Resources

Agricultural runoff introduces calcium chloride (CaCl2\text{CaCl}_2, molar mass 110.98 g/mol110.98\text{ g/mol}) into the soil surrounding a crop root system at an environmental scale concentration of 888 mg/L888\text{ mg/L} at 25∘C25^\circ\text{C} (298.15 K298.15\text{ K}). Assuming complete ionic dissociation (i=3.0i = 3.0) and R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}), convert the concentration to molarity (M\text{M}) and calculate the osmotic/solute potential (Ψs\Psi_s) of the soil solution in bar\text{bar} (1 MPa=10 bar1\text{ MPa} = 10\text{ bar}). Round to three significant figures.

Answer and steps

Final answer

Molarity =0.00800 M= 0.00800\text{ M}; Ψs=−0.595 bar\Psi_s = -0.595\text{ bar} (or −0.0595 MPa-0.0595\text{ MPa})

Steps

01

Calculate the Molarity (CC) of the Solution

Molarity (CC) represents the number of moles of solute per liter of solution. First, convert the given mass concentration from milligrams per liter (mg/L\text{mg/L}) to grams per liter (g/L\text{g/L}):

Concentration in g/L=888 mg/L1000 mg/g=0.888 g/L\text{Concentration in g/L} = \frac{888\text{ mg/L}}{1000\text{ mg/g}} = 0.888\text{ g/L}

Next, divide the mass concentration by the molar mass of calcium chloride (CaClX2\ce{CaCl2}, 110.98 g/mol110.98\text{ g/mol}):

C=0.888 g/L110.98 g/mol≈0.0080014 mol/L≈0.00800 MC = \frac{0.888\text{ g/L}}{110.98\text{ g/mol}} \approx 0.0080014\text{ mol/L} \approx 0.00800\text{ M}


02

Calculate the Solute Potential (Ψs\Psi_s)

The solute (osmotic) potential represents the reduction in water potential caused by the presence of dissolved solutes. It is calculated using the van 't Hoff relation:

Ψs=−iCRT\Psi_s = -i C R T

Where:

  • i=3.0i = 3.0 (the ionization constant, representing complete dissociation into one CaX2+\ce{Ca^{2+}} and two ClX−\ce{Cl-} ions)
  • C=0.0080014 mol/LC = 0.0080014\text{ mol/L}
  • R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})
  • T=298.15 KT = 298.15\text{ K}

Substitute the known values into the equation:

Ψs=−(3.0)⋅(0.0080014 mol/L)⋅(0.00831 L⋅MPa/(mol⋅K))⋅(298.15 K)\Psi_s = -(3.0) \cdot (0.0080014\text{ mol/L}) \cdot (0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K})) \cdot (298.15\text{ K})

Ψs≈−0.05947 MPa\Psi_s \approx -0.05947\text{ MPa}

Common Pitfall: Solute potential (Ψs\Psi_s) is always zero or negative. Pure water has a solute potential of 0 MPa0\text{ MPa}; adding solute always lowers the potential, so do not omit the negative sign.


03

Convert to Bars and Round

Using the conversion factor 1 MPa=10 bar1\text{ MPa} = 10\text{ bar}:

Ψs=−0.05947 MPa⋅10 bar/MPa≈−0.595 bar\Psi_s = -0.05947\text{ MPa} \cdot 10\text{ bar/MPa} \approx -0.595\text{ bar}

Rounding to three significant figures gives:

  • Molarity: 0.00800 M0.00800\text{ M}
  • Solute Potential (Ψs\Psi_s): −0.595 bar-0.595\text{ bar} (or −0.0595 MPa-0.0595\text{ MPa})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that solute potential is defined with a negative sign and calculates a positive value of 0.595 bar.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    888 mg/L=0.888 g/L  ⟹  M=0.888110.98=0.00800 M888\text{ mg/L} = 0.888\text{ g/L} \implies M = \frac{0.888}{110.98} = 0.00800\text{ M}

  2. Step 2

    Ψs=iCRT  ⟹  Ψs=(3.0)(0.00800)(0.00831)(298.15)=0.0595 MPa\Psi_s = i C R T \implies \Psi_s = (3.0)(0.00800)(0.00831)(298.15) = 0.0595\text{ MPa}

    Correct

    Ψs=−iCRT=−(3.0)(0.0080014)(0.00831)(298.15)≈−0.0595 MPa\Psi_s = -iCRT = -(3.0)(0.0080014)(0.00831)(298.15) \approx -0.0595\text{ MPa}

    You used Ψs=iCRT\Psi_s = iCRT instead of Ψs=−iCRT\Psi_s = -iCRT. Dissolving solutes always reduces the free energy of water, so solute potential is defined with a negative sign and is always ≤0\le 0.

