Resources

An isothermal titration calorimetry (ITC) experiment is conducted at T=298 KT = 298\text{ K} to measure the thermodynamic parameters of ATP\text{ATP} hydrolysis by an engineered pyrophosphatase-coupled ATPase enzyme system in a 1.40 mL1.40\text{ mL} reaction cell. The baseline-corrected total heat released upon the complete enzymatic hydrolysis of an injected aliquot of 2.50×10−7 mol of ATP2.50\times 10^{-7}\text{ mol of ATP} is measured to be q=−5.15 mJq = -5.15\text{ mJ}. From independent equilibrium dialysis under the same buffer conditions (pH 7.2\text{pH } 7.2), the equilibrium constant is determined to be Keq′=2.25×105K^{\prime}_{\text{eq}} = 2.25\times 10^5. (a) Calculate the molar enthalpy of hydrolysis (ΔH∘′\Delta H^{\circ\prime}, in kJ/mol\text{kJ/mol}). (b) Calculate the standard Gibbs free energy change (ΔG∘′\Delta G^{\circ\prime}, in kJ/mol\text{kJ/mol}). (c) Calculate the standard entropy change (ΔS∘′\Delta S^{\circ\prime}, in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K})). Use R=8.314×10−3 kJ/(mol⋅K)R = 8.314\times 10^{-3}\text{ kJ}/(\text{mol}\cdot\text{K}).

Answer and steps

Final answer

(a) ΔH∘′=−20.6 kJ/mol\Delta H^{\circ\prime} = -20.6\text{ kJ/mol}; (b) ΔG∘′=−30.5 kJ/mol\Delta G^{\circ\prime} = -30.5\text{ kJ/mol}; (c) ΔS∘′=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = +33.2\text{ J}/(\text{mol}\cdot\text{K})

Steps

Part (a): Calculating the Molar Enthalpy of Hydrolysis (ΔH∘′\Delta H^{\circ\prime})

Enthalpy change (ΔH∘′\Delta H^{\circ\prime}) under constant pressure is directly proportional to the total heat (qq) exchanged during the complete reaction per mole of reactant consumed (nn):

ΔH∘′=qn\Delta H^{\circ\prime} = \frac{q}{n}

  1. Convert the heat released from millijoules (mJ\text{mJ}) to joules (J\text{J}): q=−5.15 mJ=−5.15×10−3 Jq = -5.15\text{ mJ} = -5.15\times 10^{-3}\text{ J}
  2. Divide by the moles of ATP\ce{ATP} hydrolyzed: ΔH∘′=−5.15×10−3 J2.50×10−7 mol=−2.06×104 J/mol\Delta H^{\circ\prime} = \frac{-5.15\times 10^{-3}\text{ J}}{2.50\times 10^{-7}\text{ mol}} = -2.06\times 10^4\text{ J/mol}
  3. Convert to kJ/mol\text{kJ/mol}: ΔH∘′=−2.06×104 J/mol1000 J/kJ=−20.6 kJ/mol\Delta H^{\circ\prime} = \frac{-2.06\times 10^4\text{ J/mol}}{1000\text{ J/kJ}} = -20.6\text{ kJ/mol}

Part (b): Calculating the Standard Gibbs Free Energy Change (ΔG∘′\Delta G^{\circ\prime})

The standard transformed Gibbs free energy change at biological standard state (pH 7.2\text{pH } 7.2) is related to the apparent equilibrium constant (Keq′K^{\prime}_{\text{eq}}) by:

ΔG∘′=−RTln⁡(Keq′)\Delta G^{\circ\prime} = -RT \ln(K^{\prime}_{\text{eq}})

  1. Compute the natural logarithm of the equilibrium constant: ln⁡(Keq′)=ln⁡(2.25×105)≈12.324\ln(K^{\prime}_{\text{eq}}) = \ln(2.25\times 10^5) \approx 12.324
  2. Substitute the values of RR, TT, and ln⁡(Keq′)\ln(K^{\prime}_{\text{eq}}): ΔG∘′=−(8.314×10−3 kJ/(mol⋅K))⋅(298 K)⋅12.324\Delta G^{\circ\prime} = -(8.314\times 10^{-3}\text{ kJ}/(\text{mol}\cdot\text{K})) \cdot (298\text{ K}) \cdot 12.324 ΔG∘′=−2.4776 kJ/mol⋅12.324≈−30.5 kJ/mol\Delta G^{\circ\prime} = -2.4776\text{ kJ/mol} \cdot 12.324 \approx -30.5\text{ kJ/mol}

