Resources

A geneticist performs a two-point testcross between a dihybrid female fruit fly (GgHhGgHh) and a homozygous recessive male tester (gghhgghh). From this cross, 1,0001{,}000 offspring are scored with the following phenotypic counts: 418418 wild-type (G_H_G\_H\_), 422422 double-mutant (gghhgghh), 7878 mutant for GG only (gghhgghh not matching; specifically ggH_ggH\_), and 8282 mutant for HH only (G_hhG\_hh). (a) Work backwards to deduce the linkage configuration (coupling/cis vs. repulsion/trans) of the alleles in the dihybrid female parent. (b) Calculate the map distance between gene locus GG and gene locus HH in centimorgans (cM\text{cM}).

Answer and steps

Final answer

(a) Cis (coupling) conformation (GH/ghGH / gh), because parental classes (G_H_G\_H\_ and gghhgghh) comprise the majority of progeny; (b) Recombination frequency =78+821000×100%=16.0%= \frac{78 + 82}{1000} \times 100\% = 16.0\%, corresponding to a map distance of 16.0 cM16.0\text{ cM}.

Steps

Part (a): Determining the Linkage Configuration

  1. Understand the Testcross Principle: In a testcross with a homozygous recessive tester (gghhgghh), the tester contributes only recessive alleles (gg and hh) through its gametes. Therefore, the phenotype of each offspring directly reflects the specific allele combination (haplotype) passed down by the gamete of the dihybrid female parent (GgHhGgHh):

    • Offspring G_H_G\_H\_ received a GHGH gamete (418418 flies).
    • Offspring gghhgghh received a ghgh gamete (422422 flies).
    • Offspring ggH_ggH\_ received a gHgH gamete (7878 flies).
    • Offspring G_hhG\_hh received a GhGh gamete (8282 flies).
  2. Identify Parental and Recombinant Classes:

    • Linked genes do not assort independently (1:1:1:11:1:1:1 ratio). Instead, non-crossover gametes (parental types) occur with the highest frequencies, whereas crossover gametes (recombinant types) occur with lower frequencies.
    • The two most abundant phenotypic classes are: Parental types=G_H_  (418)andgghh  (422)\text{Parental types} = G\_H\_ \; (418) \quad \text{and} \quad gghh \; (422)
    • The two least abundant phenotypic classes are: Recombinant types=ggH_  (78)andG_hh  (82)\text{Recombinant types} = ggH\_ \; (78) \quad \text{and} \quad G\_hh \; (82)
  3. Deduce Coupling (Cis) vs. Repulsion (Trans):

    • Because the parental gametes inherited from the mother's homologous chromosomes are GHGH and ghgh, the two dominant alleles are located on one homolog and the two recessive alleles on the other.
    • This arrangement is called the cis (or coupling) conformation, written as: GHgh\frac{GH}{gh} (Note: A trans or repulsion conformation would have the dominant allele of one gene linked with the recessive allele of the other, GhgH\frac{Gh}{gH}, which would make GhGh and gHgH the most frequent classes).

Part (b): Calculating the Map Distance

  1. Calculate the Total Recombinant Progeny: Total recombinants=78+82=160\text{Total recombinants} = 78 + 82 = 160
  2. Calculate the Total Progeny: Total offspring=418+422+78+82=1,000\text{Total offspring} = 418 + 422 + 78 + 82 = 1{,}000
  3. Determine the Recombination Frequency (RF\text{RF}): RF=Number of recombinant offspringTotal number of offspring×100%\text{RF} = \frac{\text{Number of recombinant offspring}}{\text{Total number of offspring}} \times 100\% RF=1601,000×100%=16.0%\text{RF} = \frac{160}{1{,}000} \times 100\% = 16.0\%
  4. Convert to Map Distance:

    • By definition, a recombination frequency of 1%1\% corresponds to a genetic map distance of 1 centimorgan1\text{ centimorgan} (1 cM1\text{ cM}, or 1 map unit1\text{ map unit}).
    • Therefore, the map distance between locus GG and locus HH is: Map distance=16.0 cM\text{Map distance} = 16.0\text{ cM}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses recombinant and parental offspring classes, identifying the low-frequency classes as parental and concluding repulsion (trans) linkage configuration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Parental classes are the least frequent: 82 (G_hh)  ⟹  82\text{ }(G\_hh) \implies Female alleles are in repulsion (trans) configuration: Gh/gHGh/gH

    Correct

    Parental classes are the most frequent: G_H (418)G\_H\text{ }(418) and gghh (422)  ⟹  gghh\text{ }(422) \implies Female alleles are in coupling (cis) configuration: GH/ghGH/gh

    You classified the lowest-frequency classes as parental. Non-crossover (parental) gametes are always produced in the greatest abundance, so the dominant alleles GG and HH must be linked together on one chromosome (GHGH) and the recessive alleles on the homolog (ghgh).

  2. Step 2

    Recombinant offspring\text{Recombinant offspring} = 418 + 422 = 840   ⟹  \implies Map distance\text{Map distance} = (8401000)\left(\frac{840}{1000}\right) ×\times 100 = 84 cM\text{ cM}

    Correct

    Recombinant offspring\text{Recombinant offspring} = 78 + 82 = 160   ⟹  \implies Map distance\text{Map distance} = (1601000)\left(\frac{160}{1000}\right) ×\times 100% = 16.0 cM\text{ cM}

    Because you swapped parental and recombinant classes in the first step, you summed the two largest classes (418+422418 + 422) instead of the crossover classes (78+8278 + 82). In addition, standard two-point testcross map distances between linked genes cannot exceed 50 cM50\text{ cM}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the testcross offspring phenotypes reveal the gametes produced by the heterozygous parent.

You correctly applied the mathematical formula relating recombination frequency to map distance in centimorgans.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Parental and Recombinant Classes

You identified the least frequent phenotypic classes as parental rather than recombinant.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the biological basis of linkage: crossing over is a less-frequent event than non-crossing-over during meiosis, meaning parental genotypes must constitute the majority of testcross offspring (>50%>50\%) and recombinants must constitute the minority (<50%<50\%).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Parental Classes
  • In any testcross involving linked genes, the two phenotypic classes with the highest counts represent parental (non-crossover) gametes.

  • Sort the phenotypic classes by count from highest to lowest; label the two largest as parental and the two smallest as recombinant.

Maximum Map Distance Check
  • Two-point testcross recombination frequency cannot exceed 50%50\%, corresponding to a maximum measurable distance of 50 cM50\text{ cM} for linked genes.

  • If your calculated map distance exceeds 50 cM50\text{ cM}, check whether you accidentally summed the parental counts instead of the recombinant counts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the two most frequent classes (418 G_H_418\text{ }G\_H\_ and 422 gghh422\text{ }gghh) as parental, indicating alleles are linked in cis: GHgh\frac{GH}{gh}.

  2. Identify the two least frequent classes (78 ggH_78\text{ }ggH\_ and 82 G_hh82\text{ }G\_hh) as recombinant.

  3. Sum the recombinant offspring: 78+82=16078 + 82 = 160.

  4. Calculate recombination frequency: RF=1601000×100%=16.0%=16.0 cM\text{RF} = \frac{160}{1000} \times 100\% = 16.0\% = 16.0\text{ cM}.

Final answer

(a) Cis (coupling) conformation (GH/ghGH / gh); (b) Map distance =16.0 cM= 16.0\text{ cM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review chromosome behavior during prophase I of meiosis to see why non-crossover chromatids outnumber crossover chromatids.

