Resources

A climber residing at an altitude of 4300 m4300\text{ m} presents with chronic high-altitude respiratory alkalosis due to sustained hypoxic ventilatory drive. Arterial blood gas analysis reveals a plasma pH=7.52\text{pH} = 7.52 and an arterial carbon dioxide partial pressure PaCO2=28.0 mmHgP_{\text{a}\text{CO}_2} = 28.0\text{ mmHg}. In response to this hypocapnia, the renal proximal tubule decreases proton secretion (via apical Na+/H+\text{Na}^+/\text{H}^+ antiporters) and downregulates basolateral Na+/3HCO3−\text{Na}^+/3\text{HCO}_3^- cotransport, actively excreting bicarbonate to restore physiological pH toward 7.407.40. Using the Henderson-Hasselbalch equation pH=pKa+log⁡10([HCO3−]α⋅PaCO2)\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{HCO}_3^-]}{\alpha \cdot P_{\text{a}\text{CO}_2}}\right) where pKa=6.10\text{p}K_a = 6.10 and the solubility coefficient of CO2\text{CO}_2 in human plasma is α=0.0300 mM/mmHg\alpha = 0.0300\text{ mM/mmHg}, calculate the actual compensated plasma bicarbonate concentration [HCO3−][\text{HCO}_3^-] in mmol/L\text{mmol/L}.

Answer and steps

Final answer

22.1 mmol/L22.1\text{ mmol/L}

Steps

01

Physiological Context and the Buffer Equation

At high altitude, low atmospheric oxygen triggers sustained hyperventilation to increase oxygen uptake. This hyperventilation blows off carbon dioxide (COX2\ce{CO2}), lowering arterial Pa COX2P_{\ce{aCO2}} (hypocapnia) and shifting the blood equilibrium toward respiratory alkalosis:

COX2+HX2O⇌HX2COX3⇌HX++HCOX3X−\ce{CO2 + H2O <=> H2CO3 <=> H+ + HCO3-}

To compensate for the elevated blood pH\text{pH}, the kidneys excrete bicarbonate (HCOX3X−\ce{HCO3-}) over several days, lowering [HCOX3X−][\ce{HCO3-}] to pull the pH\text{pH} back toward the normal physiological range (∼7.40\sim 7.40).

The relationship between pH\text{pH}, plasma bicarbonate concentration, and dissolved carbon dioxide is quantified by the Henderson-Hasselbalch equation:

pH=pKa+log⁡10([HCOX3X−]α⋅Pa COX2)\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\ce{HCO3-}]}{\alpha \cdot P_{\ce{aCO2}}}\right)


02

Identify the Given Parameters

  • Measured plasma pH=7.52\text{pH} = 7.52
  • Measured arterial partial pressure of carbon dioxide, Pa COX2=28.0 mmHgP_{\ce{aCO2}} = 28.0\text{ mmHg}
  • Dissociation constant parameter, pKa=6.10\text{p}K_a = 6.10
  • Solubility coefficient for COX2\ce{CO2}, α=0.0300 mM/mmHg=0.0300 mmol/(L⋅mmHg)\alpha = 0.0300\text{ mM/mmHg} = 0.0300\text{ mmol}/(\text{L}\cdot\text{mmHg})

03

Calculate Dissolved Carbon Dioxide Concentration

The concentration of dissolved carbon dioxide ([COX2]dissolved=α⋅Pa COX2[\ce{CO2}]_{\text{dissolved}} = \alpha \cdot P_{\ce{aCO2}}) in plasma is:

[COX2]dissolved=0.0300 mmol/(L⋅mmHg)⋅28.0 mmHg=0.840 mmol/L[\ce{CO2}]_{\text{dissolved}} = 0.0300\text{ mmol}/(\text{L}\cdot\text{mmHg}) \cdot 28.0\text{ mmHg} = 0.840\text{ mmol/L}


04

Solve for Bicarbonate Concentration [HCOX3X−][\ce{HCO3-}]

