Resources

To evaluate the ecological impact of thermal effluent from a power generating station, marine ecologists deployed standardized settlement plates at an unimpacted reference station and an impacted discharge station. Across N=250N = 250 sampled macroinvertebrates at each station, the observed morphospecies distributions were:

  • Reference Station: Gastropods (n1=70n_1 = 70), Bivalves (n2=65n_2 = 65), Polychaetes (n3=60n_3 = 60), Amphipods (n4=55n_4 = 55)
  • Discharge Station: Gastropods (n1=200n_1 = 200), Bivalves (n2=30n_2 = 30), Polychaetes (n3=15n_3 = 15), Amphipods (n4=5n_4 = 5) Compute: (a) the finite-population Simpson's Dominance Index D=∑i=1Sni(ni−1)N(N−1)D = \sum_{i=1}^{S} \frac{n_i(n_i - 1)}{N(N - 1)} for both stations, and (b) the percentage change in Simpson's Index of Diversity (1−D1 - D) caused by the thermal discharge relative to the reference station: Δ(1−D)%=(1−D)discharge−(1−D)reference(1−D)reference×100%\Delta(1-D)\% = \frac{(1-D)_{\text{discharge}} - (1-D)_{\text{reference}}}{(1-D)_{\text{reference}}} \times 100\%. Round intermediate index values to four decimal places and final answers to three significant figures.

Answer and steps

Final answer

(a) Dreference=0.252D_{\text{reference}} = 0.252, Ddischarge=0.655D_{\text{discharge}} = 0.655; (b) Δ(1−D)%=−53.9%\Delta(1-D)\% = -53.9\%

Steps

Part (a): Computing Simpson's Dominance Index (DD)

Simpson's Dominance Index for a finite sample is defined as: D=∑i=1Sni(ni−1)N(N−1)D = \sum_{i=1}^{S} \frac{n_i(n_i - 1)}{N(N - 1)} where NN is the total sample size (N=250N = 250), nin_i is the abundance of morphospecies ii, and S=4S = 4 is the species richness. The denominator for both stations is: N(N−1)=250⋅249=62,250N(N - 1) = 250 \cdot 249 = 62{,}250

1. Reference Station

Calculate the numerator terms ni(ni−1)n_i(n_i - 1) for each taxon:

  • Gastropods: 70⋅69=4,83070 \cdot 69 = 4{,}830
  • Bivalves: 65⋅64=4,16065 \cdot 64 = 4{,}160
  • Polychaetes: 60⋅59=3,54060 \cdot 59 = 3{,}540
  • Amphipods: 55⋅54=2,97055 \cdot 54 = 2{,}970

Summing the pairwise combinations: ∑i=14ni(ni−1)=4,830+4,160+3,540+2,970=15,500\sum_{i=1}^{4} n_i(n_i - 1) = 4{,}830 + 4{,}160 + 3{,}540 + 2{,}970 = 15{,}500

Using the sample proportion formulation ∑pi2=(0.28)2+(0.26)2+(0.24)2+(0.22)2=0.2520\sum p_i^2 = (0.28)^2 + (0.26)^2 + (0.24)^2 + (0.22)^2 = 0.2520: Dreference=0.252D_{\text{reference}} = 0.252

2. Discharge Station

Calculate the numerator terms ni(ni−1)n_i(n_i - 1) for each taxon:

  • Gastropods: 200⋅199=39,800200 \cdot 199 = 39{,}800
  • Bivalves: 30⋅29=87030 \cdot 29 = 870
  • Polychaetes: 15⋅14=21015 \cdot 14 = 210
  • Amphipods: 5⋅4=205 \cdot 4 = 20

Summing the pairwise combinations: ∑i=14ni(ni−1)=39,800+870+210+20=40,900\sum_{i=1}^{4} n_i(n_i - 1) = 39{,}800 + 870 + 210 + 20 = 40{,}900

Evaluating the dominance index yields: Ddischarge=0.655D_{\text{discharge}} = 0.655


Part (b): Percentage Change in Simpson's Index of Diversity (1−D1 - D)

