Resources

In a cytogenetics laboratory, a synchronized culture of human lymphoblasts (2n=462n = 46) is harvested during mitosis, and a separate culture of human primary oocytes is harvested during meiosis. The average mass of one base pair of double-stranded DNA (dsDNA) is 660  g/mol660\;\text{g/mol}, and the diploid human genome in G1G_1 contains 6.0×109  bp6.0 \times 10^9\;\text{bp}. Given Avogadro's number NA=6.022×1023  mol−1N_A = 6.022 \times 10^{23}\;\text{mol}^{-1}: (a) Calculate the mass of nuclear DNA per cell in picograms (1  pg=10−12  g1\;\text{pg} = 10^{-12}\;\text{g}) for a lymphoblast at mitotic metaphase. (b) Calculate the total length of nuclear DNA per secondary oocyte at metaphase II in millimeters (1  mm=106  nm1\;\text{mm} = 10^6\;\text{nm}), assuming the standard B-DNA axial rise of 0.34  nm/bp0.34\;\text{nm/bp}. Express both answers to two significant figures.

Answer and steps

Final answer

(a) 13  pg13\;\text{pg}; (b) 2.0×103  mm2.0 \times 10^3\;\text{mm} (or 2000  mm2000\;\text{mm}).

Steps

Part (a): Mass of Nuclear DNA in a Mitotic Metaphase Cell

  1. Determine the DNA content (CC-value) at mitotic metaphase:

    • A normal human somatic cell in the G1\text{G}_1 phase of interphase is diploid (2n2n) with a DNA content of 2C2C, which corresponds to 6.0×109 bp6.0 \times 10^9\text{ bp}.
    • During the S\text{S} phase, DNA replication doubles the amount of DNA without changing the chromosome number.
    • Therefore, during mitotic metaphase, each chromosome consists of two sister chromatids, giving a DNA content of 4C4C: Number of base pairs=2×(6.0×109 bp)=1.2×1010 bp\text{Number of base pairs} = 2 \times (6.0 \times 10^9\text{ bp}) = 1.2 \times 10^{10}\text{ bp}
  2. Calculate the mass in grams:

    • One mole of base pairs has a mass of 660 g660\text{ g}.
    • The number of moles of base pairs in the cell is: n=1.2×1010 bp6.022×1023 bp/mol≈1.993×10−14 moln = \frac{1.2 \times 10^{10}\text{ bp}}{6.022 \times 10^{23}\text{ bp/mol}} \approx 1.993 \times 10^{-14}\text{ mol}
    • The total mass in grams is: m=1.993×10−14 mol×660 g/mol≈1.315×10−11 gm = 1.993 \times 10^{-14}\text{ mol} \times 660\text{ g/mol} \approx 1.315 \times 10^{-11}\text{ g}
  3. Convert to picograms (pg\text{pg}):

    • Since 1 pg=10−12 g1\text{ pg} = 10^{-12}\text{ g}: m=1.315×10−11 g10−12 g/pg=13.15 pgm = \frac{1.315 \times 10^{-11}\text{ g}}{10^{-12}\text{ g/pg}} = 13.15\text{ pg}
    • Rounded to two significant figures, the mass of DNA per cell is 13 pg13\text{ pg}.

Part (b): Length of Nuclear DNA in a Secondary Oocyte at Metaphase II

  1. Determine the DNA content in a secondary oocyte at metaphase II:

    • A primary oocyte entering meiosis I duplicates its DNA to 4C4C.
    • At the end of meiosis I, homologous chromosomes separate, and the cell divides into a secondary oocyte and the first polar body.
    • A secondary oocyte arrested at metaphase II is haploid in chromosome number (n=23n = 23), but each chromosome still consists of two sister chromatids.
    • Consequently, the DNA content is half of the primary oocyte's 4C4C, which is 2C2C (the same total amount of DNA as a G1\text{G}_1 diploid cell): Number of base pairs=6.0×109 bp\text{Number of base pairs} = 6.0 \times 10^9\text{ bp}

    Common Pitfall: Do not confuse chromosome number (nn) with DNA content (CC). While the secondary oocyte is haploid (n=23n = 23), its chromatids have not yet separated, so its DNA content is 2C2C, not 1C1C.

