Resources

A spherical synthetic liposome lacking protein channels is placed in pure distilled water at 25.0∘C25.0^\circ\text{C} (298.15K298.15\text{K}). The liposome membrane is completely impermeable to the internal solute MgSO4\text{MgSO}_4, which completely dissociates into Mg2+\text{Mg}^{2+} and SO42−\text{SO}_4^{2-} (i=2.0i = 2.0). Due to rapid initial osmosis, the liposome develops an internal osmotic pressure of Π=7.43 bar\Pi = 7.43\text{ bar} at the moment of swelling. Using the van 't Hoff relation Π=iCRT\Pi = iCRT with R=0.0831 L⋅bar/(mol⋅K)R = 0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}), determine the initial molar concentration (CC) of MgSO4\text{MgSO}_4 encapsulated inside the liposome.

Answer and steps

Final answer

C=0.150 MC = 0.150\text{ M}

Steps

01

Understand the Relationship Governing Osmotic Pressure

Osmotic pressure (Π\Pi) is a colligative property defined as the pressure required to prevent the net inward flow of water across a semipermeable membrane into a solution. For a solute dissolved in water, this is modeled by the van 't Hoff equation:

Π=iCRT\Pi = iCRT

Where:

  • Π\Pi is the osmotic pressure (7.43 bar7.43\text{ bar}).
  • ii is the van 't Hoff factor, representing the number of discrete particles produced per formula unit when dissolved.
  • CC is the molar concentration of the solute (mol/L\text{mol/L} or M\text{M}).
  • RR is the ideal gas constant (0.0831 L⋅bar/(mol⋅K)0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K})).
  • TT is the absolute temperature (298.15 K298.15\text{ K}).
02

Determine the van 't Hoff Factor (ii)

Because MgSOX4\ce{MgSO4} dissociates completely in water according to:

MgSOX4(s)→MgX2+(aq)+SOX4X2−(aq)\ce{MgSO4 (s) -> Mg^{2+} (aq) + SO4^{2-} (aq)}

Each unit produces 11 cation (MgX2+\ce{Mg^2+}) and 11 anion (SOX4X2−\ce{SO4^2-}), giving a total of 22 moles of osmotic particles per mole of salt: i=2.0i = 2.0

Common Pitfall: A frequent mistake is omitting ii (or assuming i=1i = 1), treating ionic salts as intact molecules. Because osmosis depends on the total number of dissolved solute particles, omitting ii would lead to an overestimated concentration by a factor of two.

03

Solve for Molar Concentration (CC)

Rearrange the van 't Hoff equation to isolate CC:

C=ΠiRTC = \frac{\Pi}{i R T}

Substitute the given values into the expression:

C=7.43 bar2.0⋅0.0831 L⋅bar/(mol⋅K)⋅298.15 KC = \frac{7.43\text{ bar}}{2.0 \cdot 0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}) \cdot 298.15\text{ K}}

Calculate the denominator:

iRT=2.0⋅0.0831⋅298.15=49.55253 L⋅bar/moli R T = 2.0 \cdot 0.0831 \cdot 298.15 = 49.55253\text{ L}\cdot\text{bar}/\text{mol}

Now calculate CC:

C=7.4349.55253≈0.14994 mol/L≈0.150 MC = \frac{7.43}{49.55253} \approx 0.14994\text{ mol/L} \approx 0.150\text{ M}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the van 't Hoff factor i = 2.0, treating MgSO4 as a non-electrolyte, which doubles the calculated concentration to 0.300 mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Π=CRT  ⟹  C=Π(RT)\Pi = CRT \implies C = \frac{\Pi}{(RT)}

    Correct

    Π=iCRT  ⟹  C=ΠiRT\Pi = iCRT \implies C = \frac{\Pi}{iRT}

    You used the formula for a non-electrolyte (Π=CRT\Pi = CRT) rather than the full relation Π=iCRT\Pi = iCRT. Because MgSOX4\ce{MgSO4} dissociates into two ions (MgX2+\ce{Mg^{2+}} and SOX4X2−\ce{SO4^{2-}}), you need to include the factor i=2.0i = 2.0.

