Resources

A physical chemistry student models the first-order decay of carbon-14 (14C^{14}\text{C}, t1/2=5730 yearst_{1/2} = 5730\text{ years}) using the integrated rate law ln⁡(NtN0)=−kt\ln\left(\frac{N_t}{N_0}\right) = -kt. In radioactive decay modeling, confusing the sign convention between the positive decay constant (k>0k > 0) and the negative rate of change leads to an unphysical exponential explosion (Nt=N0e+ktN_t = N_0 e^{+kt}). For an initial ancient charcoal sample containing 1.20×1020 atoms1.20\times 10^{20}\text{ atoms} of 14C^{14}\text{C}, apply the correct negative rate convention to calculate the true remaining number of 14C^{14}\text{C} atoms after 17190 years17190\text{ years}. Express your final answer in scientific notation to three significant figures.

Answer and steps

Final answer

1.50×1019 atoms1.50\times 10^{19}\text{ atoms}

Steps

Method 1: Number of Half-Lives (Direct Method)

  1. Calculate the number of half-lives elapsed (nn): The half-life of carbon-14 is t1/2=5730 yearst_{1/2} = 5730\text{ years}, and the elapsed time is t=17190 yearst = 17190\text{ years}. n=tt1/2=17190 years5730 years=3n = \frac{t}{t_{1/2}} = \frac{17190\text{ years}}{5730\text{ years}} = 3
  2. Determine the remaining number of atoms (NtN_t): Each half-life reduces the quantity of radioactive nuclei by a factor of 22: Nt=N0(12)nN_t = N_0 \left(\frac{1}{2}\right)^n Substitute the initial quantity N0=1.20×1020 atomsN_0 = 1.20 \times 10^{20}\text{ atoms} and n=3n = 3: Nt=1.20×1020×(12)3=1.20×10208=1.50×1019 atomsN_t = 1.20 \times 10^{20} \times \left(\frac{1}{2}\right)^3 = \frac{1.20 \times 10^{20}}{8} = 1.50 \times 10^{19}\text{ atoms}

Method 2: First-Order Integrated Rate Law

  1. Find the decay constant (kk): For first-order radioactive decay: k=ln⁡2t1/2=ln⁡25730 years≈1.210×10−4 year−1k = \frac{\ln 2}{t_{1/2}} = \frac{\ln 2}{5730\text{ years}} \approx 1.210 \times 10^{-4}\text{ year}^{-1}
  2. Apply the integrated rate law: ln⁡(NtN0)=−kt  ⟹  Nt=N0e−kt\ln\left(\frac{N_t}{N_0}\right) = -kt \implies N_t = N_0 e^{-kt} Substitute kk and t=17190 yearst = 17190\text{ years}: −kt=−(ln⁡25730)(17190)=−3ln⁡2=ln⁡(2−3)-kt = -\left(\frac{\ln 2}{5730}\right)(17190) = -3\ln 2 = \ln\left(2^{-3}\right) Nt=N0eln⁡(2−3)=N0⋅2−3=1.20×10208=1.50×1019 atomsN_t = N_0 e^{\ln\left(2^{-3}\right)} = N_0 \cdot 2^{-3} = \frac{1.20 \times 10^{20}}{8} = 1.50 \times 10^{19}\text{ atoms}

Common Pitfall to Avoid

  • Sign Confusion in the Exponent: Radioactive decay represents a loss of nuclei over time (dN/dt=−kNdN/dt = -kN). Forgetting the negative sign in the integrated rate law (Nt=N0e+ktN_t = N_0 e^{+kt}) predicts exponential growth rather than decay, giving an unphysical value of 9.60×1020 atoms9.60 \times 10^{20}\text{ atoms}. Always ensure the exponent is negative when modeling decay.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the sign in the exponential integrated rate law by using a positive exponent, resulting in exponential growth instead of decay.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n=171905730=3 half-lives  ⟹  k=ln⁡(2)5730=0.000121 yr−1n = \frac{17190}{5730} = 3\text{ half-lives} \implies k = \frac{\ln(2)}{5730} = 0.000121\text{ yr}^{-1}

