Resources
In a nuclear radiochemistry laboratory, an unknown radioactive liquid sample emitting ionizing radiation is placed between the poles of a magnetic field oriented perpendicularly into the page, followed by an array of absorbing barriers. A Geiger-Müller detector registers that of the emitted count is deflected along a curved path toward the positive electrode plate and completely stopped by a aluminum plate, while the remaining undeflected easily passes through both the aluminum plate and a lead brick. Identify the two distinct decay modes present in the sample, matching each to its experimental deflection and penetration behavior.
Answer and steps
Final answer
The deflected, aluminum-attenuated component corresponds to beta-minus () decay (negatively charged high-speed electrons); the undeflected, highly penetrating component through lead corresponds to gamma () decay (high-energy neutral photons).
Steps
Determine the charge from deflection behavior
To identify the decay modes, we analyze the charge and penetrating power of each emitted radiation component.
When ionizing radiation passes through an electric or magnetic field, its path depends on its electric charge ():
- Component 1: Deflects along a curved path toward the positive electrode plate. Because opposite charges attract, this radiation must carry a negative electric charge ().
- Component 2: Continues along a straight path without any deflection. This indicates that it carries zero net electric charge ().
Determine the radiation type from penetrating power
Different forms of nuclear radiation interact with matter according to their mass, charge, and energy:
- Alpha () particles (): Heavy, doubly positive particles with very low penetration; they are stopped by a sheet of paper or a few centimeters of air.
- Beta () particles ( or ): High-speed electrons () or positrons (). They have moderate penetration and are completely stopped by a few millimeters of aluminum (such as the plate).
- Gamma () rays (): High-energy, massless electromagnetic photons. They have no charge and extremely high penetration power, requiring dense materials like thick lead bricks or concrete to significantly attenuate them.
Match each component to its decay mode
-
Deflected, aluminum-stopped component:
- Charge: Negative (attracted to the positive plate).
- Penetration: Completely absorbed by of aluminum.
- Conclusion: This component consists of high-speed electrons emitted during beta-minus () decay.
-
Undeflected, lead-penetrating component:
- Charge: Neutral (no deflection in the field).
- Penetration: Readily passes through both the aluminum barrier and of lead.
- Conclusion: This component consists of high-energy photons emitted during gamma () decay.
Typical errors
01 The student confuses the charges of alpha and beta radiation, misidentifying the component deflected toward the positive plate as alpha decay.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Deflected radiation curves toward positive plate, so it is alpha decay. Alpha particles are absorbed by Al.
CorrectRadiation curving toward the positive plate carries a negative charge () and is stopped by of aluminum, corresponding to beta-minus () decay.
Because opposite charges attract, radiation deflected toward a positive electrode must carry a negative charge. Alpha particles carry a charge (and would deflect toward a negative plate, being stopped already by paper), whereas beta-minus particles (electrons) carry a charge and are stopped by a few millimeters of aluminum.
- Step 2
Undeflected radiation passes through lead, so it has no charge. This component is gamma decay.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that undeflected radiation carries zero electric charge.
You accurately identified that high-energy radiation penetrating through centimeters of lead corresponds to gamma () decay.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the electric charge and penetrating power of alpha and beta-minus particles, concluding that radiation attracted toward a positive plate was positively charged alpha radiation rather than negatively charged beta radiation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Electrostatic Deflection Rule
Opposite charges attract; like charges repel. A particle deflected toward a positive plate must have a negative charge ().
Identify the sign of the charged plate attracting the beam, deduce that the particle has the opposite sign, and match it to (), (), or ().
- Relative Penetrating Power
is stopped by paper/skin; is stopped by a few millimeters of aluminum; requires dense lead or thick concrete.
Check the barrier material: of aluminum stops beta radiation, whereas alpha radiation cannot even reach this barrier.
CORRECTED PATH
ACEpath Teacher's DemonstrationNote that the beam curves toward the positive electrode plate, meaning the particles experience an attractive force toward .
Deduce that the particles must carry a negative charge ().
Recall that beta-minus () particles are high-speed electrons with charge and are completely stopped by a few millimeters of aluminum ().
Combine this with the correctly identified gamma () component.
The deflected component is beta-minus () decay, and the undeflected component is gamma () decay.
02 The student ignores the direction of deflection toward the positive plate and assumes positron or beta-plus decay instead of beta-minus decay.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Radiation deflected and stopped by aluminum is beta-plus decay. ⟹ Positrons are absorbed by the aluminum plate.
CorrectDeflection toward the positive electrode plate indicates a negative charge (). Combined with absorption by of aluminum, this identifies beta-minus () decay (electrons).
You correctly matched the aluminum attenuation to beta radiation, but because the particles curve toward the positive plate, opposite charges attract—meaning the particles carry a negative charge ( / electrons), not a positive charge ( / positrons).
- Step 2
Undeflected radiation penetrating lead is gamma decay. ⟹ High-energy photons pass through lead.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that uncharged radiation passing through dense lead represents gamma () decay.