Rearrange the Henderson-Hasselbalch equation:

pH−pKa=log⁡10([HCOX3X−]α⋅Pa COX2)\text{pH} - \text{p}K_a = \log_{10}\left(\frac{[\ce{HCO3-}]}{\alpha \cdot P_{\ce{aCO2}}}\right)

Substitute the numerical values:

7.52−6.10=1.42=log⁡10([HCOX3X−]0.840)7.52 - 6.10 = 1.42 = \log_{10}\left(\frac{[\ce{HCO3-}]}{0.840}\right)

Take the antilogarithm (base 1010) on both sides:

[HCOX3X−]0.840=101.42≈26.3027\frac{[\ce{HCO3-}]}{0.840} = 10^{1.42} \approx 26.3027

Multiply by 0.8400.840:

[HCOX3X−]=0.840⋅26.3027≈22.094 mmol/L≈22.1 mmol/L[\ce{HCO3-}] = 0.840 \cdot 26.3027 \approx 22.094\text{ mmol/L} \approx 22.1\text{ mmol/L}


Pitfall to Avoid

Do not substitute the target normal physiological pH\text{pH} of 7.407.40 or standard sea-level bicarbonate (24 mmol/L24\text{ mmol/L}) into the equation. The calculation requires the climber's actual measured plasma values (pH=7.52\text{pH} = 7.52 and Pa COX2=28.0 mmHgP_{\ce{aCO2}} = 28.0\text{ mmHg}) to determine the current state of renal compensation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student substitutes the target physiological pH of 7.40 instead of the patient's actual measured pH of 7.52 into the Henderson-Hasselbalch equation, calculating a bicarbonate concentration of 16.8 mmol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    α⋅PaCO2=0.0300⋅28.0=0.840 mM\alpha \cdot P_{\text{a}\text{CO}_2} = 0.0300 \cdot 28.0 = 0.840\text{ mM}

  2. Step 2

    pH=pKa+log⁡10([HCO3−]α⋅PaCO2)  ⟹  7.40=6.10+log⁡10([HCO3−]0.840)\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{HCO}_3^-]}{\alpha \cdot P_{\text{a}\text{CO}_2}}\right) \implies 7.40 = 6.10 + \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right)

    Correct

    pH=pKa+log⁡10([HCO3−]α⋅PaCO2)  ⟹  7.52=6.10+log⁡10([HCO3−]0.840)\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{HCO}_3^-]}{\alpha \cdot P_{\text{a}\text{CO}_2}}\right) \implies 7.52 = 6.10 + \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right)

    You substituted the baseline physiological setpoint of 7.407.40 instead of the patient's measured arterial blood gas value of pH=7.52\text{pH} = 7.52.

  3. Step 3

    1.30=log⁡10([HCO3−]0.840)  ⟹  [HCO3−]0.840=101.30≈19.951.30 = \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right) \implies \frac{[\text{HCO}_3^-]}{0.840} = 10^{1.30} \approx 19.95

    Correct

    1.42=log⁡10([HCO3−]0.840)  ⟹  [HCO3−]0.840=101.42≈26.301.42 = \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right) \implies \frac{[\text{HCO}_3^-]}{0.840} = 10^{1.42} \approx 26.30

    Your algebraic isolation and antilog evaluation were mathematically correct, but the result was shifted by using the incorrect pH value from the previous step.

  4. Step 4

    [HCO3−]=19.95⋅0.840=16.8 mmol/L[\text{HCO}_3^-] = 19.95 \cdot 0.840 = 16.8\text{ mmol/L}

    Correct

    [HCO3−]=26.3027⋅0.840≈22.1 mmol/L[\text{HCO}_3^-] = 26.3027 \cdot 0.840 \approx 22.1\text{ mmol/L}

    Your final calculation followed consistently from your earlier substitution error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the effective dissolved carbon dioxide concentration using Henry's law.

You stated the correct form of the Henderson-Hasselbalch equation for the bicarbonate buffer system.