  2. Calculate the physical length of the DNA:

    • Each base pair contributes an axial rise of 0.34 nm0.34\text{ nm} along the double helix: L=6.0×109 bp×0.34 nm/bp=2.04×109 nmL = 6.0 \times 10^9\text{ bp} \times 0.34\text{ nm/bp} = 2.04 \times 10^9\text{ nm}
  3. Convert to millimeters (mm\text{mm}):

    • Using the conversion factor 1 mm=106 nm1\text{ mm} = 10^6\text{ nm}: L=2.04×109 nm106 nm/mm=2.04×103 mmL = \frac{2.04 \times 10^9\text{ nm}}{10^6\text{ nm/mm}} = 2.04 \times 10^3\text{ mm}
    • Rounded to two significant figures, the total length is 2.0×103 mm2.0 \times 10^3\text{ mm} (or 2000 mm2000\text{ mm}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that DNA replicates prior to mitosis and uses the G1 diploid value (2C) instead of 4C for mitotic metaphase, yielding a mass of 6.6 pg.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Diploid cell DNA=6.0×109  bp\text{Diploid cell DNA} = 6.0 \times 10^9\;\text{bp}

    Correct

    DNA at mitotic metaphase=2×(6.0×109  bp)=1.2×1010  bp  (4C)\text{DNA at mitotic metaphase} = 2 \times (6.0 \times 10^9\;\text{bp}) = 1.2 \times 10^{10}\;\text{bp}\;(4C)

    You used the diploid G1G_1 DNA content directly. Because cells replicate their nuclear DNA during S phase prior to entering mitosis, a cell at mitotic metaphase contains double that amount (4C4C).

  2. Step 2

    Mass=6.0×109×6606.022×1023=6.576×10−12  g⟹Mass=6.576  pg≈6.6  pg\text{Mass} = \frac{6.0 \times 10^9 \times 660}{6.022 \times 10^{23}} = 6.576 \times 10^{-12}\;\text{g} \Longrightarrow \text{Mass} = 6.576\;\text{pg} \approx 6.6\;\text{pg}

    Correct

    Mass=1.2×1010×6606.022×1023=1.315×10−11  g≈13  pg\text{Mass} = \frac{1.2 \times 10^{10} \times 660}{6.022 \times 10^{23}} = 1.315 \times 10^{-11}\;\text{g} \approx 13\;\text{pg}

    Your molar mass calculation and unit conversion to picograms were executed correctly, but the numerical answer is halved because it carried forward the un-replicated base pair count from Step 1.

  3. Step 3

    Metaphase II secondary oocyte has 2C DNA=6.0×109  bp\text{Metaphase II secondary oocyte has } 2C\text{ DNA} = 6.0 \times 10^9\;\text{bp}

  4. Step 4

    Length=6.0×109  bp×0.34  nm/bp=2.04×109  nm⟹Length in mm=2.04×109106=2.04×103  mm≈2.0×103  mm\text{Length} = 6.0 \times 10^9\;\text{bp} \times 0.34\;\text{nm/bp} = 2.04 \times 10^9\;\text{nm} \Longrightarrow \text{Length in mm} = \frac{2.04 \times 10^9}{10^6} = 2.04 \times 10^3\;\text{mm} \approx 2.0 \times 10^3\;\text{mm}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a secondary oocyte arrested at metaphase II has a 2C2C DNA content.

You performed the stoichiometric conversion using Avogadro's number and molar mass with sound arithmetic.

You converted physical lengths between nanometers and millimeters accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
omitted_S_phase_replication

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mitotic metaphase as having the baseline diploid G1G_1 DNA amount (2C2C), overlooking that mitotic division occurs after S-phase replication, where every chromosome has two sister chromatids (4C4C).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the cell cycle stage relative to S phase
  • Cells in G1G_1 are 2C2C, but after S phase through mitotic metaphase/anaphase, the nuclear DNA content is 4C4C.

