Resources
Consider the series of normal straight-chain alkanes () as carbon chain length becomes very large (). At , methane () is a gas (boiling point ), hexane () is a volatile liquid (boiling point ), eicosane () is a waxy solid (melting point ), and ultra-high-molecular-weight polyethylene () is a rigid crystalline structural solid with melting points exceeding . (a) Express the total number of electrons in an alkane molecule as a linear function of . (b) Explain how the asymptotic increase in chain length transforms individually weak dispersion forces (typically per methylene contact) into a dominant macroscopic mechanical cohesion that suppresses vapor pressure to effectively zero.
Answer and steps
Final answer
(a) ; (b) Because London dispersion forces are additive along the contact surface of extended chains, as the polarizability and total contact surface area scale linearly with , causing the cumulative intermolecular attraction per polymer chain () to exceed covalent bond energies, reducing volatility to zero () and causing the polymer to decompose thermally before it can vaporize.
Steps
Part (a): Total Number of Electrons as a Function of
A neutral straight-chain alkane has the general chemical formula .
- Count electrons contributed by carbon atoms: Each carbon atom () has an atomic number of , contributing electrons:
- Count electrons contributed by hydrogen atoms: Each hydrogen atom () has an atomic number of , contributing electron:
- Sum the contributions to find :
Part (b): Emergence of Macroscopic Cohesion and Suppression of Vapor Pressure
-
Origin of Dispersion Forces: London dispersion forces arise from instantaneous fluctuations in electron density that induce complementary dipoles in neighboring molecules. Their strength depends directly on:
- Molecular polarizability: Proportional to the size and looseness of the electron cloud, which grows linearly with .
- Surface contact area: Long, flexible, straight-chain molecules can align in parallel, providing extensive surface-to-surface contact along their backbones.
- Additivity along the Chain: While an isolated (methylene) segment contributes only a modest attractive interaction (), these forces are strictly additive along the full contact length of adjacent chains: For very large chain lengths (such as ultra-high-molecular-weight polyethylene where ), the cumulative dispersion energy holding a single macromolecule within the crystal lattice reaches tens of thousands of kilojoules per mole.
- Comparison with Covalent Bond Energies: A typical carbon-carbon single bond () has a bond dissociation energy of approximately . When is very large, the total intermolecular dispersion energy binding a polymer chain to its neighbors far exceeds the covalent strength of the backbone bonds:
- Suppression of Vapor Pressure: According to the Clausius-Clapeyron relationship: Because the enthalpy of vaporization scales with the cumulative intermolecular forces (), it diverges toward infinity as , driving . Consequently, the energy required to vaporize an intact chain exceeds the energy required to break the covalent backbone, causing the substance to thermally decompose (pyrolyze) rather than boil.
Typical errors
01 The student counts only valence electrons instead of total electrons when calculating Ne(n).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You counted valence electrons rather than total electrons. Carbon has an atomic number of , so each neutral carbon atom contributes electrons, giving total electrons.
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou clearly explained the microscopic origin of London dispersion forces and their additivity along extended molecular chains.
You correctly related the cumulative dispersion energy of ultra-long chains to the macroscopic suppression of vapor pressure.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated valence electron count (used for Lewis structures and bonding) with the total number of electrons (which determines overall polarizability and dispersion interactions).
REASONING PATH
Your ACEpath teacher’s suggested approach- Atomic Number vs. Valence Electrons
Total electrons in a neutral atom equal the atomic number . Valence electrons are only the outermost shell electrons ().
Use the full atomic number when calculating total molecular electrons for polarizability and dispersion forces.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the atomic number for each element: carbon has total electrons, and hydrogen has total electron.
Multiply by the stoichiometric subscripts in : carbon contributes electrons, and hydrogen contributes electrons.
Sum the two contributions: .
(a) ; (b) London dispersion forces are additive along the chain backbone (). As , polarizability and contact area scale linearly with , making cumulative intermolecular attraction so strong that it exceeds covalent bond dissociation energies, driving vapor pressure to zero ().
02 The student misattributes the strong macroscopic cohesion in ultra-high-molecular-weight polyethylene to the formation of intermolecular covalent bonds rather than extensive additive intermolecular dispersion forces.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Each carbon has electrons and each hydrogen has electron.