  2. Step 2

    C=7.430.0831×298.15  ⟹  C=7.4324.78C = \frac{7.43}{0.0831 \times 298.15} \implies C = \frac{7.43}{24.78}

    Correct

    C=7.432.0×0.0831×298.15≈7.4349.55C = \frac{7.43}{2.0 \times 0.0831 \times 298.15} \approx \frac{7.43}{49.55}

    You substituted the values and evaluated the denominator accurately based on your formula, but the denominator was missing the factor of 2.02.0 from Step 1.

  3. Step 3

    C=0.300 mol/LC = 0.300\text{ mol/L}

    Correct

    C=0.150 MC = 0.150\text{ M}

    Your final calculation directly followed your formula, but omitting ii doubled the final molar concentration.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the ideal gas constant RR and absolute temperature TT.

You performed accurate algebraic manipulation to isolate concentration CC.

You executed the arithmetic and unit assignment without calculation slips.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of van 't Hoff factor

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an ionic electrolyte as an undissociated single solute particle, overlooking that osmotic pressure depends on the total count of free particles in solution via the van 't Hoff factor ii.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electrolyte vs. Non-Electrolyte Check
  • Osmotic pressure is a colligative property governed by Π=iCRT\Pi = iCRT, where ii is the number of dissolved particles per formula unit.

  • Whenever a solute is an ionic salt or dissociating compound, explicitly find ii before writing down the van 't Hoff equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the full van 't Hoff equation: Π=iCRT\Pi = iCRT.

  2. Substitute i=2.0i = 2.0 for the complete dissociation of MgSOX4→MgX2++SOX4X2−\ce{MgSO4 -> Mg^{2+} + SO4^{2-}}.

  3. Rearrange for molar concentration: C=ΠiRTC = \frac{\Pi}{iRT}.

  4. Substitute the given numbers: C=7.43 bar2.0×0.0831 L⋅bar/(mol⋅K)×298.15 K=7.4349.5525≈0.150 mol/LC = \frac{7.43\text{ bar}}{2.0 \times 0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}) \times 298.15\text{ K}} = \frac{7.43}{49.5525} \approx 0.150\text{ mol/L}.

Final answer

C=0.150 MC = 0.150\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review colligative properties to remember that osmotic pressure depends on total dissolved particle concentration (osmolarity =iC= iC), not just formula molarity.

  • Practice checking whether a solute is an electrolyte (like NaCl\ce{NaCl}, CaClX2\ce{CaCl2}, MgSOX4\ce{MgSO4}) or a non-electrolyte (like glucose or sucrose) as the very first step of an osmotic pressure problem.

OverviewACEpath Teacher's Diagnosis

02 The student multiplies by the van 't Hoff factor instead of dividing when rearranging the equation, yielding C = 0.600 mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Π=iCRT\Pi = iCRT

  2. Step 2

    C=Π×iRTC = \frac{\Pi \times i}{RT}

    Correct

    C=ΠiRTC = \frac{\Pi}{iRT}

    To isolate CC from Π=iCRT\Pi = iCRT, you need to divide both sides by the product iRTiRT, which places ii in the denominator.

  3. Step 3

    C=7.43×2.00.0831×298.15  ⟹  C=14.8624.78C = \frac{7.43 \times 2.0}{0.0831 \times 298.15} \implies C = \frac{14.86}{24.78}

    Correct

    C=7.432.0×0.0831×298.15=7.4349.5525C = \frac{7.43}{2.0 \times 0.0831 \times 298.15} = \frac{7.43}{49.5525}

    You substituted the correct numerical values into your rearranged equation and calculated the arithmetic correctly, but the result carries over the misplaced factor of ii.

  4. Step 4

    C=0.600 mol/LC = 0.600\text{ mol/L}

    Correct

    C≈0.150 MC \approx 0.150\text{ M}

    Your final concentration is four times too large (0.600 mol/L0.600\text{ mol/L} instead of 0.150 mol/L0.150\text{ mol/L}) because i=2.0i = 2.0 was multiplied rather than divided.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the correct van 't Hoff relation Π=iCRT\Pi = iCRT for colligative osmotic pressure.

You correctly used the given van 't Hoff factor i=2.0i = 2.0 for the complete dissociation of MgSO4\text{MgSO}_4.

