Resources

Two loci, RR and SS, are located 120.0 cM120.0\text{ cM} apart on a very long eukaryotic chromosome such that the mean number of chiasmata (crossover events) occurring between them per meiotic tetrad is m=2.40m = 2.40. Using Haldane's mapping function r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m}) to account for multiple non-interfering crossover events: (a) Calculate the expected observed recombination frequency rr. (b) What asymptotic value does rr approach as m→∞m \to \infty, and why?

Answer and steps

Final answer

(a) r=12(1−e−2.40)=12(1−0.09072)=0.455r = \frac{1}{2}(1 - e^{-2.40}) = \frac{1}{2}(1 - 0.09072) = 0.455 (or 45.5%45.5\%); (b) As m→∞m \to \infty, e−m→0e^{-m} \to 0, so r→0.500r \to 0.500 (50.0%50.0\%), because repeated random exchanges fully randomize the non-sister chromatid associations.

Steps

Part (a): Calculating the Observed Recombination Frequency

  1. Identify the mapping function: Haldane's mapping function accounts for multiple crossover events occurring without interference across a chromosome interval: r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m}) where:

    • mm is the mean number of crossover events per tetrad (m=2.40m = 2.40).
    • rr is the observed recombination frequency.
  2. Substitute the given value and calculate: e−2.40≈0.09072e^{-2.40} \approx 0.09072 1−e−2.40≈1−0.09072=0.909281 - e^{-2.40} \approx 1 - 0.09072 = 0.90928 r=12(0.90928)≈0.455 or 45.5%r = \frac{1}{2}(0.90928) \approx 0.455 \text{ or } 45.5\%

Part (b): Asymptotic Behavior and Biological Mechanism

  1. Mathematical limit: As the genetic distance between loci becomes very large, the average number of crossovers increases toward infinity (m→∞m \to \infty). Since lim⁡m→∞e−m=0\lim_{m \to \infty} e^{-m} = 0, we find: lim⁡m→∞r=12(1−0)=0.500 (or 50.0%)\lim_{m \to \infty} r = \frac{1}{2}(1 - 0) = 0.500 \text{ (or } 50.0\%)
  2. Biological explanation:

    • In each crossover event, exchange takes place randomly between two non-sister chromatids out of the four in a meiotic tetrad, resulting in 50%50\% recombinant chromatids and 50%50\% non-recombinant chromatids for that specific exchange.
    • As the number of non-interfering crossovers (mm) increases, multiple exchanges (such as double, triple, and higher-order crossovers) occur. Double crossovers can restore the parental allele combination on chromatids, canceling out the observable effect of recombination.
    • In the limit of infinitely many crossovers, the alleles at loci RR and SS become completely randomized across the chromatids. This yields an equal proportion of parental and recombinant gametes, indistinguishable from independent assortment (50%50\% recombination frequency).

Common Pitfall: Do not confuse map distance with recombination frequency. Map distance is additive and can exceed 50 cM50\text{ cM} (here, 120.0 cM120.0\text{ cM}), but the observed recombination frequency rr can never exceed 50%50\% (0.500.50) due to the restorative effect of multiple crossovers.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student substitutes the genetic map distance in cM directly for m instead of using the provided mean crossover frequency m = 2.40.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r=12(1−e−m)  ⟹  r=12(1−e−120.0)  ⟹  r=12(1−0)=0.500r = \frac{1}{2}(1 - e^{-m}) \implies r = \frac{1}{2}(1 - e^{-120.0}) \implies r = \frac{1}{2}(1 - 0) = 0.500

    Correct

    r=12(1−e−2.40)=12(1−0.09072)≈0.455r = \frac{1}{2}(1 - e^{-2.40}) = \frac{1}{2}(1 - 0.09072) \approx 0.455

    You substituted the genetic map distance of 120.0 cM120.0\text{ cM} into the exponent instead of the mean crossover value per tetrad, which was given as m=2.40m = 2.40 (or map distance in Morgans d=m2=1.20 Md = \frac{m}{2} = 1.20\text{ M}).

  2. Step 2

    As \text{As } m →\to ∞\infty, e^{-m} →\to 0   ⟹  \implies r →\to 12\frac{1}{2}(1 - 0) = 0.5   ⟹  \implies Multiple crossovers randomize chromatid combinations so half of gametes are recombinant.\text{Multiple crossovers randomize chromatid combinations so half of gametes are recombinant.}

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct Haldane mapping formula.

