Resources

Unlike nuclear fission which can be initiated at room temperature by uncharged thermal neutrons (Ek≈0.025 eVE_k \approx 0.025\,\text{eV}), nuclear fusion requires overcoming a critical Coulomb barrier. Consider two deuterium nuclei (12H^{2}_{1}\text{H}, charge q=+e=1.602×10−19 Cq = +e = 1.602 \times 10^{-19}\,\text{C}) approaching each other head-on. (a) Assuming the strong nuclear force initiates fusion when the center-to-center separation distance reaches a threshold of r=3.50×10−15 mr = 3.50 \times 10^{-15}\,\text{m}, calculate the classical Coulomb potential energy barrier in kiloelectron-volts (keV\text{keV}), given ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\,\text{N}\cdot\text{m}^2/\text{C}^2. (b) State the fundamental reason why thermal neutron-induced fission does not possess this electrostatic barrier threshold.

Answer and steps

Final answer

(a) Vc=411 keVV_c = 411\,\text{keV}; (b) The neutron is an electrically neutral particle (q=0q = 0), experiencing zero repulsive Coulomb force as it approaches the target nucleus.

Steps

Part (a): Calculating the Coulomb Potential Energy Barrier

  1. Identify the governing relationship: The electrostatic (Coulomb) potential energy VcV_c between two point charges q1q_1 and q2q_2 separated by a center-to-center distance rr is given by Coulomb's law: Vc=keq1q2rV_c = \frac{k_e q_1 q_2}{r}
  2. Substitute the given values: Both deuterium nuclei possess an elementary charge q1=q2=+e=1.602×10−19 Cq_1 = q_2 = +e = 1.602 \times 10^{-19}\,\text{C}.

    • Coulomb constant: ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\,\text{N}\cdot\text{m}^2/\text{C}^2
    • Separation distance: r=3.50×10−15 mr = 3.50 \times 10^{-15}\,\text{m}

    Substituting these values gives: Vc=(8.988×109 N⋅m2/C2)(1.602×10−19 C)23.50×10−15 mV_c = \frac{(8.988 \times 10^9\,\text{N}\cdot\text{m}^2/\text{C}^2)(1.602 \times 10^{-19}\,\text{C})^2}{3.50 \times 10^{-15}\,\text{m}}

    Vc=2.307×10−28 J⋅m3.50×10−15 m≈6.591×10−14 JV_c = \frac{2.307 \times 10^{-28}\,\text{J}\cdot\text{m}}{3.50 \times 10^{-15}\,\text{m}} \approx 6.591 \times 10^{-14}\,\text{J}

  3. Convert Joules to kiloelectron-volts (keV\text{keV}): Recall that 1 eV=1.602×10−19 J1\,\text{eV} = 1.602 \times 10^{-19}\,\text{J}, which means dividing by ee directly converts the energy to electron-volts: Vc=6.591×10−14 J1.602×10−19 J/eV≈4.114×105 eVV_c = \frac{6.591 \times 10^{-14}\,\text{J}}{1.602 \times 10^{-19}\,\text{J/eV}} \approx 4.114 \times 10^5\,\text{eV}

    Expressing this in keV\text{keV} (1 keV=103 eV1\,\text{keV} = 10^3\,\text{eV}): Vc≈411 keVV_c \approx 411\,\text{keV}

Common Pitfall: Forgetting to convert potential energy from Joules (J\text{J}) to keV\text{keV}, or using the mass of deuterium instead of its charge. The Coulomb barrier depends strictly on electrostatic charge and separation distance.