You maintained proper units and carried out the arithmetic consistently according to your working equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable isolation error (algebraic inversion of multiplier)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When isolating a multiplied variable from an expression of the form A=wxyzA = wxyz, you multiplied by one of the factors (ii) instead of dividing the entire product to move it to the other side.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate by inverse operations
  • If A=B⋅C⋅DA = B \cdot C \cdot D, then dividing both sides by (B⋅D)(B \cdot D) yields AB⋅D=C\frac{A}{B \cdot D} = C.

  • Always write out dividing both sides by all unwanted factors simultaneously before substituting numbers.

Physical reality check for dissociation
  • Dissociation increases particle count, so a salt producing multiple ions (i>1i > 1) requires a lower initial molar concentration to generate a given osmotic pressure.

  • Verify that dividing by i>1i > 1 reduces the needed salt concentration relative to an undissociated solute (i=1i = 1).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the van 't Hoff relation: Π=iCRT\Pi = iCRT

  2. Divide both sides by iRTiRT to isolate CC: C=ΠiRTC = \frac{\Pi}{iRT}

  3. Substitute the given quantities: C=7.43 bar2.0×0.0831 L⋅bar/(mol⋅K)×298.15 KC = \frac{7.43\text{ bar}}{2.0 \times 0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}) \times 298.15\text{ K}}

  4. Evaluate the denominator: 2.0×0.0831×298.15=49.5525 L⋅bar/mol2.0 \times 0.0831 \times 298.15 = 49.5525\text{ L}\cdot\text{bar}/\text{mol}

  5. Compute the quotient: C=7.4349.5525≈0.14994 mol/LC = \frac{7.43}{49.5525} \approx 0.14994\text{ mol/L}

Final answer

C=0.150 MC = 0.150\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rearranging multi-factor linear formulas like PV=nRTPV = nRT and Π=iCRT\Pi = iCRT purely in symbolic form before writing down numerical values.

  • Perform a conceptual check: ask whether producing twice as many particles should require more salt or less salt to reach the target pressure.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the dissociation of MgSO4 by assuming it dissociates into three ions (i = 3.0), resulting in an underestimated concentration of 0.100 mol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Π=iCRT  ⟹  C=Π(iRT)\Pi = iCRT \implies C = \frac{\Pi}{(iRT)}

  2. Step 2

    C=7.433.0×0.0831×298.15C = \frac{7.43}{3.0 \times 0.0831 \times 298.15}

    Correct

    C=7.432.0×0.0831×298.15C = \frac{7.43}{2.0 \times 0.0831 \times 298.15}

    You substituted i=3.0i = 3.0 into the denominator. Because MgSO4\text{MgSO}_4 dissociates into only two ions (one Mg2+\text{Mg}^{2+} cation and one polyatomic SO42−\text{SO}_4^{2-} anion), the van 't Hoff factor is i=2.0i = 2.0.

  3. Step 3

    C=7.4374.33  ⟹  C=0.100 mol/LC = \frac{7.43}{74.33} \implies C = 0.100\text{ mol/L}

    Correct

    C=7.4349.55≈0.150 mol/LC = \frac{7.43}{49.55} \approx 0.150\text{ mol/L}

    Your arithmetic evaluation was carried out correctly based on your substituted value of i=3.0i = 3.0, but the numerical result is lower than expected because of the initial factor error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the van 't Hoff equation governing osmotic pressure across a semipermeable membrane.

You accurately manipulated the formula algebraically to isolate the unknown molar concentration.

You performed clean and accurate arithmetic using your chosen numbers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect van 't Hoff factor (dissociation count)

You used i=3.0i = 3.0 instead of the provided i=2.0i = 2.0, likely mistaking MgSO4\text{MgSO}_4 for a salt that dissociates into three individual ions.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have counted polyatomic ions as separate individual atoms (or confused MgSO4\text{MgSO}_4 with a 1:2 electrolyte like MgCl2\text{MgCl}_2), rather than recognizing that the sulfate ion (SO42−\text{SO}_4^{2-}) remains as a single intact particle upon dissolution.

REASONING PATH
Your ACEpath teacher’s suggested approach
Count Dissociated Particles
  • For ionic compounds, ii equals the total number of discrete moles of ions released per mole of formula unit, keeping polyatomic ions intact.

  • Write out the complete dissociation equation: MgSOX4→MgX2++SOX4X2−\ce{MgSO4 -> Mg^{2+} + SO4^{2-}}, showing 1 cation + 1 anion = 2 ions (i=2i = 2).