You correctly evaluated the limit lim⁡m→∞r=0.500\lim_{m \to \infty} r = 0.500.

You provided an accurate biological justification based on the randomizing effect of multiple crossover events.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable confusion: centimorgans vs. mean crossover frequency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the map distance in centimorgans (120.0) as the parameter m in Haldane's formula. In the formula r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m}), mm represents the average number of crossovers per tetrad. If using map distance dd in Morgans, the formula is r=12(1−e−2d)r = \frac{1}{2}(1 - e^{-2d}), where d=120.0 cM=1.20 Md = 120.0\text{ cM} = 1.20\text{ M}, yielding the exact same exponent of −2(1.20)=−2.40-2(1.20) = -2.40.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying m vs. d in Haldane's mapping function
  • In r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m}), mm is the mean number of chiasmata per tetrad. Alternatively, r=12(1−e−2d)r = \frac{1}{2}(1 - e^{-2d}), where dd is map distance in Morgans (1 Morgan=100 cM=m21\text{ Morgan} = 100\text{ cM} = \frac{m}{2}).

  • Always check whether the exponent requires the crossover number mm or genetic distance dd, and convert centimorgans to Morgans if using dd.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the mean crossover frequency given in the problem: m=2.40m = 2.40.

  2. Substitute m=2.40m = 2.40 into Haldane's formula: r=12(1−e−2.40)r = \frac{1}{2}(1 - e^{-2.40}).

  3. Calculate e−2.40≈0.09072e^{-2.40} \approx 0.09072.

  4. Evaluate r=12(1−0.09072)=12(0.90928)≈0.455r = \frac{1}{2}(1 - 0.09072) = \frac{1}{2}(0.90928) \approx 0.455 (or 45.5%45.5\%).

Final answer

(a) r≈0.455r \approx 0.455 (or 45.5%45.5\%); (b) r→0.500r \to 0.500 (50.0%50.0\%), because repeated crossovers fully randomize non-sister chromatid associations.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting between genetic distance in centimorgans (cM), Morgans (M), and mean chiasmata per tetrad (mm).

  • Solve mapping function problems using both forms: r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m}) and r=12(1−e−2d)r = \frac{1}{2}(1 - e^{-2d}) to build familiarity.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 1/2 in Haldane's mapping function, calculating the probability of at least one crossover rather than the recombination fraction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=1−e(−m)  ⟹  r=1−e(−2.40)  ⟹  r=1−0.0907=0.909r = 1 - e^{(-m)} \implies r = 1 - e^{(-2.40)} \implies r = 1 - 0.0907 = 0.909

    Correct

    r=12(1−e−m)  ⟹  r=12(1−e−2.40)=12(1−0.09072)≈0.455 (or 45.5%)r = \frac{1}{2}(1 - e^{-m}) \implies r = \frac{1}{2}(1 - e^{-2.40}) = \frac{1}{2}(1 - 0.09072) \approx 0.455 \text{ (or } 45.5\%\text{)}

    You calculated 1−e−m1 - e^{-m}, which represents the probability that a meiotic tetrad experiences at least one crossover (P(≥1)P(\ge 1)). However, because each crossover event involves only two of the four chromatids, tetrads with crossovers yield on average 50%50\% recombinant gametes, requiring the factor of 12\frac{1}{2}.

  2. Step 2

    As m→∞,e(−m)→0, so r approaches 1.0 (or 100%). With infinite crossovers, every single tetrad undergoes recombination between the loci.\text{As } m \to \infty, e^{(-m)} \to 0, \text{ so } r \text{ approaches } 1.0 \text{ (or } 100\%). \text{ With infinite crossovers, every single tetrad undergoes recombination between the loci.}

    Correct

    As m→∞,e−m→0, so r→12(1−0)=0.500 (or 50.0%). Repeated crossovers randomize chromatid combinations, producing 50% recombinant and 50% parental gametes.\text{As } m \to \infty, e^{-m} \to 0, \text{ so } r \to \frac{1}{2}(1 - 0) = 0.500 \text{ (or } 50.0\%). \text{ Repeated crossovers randomize chromatid combinations, producing } 50\% \text{ recombinant and } 50\% \text{ parental gametes.}

    Even if every tetrad undergoes multiple crossovers, double crossovers restore parental allele combinations on recombinant chromatids. As the number of exchanges grows indefinitely, chromatid combinations are completely randomized, approaching an upper limit of 50%50\% (0.5000.500), not 100%100\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that m=2.40m = 2.40 is the mean number of crossovers per tetrad.