Part (c): Calculating the Standard Entropy Change (ΔS∘′\Delta S^{\circ\prime})

The fundamental relationship connecting free energy, enthalpy, and entropy is:

ΔG∘′=ΔH∘′−TΔS∘′\Delta G^{\circ\prime} = \Delta H^{\circ\prime} - T\Delta S^{\circ\prime}

Rearranging to solve for the entropy change (ΔS∘′\Delta S^{\circ\prime}):

ΔS∘′=ΔH∘′−ΔG∘′T\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T}

  1. Substitute ΔH∘′=−20.6 kJ/mol\Delta H^{\circ\prime} = -20.6\text{ kJ/mol} and ΔG∘′=−30.5 kJ/mol\Delta G^{\circ\prime} = -30.5\text{ kJ/mol}: ΔS∘′=−20.6 kJ/mol−(−30.5 kJ/mol)298 K=+9.9 kJ/mol298 K\Delta S^{\circ\prime} = \frac{-20.6\text{ kJ/mol} - (-30.5\text{ kJ/mol})}{298\text{ K}} = \frac{+9.9\text{ kJ/mol}}{298\text{ K}} ΔS∘′≈+0.03322 kJ/(mol⋅K)\Delta S^{\circ\prime} \approx +0.03322\text{ kJ}/(\text{mol}\cdot\text{K})
  2. Convert the result into J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}): ΔS∘′=0.03322 kJ/(mol⋅K)×1000 J/kJ=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = 0.03322\text{ kJ}/(\text{mol}\cdot\text{K}) \times 1000\text{ J/kJ} = +33.2\text{ J}/(\text{mol}\cdot\text{K})

Common Pitfall: Ensure consistent units between ΔH∘′\Delta H^{\circ\prime} and ΔG∘′\Delta G^{\circ\prime} when calculating ΔS∘′\Delta S^{\circ\prime}. Forgetting to convert kJ\text{kJ} to J\text{J} in the final step is a frequent unit error.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets heat released as having a positive sign or drops the negative sign when calculating ΔH°′, propagating the wrong sign into the entropy calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔH∘′=5.15 mJ2.50×10−7 mol  ⟹  ΔH∘′=5.15×10−3 J2.50×10−7 mol=+20.6 kJ/mol\Delta H^{\circ\prime} = \frac{5.15\text{ mJ}}{2.50\times 10^{-7}\text{ mol}} \implies \Delta H^{\circ\prime} = \frac{5.15\times 10^{-3}\text{ J}}{2.50\times 10^{-7}\text{ mol}} = +20.6\text{ kJ/mol}

    Correct

    ΔH∘′=qn=−5.15×10−3 J2.50×10−7 mol=−20.6 kJ/mol\Delta H^{\circ\prime} = \frac{q}{n} = \frac{-5.15\times 10^{-3}\text{ J}}{2.50\times 10^{-7}\text{ mol}} = -20.6\text{ kJ/mol}

    Because heat is released to the surroundings during this exothermic hydrolysis reaction, the heat exchange has a negative sign (q=−5.15 mJq = -5.15\text{ mJ}). Dividing a negative heat by moles gives ΔH∘′=−20.6 kJ/mol\Delta H^{\circ\prime} = -20.6\text{ kJ/mol}.