  2. Step 2

    Nt=N0⋅e(kt)=1.20×1020⋅23N_t = N_0 \cdot e^{(kt)} = 1.20 \times 10^{20} \cdot 2^3

    Correct

    Nt=N0e−kt=N0(12)n=1.20×1020⋅2−3N_t = N_0 e^{-kt} = N_0 \left(\frac{1}{2}\right)^n = 1.20 \times 10^{20} \cdot 2^{-3}

    Radioactive decay involves a loss of atoms over time, so the integrated rate law requires a negative exponent: Nt=N0e−ktN_t = N_0 e^{-kt}. Using a positive exponent multiplies the sample by 2n2^n rather than dividing by 2n2^n.

  3. Step 3

    Nt=1.20×1020⋅8=9.60×1020 atomsN_t = 1.20 \times 10^{20} \cdot 8 = 9.60 \times 10^{20}\text{ atoms}

    Correct

    Nt=1.20×10208=1.50×1019 atomsN_t = \frac{1.20 \times 10^{20}}{8} = 1.50 \times 10^{19}\text{ atoms}

    Carrying the sign error forward resulted in an unphysical eight-fold increase in the number of 14C^{14}\text{C} atoms instead of an eight-fold decrease.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the number of elapsed half-lives as n=3n = 3.

You correctly applied the relation k=ln⁡2t1/2k = \frac{\ln 2}{t_{1/2}} to find the decay constant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Rate Law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the sign convention between exponential growth (e+kte^{+kt}) and exponential decay (e−kte^{-kt}), forgetting that decay requires a negative exponent because the quantity of radioactive nuclei decreases over time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Decay Sign Rule
  • For any radioactive decay process with k>0k > 0, the remaining amount decreases according to Nt=N0e−kt=N0(1/2)nN_t = N_0 e^{-kt} = N_0 (1/2)^n.

  • Always verify that the exponent is negative (or that Nt<N0N_t < N_0) whenever modeling decay.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the negative exponent for radioactive decay: Nt=N0e−kt=N0⋅2−3N_t = N_0 e^{-kt} = N_0 \cdot 2^{-3}.

  2. Divide the initial sample quantity by 23=82^3 = 8: Nt=1.20×10208N_t = \frac{1.20 \times 10^{20}}{8}.

Final answer

1.50×1019 atoms1.50 \times 10^{19}\text{ atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a quick physical reality check: if time has passed, the remaining radioactive atoms must be strictly less than the initial amount (Nt<N0N_t < N_0).

  • Practice converting e−kte^{-kt} into (1/2)n(1/2)^n to reinforce that decay repeatedly halves the sample quantity.

OverviewACEpath Teacher's Diagnosis

02 The student confuses exponential first-order decay with a linear rate of loss over three half-lives.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Number of half-lives=171905730=3\text{Number of half-lives} = \frac{17190}{5730} = 3

  2. Step 2

    Amount decayed=3×(0.50×1.20×1020)=1.80×1020 atoms  ⟹  Remaining fraction=1−3×0.5=−0.5\text{Amount decayed} = 3 \times (0.50 \times 1.20 \times 10^{20}) = 1.80 \times 10^{20}\text{ atoms} \implies \text{Remaining fraction} = 1 - 3 \times 0.5 = -0.5

    Correct

    Nt=N0(12)n=1.20×1020(12)3=1.20×10208=1.50×1019 atomsN_t = N_0\left(\frac{1}{2}\right)^n = 1.20 \times 10^{20}\left(\frac{1}{2}\right)^3 = \frac{1.20 \times 10^{20}}{8} = 1.50 \times 10^{19}\text{ atoms}

    Radioactive decay is a first-order exponential process where the remaining sample halves each period, represented by multiplying by (12)n\left(\frac{1}{2}\right)^n, not by subtracting n×50%n \times 50\% of the initial amount.