You calculated the value of e−2.40≈0.0907e^{-2.40} \approx 0.0907 with high arithmetic accuracy.

You correctly identified that e−m→0e^{-m} \to 0 as m→∞m \to \infty.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of the 1/2 factor in Haldane's mapping function

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the probability of a tetrad undergoing at least one crossover event (1−e−m1 - e^{-m}) with the proportion of recombinant gametes produced (r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m})), forgetting that a crossover only involves two non-sister chromatids out of four and that multiple crossovers randomize alleles toward a 50% cap.

REASONING PATH
Your ACEpath teacher’s suggested approach
Tetrad vs. Chromatid Recombination
  • Each single crossover event in a 4-strand meiotic tetrad involves only two non-sister chromatids, producing 2 recombinant and 2 parental chromatids (50%50\% recombinant).

  • Always multiply the tetrad exchange fraction by 12\frac{1}{2} to find the observed gametic recombination frequency rr.

Theoretical Maximum for Recombination Frequency
  • Observed recombination frequency between any two loci on the same chromosome cannot exceed 50%50\% (0.500.50), because multiple crossovers randomize chromatids equally between parental and recombinant types.

  • Check your final rr: if r>0.50r > 0.50, review your formula for a missing 12\frac{1}{2} or a confusion between map distance (dd) and observed recombination fraction (rr).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write Haldane's mapping function with the required factor: r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m})

  2. Substitute m=2.40m = 2.40: r=12(1−e−2.40)=12(1−0.09072)=12(0.90928)≈0.455r = \frac{1}{2}(1 - e^{-2.40}) = \frac{1}{2}(1 - 0.09072) = \frac{1}{2}(0.90928) \approx 0.455

  3. Evaluate the limit as m→∞m \to \infty: lim⁡m→∞r=12(1−0)=0.500 (or 50.0%)\lim_{m \to \infty} r = \frac{1}{2}(1 - 0) = 0.500 \text{ (or } 50.0\%\text{)}

  4. Explain biologically: Multiple crossovers randomly swap alleles among the four chromatids, resulting in an equal 50:5050:50 distribution of parental and recombinant gametes.

Final answer

(a) r=0.455r = 0.455 (or 45.5%45.5\%); (b) rr approaches 0.5000.500 (50.0%50.0\%) because multiple crossover events continually interchange non-sister chromatids, fully randomizing alleles between loci to mimic independent assortment.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing between tetrad crossover frequency and gamete recombination frequency.

  • Review why map distance in centimorgans can exceed 50 cM50\text{ cM} while observed recombination frequency rr is capped at 50%50\%.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the negative exponent in e^(-m) as -e^m or fails to evaluate e^(-2.40) properly, subtracting a negative term.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r=12(1−e−2.40)r = \frac{1}{2}(1 - e^{-2.40})

  2. Step 2

    e−2.40=−11.02e^{-2.40} = -11.02

    Correct

    e−2.40=1e2.40≈0.0907e^{-2.40} = \frac{1}{e^{2.40}} \approx 0.0907

    A negative exponent denotes a reciprocal rather than a negative value (e−x=1exe^{-x} = \frac{1}{e^x}); because e2.40≈11.02e^{2.40} \approx 11.02, e−2.40≈111.02≈0.0907e^{-2.40} \approx \frac{1}{11.02} \approx 0.0907.

  3. Step 3

    r=12(1−(−11.02))=12(12.02)=6.01r = \frac{1}{2}(1 - (-11.02)) = \frac{1}{2}(12.02) = 6.01

    Correct

    r=12(1−0.0907)=12(0.9093)≈0.455r = \frac{1}{2}(1 - 0.0907) = \frac{1}{2}(0.9093) \approx 0.455 (or 45.5%45.5\%)

    You correctly carried out arithmetic using your value from the previous line, but the result r=6.01r = 6.01 is impossible because recombination frequency is a probability and can never exceed 0.500.50.

  4. Step 4

    As m→∞m \to \infty, e−m→0e^{-m} \to 0, so rr approaches 12\frac{1}{2} (or 50%50\%). Repeated crossing over randomizes allele combinations so recombinant and parental gametes are equally frequent.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Haldane's mapping formula for non-interfering crossovers.