  2. Step 2

    ΔG∘′=−RTln⁡(Keq′)  ⟹  −(8.314×10−3)(298)ln⁡(2.25×105)=−30.5 kJ/mol\Delta G^{\circ\prime} = -RT \ln(K^{\prime}_{\text{eq}}) \implies -(8.314\times 10^{-3})(298)\ln(2.25\times 10^5) = -30.5\text{ kJ/mol}

  3. Step 3

    ΔS∘′=ΔH∘′−ΔG∘′T  ⟹  (20.6−(−30.53))×103298=+172 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T} \implies \frac{(20.6 - (-30.53))\times 10^3}{298} = +172\text{ J}/(\text{mol}\cdot\text{K})

    Correct

    ΔS∘′=ΔH∘′−ΔG∘′T=(−20.6 kJ/mol−(−30.5 kJ/mol))×1000 J/kJ298 K=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T} = \frac{(-20.6\text{ kJ/mol} - (-30.5\text{ kJ/mol}))\times 1000\text{ J/kJ}}{298\text{ K}} = +33.2\text{ J}/(\text{mol}\cdot\text{K})

    Your algebraic rearrangement and unit conversion for ΔS∘′\Delta S^{\circ\prime} were executed correctly, but substituting your positive ΔH∘′=+20.6 kJ/mol\Delta H^{\circ\prime} = +20.6\text{ kJ/mol} instead of −20.6 kJ/mol-20.6\text{ kJ/mol} produced an inflated value of +172 J/(mol⋅K)+172\text{ J}/(\text{mol}\cdot\text{K}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used ΔG∘′=−RTln⁡(Keq′)\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}) to evaluate standard free energy.

You correctly rearranged ΔG∘′=ΔH∘′−TΔS∘′\Delta G^{\circ\prime} = \Delta H^{\circ\prime} - T\Delta S^{\circ\prime} to isolate ΔS∘′\Delta S^{\circ\prime}.

You converted units properly between kJ\text{kJ} and J\text{J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Thermodynamic sign convention for enthalpy

You dropped the negative sign on qq when calculating ΔH∘′\Delta H^{\circ\prime}, treating heat released as positive.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the thermodynamic sign convention that heat transferred from the reaction system to the surroundings represents an exothermic process where both q<0q < 0 and ΔH<0\Delta H < 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Heat sign convention
  • Heat released by the system means q<0q < 0 and ΔH<0\Delta H < 0 (exothermic); heat absorbed means q>0q > 0 and ΔH>0\Delta H > 0 (endothermic).

  • Inspect the problem statement for phrases like 'heat released' or 'exothermic' and verify that qq and ΔH\Delta H are assigned negative values before proceeding.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the signed heat value: q=−5.15×10−3 Jq = -5.15\times 10^{-3}\text{ J}.

  2. Calculate standard molar enthalpy: ΔH∘′=−5.15×10−3 J2.50×10−7 mol=−2.06×104 J/mol=−20.6 kJ/mol\Delta H^{\circ\prime} = \frac{-5.15\times 10^{-3}\text{ J}}{2.50\times 10^{-7}\text{ mol}} = -2.06\times 10^4\text{ J/mol} = -20.6\text{ kJ/mol}.

  3. Keep ΔG∘′=−30.5 kJ/mol\Delta G^{\circ\prime} = -30.5\text{ kJ/mol}.

  4. Substitute into entropy formula: ΔS∘′=−20.6 kJ/mol−(−30.5 kJ/mol)298 K=+9.9 kJ/mol298 K≈+0.0332 kJ/(mol⋅K)=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{-20.6\text{ kJ/mol} - (-30.5\text{ kJ/mol})}{298\text{ K}} = \frac{+9.9\text{ kJ/mol}}{298\text{ K}} \approx +0.0332\text{ kJ}/(\text{mol}\cdot\text{K}) = +33.2\text{ J}/(\text{mol}\cdot\text{K}).

Final answer

(a) ΔH∘′=−20.6 kJ/mol\Delta H^{\circ\prime} = -20.6\text{ kJ/mol}; (b) ΔG∘′=−30.5 kJ/mol\Delta G^{\circ\prime} = -30.5\text{ kJ/mol}; (c) ΔS∘′=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = +33.2\text{ J}/(\text{mol}\cdot\text{K})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the sign convention for heat exchange in calorimetry problems.

  • Always double-check that 'heat evolved' or 'heat released' enters your enthalpy equation with an explicit minus sign.

