Resources

In a clinical study tracking an emerging multidrug-resistant strain of Klebsiella pneumoniae\textit{Klebsiella pneumoniae}, a liquid culture initially containing N0=4.00×104 CFU/mLN_0 = 4.00 \times 10^4\text{ CFU/mL} resistant bacteria was treated with an experimental carbapenem adjunct. After continuous exposure for t=12.0 hourst = 12.0\text{ hours}, the viable bacterial density dropped to N(t)=1.25×102 CFU/mLN(t) = 1.25 \times 10^2\text{ CFU/mL}. Assuming net bacterial clearance follows first-order kinetics N(t)=N0e−knettN(t) = N_0 e^{-k_{\text{net}} t}, determine: (a) the net specific killing rate constant knetk_{\text{net}} in units of h−1\text{h}^{-1}, and (b) the biological half-life t1/2t_{1/2} of the bacterial population under this treatment.

Answer and steps

Final answer

(a) knet=0.481 h−1k_{\text{net}} = 0.481\text{ h}^{-1}; (b) t1/2=1.44 hourst_{1/2} = 1.44\text{ hours}.

Steps

Part (a): Determining the Net Specific Killing Rate Constant (knetk_{\text{net}})

The decline of the viable bacterial population under the experimental antibiotic treatment is modeled by first-order decay kinetics:

N(t)=N0e−knettN(t) = N_0 e^{-k_{\text{net}} t}

where:

  • N0=4.00×104 CFU/mLN_0 = 4.00 \times 10^4\text{ CFU/mL} is the initial bacterial concentration.
  • N(t)=1.25×102 CFU/mLN(t) = 1.25 \times 10^2\text{ CFU/mL} is the surviving bacterial concentration at time tt.
  • t=12.0 hourst = 12.0\text{ hours} is the exposure duration.
  • knetk_{\text{net}} is the net specific killing rate constant in h−1\text{h}^{-1}.
  1. Isolate the exponential term: N(t)N0=e−knett\frac{N(t)}{N_0} = e^{-k_{\text{net}} t}

    Substitute the given values into the ratio: 1.25×102 CFU/mL4.00×104 CFU/mL=12540000=1320=3.125×10−3\frac{1.25 \times 10^2\text{ CFU/mL}}{4.00 \times 10^4\text{ CFU/mL}} = \frac{125}{40000} = \frac{1}{320} = 3.125 \times 10^{-3}

  2. Take the natural logarithm (ln⁡\ln) of both sides: ln⁡(N(t)N0)=−knett\ln\left(\frac{N(t)}{N_0}\right) = -k_{\text{net}} t

    ln⁡(1320)=−ln⁡(320)=−knett\ln\left(\frac{1}{320}\right) = -\ln(320) = -k_{\text{net}} t

  3. Solve for knetk_{\text{net}}: knet=ln⁡(320)t=5.7683212.0 h≈0.48069 h−1k_{\text{net}} = \frac{\ln(320)}{t} = \frac{5.76832}{12.0\text{ h}} \approx 0.48069\text{ h}^{-1}

Rounding to three significant figures gives: knet=0.481 h−1k_{\text{net}} = 0.481\text{ h}^{-1}


Part (b): Calculating the Biological Half-Life (t1/2t_{1/2})

The half-life represents the time required for the viable bacterial density to decrease to half of its current value (N(t1/2)=12N0N(t_{1/2}) = \frac{1}{2}N_0).