  3. Step 3

    Nt=0 atomsN_t = 0\text{ atoms}

    Correct

    Nt=1.50×1019 atomsN_t = 1.50 \times 10^{19}\text{ atoms}

    Because your linear model produced a negative fraction (−0.5-0.5), setting the count to 0 atoms0\text{ atoms} was an artifact of the earlier linear decay error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the half-life relation and computed the number of elapsed half-lives as n=3n = 3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear decay misconception in radioactive half-life

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated each half-life as subtracting a fixed 50% of the original starting population rather than repeatedly taking half of the remaining population at each successive half-life.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponential Halving Rule
  • For nn half-lives, the remaining fraction is (12)n\left(\frac{1}{2}\right)^n, never 1−0.5n1 - 0.5n.

  • Always apply the base factor of 12\frac{1}{2} as an exponent: Nt=N0⋅2−nN_t = N_0 \cdot 2^{-n}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the remaining fraction after n=3n = 3 half-lives: (12)3=18=0.125\left(\frac{1}{2}\right)^3 = \frac{1}{8} = 0.125.

  2. Multiply the initial population by this fraction: Nt=1.20×1020×0.125N_t = 1.20 \times 10^{20} \times 0.125.

Final answer

1.50×1019 atoms1.50 \times 10^{19}\text{ atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between linear loss (Nt=N0−klineartN_t = N_0 - k_{\text{linear}}t) and first-order exponential decay (Nt=N0e−kt=N0(1/2)nN_t = N_0 e^{-kt} = N_0(1/2)^n).

  • Practice tracking remaining amounts step-by-step through successive halving (100%→50%→25%→12.5%100\% \to 50\% \to 25\% \to 12.5\%).

OverviewACEpath Teacher's Diagnosis

03 The student multiplies the initial quantity by the half-life fraction (1/2 * 3) instead of raising 1/2 to the power of 3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    tt1/2=171905730=3\frac{t}{t_{1/2}} = \frac{17190}{5730} = 3

  2. Step 2

    Nt=N0∗(12∗3)=1.20×1020∗1.5N_t = N_0 * \left(\frac{1}{2} * 3\right) = 1.20 \times 10^{20} * 1.5

    Correct

    Nt=N0(12)3=1.20×1020×18N_t = N_0 \left(\frac{1}{2}\right)^3 = 1.20 \times 10^{20} \times \frac{1}{8}

    Radioactive decay is an exponential process where each half-life divides the remaining sample by 22. The remaining fraction after nn half-lives is (12)n\left(\frac{1}{2}\right)^n, not 12×n\frac{1}{2} \times n.

  3. Step 3

    Nt=1.80×1020 atomsN_t = 1.80 \times 10^{20}\text{ atoms}

    Correct

    Nt=1.50×1019 atomsN_t = 1.50 \times 10^{19}\text{ atoms}

    Because you multiplied by 1.51.5 in the previous step, your final value grew to 1.80×1020 atoms1.80 \times 10^{20}\text{ atoms}, which is larger than the starting amount of 1.20×1020 atoms1.20 \times 10^{20}\text{ atoms}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the given half-life and elapsed time to find n=3n = 3 half-lives.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear scaling instead of exponential decay

You treated the number of half-lives as a scalar multiplier rather than an exponent of the decay factor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing repeated multiplicative halving with simple multiplication: each successive half-life cuts the remaining sample in half again, giving (12)×(12)×(12)=(12)3=18\left(\frac{1}{2}\right) \times \left(\frac{1}{2}\right) \times \left(\frac{1}{2}\right) = \left(\frac{1}{2}\right)^3 = \frac{1}{8}, whereas multiplying 12×3=1.5\frac{1}{2} \times 3 = 1.5 improperly predicts growth.

REASONING PATH
Your ACEpath teacher’s suggested approach
Exponential Half-Life Formula
  • For nn elapsed half-lives, Nt=N0(12)n=N02nN_t = N_0 \left(\frac{1}{2}\right)^n = \frac{N_0}{2^n}.

  • Always place the number of half-lives nn in the exponent of 12\frac{1}{2}.