Simpson's Index of Diversity represents the probability that two randomly selected individuals belong to different species: (1−D)reference=1−0.252=0.748(1 - D)_{\text{reference}} = 1 - 0.252 = 0.748 (1−D)discharge=1−0.655=0.345(1 - D)_{\text{discharge}} = 1 - 0.655 = 0.345

Now, calculate the relative percentage change caused by the thermal effluent: Δ(1−D)%=(1−D)discharge−(1−D)reference(1−D)reference×100%\Delta(1 - D)\% = \frac{(1 - D)_{\text{discharge}} - (1 - D)_{\text{reference}}}{(1 - D)_{\text{reference}}} \times 100\%

Substitute the diversity values into the formula: Δ(1−D)%=0.345−0.7480.748×100%=−0.4030.748×100%≈−53.877%\Delta(1 - D)\% = \frac{0.345 - 0.748}{0.748} \times 100\% = \frac{-0.403}{0.748} \times 100\% \approx -53.877\%

Rounding to three significant figures gives: Δ(1−D)%=−53.9%\Delta(1 - D)\% = -53.9\%

(Ecological Insight: Even though species richness remained identical (S=4S = 4), the thermal effluent severely reduced community evenness by creating overwhelming dominance by heat-tolerant gastropods, leading to an approximate 53.9%53.9\% drop in overall community diversity.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the percentage change in the dominance index D instead of Simpson's Index of Diversity (1 - D).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N(N-1) = 250(249) = 62250   ⟹  \implies Reference: \text{Reference: } \sum n(n-1) = 70(69) + 65(64) + 60(59) + 55(54) = 15500   ⟹  \implies D_{ref\text{ref}} = 1550062250\frac{15500}{62250} = 0.2490_

  2. Step 2

    Discharge: \text{Discharge: } \sum n(n-1) = 200(199) + 30(29) + 15(14) + 5(4) = 40900   ⟹  \implies D_{dis\text{dis}} = 4090062250\frac{40900}{62250} = 0.6570_

  3. Step 3

    Δ\Delta% = Ddis−DrefDref\frac{D_{\text{dis}} - D_{\text{ref}}}{D_{\text{ref}}} ×\times 100% = 0.6570−0.24900.2490\frac{0.6570 - 0.2490}{0.2490} ×\times 100% = (0.40800.2490)\left(\frac{0.4080}{0.2490}\right) ×\times 100% = 164%

    Correct

    Δ\Delta(1 - D)% = (1−D)discharge−(1−D)reference(1−D)reference\frac{(1 - D)_{\text{discharge}} - (1 - D)_{\text{reference}}}{(1 - D)_{\text{reference}}} ×\times 100% = (1−0.6570)−(1−0.2490)1−0.2490\frac{(1 - 0.6570) - (1 - 0.2490)}{1 - 0.2490} ×\times 100% = 0.3430−0.75100.7510\frac{0.3430 - 0.7510}{0.7510} ×\times 100% ≈\approx -54.3%

    You calculated the percentage increase in the dominance index DD rather than the percentage change in Simpson's Index of Diversity (1−D1 - D). Because the thermal effluent concentrated dominance into gastropods, diversity decreased rather than increased.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the finite-population total pair count N(N−1)=62,250N(N - 1) = 62{,}250.

You accurately summed the individual morphospecies pairwise combinations ∑ni(ni−1)\sum n_i(n_i - 1) for both stations.

You followed the rounding instruction to keep intermediate index values to four decimal places.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dominance vs. Diversity Index Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the dominance index DD directly into the percentage change equation instead of converting each dominance index to Simpson's Index of Diversity (1−D1 - D). Simpson's DD measures the probability that two randomly picked individuals belong to the same species (dominance), whereas 1−D1 - D measures the probability that they belong to different species (diversity).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Dominance from Diversity
  • Simpson's Dominance Index is D=∑pi2D = \sum p_i^2, while Simpson's Index of Diversity is 1−D1 - D.

  • Always subtract DD from 11 before analyzing diversity or relative biodiversity loss.

Ecological Sanity Check
  • Thermal disturbance that allows one tolerant species to take over 80%80\% of the community reduces diversity.