  1. Relate half-life to the first-order rate constant: 12=e−knett1/2  ⟹  ln⁡(2)=knett1/2\frac{1}{2} = e^{-k_{\text{net}} t_{1/2}} \implies \ln(2) = k_{\text{net}} t_{1/2}

    t1/2=ln⁡(2)knett_{1/2} = \frac{\ln(2)}{k_{\text{net}}}

  2. Substitute knetk_{\text{net}}: t1/2=0.693150.48069 h−1≈1.442 hourst_{1/2} = \frac{0.69315}{0.48069\text{ h}^{-1}} \approx 1.442\text{ hours}

Rounding to three significant figures yields: t1/2=1.44 hourst_{1/2} = 1.44\text{ hours}


Common Pitfalls to Avoid

  • Logarithm Base: Use the natural logarithm (ln⁡\ln, base ee) rather than the common logarithm (log⁡10\log_{10}, base 10), as the model is formulated with the exponential base ee.
  • Premature Rounding: Keep unrounded intermediate values (such as knet≈0.48069 h−1k_{\text{net}} \approx 0.48069\text{ h}^{-1}) when computing t1/2t_{1/2} to avoid compounding rounding errors.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio of initial and final concentrations when taking the natural logarithm, resulting in a negative killing rate constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N(t)=N0e−knett  ⟹  ln⁡(N(t)N0)=−knettN(t) = N_0 e^{-k_{\text{net}} t} \implies \ln\left(\frac{N(t)}{N_0}\right) = -k_{\text{net}} t

  2. Step 2

    knet=(112.0)ln⁡(1.25×1024.00×104)  ⟹  knet=(112.0)ln⁡(0.003125)  ⟹  knet=−0.481 h−1k_{\text{net}} = \left(\frac{1}{12.0}\right) \ln\left(\frac{1.25 \times 10^2}{4.00 \times 10^4}\right) \implies k_{\text{net}} = \left(\frac{1}{12.0}\right) \ln(0.003125) \implies k_{\text{net}} = -0.481\text{ h}^{-1}

    Correct

    knet=−1tln⁡(N(t)N0)=112.0 hln⁡(4.00×1041.25×102)=0.481 h−1k_{\text{net}} = -\frac{1}{t}\ln\left(\frac{N(t)}{N_0}\right) = \frac{1}{12.0\text{ h}}\ln\left(\frac{4.00 \times 10^4}{1.25 \times 10^2}\right) = 0.481\text{ h}^{-1}

    When solving ln⁡(N(t)/N0)=−knett\ln(N(t)/N_0) = -k_{\text{net}} t for knetk_{\text{net}}, dividing by −t-t introduces a negative sign, giving knet=−1tln⁡(N(t)/N0)=1tln⁡(N0/N(t))k_{\text{net}} = -\frac{1}{t}\ln(N(t)/N_0) = \frac{1}{t}\ln(N_0/N(t)). You omitted the negative sign on the right-hand side, resulting in a negative rate constant.

  3. Step 3

    t1/2=ln⁡(2)knett_{1/2} = \frac{\ln(2)}{k_{\text{net}}}

  4. Step 4

    t1/2=0.693(−0.481)  ⟹  t1/2=−1.44 ht_{1/2} = \frac{0.693}{(-0.481)} \implies t_{1/2} = -1.44\text{ h}

    Correct

    t1/2=ln⁡(2)0.481 h−1≈1.44 ht_{1/2} = \frac{\ln(2)}{0.481\text{ h}^{-1}} \approx 1.44\text{ h}

    Your half-life calculation followed the correct formula, but substituting your negative rate constant propagated into a physically impossible negative half-life.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated the first-order clearance kinetic model.

You took the natural logarithm correctly on both sides of the ratio.

You stated the correct mathematical relationship between rate constant and half-life.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error When Isolating Decay Constant

You dropped the leading negative sign when dividing both sides by −t-t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You lost track of the minus sign attached to −knett-k_{\text{net}}t during algebraic isolation, overlooking that because N(t)N0<1\frac{N(t)}{N_0} < 1, its logarithm is already negative and requires the exterior minus sign to yield a positive rate constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Decay Rate Constant
  • ln⁡(N/N0)=−kt  ⟹  k=−1tln⁡(NN0)=1tln⁡(N0N)\ln(N/N_0) = -kt \implies k = -\frac{1}{t}\ln\left(\frac{N}{N_0}\right) = \frac{1}{t}\ln\left(\frac{N_0}{N}\right)

  • Always flip the fraction inside the logarithm, ln⁡(N0/N(t))\ln(N_0/N(t)), to guarantee a positive argument greater than 11.