Part (b): Why Neutron-Induced Fission Lacks this Barrier

  • Electrostatic Neutrality: A neutron is an electrically neutral subatomic particle (q=0q = 0).
  • Absence of Coulomb Repulsion: Because the electrostatic force between two charges is proportional to their product (Fe∝q1q2F_e \propto q_1 q_2), a neutron experiences zero electrostatic repulsive force as it approaches a positively charged target nucleus (q2=+Zeq_2 = +Ze).
  • Nuclear Capture: Without an electrostatic barrier to overcome, even thermal neutrons possessing very low kinetic energies (≈0.025 eV\approx 0.025\,\text{eV}) can readily enter the range of the strong nuclear force and initiate fission.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses electrostatic force with potential energy by squaring the separation distance in the denominator, resulting in an incorrect barrier value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Uc=ke⋅q2r2  ⟹  Uc=(8.988×109)(1.602×10−19)2(3.50×10−15)2=1.88×101 JU_c = k_e \cdot \frac{q^2}{r^2} \implies U_c = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{(3.50 \times 10^{-15})^2} = 1.88 \times 10^1\,\text{J}

    Correct

    Vc=keq2r=(8.988×109 N⋅m2/C2)(1.602×10−19 C)23.50×10−15 m≈6.591×10−14 JV_c = \frac{k_e q^2}{r} = \frac{(8.988 \times 10^9\,\text{N}\cdot\text{m}^2/\text{C}^2)(1.602 \times 10^{-19}\,\text{C})^2}{3.50 \times 10^{-15}\,\text{m}} \approx 6.591 \times 10^{-14}\,\text{J}

    You used r2r^2 in the denominator instead of rr. The expression keq1q2r2\frac{k_e q_1 q_2}{r^2} defines electrostatic force (in Newtons), whereas electric potential energy is given by Vc=keq1q2rV_c = \frac{k_e q_1 q_2}{r} (in Joules).

  2. Step 2

    Uc=1.88×10171.602×10−16=1.17×1017 keVU_c = \frac{1.88 \times 10^{17}}{1.602 \times 10^{-16}} = 1.17 \times 10^{17}\,\text{keV}

    Correct

    Vc=6.591×10−14 J1.602×10−16 J/keV≈411 keVV_c = \frac{6.591 \times 10^{-14}\,\text{J}}{1.602 \times 10^{-16}\,\text{J/keV}} \approx 411\,\text{keV}

    Because your energy in Joules came from the force formula and contained an exponent discrepancy, the resulting value in kiloelectron-volts is incorrect despite using the standard conversion factor 1.602×10−16 J/keV1.602 \times 10^{-16}\,\text{J/keV}.

  3. Step 3

    Neutrons have no net charge, so there is no electrostatic repulsion from the nucleus.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly explained in Part (b) that neutrons carry no electric charge and therefore experience no electrostatic repulsion.

You correctly identified the charges of the approaching deuterium nuclei as q=+e=1.602×10−19 Cq = +e = 1.602 \times 10^{-19}\,\text{C}.

You recognized that converting from Joules to keV\text{keV} requires dividing by the charge of an electron times 10310^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coulomb Force vs. Potential Energy Confusion

You squared the separation distance rr in the potential energy denominator, calculating electrostatic force instead of potential energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the inverse-square law for electrostatic force (F∝r−2F \propto r^{-2}) with the inverse-distance formula for electrostatic potential energy (U∝r−1U \propto r^{-1}). Potential energy is the line integral of force over distance, which eliminates one power of rr in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the power of separation distance
  • Electrostatic force has r2r^2 in the denominator; electrostatic potential energy has rr in the denominator (Vc=keq1q2rV_c = \frac{k_e q_1 q_2}{r}).

  • Always verify units: N⋅m2/C2×C2/m=N⋅m=J\text{N}\cdot\text{m}^2/\text{C}^2 \times \text{C}^2 / \text{m} = \text{N}\cdot\text{m} = \text{J}.

Direct conversion from Joules to electron-volts
  • Dividing Vc=kee2rV_c = \frac{k_e e^2}{r} by e=1.602×10−19 J/eVe = 1.602 \times 10^{-19}\,\text{J/eV} yields Vc=keerV_c = \frac{k_e e}{r} directly in eV\text{eV}.

  • Simplify algebraically before computing numbers to avoid exponent transcription slips.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the potential energy in Joules using Vc=keq2rV_c = \frac{k_e q^2}{r}: Vc=(8.988×109)(1.602×10−19)23.50×10−15≈6.591×10−14 JV_c = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{3.50 \times 10^{-15}} \approx 6.591 \times 10^{-14}\,\text{J}.