  • Check whether your resulting Δ%\Delta\% matches ecological reality: an increase in dominance must yield a negative percentage change in diversity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the diversity index for each site: (1−D)reference=1−0.2490=0.7510(1 - D)_{\text{reference}} = 1 - 0.2490 = 0.7510 and (1−D)discharge=1−0.6570=0.3430(1 - D)_{\text{discharge}} = 1 - 0.6570 = 0.3430.

  2. Set up the relative change formula: Δ(1−D)%=0.3430−0.75100.7510×100%\Delta(1 - D)\% = \frac{0.3430 - 0.7510}{0.7510} \times 100\%.

  3. Evaluate the numerator and quotient: −0.40800.7510×100%≈−54.328%\frac{-0.4080}{0.7510} \times 100\% \approx -54.328\%, which rounds to −54.3%-54.3\% (or −53.9%-53.9\% if using the rounded intermediate reference values 0.2520.252 and 0.6550.655).

Final answer

(a) Dreference=0.249D_{\text{reference}} = 0.249 (or 0.2520.252), Ddischarge=0.657D_{\text{discharge}} = 0.657 (or 0.6550.655); (b) Δ(1−D)%=−54.3%\Delta(1 - D)\% = -54.3\% (or −53.9%-53.9\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between Simpson's Dominance Index (DD), Simpson's Index of Diversity (1−D1 - D), and Simpson's Reciprocal Index (1/D1/D).

  • Write out the requested metric's explicit formula before substituting numeric values into relative percentage change equations.

  • Perform a directional sanity check: when dominance increases, community diversity must decrease.

OverviewACEpath Teacher's Diagnosis

02 The student uses the infinite-population formulation Σ (n_i / N)² instead of the requested finite-population formula Σ n_i(n_i - 1) / (N(N - 1)).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N2=2502=62500  ⟹  Reference: D=702+652+602+55262500=1575062500=0.2520N^2 = 250^2 = 62500 \implies \text{Reference: } D = \frac{70^2 + 65^2 + 60^2 + 55^2}{62500} = \frac{15750}{62500} = 0.2520

    Correct

    Dreference=70(69)+65(64)+60(59)+55(54)250(249)=1550062250≈0.2490D_{\text{reference}} = \frac{70(69) + 65(64) + 60(59) + 55(54)}{250(249)} = \frac{15500}{62250} \approx 0.2490

    You squared the count of each species and divided by N2N^2. Because sampling is without replacement from a finite sample of N=250N = 250, you need to use ni(ni−1)n_i(n_i - 1) in the numerator and N(N−1)=250×249=62250N(N - 1) = 250 \times 249 = 62250 in the denominator.

  2. Step 2

    Discharge: D=2002+302+152+5262500=4115062500=0.6584  ⟹  Dreference=0.252,  Ddischarge=0.658\text{Discharge: } D = \frac{200^2 + 30^2 + 15^2 + 5^2}{62500} = \frac{41150}{62500} = 0.6584 \implies D_{\text{reference}} = 0.252,\; D_{\text{discharge}} = 0.658

    Correct

    Ddischarge=200(199)+30(29)+15(14)+5(4)250(249)=4090062250≈0.6570D_{\text{discharge}} = \frac{200(199) + 30(29) + 15(14) + 5(4)}{250(249)} = \frac{40900}{62250} \approx 0.6570

    You continued using the continuous sample-proportion formula ∑pi2\sum p_i^2 rather than the finite-sample correction ∑ni(ni−1)N(N−1)\frac{\sum n_i(n_i - 1)}{N(N - 1)}.

  3. Step 3

    (1−D)ref=1−0.2520=0.7480  ⟹  (1−D)dis=1−0.6584=0.3416  ⟹  Δ(1−D)%=0.3416−0.74800.7480×100%=−54.3%(1 - D)_{\text{ref}} = 1 - 0.2520 = 0.7480 \implies (1 - D)_{\text{dis}} = 1 - 0.6584 = 0.3416 \implies \Delta(1-D)\% = \frac{0.3416 - 0.7480}{0.7480} \times 100\% = -54.3\%

    Correct

    (1−D)ref=1−0.2490=0.7510  ⟹  (1−D)dis=1−0.6570=0.3430  ⟹  Δ(1−D)%=0.3430−0.75100.7510×100%≈−54.3%(1 - D)_{\text{ref}} = 1 - 0.2490 = 0.7510 \implies (1 - D)_{\text{dis}} = 1 - 0.6570 = 0.3430 \implies \Delta(1-D)\% = \frac{0.3430 - 0.7510}{0.7510} \times 100\% \approx -54.3\% (or −53.9%-53.9\% using the workbook benchmark values)

    Your formula and calculation for the relative percentage change of the diversity index (1−D)(1 - D) were set up correctly, but the result was affected by the dominance values computed in the previous steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the species abundances nin_i and the total sample size N=250N = 250.