Physical Sanity Check
  • Rate constants and elapsed half-lives must always be positive values (k>0k > 0, t1/2>0t_{1/2} > 0).

  • If your calculated rate constant or half-life is negative, pause immediately to check for a dropped negative sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. knet=−1tln⁡(N(t)N0)=112.0 hln⁡(4.00×1041.25×102)=ln⁡(320)12.0 h≈0.481 h−1k_{\text{net}} = -\frac{1}{t} \ln\left(\frac{N(t)}{N_0}\right) = \frac{1}{12.0\text{ h}} \ln\left(\frac{4.00 \times 10^4}{1.25 \times 10^2}\right) = \frac{\ln(320)}{12.0\text{ h}} \approx 0.481\text{ h}^{-1}

  2. t1/2=ln⁡(2)knet=0.693150.48069 h−1≈1.44 hourst_{1/2} = \frac{\ln(2)}{k_{\text{net}}} = \frac{0.69315}{0.48069\text{ h}^{-1}} \approx 1.44\text{ hours}

Final answer

(a) knet=0.481 h−1k_{\text{net}} = 0.481\text{ h}^{-1}; (b) t1/2=1.44 hourst_{1/2} = 1.44\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Rewrite decay equations as k=1tln⁡(N0/N(t))k = \frac{1}{t}\ln(N_0/N(t)) to keep the ratio greater than 11 and prevent sign errors.

  • Perform a quick physical reality check on all kinetic parameters: rate constants and half-lives must be strictly positive.

OverviewACEpath Teacher's Diagnosis

02 The student uses common logarithm (log₁₀) instead of the natural logarithm (ln) for first-order exponential decay.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N(t)=N0e−knett  ⟹  knet=(1t)log⁡10(N0N(t))N(t) = N_0 e^{-k_{\text{net}} t} \implies k_{\text{net}} = \left(\frac{1}{t}\right) \log_{10}\left(\frac{N_0}{N(t)}\right)

    Correct

    N(t)=N0e−knett  ⟹  knet=1tln⁡(N0N(t))N(t) = N_0 e^{-k_{\text{net}} t} \implies k_{\text{net}} = \frac{1}{t} \ln\left(\frac{N_0}{N(t)}\right)

    You used the common logarithm (log⁡10\log_{10}) instead of the natural logarithm (ln⁡\ln). Because the decay model is governed by the base ee exponential function e−knette^{-k_{\text{net}} t}, you must take the natural logarithm of both sides to isolate knetk_{\text{net}}: ln⁡(N(t)N0)=−knett\ln\left(\frac{N(t)}{N_0}\right) = -k_{\text{net}} t.

  2. Step 2

    knet=(112.0)log⁡10(4.00×1041.25×102)  ⟹  knet=(112.0)log⁡10(320)  ⟹  knet=2.50512.0=0.209 h−1k_{\text{net}} = \left(\frac{1}{12.0}\right) \log_{10}\left(\frac{4.00 \times 10^4}{1.25 \times 10^2}\right) \implies k_{\text{net}} = \left(\frac{1}{12.0}\right) \log_{10}(320) \implies k_{\text{net}} = \frac{2.505}{12.0} = 0.209\text{ h}^{-1}

    Correct

    knet=112.0 hln⁡(4.00×1041.25×102)=ln⁡(320)12.0 h≈0.481 h−1k_{\text{net}} = \frac{1}{12.0\text{ h}} \ln\left(\frac{4.00 \times 10^4}{1.25 \times 10^2}\right) = \frac{\ln(320)}{12.0\text{ h}} \approx 0.481\text{ h}^{-1}

    You evaluated the arithmetic correctly for your written expression, but the numerical result is affected by evaluating log⁡10(320)\log_{10}(320) instead of ln⁡(320)\ln(320).