  3. Step 3

    Ψs=0.0595×10=0.595 bar\Psi_s = 0.0595 \times 10 = 0.595\text{ bar}

    Correct

    Ψs=−0.05947 MPa×10 bar/MPa≈−0.595 bar\Psi_s = -0.05947\text{ MPa} \times 10\text{ bar/MPa} \approx -0.595\text{ bar}

    Your unit conversion arithmetic from MPa\text{MPa} to bar\text{bar} is correct, but the final value inherits the missing negative sign from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mass concentration into molar concentration.

You correctly identified and substituted all numerical parameters (ii, CC, RR, and TT).

You accurately converted pressure units from megapascals to bars.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted negative sign in solute potential formula

You wrote Ψs=iCRT\Psi_s = iCRT without the leading negative sign, yielding a positive potential instead of a negative one.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating osmotic pressure (Π\Pi, a positive colligative property defined as Π=iCRT\Pi = iCRT) with solute/osmotic potential (Ψs\Psi_s, a water potential component defined as Ψs=−Π=−iCRT\Psi_s = -\Pi = -iCRT).

REASONING PATH
Your ACEpath teacher’s suggested approach
Negative Sign of Solute Potential
  • Pure water at atmospheric pressure has Ψs=0 bar\Psi_s = 0\text{ bar}. Solute particles bind water molecules and reduce their free energy, making Ψs\Psi_s strictly negative for any solution.

  • Always write the formula as Ψs=−iCRT\Psi_s = -iCRT and verify that your final solute potential is negative before moving to the next step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the full van 't Hoff equation with its negative sign: Ψs=−iCRT\Psi_s = -iCRT.

  2. Substitute the values: Ψs=−(3.0)(0.0080014 mol/L)(0.00831 L⋅MPa/(mol⋅K))(298.15 K)≈−0.05947 MPa\Psi_s = -(3.0)(0.0080014\text{ mol/L})(0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}))(298.15\text{ K}) \approx -0.05947\text{ MPa}.

  3. Convert to bars: Ψs=−0.05947 MPa×10 bar/MPa≈−0.595 bar\Psi_s = -0.05947\text{ MPa} \times 10\text{ bar/MPa} \approx -0.595\text{ bar}.

Final answer

Molarity =0.00800 M= 0.00800\text{ M}; Ψs=−0.595 bar\Psi_s = -0.595\text{ bar}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between osmotic pressure (Π\Pi) and solute potential (Ψs=−Π\Psi_s = -\Pi).

  • Practice calculating total water potential (Ψ=Ψp+Ψs\Psi = \Psi_p + \Psi_s) across plant root-soil boundaries to see why a negative Ψs\Psi_s is essential for spontaneous water uptake.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the ionization factor i = 3.0 for complete dissociation and calculates the potential assuming i = 1.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    888 mg/L=0.888 g/L  ⟹  M=0.888/110.98=0.00800 M888\text{ mg/L} = 0.888\text{ g/L} \implies M = 0.888 / 110.98 = 0.00800\text{ M}

  2. Step 2

    Ψs=−CRT  ⟹  Ψs=−(0.00800)(0.00831)(298.15)=−0.01982 MPa\Psi_s = -CRT \implies \Psi_s = -(0.00800)(0.00831)(298.15) = -0.01982\text{ MPa}

    Correct

    Ψs=−iCRT=−(3.0)(0.00800)(0.00831)(298.15)≈−0.05947 MPa\Psi_s = -iCRT = -(3.0)(0.00800)(0.00831)(298.15) \approx -0.05947\text{ MPa}

    You used Ψs=−CRT\Psi_s = -CRT instead of Ψs=−iCRT\Psi_s = -iCRT. Because calcium chloride (CaCl2\text{CaCl}_2) dissociates completely into three ions (one Ca2+\text{Ca}^{2+} and two Cl−\text{Cl}^-), you need to include the ionization factor i=3.0i = 3.0.