  • Practice recalculating ΔS∘′\Delta S^{\circ\prime} when ΔH∘′\Delta H^{\circ\prime} and ΔG∘′\Delta G^{\circ\prime} have the same negative sign.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the negative sign in the thermodynamic relationship ΔG°′ = -RT ln(K′eq), finding a positive Gibbs free energy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔH∘′=−5.15×10−3 J(2.50×10−7 mol)=−20.6 kJ/mol\Delta H^{\circ\prime} = -5.15\times 10^{-3}\text{ }\frac{\text{J}}{(2.50\times 10^{-7}\text{ mol})} = -20.6\text{ kJ/mol}

  2. Step 2

    ΔG∘′=RTln⁡(Keq′)  ⟹  ΔG∘′=(8.314×10−3 kJ/(mol⋅K))(298 K)ln⁡(2.25×105)=+30.5 kJ/mol\Delta G^{\circ\prime} = RT\ln(K^{\prime}_{\text{eq}}) \implies \Delta G^{\circ\prime} = (8.314\times 10^{-3}\text{ kJ/(mol}\cdot\text{K}))(298\text{ K})\ln(2.25\times 10^5) = +30.5\text{ kJ/mol}

    Correct

    ΔG∘′=−RTln⁡(Keq′)=−(8.314×10−3 kJ/(mol⋅K))(298 K)ln⁡(2.25×105)=−30.5 kJ/mol\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}) = -(8.314\times 10^{-3}\text{ kJ/(mol}\cdot\text{K}))(298\text{ K})\ln(2.25\times 10^5) = -30.5\text{ kJ/mol}

    You omitted the negative sign in the relationship ΔG∘′=−RTln⁡(Keq′)\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}). Because Keq′>1K^{\prime}_{\text{eq}} > 1, the reaction is thermodynamically favorable and must yield a negative standard Gibbs free energy change (−30.5 kJ/mol−30.5\text{ kJ/mol}).

  3. Step 3

    ΔS∘′=ΔH∘′−ΔG∘′T  ⟹  ΔS∘′=(−20.6−30.53)×103298=−172 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T} \implies \Delta S^{\circ\prime} = \frac{(-20.6 - 30.53)\times 10^3}{298} = -172\text{ J/(mol}\cdot\text{K})

    Correct

    ΔS∘′=ΔH∘′−ΔG∘′T=−20.6−(−30.5)298×103=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T} = \frac{-20.6 - (-30.5)}{298}\times 10^3 = +33.2\text{ J/(mol}\cdot\text{K})

    Your algebraic rearrangement and unit scaling factor (103 J/kJ10^3\text{ J/kJ}) were completely sound, but substituting your positive ΔG∘′\Delta G^{\circ\prime} from part (b) led to an incorrect negative entropy value.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the molar enthalpy of hydrolysis with correct units and proper sign conventions in part (a).

You correctly recalled and rearranged the Gibbs-Helmholtz relation ΔG∘′=ΔH∘′−TΔS∘′\Delta G^{\circ\prime} = \Delta H^{\circ\prime} - T\Delta S^{\circ\prime} to solve for ΔS∘′\Delta S^{\circ\prime}.

You applied the correct unit conversion factor from kilojoules to joules when computing entropy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in thermodynamic equilibrium formula

You dropped the negative sign in the definition ΔG∘′=−RTln⁡(Keq′)\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}), resulting in a positive value for an exergonic reaction.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the equilibrium condition where ΔG=0=ΔG∘′+RTln⁡(Keq′)\Delta G = 0 = \Delta G^{\circ\prime} + RT\ln(K^{\prime}_{\text{eq}}) causes the isolated standard free energy change ΔG∘′\Delta G^{\circ\prime} to lose its negative sign.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Spontaneity vs. Equilibrium Constant
  • When Keq>1K_{\text{eq}} > 1, products are favored at equilibrium, meaning the forward reaction is exergonic under standard conditions: ΔG∘′<0\Delta G^{\circ\prime} < 0.

  • Always verify that if Keq′>1K^{\prime}_{\text{eq}} > 1, your calculated ΔG∘′\Delta G^{\circ\prime} comes out negative.

Derive from the Total Free Energy Equation
  • At equilibrium, ΔG=ΔG∘′+RTln⁡(Q)=0\Delta G = \Delta G^{\circ\prime} + RT\ln(Q) = 0, where Q=Keq′Q = K^{\prime}_{\text{eq}}.

