants=310.0−220.0=+90.0 kJ/molE_{\text{a, forward}} = E_{\text{TS}} - E_{\text{reactants}} = 310.0 - 220.0 = +90.0\text{ kJ/mol}.

02

For the reversible reaction A+B⇌C+D\ce{A + B <=> C + D}, the forward activation energy is Ea, forward=+85.0 kJ/molE_{\text{a, forward}} = +85.0\text{ kJ/mol} and the enthalpy of reaction is ΔHrxn=+35.0 kJ/mol\Delta H_{\text{rxn}} = +35.0\text{ kJ/mol}. Calculate the activation energy for the reverse reaction, Ea, reverseE_{\text{a, reverse}}.

Answer

Ea, reverse=Ea, forward−ΔHrxn=85.0 kJ/mol−35.0 kJ/mol=+50.0 kJ/molE_{\text{a, reverse}} = E_{\text{a, forward}} - \Delta H_{\text{rxn}} = 85.0\text{ kJ/mol} - 35.0\text{ kJ/mol} = +50.0\text{ kJ/mol}. Both activation energies must be positive.

03

A catalytic mechanism lowers the transition state peak of an endothermic reaction from 400.0 kJ/mol400.0\text{ kJ/mol} to 320.0 kJ/mol320.0\text{ kJ/mol}. The reactants start at 100.0 kJ/mol100.0\text{ kJ/mol} and the products end at 250.0 kJ/mol250.0\text{ kJ/mol}. Determine the change in Ea, forwardE_{\text{a, forward}} and the change in ΔHrxn\Delta H_{\text{rxn}} caused by the catalyst.

Answer

Uncatalyzed Ea=400.0−100.0=+300.0 kJ/molE_{\text{a}} = 400.0 - 100.0 = +300.0\text{ kJ/mol}; catalyzed Ea=320.0−100.0=+220.0 kJ/molE_{\text{a}} = 320.0 - 100.0 = +220.0\text{ kJ/mol} (a decrease of 80.0 kJ/mol80.0\text{ kJ/mol}). ΔHrxn=250.0−100.0=+150.0 kJ/mol\Delta H_{\text{rxn}} = 250.0 - 100.0 = +150.0\text{ kJ/mol} in both cases, so the change in ΔHrxn\Delta H_{\text{rxn}} is 0 kJ/mol0\text{ kJ/mol} (catalysts do not alter reaction thermodynamics).

Loading workspace…