  3. Step 3

    t1/2=ln⁡(2)knet  ⟹  t1/2=0.6930.209  ⟹  t1/2=3.32 ht_{1/2} = \frac{\ln(2)}{k_{\text{net}}} \implies t_{1/2} = \frac{0.693}{0.209} \implies t_{1/2} = 3.32\text{ h}

    Correct

    t1/2=ln⁡(2)knet=0.693150.48069 h−1≈1.44 hourst_{1/2} = \frac{\ln(2)}{k_{\text{net}}} = \frac{0.69315}{0.48069\text{ h}^{-1}} \approx 1.44\text{ hours}

    You correctly selected the relationship t1/2=ln⁡(2)knett_{1/2} = \frac{\ln(2)}{k_{\text{net}}}, but your final numerical answer was affected by substituting the incorrect rate constant from Part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the governing first-order clearance equation N(t)=N0e−knettN(t) = N_0 e^{-k_{\text{net}} t}.

You correctly evaluated the numerical concentration ratio N0N(t)=4.00×1041.25×102=320\frac{N_0}{N(t)} = \frac{4.00 \times 10^4}{1.25 \times 10^2} = 320.

You correctly applied the first-order half-life formula t1/2=ln⁡(2)knett_{1/2} = \frac{\ln(2)}{k_{\text{net}}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm Base Confusion

You took the common logarithm (log⁡10\log_{10}) rather than the natural logarithm (ln⁡\ln) when inverting the natural exponential function e−knette^{-k_{\text{net}} t}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing common logarithms (log⁡10\log_{10}) with natural logarithms (ln⁡\ln) when solving exponential decay equations formulated with base ee. Because ln⁡(ex)=x\ln(e^x) = x while log⁡10(ex)=xlog⁡10(e)≈0.4343x\log_{10}(e^x) = x \log_{10}(e) \approx 0.4343 x, using log⁡10\log_{10} underestimates the rate constant by a factor of ln⁡(10)≈2.303\ln(10) \approx 2.303.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match the logarithm base to the exponential base
  • To invert an exponential term bub^u, always apply the logarithm of the same base bb: log⁡b(bu)=u\log_b(b^u) = u. For the natural exponential e−kte^{-kt}, the correct inverse is ln⁡(e−kt)=−kt\ln(e^{-kt}) = -kt.

  • Whenever an equation contains e±kte^{\pm kt}, immediately take the natural logarithm (ln⁡\ln) of both sides.

Maintain consistency in half-life derivation
  • The standard half-life expression t1/2=ln⁡(2)kt_{1/2} = \frac{\ln(2)}{k} comes directly from e−kt1/2=0.5  ⟹  −kt1/2=ln⁡(0.5)=−ln⁡(2)e^{-k t_{1/2}} = 0.5 \implies -k t_{1/2} = \ln(0.5) = -\ln(2).

  • Ensure that the rate constant kk substituted into t1/2=ln⁡(2)kt_{1/2} = \frac{\ln(2)}{k} was obtained using natural logarithms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Isolate the ratio and apply the natural logarithm: ln⁡(N(t)N0)=ln⁡(e−knett)=−knett\ln\left(\frac{N(t)}{N_0}\right) = \ln\left(e^{-k_{\text{net}} t}\right) = -k_{\text{net}} t, which yields knet=ln⁡(N0/N(t))tk_{\text{net}} = \frac{\ln(N_0 / N(t))}{t}.

  2. Substitute the given values into the natural logarithm expression: knet=ln⁡(320)12.0 h=5.7683212.0 h≈0.481 h−1k_{\text{net}} = \frac{\ln(320)}{12.0\text{ h}} = \frac{5.76832}{12.0\text{ h}} \approx 0.481\text{ h}^{-1}.

  3. Compute the biological half-life using the corrected rate constant: t1/2=ln⁡(2)0.48069 h−1=0.693150.48069 h−1≈1.44 hourst_{1/2} = \frac{\ln(2)}{0.48069\text{ h}^{-1}} = \frac{0.69315}{0.48069\text{ h}^{-1}} \approx 1.44\text{ hours}.