  • Rearrange ΔG∘′+RTln⁡(Keq′)=0\Delta G^{\circ\prime} + RT\ln(K^{\prime}_{\text{eq}}) = 0 directly to arrive at ΔG∘′=−RTln⁡(Keq′)\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the required negative sign: ΔG∘′=−RTln⁡(Keq′)\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}).

  2. Evaluate ΔG∘′=−(8.314×10−3 kJ/(mol⋅K))(298 K)ln⁡(2.25×105)=−30.5 kJ/mol\Delta G^{\circ\prime} = -(8.314\times 10^{-3}\text{ kJ/(mol}\cdot\text{K}))(298\text{ K})\ln(2.25\times 10^5) = -30.5\text{ kJ/mol}.

  3. Substitute the corrected ΔG∘′\Delta G^{\circ\prime} into part (c): ΔS∘′=−20.6 kJ/mol−(−30.5 kJ/mol)298 K=+9.9 kJ/mol298 K\Delta S^{\circ\prime} = \frac{-20.6\text{ kJ/mol} - (-30.5\text{ kJ/mol})}{298\text{ K}} = \frac{+9.9\text{ kJ/mol}}{298\text{ K}}.

  4. Multiply by 1000 J/kJ1000\text{ J/kJ} to obtain ΔS∘′=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = +33.2\text{ J/(mol}\cdot\text{K}).

Final answer

(a) ΔH∘′=−20.6 kJ/mol\Delta H^{\circ\prime} = -20.6\text{ kJ/mol}; (b) ΔG∘′=−30.5 kJ/mol\Delta G^{\circ\prime} = -30.5\text{ kJ/mol}; (c) ΔS∘′=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = +33.2\text{ J/(mol}\cdot\text{K})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the equilibrium derivation ΔG=ΔG∘+RTln⁡(Q)=0\Delta G = \Delta G^{\circ} + RT\ln(Q) = 0 to anchor the negative sign permanently.

  • Perform a sanity check on thermodynamic signs before moving on: an equilibrium constant K>1K > 1 must always correspond to ΔG∘<0\Delta G^{\circ} < 0.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert ΔH°′ and ΔG°′ from kilojoules to joules when calculating ΔS°′ in J/(mol·K), resulting in a value off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔH∘′=−5.15×10−3 J2.50×10−7 mol=−20.6 kJ/mol\Delta H^{\circ\prime} = \frac{-5.15\times 10^{-3}\text{ J}}{2.50\times 10^{-7}\text{ mol}} = -20.6\text{ kJ/mol}

  2. Step 2

    ΔG∘′=−RTln⁡(Keq′)=−(8.314×10−3)(298)ln⁡(2.25×105)=−30.5 kJ/mol\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}) = -(8.314\times 10^{-3})(298)\ln(2.25\times 10^5) = -30.5\text{ kJ/mol}

  3. Step 3

    ΔS∘′=ΔH∘′−ΔG∘′T⟹ΔS∘′=−20.6−(−30.53)298=+0.0333 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T} ⟹ \Delta S^{\circ\prime} = \frac{-20.6 - (-30.53)}{298} = +0.0333\text{ J}/(\text{mol}\cdot\text{K})

    Correct

    ΔS∘′=ΔH∘′−ΔG∘′T=−20.6 kJ/mol−(−30.5 kJ/mol)298 K=+0.03322 kJ/(mol⋅K)×1000 J/kJ=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T} = \frac{-20.6\text{ kJ/mol} - (-30.5\text{ kJ/mol})}{298\text{ K}} = +0.03322\text{ kJ}/(\text{mol}\cdot\text{K}) \times 1000\text{ J/kJ} = +33.2\text{ J}/(\text{mol}\cdot\text{K})

    You rearranged the formula correctly, but your substituted enthalpy and free energy values were in kJ/mol\text{kJ/mol}, which yields an entropy value in kJ/(mol⋅K)\text{kJ}/(\text{mol}\cdot\text{K}). You needed to multiply by 1000 J/kJ1000\text{ J/kJ} to express the final answer in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted millijoules to joules and determined the molar enthalpy of hydrolysis.

You correctly computed ΔG∘′\Delta G^{\circ\prime} from the equilibrium constant using the gas constant in kJ/(mol⋅K)\text{kJ}/(\text{mol}\cdot\text{K}).