You carried out the logarithmic and algebraic transformations accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parameter substitution error (target setpoint vs. measured state)

You grabbed the target reference pH (7.407.40) described in the physiological mechanism rather than the actual measured patient pH (7.527.52).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the ultimate homeostatic target setpoint with the actual present arterial blood gas measurement when evaluating current acid-base compensation.

REASONING PATH
Your ACEpath teacher’s suggested approach
State vs. Target Distinction
  • The Henderson-Hasselbalch equation reflects the equilibrium of the blood sample at the moment it was drawn.

  • Always substitute the patient's measured lab values (actual current pH\text{pH} and PaCO2P_{\text{a}\text{CO}_2}), never the ideal physiological baseline (7.407.40), unless the problem specifically asks for full, complete compensation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the measured values: 7.52=6.10+log⁡10([HCO3−]0.840)7.52 = 6.10 + \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right)

  2. Subtract pKa\text{p}K_a: 7.52−6.10=1.42=log⁡10([HCO3−]0.840)7.52 - 6.10 = 1.42 = \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right)

  3. Take base-1010 powers: [HCO3−]0.840=101.42≈26.3027\frac{[\text{HCO}_3^-]}{0.840} = 10^{1.42} \approx 26.3027

  4. Multiply by the dissolved CO2\text{CO}_2 concentration: [HCO3−]=26.3027×0.840≈22.094 mmol/L[\text{HCO}_3^-] = 26.3027 \times 0.840 \approx 22.094\text{ mmol/L}

Final answer

22.1 mmol/L22.1\text{ mmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Highlight measured clinical variables versus reference physiological targets before setting up equilibrium formulas.

  • Verify whether the question specifies an ongoing partially compensated state or a hypothetical fully compensated state.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to multiply the arterial partial pressure of carbon dioxide by the solubility coefficient α, yielding an unphysically high bicarbonate concentration of 736 mmol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    pH=pKa+log⁡10([HCO3−]PaCO2)  ⟹  7.52=6.10+log⁡10([HCO3−]28.0)\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{HCO}_3^-]}{P_{\text{a}\text{CO}_2}}\right) \implies 7.52 = 6.10 + \log_{10}\left(\frac{[\text{HCO}_3^-]}{28.0}\right)

    Correct

    pH=pKa+log⁡10([HCO3−]α⋅PaCO2)  ⟹  7.52=6.10+log⁡10([HCO3−]0.0300⋅28.0)\text{pH} = \text{p}K_a + \log_{10}\left(\frac{[\text{HCO}_3^-]}{\alpha \cdot P_{\text{a}\text{CO}_2}}\right) \implies 7.52 = 6.10 + \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.0300 \cdot 28.0}\right)

    You omitted the CO2\text{CO}_2 solubility coefficient α=0.0300 mM/mmHg\alpha = 0.0300\text{ mM/mmHg}. The denominator in the Henderson-Hasselbalch equation must represent the concentration of dissolved carbon dioxide ([CO2]=α⋅PaCO2=0.840 mmol/L[\text{CO}_2] = \alpha \cdot P_{\text{a}\text{CO}_2} = 0.840\text{ mmol/L}), not the raw partial pressure in mmHg\text{mmHg}.

  2. Step 2

    1.42=log⁡10([HCO3−]28.0)  ⟹  [HCO3−]28.0=101.42≈26.301.42 = \log_{10}\left(\frac{[\text{HCO}_3^-]}{28.0}\right) \implies \frac{[\text{HCO}_3^-]}{28.0} = 10^{1.42} \approx 26.30

    Correct

    1.42=log⁡10([HCO3−]0.840)  ⟹  [HCO3−]0.840=101.42≈26.301.42 = \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right) \implies \frac{[\text{HCO}_3^-]}{0.840} = 10^{1.42} \approx 26.30

    Your algebraic rearrangement and calculation of 101.42≈26.3010^{1.42} \approx 26.30 were mathematically sound, but the expression carried forward the missing α\alpha factor from Step 1.