Final answer

(a) knet=0.481 h−1k_{\text{net}} = 0.481\text{ h}^{-1}; (b) t1/2=1.44 hourst_{1/2} = 1.44\text{ hours}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the inverse relationship between the natural exponential function exe^x and the natural logarithm ln⁡(x)\ln(x).

  • Practice solving first-order pharmacokinetics decay problems specifically checking that all logarithmic transformations use ln⁡\ln instead of log⁡10\log_{10}.

OverviewACEpath Teacher's Diagnosis

03 The student misremembers the half-life formula as t₁/₂ = 1 / (2 k_net) instead of ln(2) / k_net.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    knet=1tln⁡(N0N(t))  ⟹  knet=112.0ln⁡(4.00×1041.25×102)  ⟹  knet=(112.0)ln⁡(320)=5.76812.0=0.481 h−1k_{\text{net}} = \frac{1}{t} \ln\left(\frac{N_0}{N(t)}\right) \implies k_{\text{net}} = \frac{1}{12.0} \ln\left(\frac{4.00 \times 10^4}{1.25 \times 10^2}\right) \implies k_{\text{net}} = \left(\frac{1}{12.0}\right)\ln(320) = \frac{5.768}{12.0} = 0.481\text{ h}^{-1}

  2. Step 2

    t1/2=12knet  ⟹  t1/2=12×0.481=10.962=1.04 ht_{1/2} = \frac{1}{2 k_{\text{net}}} \implies t_{1/2} = \frac{1}{2 \times 0.481} = \frac{1}{0.962} = 1.04\text{ h}

    Correct

    t1/2=ln⁡(2)knet=0.693150.48069 h−1≈1.44 ht_{1/2} = \frac{\ln(2)}{k_{\text{net}}} = \frac{0.69315}{0.48069\text{ h}^{-1}} \approx 1.44\text{ h}

    You substituted into an incorrect algebraic form t1/2=12knett_{1/2} = \frac{1}{2 k_{\text{net}}}. Because the process is governed by exponential decay (e−knett1/2=0.5e^{-k_{\text{net}} t_{1/2}} = 0.5), taking the natural logarithm yields ln⁡(2)=knett1/2\ln(2) = k_{\text{net}} t_{1/2}, which means the numerator must be ln⁡(2)≈0.693\ln(2) \approx 0.693, not 12\frac{1}{2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the first-order clearance equation and rearranged it to isolate knetk_{\text{net}}.

You accurately simplified the ratio N0N(t)=320\frac{N_0}{N(t)} = 320 and computed the natural log to obtain knet=0.481 h−1k_{\text{net}} = 0.481\text{ h}^{-1} with correct units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula recall error

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated a linear fractional factor with an exponential decay exponent, writing 12k\frac{1}{2 k} instead of deriving half-life from e−kt1/2=12e^{-k t_{1/2}} = \frac{1}{2}, which requires the natural logarithm ln⁡(2)\ln(2) in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
First-Order Half-Life Derivation
  • For any process following first-order kinetics N(t)=N0e−ktN(t) = N_0 e^{-k t}, set N(t1/2)=12N0N(t_{1/2}) = \frac{1}{2} N_0, giving e−kt1/2=12  ⟹  −kt1/2=ln⁡(12)=−ln⁡(2)e^{-k t_{1/2}} = \frac{1}{2} \implies -k t_{1/2} = \ln\left(\frac{1}{2}\right) = -\ln(2).