  2. Convert the barrier energy into electron-volts and kiloelectron-volts: 6.591×10−14 J1.602×10−19 J/eV≈4.114×105 eV=411 keV\frac{6.591 \times 10^{-14}\,\text{J}}{1.602 \times 10^{-19}\,\text{J/eV}} \approx 4.114 \times 10^5\,\text{eV} = 411\,\text{keV}.

Final answer

(a) Vc=411 keVV_c = 411\,\text{keV}; (b) Neutrons are electrically neutral (q=0q = 0), so they experience no electrostatic Coulomb repulsion.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between electrostatic force (Fe=keq1q2/r2F_e = k_e q_1 q_2 / r^2) and electrostatic potential energy (Ue=keq1q2/rU_e = k_e q_1 q_2 / r).

  • Perform dimensional analysis on intermediate expressions before entering numbers into your calculator.

  • Practice calculating Coulomb barrier thresholds for different light-ion fusion reactions, such as D-T\text{D-T} and p-11B\text{p-}^{11}\text{B}.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the mass number of deuterium with its atomic charge number, using a charge of +2e instead of +1e.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    q=2×(1.602×10−19 C)=3.204×10−19 Cq = 2 \times (1.602 \times 10^{-19}\,\text{C}) = 3.204 \times 10^{-19}\,\text{C}

    Correct

    q=+1e=1.602×10−19 Cq = +1e = 1.602 \times 10^{-19}\,\text{C}

    You multiplied the elementary charge by 22, confusing the mass number (A=2A = 2) of deuterium (12H^{2}_{1}\text{H}) with its proton number (Z=1Z = 1). A deuterium nucleus contains only one proton, so its net charge is +1e+1e.

  2. Step 2

    Uc=(8.988×109)×(3.204×10−19)23.50×10−15=2.64×10−13 JU_c = \frac{(8.988 \times 10^9) \times (3.204 \times 10^{-19})^2}{3.50 \times 10^{-15}} = 2.64 \times 10^{-13}\,\text{J}

    Correct

    Vc=(8.988×109 N⋅m2/C2)(1.602×10−19 C)23.50×10−15 m≈6.591×10−14 JV_c = \frac{(8.988 \times 10^9\,\text{N}\cdot\text{m}^2/\text{C}^2)(1.602 \times 10^{-19}\,\text{C})^2}{3.50 \times 10^{-15}\,\text{m}} \approx 6.591 \times 10^{-14}\,\text{J}

    Your application of Coulomb's potential energy formula was correct, but this step inherited your quadrupled charge-squared factor from Step 1.

  3. Step 3

    Uc=2.64×10−131.602×10−16=1646 keVU_c = \frac{2.64 \times 10^{-13}}{1.602 \times 10^{-16}} = 1646\,\text{keV}

    Correct

    Vc=6.591×10−14 J1.602×10−16 J/keV≈411 keVV_c = \frac{6.591 \times 10^{-14}\,\text{J}}{1.602 \times 10^{-16}\,\text{J/keV}} \approx 411\,\text{keV}

    Your unit conversion factor from Joules to kiloelectron-volts (1 keV=1.602×10−16 J1\,\text{keV} = 1.602 \times 10^{-16}\,\text{J}) was completely accurate, but the numerical result was four times too large due to the charge error in Step 1.

  4. Step 4

    Neutrons are neutral, so they feel no repulsive Coulomb force.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Coulomb's law as the governing formula for the potential energy barrier.

You carried out the algebraic substitution and unit conversion from Joules to keV\text{keV} accurately.

You clearly explained that neutrons experience zero repulsive Coulomb force due to electrical neutrality.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass Number vs. Atomic Number Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the mass number (A=2A = 2) rather than the atomic number (Z=1Z = 1) to calculate the charge of the deuterium nucleus (12H^{2}_{1}\text{H}). Because Coulomb potential energy depends solely on electric charge (q=Zeq = Ze), neutrons and total nucleons do not contribute to electrostatic repulsion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Nuclear Notation Check
  • In standard isotopic notation ZAX^{A}_{Z}\text{X}, AA represents total nucleons (mass number) while ZZ represents protons (charge number).