  3. Step 3

    [HCO3−]=26.30⋅28.0=736 mmol/L[\text{HCO}_3^-] = 26.30 \cdot 28.0 = 736\text{ mmol/L}

    Correct

    [HCO3−]=26.3027⋅0.840 mmol/L≈22.1 mmol/L[\text{HCO}_3^-] = 26.3027 \cdot 0.840\text{ mmol/L} \approx 22.1\text{ mmol/L}

    Multiplying by 28.028.0 rather than 0.840 mmol/L0.840\text{ mmol/L} yielded 736 mmol/L736\text{ mmol/L}, which is over thirty times higher than normal physiological plasma bicarbonate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly subtracted pKa=6.10\text{p}K_a = 6.10 from pH=7.52\text{pH} = 7.52 to obtain 1.421.42.

You accurately converted the base-10 logarithm to an exponential expression and evaluated 101.42≈26.3010^{1.42} \approx 26.30.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Solubility Factor in Buffer Ratio

You substituted the raw partial pressure PaCO2=28.0 mmHgP_{\text{a}\text{CO}_2} = 28.0\text{ mmHg} directly into the ratio without converting it to dissolved [CO2][\text{CO}_2].

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing partial pressure (PaCO2P_{\text{a}\text{CO}_2} in mmHg\text{mmHg}) with dissolved molar concentration ([CO2][\text{CO}_2] in mmol/L\text{mmol/L}) in the denominator of the clinical Henderson-Hasselbalch equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency in Henderson-Hasselbalch
  • Both terms in the log ratio must have identical units of concentration (usually mmol/L\text{mmol/L} or M\text{M}): ratio=[HCO3−]α⋅PaCO2\text{ratio} = \frac{[\text{HCO}_3^-]}{\alpha \cdot P_{\text{a}\text{CO}_2}}.

  • Always multiply PaCO2P_{\text{a}\text{CO}_2} by Henry's law constant α=0.0300 mM/mmHg\alpha = 0.0300\text{ mM/mmHg} before inserting it into the logarithm.

Physiological Reality Check
  • Human plasma [HCO3−][\text{HCO}_3^-] normally hovers near 24 mmol/L24\text{ mmol/L} and rarely deviates outside the range of 10–45 mmol/L10\text{--}45\text{ mmol/L} even during severe pathology.

  • If your calculated bicarbonate concentration is hundreds of mmol/L\text{mmol/L}, check whether you forgot to multiply by α=0.03\alpha = 0.03.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert arterial partial pressure to dissolved [CO2][\text{CO}_2]: [CO2]=0.0300 mM/mmHg⋅28.0 mmHg=0.840 mmol/L[\text{CO}_2] = 0.0300\text{ mM/mmHg} \cdot 28.0\text{ mmHg} = 0.840\text{ mmol/L}.

  2. Set up the logarithmic ratio: pH−pKa=7.52−6.10=1.42=log⁡10([HCO3−]0.840)\text{pH} - \text{p}K_a = 7.52 - 6.10 = 1.42 = \log_{10}\left(\frac{[\text{HCO}_3^-]}{0.840}\right).

  3. Apply the antilogarithm: [HCO3−]0.840=101.42≈26.3027\frac{[\text{HCO}_3^-]}{0.840} = 10^{1.42} \approx 26.3027.

  4. Multiply to find the compensated bicarbonate concentration: [HCO3−]=26.3027⋅0.840 mmol/L≈22.1 mmol/L[\text{HCO}_3^-] = 26.3027 \cdot 0.840\text{ mmol/L} \approx 22.1\text{ mmol/L}.

Final answer

22.1 mmol/L22.1\text{ mmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting blood gas partial pressures to aqueous concentrations using Henry's law constant α=0.0300 mM/mmHg\alpha = 0.0300\text{ mM/mmHg}.

  • Perform a sanity check on calculated plasma electrolytes by comparing your final value against standard physiological ranges ([HCO3−]≈22–28 mmol/L[\text{HCO}_3^-] \approx 22\text{--}28\text{ mmol/L}).