  • Always recall or derive t1/2=ln⁡(2)k≈0.693kt_{1/2} = \frac{\ln(2)}{k} \approx \frac{0.693}{k} whenever working with exponential decay.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the half-life definition from the first-order equation: e−knett1/2=0.5e^{-k_{\text{net}} t_{1/2}} = 0.5

  2. Take the natural logarithm of both sides: −knett1/2=−ln⁡(2)  ⟹  t1/2=ln⁡(2)knet-k_{\text{net}} t_{1/2} = -\ln(2) \implies t_{1/2} = \frac{\ln(2)}{k_{\text{net}}}

  3. Substitute the rate constant: t1/2=0.693150.48069 h−1≈1.442 ht_{1/2} = \frac{0.69315}{0.48069\text{ h}^{-1}} \approx 1.442\text{ h}

Final answer

(a) knet=0.481 h−1k_{\text{net}} = 0.481\text{ h}^{-1}; (b) t1/2=1.44 ht_{1/2} = 1.44\text{ h}

NEXT STEPS
Final Takeaways from Your Teacher
  • Commit the relationship t1/2=ln⁡(2)kt_{1/2} = \frac{\ln(2)}{k} to memory for all first-order chemical, biological, and nuclear rate laws.

  • Practice deriving t1/2t_{1/2} from scratch by setting N(t)=0.5N0N(t) = 0.5 N_0 whenever you feel unsure about the numerator.

Lock it in

Similar question

01

A resistant strain of Pseudomonas aeruginosa\textit{Pseudomonas aeruginosa} is exposed to colistin. The viable cell density drops from N0=8.00×105 CFU/mLN_0 = 8.00 \times 10^5\text{ CFU/mL} to N(t)=1.00×102 CFU/mLN(t) = 1.00 \times 10^2\text{ CFU/mL} over t=6.00 hourst = 6.00\text{ hours}. Calculate the clearance rate constant kk (in h−1\text{h}^{-1}) and the half-life t1/2t_{1/2} (in hours).

Answer

k=16.00ln⁡(8.00×1051.00×102)=ln⁡(8000)6.00≈1.4977 h−1≈1.50 h−1k = \frac{1}{6.00}\ln\left(\frac{8.00 \times 10^5}{1.00 \times 10^2}\right) = \frac{\ln(8000)}{6.00} \approx 1.4977\text{ h}^{-1} \approx 1.50\text{ h}^{-1}; t1/2=ln⁡(2)1.4977≈0.463 hourst_{1/2} = \frac{\ln(2)}{1.4977} \approx 0.463\text{ hours}.

02

An antibiotic reduces a bacterial population by 90%90\% in 3.00 hours3.00\text{ hours} following first-order kinetics. Determine the specific killing rate constant kk and the time required to kill 99.9%99.9\% of the population.

Answer

For 90%90\% reduction, N(t)/N0=0.10N(t)/N_0 = 0.10, so k=ln⁡(1/0.10)3.00=ln⁡(10)3.00≈0.768 h−1k = \frac{\ln(1/0.10)}{3.00} = \frac{\ln(10)}{3.00} \approx 0.768\text{ h}^{-1}. For 99.9%99.9\% reduction, remaining fraction is 0.001=10−30.001 = 10^{-3}, so t=ln⁡(1000)k=3ln⁡(10)0.7675=9.00 hourst = \frac{\ln(1000)}{k} = \frac{3\ln(10)}{0.7675} = 9.00\text{ hours}.

03

Two multidrug-resistant strains are treated with an antimicrobial peptide. Strain A clears with t1/2=45.0 minutest_{1/2} = 45.0\text{ minutes}, while Strain B clears with k=0.550 h−1k = 0.550\text{ h}^{-1}. Which strain is cleared faster, and what is the ratio of their clearance rate constants kA/kBk_A / k_B?

Answer

Convert Strain A's half-life to hours: t1/2,A=0.750 ht_{1/2, A} = 0.750\text{ h}. Its rate constant is kA=ln⁡(2)0.750 h≈0.924 h−1k_A = \frac{\ln(2)}{0.750\text{ h}} \approx 0.924\text{ h}^{-1}. Since kA=0.924 h−1>kB=0.550 h−1k_A = 0.924\text{ h}^{-1} > k_B = 0.550\text{ h}^{-1}, Strain A is cleared faster. The ratio is kAkB=0.92420.550≈1.68\frac{k_A}{k_B} = \frac{0.9242}{0.550} \approx 1.68.

Loading workspace…