  • Practice determining cis versus trans configurations across multiple two-point testcross data sets by always identifying the two highest-count phenotypic classes first.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the recombination frequency using only one recombinant phenotypic class instead of summing all recombinant classes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Most frequent classes are 418418 (GHGH) and 422422 (ghgh)   ⟹  \implies Female parent is in coupling (cis) configuration: GH/ghGH/gh

  2. Step 2

    Recombinant count=78  ⟹  Map distance=(78/1000)×100=7.8 cM\text{Recombinant count} = 78 \implies \text{Map distance} = (78 / 1000) \times 100 = 7.8\text{ cM}

    Correct

    Total recombinants=78+82=160  ⟹  Map distance=1601000×100%=16.0 cM\text{Total recombinants} = 78 + 82 = 160 \implies \text{Map distance} = \frac{160}{1000} \times 100\% = 16.0\text{ cM}

    You only accounted for the ggH_ggH\_ recombinant class (7878) and omitted the reciprocal G_hhG\_hh recombinant class (8282). Both crossover classes must be summed to find the total number of recombinant offspring.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the two most abundant phenotypic classes as non-crossover parental types.

You correctly deduced that the female parent has a coupling (cis) linkage configuration (GH/ghGH/gh).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Recombinant Class

You counted only one of the two recombinant phenotypic classes (7878) instead of adding both recombinant classes (78+8278 + 82).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that a single crossover event generates two reciprocal recombinant gametic types, meaning all non-parental phenotypic classes must be summed to calculate recombination frequency.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sum All Recombinant Types
  • Recombination Frequency=∑Recombinant ProgenyTotal Progeny×100%\text{Recombination Frequency} = \frac{\sum \text{Recombinant Progeny}}{\text{Total Progeny}} \times 100\%

  • Identify all non-parental classes and add their counts together before dividing by the total offspring count.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify both recombinant phenotypic classes: ggH_ (78)ggH\_\ (78) and G_hh (82)G\_hh\ (82).

  2. Sum both recombinant classes: Total recombinants=78+82=160\text{Total recombinants} = 78 + 82 = 160.

  3. Calculate recombination frequency: RF=1601000×100%=16.0%\text{RF} = \frac{160}{1000} \times 100\% = 16.0\%.

  4. Convert recombination frequency to map distance: 16.0%=16.0 cM16.0\% = 16.0\text{ cM}.

Final answer

(a) Cis (coupling) configuration (GH/ghGH/gh); (b) Map distance =16.0 cM= 16.0\text{ cM}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always verify that the sum of all parental counts and all recombinant counts equals the total population scored.

  • Double-check that you have identified two reciprocal recombinant classes in a two-point testcross before calculating recombination frequency.

OverviewACEpath Teacher's Diagnosis

03 The student divides the number of recombinants by the number of parental offspring rather than by the total number of progeny.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Most frequent classes are 418418 (GHGH) and 422422 (ghgh) ⟹\Longrightarrow Female parent is in coupling (cis) configuration: GH/ghGH/gh

  2. Step 2

    Recombinants=78+82=160\text{Recombinants} = 78 + 82 = 160, Parentals=418+422=840\text{Parentals} = 418 + 422 = 840

  3. Step 3

    Map distance=(160840)×100=19.05 cM\text{Map distance} = \left(\frac{160}{840}\right) \times 100 = 19.05\text{ cM}

    Correct

    Map distance=RF×100=(1601,000)×100%=16.0 cM\text{Map distance} = \text{RF} \times 100 = \left(\frac{160}{1{,}000}\right) \times 100\% = 16.0\text{ cM}

    You divided the recombinants by the number of parental offspring (840840) rather than by the total number of scored progeny (1,0001{,}000). Recombination frequency is the proportion of recombinant gametes out of all gametes produced.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the two most abundant classes as parental types to establish the cis configuration.

You correctly summed the recombinant progeny counts (78+82=16078 + 82 = 160).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong denominator in recombination frequency formula

Dividing recombinants by parental progeny instead of total progeny.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating an odds ratio (recombinant : parental) with a true frequency/proportion (recombinant : total). Recombination frequency represents the fraction of all meiotic products that underwent crossing over.

REASONING PATH
Your ACEpath teacher’s suggested approach
Denominator Definition
  • Recombination Frequency (RF)=Total RecombinantsTotal Progeny\text{Recombination Frequency (RF)} = \frac{\text{Total Recombinants}}{\text{Total Progeny}}

  • Always verify that the denominator includes both parental and recombinant individuals ($ parentals\text{parentals} + recombinants\text{recombinants} = total\text{total}$).