  • Whenever a problem specifies mitotic prophase or metaphase, double the G1G_1 DNA content before calculating mass or length.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Double the diploid G1G_1 base pair count to account for S-phase replication: Nbp=2×(6.0×109  bp)=1.2×1010  bpN_{\text{bp}} = 2 \times (6.0 \times 10^9\;\text{bp}) = 1.2 \times 10^{10}\;\text{bp}.

  2. Calculate moles of base pairs: n=1.2×1010  bp6.022×1023  bp/mol≈1.993×10−14  moln = \frac{1.2 \times 10^{10}\;\text{bp}}{6.022 \times 10^{23}\;\text{bp/mol}} \approx 1.993 \times 10^{-14}\;\text{mol}.

  3. Multiply by the molar mass: m=1.993×10−14  mol×660  g/mol≈1.315×10−11  gm = 1.993 \times 10^{-14}\;\text{mol} \times 660\;\text{g/mol} \approx 1.315 \times 10^{-11}\;\text{g}.

  4. Convert grams to picograms: m=1.315×10−11  g×1012  pg/g≈13  pgm = 1.315 \times 10^{-11}\;\text{g} \times 10^{12}\;\text{pg/g} \approx 13\;\text{pg}.

Final answer

(a) 13  pg13\;\text{pg}; (b) 2.0×103  mm2.0 \times 10^3\;\text{mm} (or 2000  mm2000\;\text{mm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Track chromosome ploidy (nn) and DNA content (CC) as separate variables across each phase of mitosis and meiosis.

  • Practice drawing a simple CC-value curve across G1G_1, S, G2G_2, mitosis, and cytokinesis to reinforce that mitotic metaphase is always 4C4C.

OverviewACEpath Teacher's Diagnosis

02 The student assumes a secondary oocyte at metaphase II is fully haploid with 1C DNA content (3.0 × 10^9 bp), halving the actual DNA length to 1.0 × 10^3 mm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Lymphoblast at metaphase has replicated DNA (4C)=1.2×1010 bp  ⟹  Mass=1.2×1010×6606.022×1023=1.315×10−11 g=13.15 pg≈13 pg(4C) = 1.2 \times 10^{10}\text{ bp} \implies \text{Mass} = \frac{1.2 \times 10^{10} \times 660}{6.022 \times 10^{23}} = 1.315 \times 10^{-11}\text{ g} = 13.15\text{ pg} \approx 13\text{ pg}

  2. Step 2

    Secondary oocyte is haploid after meiosis I: DNA=3.0×109 bp\text{DNA} = 3.0 \times 10^9\text{ bp}

    Correct

    DNA content=2C=6.0×109 bp\text{DNA content} = 2C = 6.0 \times 10^9\text{ bp}

    While meiosis I reduces the chromosome number to haploid (n=23n = 23), sister chromatids do not separate until anaphase II. Therefore, each of the 23 chromosomes still has two chromatids, giving a DNA content of 2C2C (6.0×109 bp6.0 \times 10^9\text{ bp}) rather than 1C1C (3.0×109 bp3.0 \times 10^9\text{ bp}).

  3. Step 3

    Length=3.0×109 bp×0.34 nm/bp=1.02×109 nm  ⟹  Length in mm=1.02×109106=1.02×103 mm≈1.0×103 mm\text{Length} = 3.0 \times 10^9\text{ bp} \times 0.34\text{ nm/bp} = 1.02 \times 10^9\text{ nm} \implies \text{Length in mm} = \frac{1.02 \times 10^9}{10^6} = 1.02 \times 10^3\text{ mm} \approx 1.0 \times 10^3\text{ mm}

    Correct

    Length=6.0×109 bp×0.34 nm/bp=2.04×109 nm  ⟹  2.04×109106≈2.0×103 mm\text{Length} = 6.0 \times 10^9\text{ bp} \times 0.34\text{ nm/bp} = 2.04 \times 10^9\text{ nm} \implies \frac{2.04 \times 10^9}{10^6} \approx 2.0 \times 10^3\text{ mm}

    Your conversion method from base pairs to nanometers and then to millimeters was executed correctly, but your final numerical value was halved because it carried over the 1C1C base pair count from step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the DNA replication doubling to 4C4C for mitotic metaphase.