  • Always use q=+Zeq = +Ze when computing electrostatic forces and potential energies for nuclei.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the charge of each deuterium nucleus (12H^{2}_{1}\text{H}) using Z=1Z = 1: q=+1e=1.602×10−19 Cq = +1e = 1.602 \times 10^{-19}\,\text{C}.

  2. Calculate the potential energy: Vc=(8.988×109)(1.602×10−19)23.50×10−15≈6.591×10−14 JV_c = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{3.50 \times 10^{-15}} \approx 6.591 \times 10^{-14}\,\text{J}.

  3. Convert to keV\text{keV}: Vc=6.591×10−14 J1.602×10−16 J/keV≈411 keVV_c = \frac{6.591 \times 10^{-14}\,\text{J}}{1.602 \times 10^{-16}\,\text{J/keV}} \approx 411\,\text{keV}.

Final answer

(a) Vc=411 keVV_c = 411\,\text{keV}; (b) The neutron is an electrically neutral particle (q=0q = 0), experiencing zero repulsive Coulomb force as it approaches the target nucleus.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review isotopic notation ZAX^{A}_{Z}\text{X} to ensure you always use ZZ for electrostatic charge calculations.

  • Practice distinguishing nuclear mass quantities from nuclear charge quantities across fusion and alpha-decay problems.

OverviewACEpath Teacher's Diagnosis

03 The student attributes the lack of an electrostatic barrier in fission to the high kinetic energy of neutrons rather than their neutral electric charge.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Uc=keq2r  ⟹  Uc=(8.988×109)×(1.602×10−19)23.50×10−15=6.59×10−14 J  ⟹  Uc=6.59×10−14 J1.602×10−16 J/keV=411 keVU_c = k_e \frac{q^2}{r} \implies U_c = (8.988 \times 10^9) \times \frac{(1.602 \times 10^{-19})^2}{3.50 \times 10^{-15}} = 6.59 \times 10^{-14}\,\text{J} \implies U_c = \frac{6.59 \times 10^{-14}\,\text{J}}{1.602 \times 10^{-16}\,\text{J/keV}} = 411\,\text{keV}

  2. Step 2

    Thermal neutrons possess sufficient thermal kinetic energy to overcome any threshold barrier.

    Correct

    A neutron is an electrically neutral particle (q=0q = 0), so the repulsive Coulomb force and resulting potential energy barrier are identically zero (Vc=0V_c = 0).

    Thermal neutrons have very small kinetic energies (about 0.025 eV0.025\,\text{eV}), which is far too low to overcome any electrostatic barrier. The barrier does not exist for neutrons because they carry zero electric charge (q=0q = 0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied Coulomb's potential energy formula for two like charges.

You performed the unit conversion from Joules to kiloelectron-volts accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coulomb barrier origin misconception

No, this reflects a conceptual misunderstanding of why uncharged particles do not experience an electrostatic barrier.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that thermal neutrons overcome a barrier through high kinetic energy. In reality, thermal neutrons have extremely low kinetic energy (Ek≈0.025 eV=2.5×10−5 keVE_k \approx 0.025\,\text{eV} = 2.5 \times 10^{-5}\,\text{keV}); they can initiate nuclear reactions solely because their electric charge is zero (q=0q = 0), meaning no Coulomb repulsion exists between the neutron and the target nucleus.

REASONING PATH
Your ACEpath teacher’s suggested approach
Origin of Coulomb Barrier
  • Coulomb potential energy is proportional to the product of charges: Vc=keq1q2rV_c = \frac{k_e q_1 q_2}{r}.

  • Check the net charge of the incoming projectile before considering its kinetic energy.

Neutron Electrostatic Force
  • Because a neutron has q=0q = 0, Fe=0F_e = 0 and Vc=0V_c = 0 at all distances.