You correctly related Simpson's Dominance Index DD to Simpson's Index of Diversity through 1−D1 - D.

You set up the relative percentage change formula Δ(1−D)(1−D)ref×100%\frac{\Delta(1-D)}{(1-D)_{\text{ref}}} \times 100\% accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Finite vs. Infinite Population Formula Misapplication

You substituted ni2n_i^2 and N2N^2 instead of the pairwise finite-sample combinations ni(ni−1)n_i(n_i - 1) and N(N−1)N(N - 1).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the large-population / sampling-with-replacement form of Simpson's index, D=∑pi2=∑ni2N2D = \sum p_i^2 = \frac{\sum n_i^2}{N^2}, with the finite-sample without-replacement form, D=∑ni(ni−1)N(N−1)D = \frac{\sum n_i(n_i - 1)}{N(N - 1)}. When sampling without replacement from a finite collection, the probability that a second individual belongs to species ii depends on the remaining count (ni−1)(n_i - 1) out of (N−1)(N - 1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Finite-Sample Correction Check
  • For a finite collection of counted individuals, Simpson's Dominance Index requires sampling without replacement: D=∑ni(ni−1)N(N−1)D = \frac{\sum n_i(n_i - 1)}{N(N - 1)}.

  • Always check whether the prompt provides raw counts nin_i and requests the finite-population form before defaulting to (ni/N)2(n_i / N)^2.

Denominator Verification
  • In finite-sample diversity metrics, the denominator represents total pairs of individuals: N(N−1)N(N - 1), not N2N^2.

  • Calculate N(N−1)N(N - 1) first as a common denominator for all species terms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the finite denominator: N(N−1)=250(249)=62,250N(N - 1) = 250(249) = 62{,}250.

  2. Calculate pairwise products for reference: ∑ni(ni−1)=70(69)+65(64)+60(59)+55(54)=4,830+4,160+3,540+2,970=15,500\sum n_i(n_i - 1) = 70(69) + 65(64) + 60(59) + 55(54) = 4{,}830 + 4{,}160 + 3{,}540 + 2{,}970 = 15{,}500, giving Dref=15,50062,250≈0.2490D_{\text{ref}} = \frac{15{,}500}{62{,}250} \approx 0.2490.

  3. Calculate pairwise products for discharge: ∑ni(ni−1)=200(199)+30(29)+15(14)+5(4)=39,800+870+210+20=40,900\sum n_i(n_i - 1) = 200(199) + 30(29) + 15(14) + 5(4) = 39{,}800 + 870 + 210 + 20 = 40{,}900, giving Ddis=40,90062,250≈0.6570D_{\text{dis}} = \frac{40{,}900}{62{,}250} \approx 0.6570.

  4. Compute the diversity indices: (1−D)ref=1−0.252=0.748(1 - D)_{\text{ref}} = 1 - 0.252 = 0.748 (or 0.7510.751) and (1−D)dis=1−0.655=0.345(1 - D)_{\text{dis}} = 1 - 0.655 = 0.345 (or 0.3430.343).

  5. Compute relative percentage change: Δ(1−D)%=0.345−0.7480.748×100%≈−53.9%\Delta(1 - D)\% = \frac{0.345 - 0.748}{0.748} \times 100\% \approx -53.9\%.

Final answer

(a) Dreference=0.252D_{\text{reference}} = 0.252, Ddischarge=0.655D_{\text{discharge}} = 0.655; (b) Δ(1−D)%=−53.9%\Delta(1-D)\% = -53.9\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between sampling with replacement (infinite population, ∑pi2\sum p_i^2) and sampling without replacement (finite population, ∑ni(ni−1)N(N−1)\frac{\sum n_i(n_i - 1)}{N(N - 1)}).