You accurately converted base pairs to moles, grams, and picograms using Avogadro's number and molar mass.

You applied the correct unit conversion factor between nanometers and millimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing ploidy (n) with DNA content (C)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Equating haploid chromosome number (nn) with 1C1C DNA content during meiosis II. In secondary oocytes arrested at metaphase II, homologous chromosomes have separated, but sister chromatids remain joined at the centromere, so the cell contains n=23n = 23 duplicated chromosomes, corresponding to a 2C2C DNA amount (6.0×109 bp6.0 \times 10^9\text{ bp}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Ploidy ($n$) vs. DNA Value ($C$)
  • Ploidy (nn) counts sets of centromeres/homologs; DNA content (CC) counts the actual amount of DNA relative to an unreplicated gamete (1C1C).

  • Always check whether chromosomes are replicated (2 chromatids = 2×2\times DNA per chromosome) or unreplicated (1 chromatid).

Trace Meiotic Stages
  • Meiosis I separates homologous pairs (4C→2C4C \to 2C, ploidy 2n→n2n \to n). Meiosis II separates sister chromatids (2C→1C2C \to 1C, ploidy remains nn).

  • At any stage of meiosis II before anaphase II (such as metaphase II), set the DNA content to 2C2C.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that a secondary oocyte at metaphase II has completed meiosis I but not meiosis II: ploidy is n=23n = 23, but each chromosome consists of two sister chromatids, so DNA content is 2C=6.0×109 bp2C = 6.0 \times 10^9\text{ bp}.

  2. Multiply total base pairs by the axial rise per base pair: L=6.0×109 bp×0.34 nm/bp=2.04×109 nmL = 6.0 \times 10^9\text{ bp} \times 0.34\text{ nm/bp} = 2.04 \times 10^9\text{ nm}.

  3. Convert from nanometers to millimeters: 2.04×109 nm106 nm/mm=2.04×103 mm≈2.0×103 mm\frac{2.04 \times 10^9\text{ nm}}{10^6\text{ nm/mm}} = 2.04 \times 10^3\text{ mm} \approx 2.0 \times 10^3\text{ mm}.

Final answer

(a) 13 pg13\text{ pg}; (b) 2.0×103 mm2.0 \times 10^3\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice tracking both nn (chromosome number) and CC (chromatid/DNA amount) across all stages of mitosis, meiosis I, and meiosis II.

  • Review the state of chromosomes in meiotic arrest points (e.g., primary oocytes arrested at prophase I vs. secondary oocytes arrested at metaphase II).

OverviewACEpath Teacher's Diagnosis

03 The student confuses the metric prefix conversion between nanometers and millimeters, dividing by 10^3 instead of 10^6, resulting in a length of 2.0 × 10^6 mm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Metaphase Lymphoblast has 4C DNA=1.2×1010 bp  ⟹  Mass=1.2×1010×6606.022×1023  ⟹  Mass=1.315×10−11 g  ⟹  Mass=13.15 pg≈13 pg\text{Metaphase Lymphoblast has } 4C\text{ DNA} = 1.2 \times 10^{10}\text{ bp} \implies \text{Mass} = \frac{1.2 \times 10^{10} \times 660}{6.022 \times 10^{23}} \implies \text{Mass} = 1.315 \times 10^{-11}\text{ g} \implies \text{Mass} = 13.15\text{ pg} \approx 13\text{ pg}

  2. Step 2

    Metaphase II secondary oocyte has 2C DNA=6.0×109 bp  ⟹  Length in nm=6.0×109×0.34=2.04×109 nm\text{Metaphase II secondary oocyte has } 2C\text{ DNA} = 6.0 \times 10^9\text{ bp} \implies \text{Length in nm} = 6.0 \times 10^9 \times 0.34 = 2.04 \times 10^9\text{ nm}

  3. Step 3

    Convert nm to mm:2.04×109103\text{Convert nm to mm}: \frac{2.04 \times 10^9}{10^3}

    Correct

    L=2.04×109 nm106 nm/mm=2.04×103 mmL = \frac{2.04 \times 10^9\text{ nm}}{10^6\text{ nm/mm}} = 2.04 \times 10^3\text{ mm}

    You divided by 10310^3 instead of 10610^6. Because 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m} and 1 nm=10−9 m1\text{ nm} = 10^{-9}\text{ m}, the difference in magnitude is 10610^6, meaning 1 mm=106 nm1\text{ mm} = 10^6\text{ nm} (or 1 mm=103  μm=106 nm1\text{ mm} = 10^3\;\mu\text{m} = 10^6\text{ nm}).