  • Attribute the absence of an electrostatic barrier directly to electrical neutrality (q=0q = 0), not to particle kinetic energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the charge of the incident particle: a neutron has electric charge qn=0q_n = 0.

  2. Apply Coulomb's law: because qn=0q_n = 0, the electrostatic repulsive force Fe=keqnqnucleusr2=0F_e = \frac{k_e q_n q_{\text{nucleus}}}{r^2} = 0, meaning the Coulomb barrier Vc=0V_c = 0.

  3. Conclude that even with tiny thermal kinetic energy (0.025 eV0.025\,\text{eV}), the neutron can reach the nuclear surface unimpeded.

Final answer

(a) Vc=411 keVV_c = 411\,\text{keV}; (b) Neutrons are electrically neutral (q=0q = 0), so they experience zero Coulomb repulsion (Vc=0V_c = 0) when approaching a positive nucleus.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between charged projectiles (protons, alpha particles) that face a Coulomb barrier and neutral projectiles (neutrons) that do not.

  • Notice the dramatic scale difference: nuclear Coulomb barriers are typically hundreds of keV\text{keV} to MeV\text{MeV}, whereas thermal neutrons have energies of mere fractions of an electron-volt (0.025 eV0.025\,\text{eV}).

Lock it in

Similar question

01

Calculate the classical Coulomb potential energy barrier (in keV\text{keV}) for a proton (q=+eq = +e) approaching a tritium nucleus (13H^{3}_{1}\text{H}, q=+eq = +e) to a minimum separation distance of r=4.00×10−15 mr = 4.00 \times 10^{-15}\,\text{m}. Use ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\,\text{N}\cdot\text{m}^2/\text{C}^2 and e=1.602×10−19 Ce = 1.602 \times 10^{-19}\,\text{C}.

Answer

360 keV360\,\text{keV}. Key steps: Vc=kee2r=(8.988×109)(1.602×10−19)24.00×10−15≈5.760×10−14 JV_c = \frac{k_e e^2}{r} = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{4.00 \times 10^{-15}} \approx 5.760 \times 10^{-14}\,\text{J}. Convert to keV\text{keV} by dividing by 1.602×10−16 J/keV1.602 \times 10^{-16}\,\text{J/keV} to obtain Vc≈360 keVV_c \approx 360\,\text{keV}.

02

A deuterium nucleus (Z=1Z = 1) and a helium-3 nucleus (23He^{3}_{2}\text{He}, Z=2Z = 2) undergo fusion when brought to a distance of r=3.20×10−15 mr = 3.20 \times 10^{-15}\,\text{m}. Determine the height of this Coulomb barrier in keV\text{keV}.

Answer

900 keV900\,\text{keV}. Key steps: Vc=ke(e)(2e)r=2kee2rV_c = \frac{k_e (e)(2e)}{r} = \frac{2 k_e e^2}{r}. Directly in eV\text{eV}, Vc=2(8.988×109)(1.602×10−19)3.20×10−15 eV≈8.999×105 eV=900 keVV_c = \frac{2(8.988 \times 10^9)(1.602 \times 10^{-19})}{3.20 \times 10^{-15}}\,\text{eV} \approx 8.999 \times 10^5\,\text{eV} = 900\,\text{keV}.

03

Compare the initiation of nuclear fusion versus neutron-induced fission: (a) Why do fusion reactors require temperatures on the order of 108 K10^8\,\text{K} while fission reactors operate near room temperature or a few hundred degrees Celsius? (b) If a thermal neutron has kinetic energy 0.025 eV0.025\,\text{eV}, why can it induce 235U^{235}\text{U} fission despite having an energy orders of magnitude lower than a fusion Coulomb barrier?

Answer

(a) Fusion involves positively charged nuclei that experience strong Coulomb repulsion and require millions of Kelvin so thermal kinetic energy can overcome the hundreds-of-keV\text{keV} electrostatic barrier. (b) Neutrons carry zero charge (q=0q = 0), so the Coulomb barrier is zero; thermal neutrons enter the range of the strong nuclear force unimpeded and are captured, inducing fission via binding energy release.

Loading workspace…