You correctly rearranged ΔG∘′=ΔH∘′−TΔS∘′\Delta G^{\circ\prime} = \Delta H^{\circ\prime} - T\Delta S^{\circ\prime} to isolate ΔS∘′\Delta S^{\circ\prime}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Thermodynamic Unit Mismatch (kJ to J)

You wrote J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}) as the unit for a numerical value calculated directly from values given in kJ/mol\text{kJ/mol}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit tracking across composite thermodynamic equations: ΔH\Delta H and ΔG\Delta G are typically tabulated in kJ/mol\text{kJ/mol}, whereas ΔS\Delta S is conventionally reported in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K}). When calculating ΔS\Delta S from ΔH−ΔGT\frac{\Delta H - \Delta G}{T}, the quotient has units of kJ/(mol⋅K)\text{kJ}/(\text{mol}\cdot\text{K}) and requires an explicit conversion factor of 1000 J/kJ1000\text{ J/kJ}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track explicit units in quotients
  • kJ/molK=kJ/(mol⋅K)\frac{\text{kJ/mol}}{\text{K}} = \text{kJ}/(\text{mol}\cdot\text{K})

  • Write units inside the numerator and denominator during calculation, or convert ΔH∘′\Delta H^{\circ\prime} and ΔG∘′\Delta G^{\circ\prime} to J/mol\text{J/mol} before dividing by temperature.

Verify standard entropy scale
  • Standard biochemical reaction entropy changes typically range between ±10\pm 10 and ±200 J/(mol⋅K)\pm 200\text{ J}/(\text{mol}\cdot\text{K}).

  • If your calculated ΔS\Delta S is on the order of 0.01 to 0.10.01\text{ to }0.1, check whether you forgot to multiply by 10310^3 to convert from kJ\text{kJ} to J\text{J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the free energy and enthalpy differences to joules: ΔH∘′−ΔG∘′=−20.6 kJ/mol−(−30.5 kJ/mol)=+9.9 kJ/mol=+9900 J/mol\Delta H^{\circ\prime} - \Delta G^{\circ\prime} = -20.6\text{ kJ/mol} - (-30.5\text{ kJ/mol}) = +9.9\text{ kJ/mol} = +9900\text{ J/mol}.

  2. Divide by temperature: ΔS∘′=+9900 J/mol298 K≈+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{+9900\text{ J/mol}}{298\text{ K}} \approx +33.2\text{ J}/(\text{mol}\cdot\text{K}).

Final answer

(a) ΔH∘′=−20.6 kJ/mol\Delta H^{\circ\prime} = -20.6\text{ kJ/mol}; (b) ΔG∘′=−30.5 kJ/mol\Delta G^{\circ\prime} = -30.5\text{ kJ/mol}; (c) ΔS∘′=+33.2 J/(mol⋅K)\Delta S^{\circ\prime} = +33.2\text{ J}/(\text{mol}\cdot\text{K})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down unit labels alongside numbers in your scratch work when calculating entropy from ΔG\Delta G and ΔH\Delta H.

  • Adopt the habit of converting ΔH\Delta H and ΔG\Delta G to J/mol\text{J/mol} before evaluating ΔS=ΔH−ΔGT\Delta S = \frac{\Delta H - \Delta G}{T}.

Lock it in

Similar question

01

A calorimeter detects 3.20 mJ3.20\text{ mJ} of heat released upon the complete hydrolysis of 1.60×10−7 mol1.60\times 10^{-7}\text{ mol} of a phosphorylated intermediate at 298 K298\text{ K}. Calculate the molar enthalpy of hydrolysis ΔH∘′\Delta H^{\circ\prime} in kJ/mol\text{kJ/mol}.

Answer

ΔH∘′=−20.0 kJ/mol\Delta H^{\circ\prime} = -20.0\text{ kJ/mol}. Key steps: Because heat is released, q=−3.20×10−3 Jq = -3.20\times 10^{-3}\text{ J}. Then ΔH∘′=−3.20×10−3 J1.60×10−7 mol=−2.00×104 J/mol=−20.0 kJ/mol\Delta H^{\circ\prime} = \frac{-3.20\times 10^{-3}\text{ J}}{1.60\times 10^{-7}\text{ mol}} = -2.00\times 10^4\text{ J/mol} = -20.0\text{ kJ/mol}.