Physical Reality Check
  • In radioactive decay, NtN_t must strictly decrease over time (Nt<N0N_t < N_0 for any t>0t > 0).

  • Check whether your calculated remaining amount is smaller than the initial amount before finalizing your answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the exponential halving relationship: Nt=N0(12)n=1.20×1020×(12)3N_t = N_0 \left(\frac{1}{2}\right)^n = 1.20 \times 10^{20} \times \left(\frac{1}{2}\right)^3.

  2. Evaluate the power: (12)3=18=0.125\left(\frac{1}{2}\right)^3 = \frac{1}{8} = 0.125.

  3. Compute the remaining atoms: Nt=1.20×1020×0.125=1.50×1019 atomsN_t = 1.20 \times 10^{20} \times 0.125 = 1.50 \times 10^{19}\text{ atoms}.

Final answer

1.50×1019 atoms1.50 \times 10^{19}\text{ atoms}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formula Nt=N0(12)nN_t = N_0 \left(\frac{1}{2}\right)^n and practice writing out halving steps explicitly (N0→12N0→14N0→…N_0 \to \frac{1}{2}N_0 \to \frac{1}{4}N_0 \to \dots).

  • Always compare your final value to the initial quantity to confirm that the material has decayed rather than grown.

Lock it in

Similar question

01

A sample of iodine-131 (t1/2=8.0 dayst_{1/2} = 8.0\text{ days}) initially contains 6.40×1018 atoms6.40 \times 10^{18}\text{ atoms}. Using the integrated rate law with the proper sign convention, determine the number of 131I^{131}\text{I} atoms remaining after 24.0 days24.0\text{ days}.

Answer

8.00×1017 atoms8.00 \times 10^{17}\text{ atoms}. Key steps: n=24.08.0=3n = \frac{24.0}{8.0} = 3 half-lives. Nt=N0e−kt=N0(12)3=6.40×10188=8.00×1017 atomsN_t = N_0 e^{-kt} = N_0 \left(\frac{1}{2}\right)^3 = \frac{6.40 \times 10^{18}}{8} = 8.00 \times 10^{17}\text{ atoms}.

02

Phosphorus-32 undergoes first-order radioactive decay with a decay constant k=0.0485 day−1k = 0.0485\text{ day}^{-1}. If an initial sample has an activity of 500.0 Bq500.0\text{ Bq}, calculate its activity after 28.6 days28.6\text{ days}. Express your answer to three significant figures.

Answer

125 Bq125\text{ Bq}. Key steps: Activity decays identically to atom count: At=A0e−ktA_t = A_0 e^{-kt}. Here, −kt=−(0.0485 day−1)(28.6 days)≈−1.387≈−2ln⁡2-kt = -(0.0485\text{ day}^{-1})(28.6\text{ days}) \approx -1.387 \approx -2\ln 2. Thus At=500.0×e−1.387=500.0×(12)2=125 BqA_t = 500.0 \times e^{-1.387} = 500.0 \times \left(\frac{1}{2}\right)^2 = 125\text{ Bq}.

03

A geologist measures a rock specimen where potassium-40 has decayed for 2.50×109 years2.50 \times 10^9\text{ years}. If the half-life of 40K^{40}\text{K} is 1.25×109 years1.25 \times 10^9\text{ years} and the current quantity remaining is 3.25×1015 atoms3.25 \times 10^{15}\text{ atoms}, calculate the initial number of 40K^{40}\text{K} atoms N0N_0 originally present in the rock.

Answer

1.30×1016 atoms1.30 \times 10^{16}\text{ atoms}. Key steps: n=2.50×1091.25×109=2n = \frac{2.50 \times 10^9}{1.25 \times 10^9} = 2 half-lives. Since Nt=N0(12)2=N04N_t = N_0 \left(\frac{1}{2}\right)^2 = \frac{N_0}{4}, the initial quantity is N0=4×Nt=4×(3.25×1015)=1.30×1016 atomsN_0 = 4 \times N_t = 4 \times (3.25 \times 10^{15}) = 1.30 \times 10^{16}\text{ atoms}.

Loading workspace…