OverviewACEpath Teacher's Diagnosis

03 The student divides the ratio by the logarithmic base rather than taking the antilogarithm (10^x), solving 10 · 1.42 instead of 10^1.42 and obtaining 11.9 mmol/L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    α⋅PaCOX2=0.0300⋅28.0=0.840 mM\alpha \cdot P_{\text{a}\ce{CO2}} = 0.0300 \cdot 28.0 = 0.840\text{ mM}

  2. Step 2

    7.52=6.10+log⁡10([HCOX3X−]0.840)  ⟹  log⁡10([HCOX3X−]0.840)=1.427.52 = 6.10 + \log_{10}\left(\frac{[\ce{HCO3-}]}{0.840}\right) \implies \log_{10}\left(\frac{[\ce{HCO3-}]}{0.840}\right) = 1.42

  3. Step 3

    [HCOX3X−]0.840=10⋅1.42=14.2\frac{[\ce{HCO3-}]}{0.840} = 10 \cdot 1.42 = 14.2

    Correct

    [HCOX3X−]0.840=101.42≈26.30\frac{[\ce{HCO3-}]}{0.840} = 10^{1.42} \approx 26.30

    To invert a base-10 logarithm log⁡10(y)=x\log_{10}(y) = x, you must raise 1010 to the power of xx (10x10^x), rather than multiplying 1010 by xx.

  4. Step 4

    [HCOX3X−]=14.2⋅0.840=11.9 mmol/L[\ce{HCO3-}] = 14.2 \cdot 0.840 = 11.9\text{ mmol/L}

    Correct

    [HCOX3X−]=26.30⋅0.840≈22.1 mmol/L[\ce{HCO3-}] = 26.30 \cdot 0.840 \approx 22.1\text{ mmol/L}

    This step carried forward the incorrect ratio from Step 3; evaluating with the correct antilogarithm yields approximately 22.1 mmol/L22.1\text{ mmol/L}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the dissolved carbon dioxide concentration using Henry's law.

You accurately substituted the arterial pH and pKa values into the Henderson-Hasselbalch relationship.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Logarithm inversion error

You wrote 10⋅1.4210 \cdot 1.42 instead of 101.4210^{1.42} when removing log⁡10\log_{10}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the inverse of the common logarithm ( 10x \,10^x\,) with scalar multiplication by 1010.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverting Common Logarithms
  • If log⁡10(A)=B\log_{10}(A) = B, then A=10BA = 10^B, not 10×B10 \times B.

  • Always convert a logarithmic equation log⁡b(y)=x\log_{b}(y) = x into its exponential form y=bxy = b^x before isolating the unknown.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the antilogarithm: [HCOX3X−]0.840=101.42≈26.303\frac{[\ce{HCO3-}]}{0.840} = 10^{1.42} \approx 26.303.

  2. Multiply both sides by 0.840 mmol/L0.840\text{ mmol/L}: [HCOX3X−]=26.303⋅0.840≈22.1 mmol/L[\ce{HCO3-}] = 26.303 \cdot 0.840 \approx 22.1\text{ mmol/L}.

Final answer

22.1 mmol/L22.1\text{ mmol/L}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the exponential inverse definition of log⁡10\log_{10}.

  • Practice solving Henderson-Hasselbalch calculations where you solve for either the numerator or denominator inside the log term.

Lock it in

Similar question

01

A patient with acute anxiety-induced hyperventilation has a measured plasma pH=7.58\text{pH} = 7.58 and PaCO2=25.0 mmHgP_{\text{a}\text{CO}_2} = 25.0\text{ mmHg}. Given pKa=6.10\text{p}K_a = 6.10 and α=0.0300 mM/mmHg\alpha = 0.0300\text{ mM/mmHg}, calculate the patient's current plasma bicarbonate concentration [HCO3−][\text{HCO}_3^-] in mmol/L\text{mmol/L}.