02

The enzymatic hydrolysis of a substrate at 298 K298\text{ K} has ΔH∘′=−18.4 kJ/mol\Delta H^{\circ\prime} = -18.4\text{ kJ/mol} and an equilibrium constant Keq′=4.50×104K^{\prime}_{\text{eq}} = 4.50\times 10^4. Calculate ΔG∘′\Delta G^{\circ\prime} (in kJ/mol\text{kJ/mol}) and ΔS∘′\Delta S^{\circ\prime} (in J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K})). Use R=8.314×10−3 kJ/(mol⋅K)R = 8.314\times 10^{-3}\text{ kJ}/(\text{mol}\cdot\text{K}).

Answer

ΔG∘′=−26.5 kJ/mol\Delta G^{\circ\prime} = -26.5\text{ kJ/mol}; ΔS∘′=+27.2 J/(mol⋅K)\Delta S^{\circ\prime} = +27.2\text{ J}/(\text{mol}\cdot\text{K}). Key steps: ΔG∘′=−RTln⁡(Keq′)=−(8.314×10−3)(298)ln⁡(4.50×104)≈−26.54 kJ/mol\Delta G^{\circ\prime} = -RT\ln(K^{\prime}_{\text{eq}}) = -(8.314\times 10^{-3})(298)\ln(4.50\times 10^4) \approx -26.54\text{ kJ/mol}. Then ΔS∘′=ΔH∘′−ΔG∘′T=−18.4−(−26.54)298×1000≈+27.2 J/(mol⋅K)\Delta S^{\circ\prime} = \frac{\Delta H^{\circ\prime} - \Delta G^{\circ\prime}}{T} = \frac{-18.4 - (-26.54)}{298}\times 1000 \approx +27.2\text{ J}/(\text{mol}\cdot\text{K}).

03

In an isothermal titration calorimetry experiment at 310 K310\text{ K}, injecting 5.00×10−8 mol5.00\times 10^{-8}\text{ mol} of ligand into a protein solution causes an endothermic binding event that absorbs 1.45 mJ1.45\text{ mJ} of heat. If the binding constant is Ka=8.00×105K_a = 8.00\times 10^5, determine ΔH∘\Delta H^{\circ}, ΔG∘\Delta G^{\circ}, and ΔS∘\Delta S^{\circ} (in kJ/mol\text{kJ/mol}, kJ/mol\text{kJ/mol}, and J/(mol⋅K)\text{J}/(\text{mol}\cdot\text{K})). Use R=8.314×10−3 kJ/(mol⋅K)R = 8.314\times 10^{-3}\text{ kJ}/(\text{mol}\cdot\text{K}).

Answer

ΔH∘=+29.0 kJ/mol\Delta H^{\circ} = +29.0\text{ kJ/mol}; ΔG∘=−35.0 kJ/mol\Delta G^{\circ} = -35.0\text{ kJ/mol}; ΔS∘=+206 J/(mol⋅K)\Delta S^{\circ} = +206\text{ J}/(\text{mol}\cdot\text{K}). Key steps: Heat is absorbed, so q=+1.45×10−3 Jq = +1.45\times 10^{-3}\text{ J} and ΔH∘=+1.45×10−3 J5.00×10−8 mol=+29.0 kJ/mol\Delta H^{\circ} = \frac{+1.45\times 10^{-3}\text{ J}}{5.00\times 10^{-8}\text{ mol}} = +29.0\text{ kJ/mol}. Free energy: ΔG∘=−RTln⁡(Ka)=−(8.314×10−3)(310)ln⁡(8.00×105)≈−35.03 kJ/mol\Delta G^{\circ} = -RT\ln(K_a) = -(8.314\times 10^{-3})(310)\ln(8.00\times 10^5) \approx -35.03\text{ kJ/mol}. Entropy: ΔS∘=+29.0−(−35.03)310×1000≈+206.5 J/(mol⋅K)\Delta S^{\circ} = \frac{+29.0 - (-35.03)}{310}\times 1000 \approx +206.5\text{ J}/(\text{mol}\cdot\text{K}).

Loading workspace…