  3. Step 3

    Ψs=−0.01982×10=−0.198 bar\Psi_s = -0.01982 \times 10 = -0.198\text{ bar}

    Correct

    Ψs=−0.05947 MPa×10 bar/MPa≈−0.595 bar\Psi_s = -0.05947\text{ MPa} \times 10\text{ bar/MPa} \approx -0.595\text{ bar}

    Your conversion factor from megapascals to bars (1 MPa=10 bar1\text{ MPa} = 10\text{ bar}) was applied correctly, but the resulting numerical value carries over the missing factor of 3.03.0 from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass concentration from mg/L\text{mg/L} to g/L\text{g/L}.

You accurately determined the molarity (0.00800 M0.00800\text{ M}) using the given molar mass.

You correctly remembered the negative sign for solute potential.

You correctly converted megapascals to bars using the factor 10 bar/MPa10\text{ bar/MPa}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of van 't Hoff factor (i)

You treated an ionic salt (CaCl2\text{CaCl}_2) as a non-dissociating solute (i=1i = 1).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the ionization constant ii in Ψs=−iCRT\Psi_s = -iCRT. Ionic compounds dissociate in aqueous solution into multiple solute particles, each contributing colligatively to lowering the water potential.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Solute Type
  • For non-electrolytes (like sucrose or glucose), i=1i = 1. For ionic salts (like NaCl\text{NaCl} or CaCl2\text{CaCl}_2), ii equals the number of dissociated ions per formula unit.

  • Always write out the dissociation equation (e.g., CaCl2→Ca2++2Cl−\text{CaCl}_2 \rightarrow \text{Ca}^{2+} + 2\text{Cl}^-) to confirm ii before substituting values.

Equation Completeness Check
  • The standard van 't Hoff formula for solute potential is Ψs=−iCRT\Psi_s = -iCRT.

  • Double-check that all four terms (ii, CC, RR, TT) and the negative sign are written explicitly in your initial formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the ionization constant i=3.0i = 3.0 in the formula: Ψs=−iCRT\Psi_s = -iCRT.

  2. Substitute the parameters: Ψs=−(3.0)(0.0080014 mol/L)(0.00831 L⋅MPa/(mol⋅K))(298.15 K)≈−0.05947 MPa\Psi_s = -(3.0)(0.0080014\text{ mol/L})(0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}))(298.15\text{ K}) \approx -0.05947\text{ MPa}.

  3. Convert from MPa\text{MPa} to bar\text{bar}: Ψs=−0.05947 MPa×10 bar/MPa≈−0.595 bar\Psi_s = -0.05947\text{ MPa} \times 10\text{ bar/MPa} \approx -0.595\text{ bar}.

Final answer

Molarity=0.00800 M\text{Molarity} = 0.00800\text{ M}; Ψs=−0.595 bar\Psi_s = -0.595\text{ bar}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between non-electrolyte solutes (i=1i = 1) and electrolyte solutes (i>1i > 1) in water potential problems.

  • Practice identifying the van 't Hoff factor ii directly from chemical formulas such as NaCl\text{NaCl}, MgCl2\text{MgCl}_2, and Na3PO4\text{Na}_3\text{PO}_4.

OverviewACEpath Teacher's Diagnosis

03 The student divides by 10 instead of multiplying by 10 when converting MPa to bar, obtaining -0.00595 bar.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    888 mg/L=0.888 g/L  ⟹  M=0.888110.98=0.00800 M888\text{ mg/L} = 0.888\text{ g/L} \implies M = \frac{0.888}{110.98} = 0.00800\text{ M}

  2. Step 2

    Ψs=−iCRT  ⟹  Ψs=−(3.0)(0.00800)(0.00831)(298.15)=−0.0595 MPa\Psi_s = -iCRT \implies \Psi_s = -(3.0)(0.00800)(0.00831)(298.15) = -0.0595\text{ MPa}

  3. Step 3

    Ψs=−0.059510=−0.00595 bar\Psi_s = \frac{-0.0595}{10} = -0.00595\text{ bar}

    Correct

    Ψs=−0.0595 MPa×10 bar/MPa=−0.595 bar\Psi_s = -0.0595\text{ MPa} \times 10\text{ bar/MPa} = -0.595\text{ bar}

    Because 1 MPa=10 bar1\text{ MPa} = 10\text{ bar}, you must multiply by 10 bar/MPa10\text{ bar/MPa} to cancel out megapascals and convert to bars.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted mg/L\text{mg/L} to g/L\text{g/L} and determined the molarity.

You selected and executed the correct van 't Hoff equation for solute potential.