Unit Equivalence
  • 1% Recombination=1 cM=1 map unit1\%\text{ Recombination} = 1\text{ cM} = 1\text{ map unit}

  • Multiply the recombinant fraction (out of total) by 100100 to obtain the map distance directly in centimorgans.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Total progeny=840+160=1,000\text{Total progeny} = 840 + 160 = 1{,}000

  2. RF=1601,000=0.160=16.0%\text{RF} = \frac{160}{1{,}000} = 0.160 = 16.0\%

  3. Map distance=16.0 cM\text{Map distance} = 16.0\text{ cM}

Final answer

(a) Coupling (cis) configuration: GHgh\frac{GH}{gh}; (b) 16.0 cM16.0\text{ cM}

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating recombination frequency or map distance, write down Total=Parentals+Recombinants\text{Total} = \text{Parentals} + \text{Recombinants} first to ensure you use the full sample size in the denominator.

  • Practice two-point testcross calculations to reinforce identifying parental vs. recombinant classes.

Lock it in

Similar question

01

A dihybrid plant (AaBbAaBb) is testcrossed with a homozygous recessive tester (aabbaabb). The resulting offspring are: 230 A_B_230\text{ }A\_B\_, 24 A_bb24\text{ }A\_bb, 26 aaB_26\text{ }aaB\_, and 220 aabb220\text{ }aabb. Determine: (a) whether the alleles in the dihybrid parent are in coupling (cis) or repulsion (trans), and (b) the genetic map distance between loci AA and BB.

Answer

(a) Cis (coupling) configuration (AB/abAB / ab), because A_B_A\_B\_ (230230) and aabbaabb (220220) are the two most abundant (parental) classes. (b) Recombinant total =24+26=50= 24 + 26 = 50. Total offspring =500= 500. Map distance =50500×100%=10.0 cM= \frac{50}{500} \times 100\% = 10.0\text{ cM}.

02

In maize, a dihybrid plant heterozygous for colored aleurone (C/cC/c) and waxy endosperm (Wx/wxWx/wx) is testcrossed to a colorless, non-waxy tester (cc wxwxcc\text{ }wxwx). The progeny counts are: 18 colored, non-waxy (C_wxwx)18\text{ colored, non-waxy } (C\_wxwx), 172 colored, waxy (C_Wx_)172\text{ colored, waxy } (C\_Wx\_), 168 colorless, non-waxy (cc wxwx)168\text{ colorless, non-waxy } (cc\text{ }wxwx), and 22 colorless, waxy (cc Wx_)22\text{ colorless, waxy } (cc\text{ }Wx\_). State the allele arrangement of the dihybrid parent and calculate the map distance between CC and WxWx.

Answer

Allele arrangement is cis (C Wx/c wxC\text{ }Wx / c\text{ }wx) because the most frequent classes are C_Wx_C\_Wx\_ (172172) and cc wxwxcc\text{ }wxwx (168168). Recombinants =18+22=40= 18 + 22 = 40. Total progeny =18+172+168+22=380= 18 + 172 + 168 + 22 = 380. Map distance =40380×100%≈10.53 cM= \frac{40}{380} \times 100\% \approx 10.53\text{ cM}.

03

Two linked genes, DD and EE, are separated by 18 cM18\text{ cM}. A female fly with genotype De/dEDe / dE (repulsion) is crossed with a homozygous recessive male (de/dede / de). Out of 2,0002{,}000 testcross progeny, predict the expected number of double-recessive (ddeeddee) offspring.

Answer

Since the female parent is in repulsion (De/dEDe / dE), the parental gametes are DeDe and dEdE, while the recombinant gametes are DEDE and dede. Total recombinant frequency is 18%18\%, so each recombinant class constitutes 9%9\%. Expected ddeeddee offspring =0.09×2,000=180= 0.09 \times 2{,}000 = 180 flies.

Loading workspace…