Answer

22.7 mmol/L22.7\text{ mmol/L}. Key steps: Dissolved CO2=0.0300×25.0=0.750 mM\text{CO}_2 = 0.0300 \times 25.0 = 0.750\text{ mM}. Using Henderson-Hasselbalch with the measured pH=7.58\text{pH} = 7.58: 7.58−6.10=1.48=log⁡10([HCO3−]/0.750)7.58 - 6.10 = 1.48 = \log_{10}([\text{HCO}_3^-]/0.750). Thus, [HCO3−]=0.750×101.48≈0.750×30.1995=22.65 mmol/L≈22.7 mmol/L[\text{HCO}_3^-] = 0.750 \times 10^{1.48} \approx 0.750 \times 30.1995 = 22.65\text{ mmol/L} \approx 22.7\text{ mmol/L}.

02

A mountaineer fully acclimatizes after two weeks at high altitude such that renal compensation restores blood pH\text{pH} back to exactly 7.407.40, while persistent hyperventilation maintains PaCO2P_{\text{a}\text{CO}_2} at 26.0 mmHg26.0\text{ mmHg}. Calculate the fully compensated plasma bicarbonate concentration [HCO3−][\text{HCO}_3^-] in mmol/L\text{mmol/L} ( pKa=6.10\,\text{p}K_a = 6.10, α=0.0300 mM/mmHg\alpha = 0.0300\text{ mM/mmHg}).

Answer

15.6 mmol/L15.6\text{ mmol/L}. Key steps: Dissolved CO2=0.0300×26.0=0.780 mM\text{CO}_2 = 0.0300 \times 26.0 = 0.780\text{ mM}. Because full compensation to normal pH\text{pH} is specified, substitute pH=7.40\text{pH} = 7.40: 7.40−6.10=1.307.40 - 6.10 = 1.30. Then [HCO3−]=0.780×101.30≈0.780×19.9526=15.56 mmol/L≈15.6 mmol/L[\text{HCO}_3^-] = 0.780 \times 10^{1.30} \approx 0.780 \times 19.9526 = 15.56\text{ mmol/L} \approx 15.6\text{ mmol/L}.

03

A patient with severe COPD exhibits chronic respiratory acidosis with PaCO2=60.0 mmHgP_{\text{a}\text{CO}_2} = 60.0\text{ mmHg} and measured pH=7.35\text{pH} = 7.35. Downstream renal compensation retains bicarbonate. Calculate the actual compensated [HCO3−][\text{HCO}_3^-] in mmol/L\text{mmol/L}, and find the difference between this actual value and what [HCO3−][\text{HCO}_3^-] would be if the kidneys achieved complete compensation back to pH=7.40\text{pH} = 7.40 ( pKa=6.10\,\text{p}K_a = 6.10, α=0.0300 mM/mmHg\alpha = 0.0300\text{ mM/mmHg}).

Answer

Actual [HCO3−]=32.0 mmol/L[\text{HCO}_3^-] = 32.0\text{ mmol/L}; fully compensated [HCO3−]=35.9 mmol/L[\text{HCO}_3^-] = 35.9\text{ mmol/L}; difference =3.9 mmol/L= 3.9\text{ mmol/L}. Key steps: Dissolved CO2=0.0300×60.0=1.80 mM\text{CO}_2 = 0.0300 \times 60.0 = 1.80\text{ mM}. Actual state uses measured pH=7.35\text{pH} = 7.35: [HCO3−]=1.80×107.35−6.10=1.80×101.25≈32.01 mmol/L[\text{HCO}_3^-] = 1.80 \times 10^{7.35 - 6.10} = 1.80 \times 10^{1.25} \approx 32.01\text{ mmol/L}. Complete target state uses pH=7.40\text{pH} = 7.40: [HCO3−]target=1.80×107.40−6.10=1.80×101.30≈35.91 mmol/L[\text{HCO}_3^-]_{\text{target}} = 1.80 \times 10^{7.40 - 6.10} = 1.80 \times 10^{1.30} \approx 35.91\text{ mmol/L}. Difference =35.91−32.01=3.90 mmol/L= 35.91 - 32.01 = 3.90\text{ mmol/L}.

Loading workspace…