Check Problem Givens
  • Always cross-check your assumed factor against the problem statement, which explicitly provided i=2.0i = 2.0.

  • Scan the prompt for defined constants and dissociation assumptions before plugging in numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute i=2.0i = 2.0, Π=7.43 bar\Pi = 7.43\text{ bar}, R=0.0831 L⋅bar/(mol⋅K)R = 0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}), and T=298.15 KT = 298.15\text{ K} into C=ΠiRTC = \frac{\Pi}{iRT}.

  2. Calculate the denominator: 2.0×0.0831×298.15=49.5525 L⋅bar/mol2.0 \times 0.0831 \times 298.15 = 49.5525\text{ L}\cdot\text{bar}/\text{mol}.

  3. Divide: C=7.4349.5525≈0.150 mol/LC = \frac{7.43}{49.5525} \approx 0.150\text{ mol/L}.

Final answer

C=0.150 MC = 0.150\text{ M}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice writing the balanced dissociation equations for ionic salts containing common polyatomic ions such as SO42−\text{SO}_4^{2-}, NO3−\text{NO}_3^-, and PO43−\text{PO}_4^{3-}.

  • Review how colligative properties depend on the total number of dissolved particles rather than the chemical identity of the atoms inside a polyatomic ion.

Lock it in

Similar question

01

A cell contains an aqueous solution of sodium chloride (NaCl\ce{NaCl}) that completely dissociates (i=2.0i = 2.0). At 20.0∘C20.0^\circ\text{C} (293.15 K293.15\text{ K}), the osmotic pressure measured across the membrane is 4.87 bar4.87\text{ bar}. Using R=0.0831 L⋅bar/(mol⋅K)R = 0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}), find the molar concentration (CC) of NaCl\ce{NaCl}.

Answer

C=0.100 MC = 0.100\text{ M}. Use C=ΠiRT=4.872.0×0.0831×293.15=4.8748.72≈0.100 mol/LC = \frac{\Pi}{iRT} = \frac{4.87}{2.0 \times 0.0831 \times 293.15} = \frac{4.87}{48.72} \approx 0.100\text{ mol/L}.

02

A synthetic vesicle impermeable to calcium chloride (CaClX2\ce{CaCl2}) is immersed in pure water at 25.0∘C25.0^\circ\text{C} (298.15 K298.15\text{ K}). If the encapsulated CaClX2\ce{CaCl2} completely dissociates into three ions (i=3.0i = 3.0) and exerts an osmotic pressure of Π=11.15 bar\Pi = 11.15\text{ bar}, calculate the molarity (CC) of CaClX2\ce{CaCl2}. Take R=0.0831 L⋅bar/(mol⋅K)R = 0.0831\text{ L}\cdot\text{bar}/(\text{mol}\cdot\text{K}).

Answer

C=0.150 MC = 0.150\text{ M}. Use C=ΠiRT=11.153.0×0.0831×298.15=11.1574.33≈0.150 mol/LC = \frac{\Pi}{iRT} = \frac{11.15}{3.0 \times 0.0831 \times 298.15} = \frac{11.15}{74.33} \approx 0.150\text{ mol/L}.

03

Two separate closed vesicles of equal volume are maintained at the same temperature. Vesicle A encapsulates 0.20 M0.20\text{ M} sucrose (a non-electrolyte, i=1i = 1). Vesicle B encapsulates NaX2SOX4\ce{Na2SO4} (which dissociates completely into 33 ions, i=3i = 3). If both vesicles develop the exact same osmotic pressure Π\Pi, what is the molar concentration of NaX2SOX4\ce{Na2SO4} inside Vesicle B?

Answer

CNaX2SOX4≈0.067 MC_{\ce{Na2SO4}} \approx 0.067\text{ M} (or 115 M\frac{1}{15}\text{ M}). Equal osmotic pressure requires equal osmolarity: iACA=iBCB  ⟹  (1)(0.20 M)=(3)CB  ⟹  CB=0.203≈0.067 Mi_A C_A = i_B C_B \implies (1)(0.20\text{ M}) = (3)C_B \implies C_B = \frac{0.20}{3} \approx 0.067\text{ M}.

Loading workspace…