- Step 2
As chain length becomes very long, adjacent chains cross-link by forming covalent bonds with each other.
CorrectLinear alkane chains remain distinct molecules that do not form intermolecular covalent bonds; instead, London dispersion forces scale additively with chain length () due to increasing polarizability and extensive surface-to-surface contact area.
Linear alkanes are saturated hydrocarbons (-hybridized carbons with full octets) that do not spontaneously form covalent cross-links under ordinary physical conditions. The cohesion arises purely from intermolecular London dispersion forces.
- Step 3
These strong covalent bonds between chains create a network solid, which locks the chains in place and eliminates vapor pressure entirely.
CorrectThe cumulative dispersion energy per macromolecule scales with and exceeds individual covalent bond energies, causing the enthalpy of vaporization to diverge toward infinity and suppressing vapor pressure ().
Because this conclusion relies on the incorrect premise that the chains form a covalent network solid, the explanation of the phase behavior is affected. The suppression of vapor pressure is driven thermodynamically by the divergence of cumulative dispersion energy, which leads to thermal decomposition before vaporization can occur.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly counted the atomic electrons from carbon and hydrogen to find the total electron function .
You correctly recognized that extremely long alkane chains produce a rigid solid with an undetectable vapor pressure.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misunderstanding about the nature of intermolecular forces in high polymers rather than an inadvertent calculation slip.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that high mechanical rigidity and zero vapor pressure require intermolecular covalent bonds (a covalent network), overlooking the fact that weak non-covalent dispersion forces become enormous when summed over thousands of repeating units along parallel aligned backbones.
REASONING PATH
Your ACEpath teacher’s suggested approach- Nature of polymer intermolecular cohesion
Saturated linear polymers consist of separate macromolecules held together exclusively by secondary (intermolecular) forces unless chemically cross-linked by a vulcanizing or curing agent.
Always verify whether a physical phase transition involves breaking intermolecular attractions or covalent bonds.
- Additivity of dispersion forces
Dispersion energy is additive along the molecular backbone: . When , .
Attribute polymer cohesion to the cumulative sum of dispersion forces over long contact lengths rather than the formation of new chemical bonds.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that each methylene contact contributes approximately of London dispersion attraction.
Express the total intermolecular attraction per chain as an additive sum: .
Note that for , reaches tens of thousands of , far exceeding the energy of an individual covalent bond ().
Apply the Clausius-Clapeyron relation where , proving that and the polymer decomposes before vaporizing.
(a) ; (b) London dispersion forces are additive along the extensive contact surface of the parallel extended chains. As , the cumulative dispersion energy per molecule scales linearly with () and far exceeds the covalent bond dissociation energy of the backbone. This diverges toward infinity and suppresses vapor pressure to zero (), causing the polymer to decompose thermally before any intact molecules can vaporize.
Lock it in
What is the difference between total electrons and valence electrons when determining molecular polarizability?
Total electrons () includes all core and valence electrons, and every electron contributes to polarizability and London dispersion forces.
Similar question
Express the total number of electrons in an unbranched alkene with one double bond, having the general formula , as a function of .
Answer
. Each carbon contributes electrons () and each hydrogen contributes electron (), summing to .
Consider a linear perfluoroalkane series . (a) Find the total electron count . (b) Compare the slope of with that of normal alkanes and predict which series exhibits a steeper increase in polarizability per added backbone carbon.
Answer
(a) . Carbon contributes electrons and fluorine () contributes , giving . (b) The slope for perfluoroalkanes is electrons per carbon atom compared to for alkanes; thus, perfluoroalkanes add electron count and overall electronic volume at three times the rate per unit.
A polyethylene chain has a degree of polymerization . Assuming an effective dispersion interaction of per contact and an average carbon-carbon single bond enthalpy of , calculate the cumulative intermolecular contact energy per chain and explain why high-density polyethylene decomposes thermally instead of boiling.
Answer
The cumulative dispersion energy is approximately . Because , the energy needed to separate whole polymer chains against intermolecular forces far exceeds the energy required to break covalent bonds in the backbone, causing thermal degradation (cracking) prior to vaporization.