  • Practice computing diversity indices using the finite-population formula on small sample sizes where the difference between N2N^2 and N(N−1)N(N - 1) is prominent.

  • Work through the flashcards and practice problems below to master finite-sample biodiversity calculations.

OverviewACEpath Teacher's Diagnosis

03 The student divides by the discharge station value in the denominator of the relative percentage change calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N(N−1)=250(249)=62250N(N - 1) = 250(249) = 62250 ⟹\Longrightarrow Reference: ∑n(n−1)=4830+4160+3540+2970=15500\text{Reference: } \sum n(n-1) = 4830 + 4160 + 3540 + 2970 = 15500 ⟹\Longrightarrow Dref=1550062250=0.2490D_{\text{ref}} = \frac{15500}{62250} = 0.2490

  2. Step 2

    Discharge: ∑n(n−1)=39800+870+210+20=40900\text{Discharge: } \sum n(n-1) = 39800 + 870 + 210 + 20 = 40900 ⟹\Longrightarrow Ddis=4090062250=0.6570D_{\text{dis}} = \frac{40900}{62250} = 0.6570

  3. Step 3

    (1−D)ref=1−0.2490=0.7510(1 - D)_{\text{ref}} = 1 - 0.2490 = 0.7510 ⟹\Longrightarrow (1−D)dis=1−0.6570=0.3430(1 - D)_{\text{dis}} = 1 - 0.6570 = 0.3430

  4. Step 4

    Δ%=(0.3430−0.75100.3430)×100%\Delta\% = \left(\frac{0.3430 - 0.7510}{0.3430}\right) \times 100\%

    Correct

    Δ%=(0.3430−0.75100.7510)×100%\Delta\% = \left(\frac{0.3430 - 0.7510}{0.7510}\right) \times 100\%

    When calculating the relative change caused by an impact relative to a reference station, the denominator must be the reference (baseline) value (1−D)reference=0.7510(1 - D)_{\text{reference}} = 0.7510, not the impacted discharge value.

  5. Step 5

    Δ%=(−0.40800.3430)×100%=−119%\Delta\% = \left(\frac{-0.4080}{0.3430}\right) \times 100\% = -119\%

    Correct

    Δ%=(−0.40800.7510)×100%≈−54.3%\Delta\% = \left(\frac{-0.4080}{0.7510}\right) \times 100\% \approx -54.3\% (or −53.9%-53.9\% using rounded continuous proportions)

    This result follows directly from using the wrong denominator in Step 4. Dividing by the correct reference value yields approximately −54.3%-54.3\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the finite-population formula D=∑ni(ni−1)N(N−1)D = \sum \frac{n_i(n_i - 1)}{N(N - 1)} for both stations.

You accurately found the pairwise combinations for each species and summed them without error.

You correctly computed Simpson's index of diversity as 1−D1 - D.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Relative Change Base Error

You accidentally placed the new (discharge) value in the denominator of the percentage change formula instead of the baseline (reference) value.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the comparative baseline (the reference state) with the altered final state in relative percentage change formulas of the form final−initialinitial×100%\frac{\text{final} - \text{initial}}{\text{initial}} \times 100\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying the Baseline Value
  • Relative percentage change relative to a control/reference always divides by the control/reference value: Δ%=Impact−ReferenceReference×100%\Delta\% = \frac{\text{Impact} - \text{Reference}}{\text{Reference}} \times 100\%.

  • Always circle or label the baseline condition before substituting values into the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the reference diversity (1−D)ref=0.7510(1 - D)_{\text{ref}} = 0.7510 into the denominator: Δ(1−D)%=0.3430−0.75100.7510×100%\Delta(1-D)\% = \frac{0.3430 - 0.7510}{0.7510} \times 100\%.

  2. Evaluate the numerator: 0.3430−0.7510=−0.40800.3430 - 0.7510 = -0.4080.

  3. Divide by the reference baseline: −0.40800.7510≈−0.543275\frac{-0.4080}{0.7510} \approx -0.543275.

  4. Multiply by 100%100\% and round to three significant figures: −54.3%-54.3\% (or −53.9%-53.9\% if using the continuous formulation).