You preserved the negative sign, recognizing that solutes decrease water potential.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion inversion

Dividing by the conversion factor 1010 instead of multiplying when converting from MPa\text{MPa} to bar\text{bar}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting the dimensional conversion factor when moving from a larger pressure unit (MPa\text{MPa}) to a smaller unit (bar\text{bar}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis
  • Set up units so the given unit cancels: (value in MPa)×(10 bar1 MPa)=value in bar(\text{value in MPa}) \times \left(\frac{10\text{ bar}}{1\text{ MPa}}\right) = \text{value in bar}.

  • Always write out unit fractions to confirm that the starting unit is in the denominator before performing the arithmetic.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the solute potential in megapascals: Ψs=−0.0595 MPa\Psi_s = -0.0595\text{ MPa}.

  2. Multiply by the conversion ratio 10 bar1 MPa\frac{10\text{ bar}}{1\text{ MPa}}: Ψs=−0.0595 MPa×10 bar/MPa=−0.595 bar\Psi_s = -0.0595\text{ MPa} \times 10\text{ bar/MPa} = -0.595\text{ bar}.

Final answer

Molarity=0.00800 M\text{Molarity} = 0.00800\text{ M}; Ψs=−0.595 bar\Psi_s = -0.595\text{ bar}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting pressure values between MPa\text{MPa} and bar\text{bar} using explicit dimensional unit cancellation.

  • Remember that 1 MPa1\text{ MPa} represents a larger quantity of pressure than 1 bar1\text{ bar}, so the numerical value in bars must be 1010 times greater.

Lock it in

Similar question

01

A soil solution contains 0.020 M0.020\text{ M} sodium chloride (NaCl\text{NaCl}, i=2.0i = 2.0) at 20∘C20^\circ\text{C} (293.15 K293.15\text{ K}). Using R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}) and 1 MPa=10 bar1\text{ MPa} = 10\text{ bar}, calculate the solute potential (Ψs\Psi_s) of the soil in bar\text{bar}. Round to three significant figures.

Answer

Ψs=−iCRT=−(2.0)(0.020 M)(0.00831)(293.15 K)≈−0.0975 MPa=−0.975 bar\Psi_s = -iCRT = -(2.0)(0.020\text{ M})(0.00831)(293.15\text{ K}) \approx -0.0975\text{ MPa} = -0.975\text{ bar}.

02

A plant root cell has an internal solute potential of Ψs,root=−1.20 bar\Psi_{s,\text{root}} = -1.20\text{ bar} and a turgor pressure of Ψp,root=+0.50 bar\Psi_{p,\text{root}} = +0.50\text{ bar}. If the surrounding soil has Ψs,soil=−0.85 bar\Psi_{s,\text{soil}} = -0.85\text{ bar} and Ψp,soil=0 bar\Psi_{p,\text{soil}} = 0\text{ bar}, determine the direction of net water movement between soil and root.

Answer

Total root potential: Ψroot=−1.20+0.50=−0.70 bar\Psi_{\text{root}} = -1.20 + 0.50 = -0.70\text{ bar}. Total soil potential: Ψsoil=−0.85+0=−0.85 bar\Psi_{\text{soil}} = -0.85 + 0 = -0.85\text{ bar}. Water moves from higher to lower potential: from root (−0.70 bar-0.70\text{ bar}) to soil (−0.85 bar-0.85\text{ bar}), causing root dehydration.

03

A fertilizer runoff accident elevates the soil potassium sulfate (K2SO4\text{K}_2\text{SO}_4, molar mass 174.26 g/mol174.26\text{ g/mol}, i=3.0i = 3.0) concentration to 3.485 g/L3.485\text{ g/L} at 25∘C25^\circ\text{C} (298.15 K298.15\text{ K}). Using R=0.00831 L⋅MPa/(mol⋅K)R = 0.00831\text{ L}\cdot\text{MPa}/(\text{mol}\cdot\text{K}) and 1 MPa=10 bar1\text{ MPa} = 10\text{ bar}, calculate the molarity and solute potential (Ψs\Psi_s) of this runoff in bar\text{bar}.

Answer

Molarity: C=3.485 g/L174.26 g/mol=0.0200 MC = \frac{3.485\text{ g/L}}{174.26\text{ g/mol}} = 0.0200\text{ M}. Solute potential: Ψs=−iCRT=−(3.0)(0.0200 M)(0.00831)(298.15 K)=−0.1486 MPa=−1.49 bar\Psi_s = -iCRT = -(3.0)(0.0200\text{ M})(0.00831)(298.15\text{ K}) = -0.1486\text{ MPa} = -1.49\text{ bar}.

Loading workspace…