You accurately identified the mathematical limit of rr as m→∞m \to \infty.

You clearly explained the biological mechanism of allele randomization due to multiple crossover events.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Negative Exponent Property Error

Evaluating e−2.40e^{-2.40} as −11.02-11.02 rather than ≈0.0907\approx 0.0907.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused a negative power in the exponent with a negative multiplier out front, treating e−xe^{-x} as −ex-e^x instead of 1ex\frac{1}{e^x}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Negative Exponent Rule
  • For any base b>0b > 0 and real power xx, b−x=1bx>0b^{-x} = \frac{1}{b^x} > 0. An exponential function with a positive base can never produce a negative number.

  • Whenever you encounter e−xe^{-x}, compute 1ex\frac{1}{e^x} and check that the value lies strictly between 00 and 11 for positive xx.

Recombination Frequency Upper Bound
  • Observed recombination frequency rr represents the proportion of recombinant gametes and is bounded by 0≤r≤0.500 \le r \le 0.50 (or 0%0\% to 50%50\%).

  • If a calculated recombination frequency exceeds 0.500.50, pause immediately and check your arithmetic and formula setup.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. e−2.40=1e2.40≈111.023≈0.09072e^{-2.40} = \frac{1}{e^{2.40}} \approx \frac{1}{11.023} \approx 0.09072

  2. 1−e−2.40≈1−0.09072=0.909281 - e^{-2.40} \approx 1 - 0.09072 = 0.90928

  3. r=12(0.90928)≈0.455r = \frac{1}{2}(0.90928) \approx 0.455 (or 45.5%45.5\%)

Final answer

(a) r≈0.455r \approx 0.455 (or 45.5%45.5\%); (b) As m→∞m \to \infty, e−m→0e^{-m} \to 0, so r→0.500r \to 0.500 (50.0%50.0\%) because multiple crossovers randomize allele combinations.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review basic exponent rules, focusing specifically on reciprocal powers a−n=1ana^{-n} = \frac{1}{a^n}.

  • Use the theoretical maximum of r=0.50r = 0.50 as an automatic sanity check for any linkage mapping problem.

  • Practice computing Haldane and Kosambi mapping function values for different mean crossover values.

Lock it in

Similar question

01

Two loci are separated by an average of m=0.80m = 0.80 crossovers per tetrad. Using Haldane's formula r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m}), calculate the observed recombination frequency rr. (Use e−0.80≈0.4493e^{-0.80} \approx 0.4493)

Answer

r=12(1−0.4493)=12(0.5507)≈0.275r = \frac{1}{2}(1 - 0.4493) = \frac{1}{2}(0.5507) \approx 0.275 (or 27.5%27.5\%).

02

A genetic map indicates that two loci are 60.0 cM60.0\text{ cM} apart. (a) Express this distance in Morgans (dd). (b) Find the mean number of chiasmata (mm). (c) Compute the observed recombination frequency rr using Haldane's mapping function. (Use e−1.20≈0.3012e^{-1.20} \approx 0.3012)

Answer

(a) d=0.600 Md = 0.600\text{ M}. (b) m=2d=1.20m = 2d = 1.20. (c) r=12(1−e−1.20)=12(1−0.3012)≈0.349r = \frac{1}{2}(1 - e^{-1.20}) = \frac{1}{2}(1 - 0.3012) \approx 0.349 (or 34.9%34.9\%).

03

An observed recombination frequency between two genes is r=0.40r = 0.40. Assuming no crossover interference, invert Haldane's formula r=12(1−e−m)r = \frac{1}{2}(1 - e^{-m}) to find: (a) the mean number of crossovers mm, and (b) the map distance in cM. (Use ln⁡(0.20)≈−1.609\ln(0.20) \approx -1.609)

Answer

(a) 1−2r=e−m  ⟹  1−0.80=0.20=e−m  ⟹  m=−ln⁡(0.20)≈1.6091 - 2r = e^{-m} \implies 1 - 0.80 = 0.20 = e^{-m} \implies m = -\ln(0.20) \approx 1.609. (b) Map distance d=m2×100=1.6092×100≈80.5 cMd = \frac{m}{2} \times 100 = \frac{1.609}{2} \times 100 \approx 80.5\text{ cM}.

Loading workspace…