You correctly recalled that beta-range particles are shielded by a few millimeters of aluminum.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the moderate penetrating power with beta decay, but you overlooked electrostatic attraction: particles attracted to a positive electrode plate must carry a negative charge ( / electrons), whereas positrons () are repelled by positive charges.
REASONING PATH
Your ACEpath teacher’s suggested approach- Electrostatic Deflection Rule
Like charges repel; opposite charges attract.
Check which electrode plate the beam bends toward: attraction toward the positive plate indicates negative charge (), while attraction toward the negative plate indicates positive charge ( or ).
CORRECTED PATH
ACEpath Teacher's DemonstrationObserve that the deflected beam bends toward the positive electrode plate.
Apply Coulomb's law: attraction to a positive plate requires a negative charge ().
Pair the negative charge with complete absorption by of aluminum to identify high-speed electrons ().
Conclude that this component originates from beta-minus () decay.
The sample undergoes beta-minus () decay (deflected toward the positive plate, stopped by aluminum) and gamma () decay (undeflected, penetrates lead).
03 The student misinterprets the high-penetrating undeflected component as neutron emission instead of electromagnetic gamma radiation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Particles deflected toward the positive plate are negatively charged beta-minus decay. Beta electrons are stopped by Al.
- Step 2
Undeflected radiation that penetrates heavy lead shielding consists of uncharged particles. The second mode is neutron emission.
CorrectThe undeflected component carries zero charge and penetrates thick lead, identifying it as gamma () decay (high-energy neutral photons).
While you correctly recognized that the undeflected radiation carries zero electric charge, the primary neutral, highly penetrating ionizing radiation commonly encountered in standard radioactive decay that penetrates heavy lead bricks consists of high-energy gamma () photons rather than free neutrons.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly determined that attraction toward the positive plate corresponds to a negative charge.
You accurately linked moderate penetration stopped by of aluminum to beta particles.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNone.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated uncharged, penetrating radiation with neutral massive particles (neutrons) instead of recognizing that electromagnetic photons emitted during nuclear de-excitation are gamma rays, which classically require heavy, dense elements like lead for shielding.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Standard Decay Radiation Types
Standard nuclear emissions are alpha (, ), beta-minus (, ), beta-plus (, ), and gamma (, ).
When classifying common radioactive decay emissions, check whether neutral radiation represents high-energy electromagnetic gamma photons before considering particle emission.
- Shielding Characteristics of Neutral Radiations
High-density materials with high atomic numbers (like lead) efficiently attenuate high-energy gamma rays through photoelectric absorption, Compton scattering, and pair production, whereas neutrons are primarily attenuated by hydrogenous materials (e.g., water, paraffin).
Recognize heavy lead penetration/attenuation as the classic experimental hallmark of gamma () rays.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the primary modes of natural and laboratory nuclear decay: , , , and .
Radiation with zero electric charge () travels undeflected through electric and magnetic fields.
Because gamma rays are high-energy photons with no mass or charge, they possess extremely high penetrating power and are traditionally tested against thick lead shielding.
Therefore, the undeflected, lead-penetrating component corresponds to gamma () radiation.
The two decay modes are beta-minus () decay and gamma () decay.
Lock it in
What are the electric charges of alpha (), beta-minus (), and gamma () radiation?
carries , carries , and carries . Remember that alpha particles are helium nuclei, beta particles are electrons, and gamma rays are neutral photons.
Similar question
A radioactive source emits two types of radiation through an electric field. Component A deflects sharply toward the negative plate and is absorbed by a sheet of paper. Component B does not deflect and requires several centimeters of lead to attenuate. Identify the two decay modes.
Answer
Component A is alpha () decay because it is positively charged (attracted to the negative plate) and has low penetrating power (stopped by paper). Component B is gamma () decay because it is uncharged (no deflection) and highly penetrating through lead.
In a uniform electric field between two horizontal plates (top plate positive, bottom plate negative), a radiation beam splits into three paths: Path 1 curves upward with a large deflection, Path 2 travels straight, and Path 3 curves gently downward. Identify the particles following Path 1, Path 2, and Path 3, and explain the difference in deflection between Paths 1 and 3.
Answer
Path 1 is beta-minus () radiation (negatively charged electrons attracted upward). Path 2 is gamma () radiation (neutral photons). Path 3 is alpha () radiation (positively charged helium nuclei attracted downward). Path 1 deflects much more sharply than Path 3 because an electron has a far smaller mass-to-charge ratio () than a heavy alpha particle.
A nuclear sample undergoes radioactive decay emitting particles that are absorbed by of copper foil but easily pass through paper. When passed through a perpendicular magnetic field, they deflect in the exact opposite direction of an electron beam of identical velocity. Identify the specific type of decay and the emitted particle.
Answer
The decay is beta-plus () decay, emitting positrons (). Moderate penetration through paper but absorption by metal foil matches beta radiation, while deflecting opposite to an electron beam indicates an equal magnitude but positive charge ().