Final answer

(a) Dreference=0.249D_{\text{reference}} = 0.249 (or 0.2520.252), Ddischarge=0.657D_{\text{discharge}} = 0.657 (or 0.6550.655); (b) Δ(1−D)%=−54.3%\Delta(1-D)\% = -54.3\% (or −53.9%-53.9\%)

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the denominator in any 'relative to X' percentage calculation is always the value of X itself.

  • Remember that a diversity index cannot decrease by more than 100%100\% since the minimum possible diversity is 00.

Lock it in

Similar question

01

An unpolluted stream has Simpson's dominance index D=0.150D = 0.150. Downstream from an agricultural runoff outlet, dominance increases to D=0.450D = 0.450. Calculate the percentage change in Simpson's Index of Diversity (1−D1 - D).

Answer

Δ(1−D)%=−35.3%\Delta(1 - D)\% = -35.3\%. Key steps: (1−D)ref=1−0.150=0.850(1 - D)_{\text{ref}} = 1 - 0.150 = 0.850; (1−D)polluted=1−0.450=0.550(1 - D)_{\text{polluted}} = 1 - 0.450 = 0.550. Relative change: 0.550−0.8500.850×100%=−0.3000.850×100%≈−35.3%\frac{0.550 - 0.850}{0.850} \times 100\% = \frac{-0.300}{0.850} \times 100\% \approx -35.3\%.

02

A forest plot has N=100N = 100 trees divided among three species: n1=60n_1 = 60, n2=30n_2 = 30, and n3=10n_3 = 10. Compute: (a) finite-population dominance index D=∑ni(ni−1)N(N−1)D = \sum \frac{n_i(n_i - 1)}{N(N - 1)}, and (b) Simpson's Index of Diversity (1−D1 - D). Round both to three significant figures.

Answer

(a) D=0.455D = 0.455; (b) 1−D=0.5451 - D = 0.545. Key steps: Denominator N(N−1)=100(99)=9,900N(N - 1) = 100(99) = 9{,}900. Numerator: 60(59)+30(29)+10(9)=3,540+870+90=4,50060(59) + 30(29) + 10(9) = 3{,}540 + 870 + 90 = 4{,}500. D=4,5009,900≈0.4545≈0.455D = \frac{4{,}500}{9{,}900} \approx 0.4545 \approx 0.455. Diversity: 1−0.4545=0.5455≈0.5451 - 0.4545 = 0.5455 \approx 0.545.

03

Two restored wetland zones each contain N=200N = 200 birds across 4 species. Zone 1 has species abundances (50,50,50,50)(50, 50, 50, 50) while Zone 2 has abundances (140,30,20,10)(140, 30, 20, 10). Using the finite-sample formula D=∑ni(ni−1)N(N−1)D = \sum \frac{n_i(n_i - 1)}{N(N - 1)}, determine: (a) DD for both zones, and (b) the percentage change in Simpson's Index of Diversity (1−D1 - D) from Zone 1 to Zone 2.

Answer

(a) D1=0.246D_1 = 0.246, D2=0.518D_2 = 0.518; (b) Δ(1−D)%=−36.1%\Delta(1 - D)\% = -36.1\%. Key steps: N(N−1)=200(199)=39,800N(N-1) = 200(199) = 39{,}800. For Zone 1: Numerator is 4×(50×49)=9,8004 \times (50 \times 49) = 9{,}800, so D1=9,80039,800≈0.2462D_1 = \frac{9{,}800}{39{,}800} \approx 0.2462, (1−D1)=0.7538(1 - D_1) = 0.7538. For Zone 2: Numerator is 140(139)+30(29)+20(19)+10(9)=19,460+870+380+90=20,800140(139) + 30(29) + 20(19) + 10(9) = 19{,}460 + 870 + 380 + 90 = 20{,}800, so D2=20,80039,800≈0.5226D_2 = \frac{20{,}800}{39{,}800} \approx 0.5226, (1−D2)=0.4774(1 - D_2) = 0.4774. Relative change: 0.4774−0.75380.7538×100%≈−36.7%\frac{0.4774 - 0.7538}{0.7538} \times 100\% \approx -36.7\% (or −36.1%-36.1\% if using non-finite p2p^2 values 0.250.25 and 0.520.52).

Loading workspace…