  4. Step 4

    Length=2.04×106 mm≈2.0×106 mm\text{Length} = 2.04 \times 10^6\text{ mm} \approx 2.0 \times 10^6\text{ mm}

    Correct

    L≈2.0×103 mmL \approx 2.0 \times 10^3\text{ mm}

    This result follows directly from using the incorrect metric conversion factor in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly tracked chromosome count and CC-value changes across both mitosis and meiosis.

You correctly calculated the mass of DNA per cell in Part (a) using molar mass and Avogadro's number.

You correctly multiplied the base pair count by 0.34 nm/bp0.34\text{ nm/bp} to find the length in nanometers in Part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error

You divided by 10310^3 instead of 10610^6 when converting from nanometers to millimeters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely treated the step between nanometers and millimeters as a single standard SI metric step (10310^3) rather than two metric steps ("nano"→"micro"→"milli""\text{nano}" \to "\text{micro}" \to "\text{milli}", each being 10310^3, giving a total factor of 10610^6).

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric ladder step count
  • Each named SI prefix step from milli- to micro- to nano- is a factor of 10310^3.

  • Count the intermediate prefix steps: 1 mm=103  μm=106 nm1\text{ mm} = 10^3\;\mu\text{m} = 10^6\text{ nm}.

Sanity check by standard units
  • Converting to meters first eliminates memorization slip: x nm=x×10−9 mx\text{ nm} = x \times 10^{-9}\text{ m}, and 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}.

  • Divide: x×10−9 m10−3 m/mm=x×10−6 mm\frac{x \times 10^{-9}\text{ m}}{10^{-3}\text{ m/mm}} = x \times 10^{-6}\text{ mm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the conversion factor given in the problem: 1 mm=106 nm1\text{ mm} = 10^6\text{ nm}.

  2. Divide the length in nanometers by 10610^6: L=2.04×109 nm106 nm/mm=2.04×103 mmL = \frac{2.04 \times 10^9\text{ nm}}{10^6\text{ nm/mm}} = 2.04 \times 10^3\text{ mm}.

  3. Round to two significant figures as requested.

Final answer

(a) 13 pg13\text{ pg}; (b) 2.0×103 mm2.0 \times 10^3\text{ mm} (or 2000 mm2000\text{ mm})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the SI prefix ladder: milli-(10−3)\text{milli-} (10^{-3}), micro-(10−6)\text{micro-} (10^{-6}), nano-(10−9)\text{nano-} (10^{-9}), and pico-(10−12)\text{pico-} (10^{-12}).

  • Practice converting directly between non-adjacent metric units by routing through base meters (10−9 m/10−3 m=10−610^{-9}\text{ m} / 10^{-3}\text{ m} = 10^{-6}).

  • Double-check given conversion hints in the problem statement before beginning multi-step unit conversions.

Lock it in

Similar question

01

A diploid yeast cell has 1.2×107  bp1.2 \times 10^7\;\text{bp} of nuclear DNA in G1G_1. Assuming an average dsDNA mass of 660  g/mol660\;\text{g/mol} and NA=6.022×1023  mol−1N_A = 6.022 \times 10^{23}\;\text{mol}^{-1}, calculate the nuclear DNA mass in femtograms (1  fg=10−15  g1\;\text{fg} = 10^{-15}\;\text{g}) for a yeast cell at mitotic metaphase. Express your answer to two significant figures.

Answer

26  fg26\;\text{fg}. At mitotic metaphase, DNA is replicated to 4C=2.4×107  bp4C = 2.4 \times 10^7\;\text{bp}. Mass =2.4×107×6606.022×1023=2.63×10−14  g=26.3  fg≈26  fg= \frac{2.4 \times 10^7 \times 660}{6.022 \times 10^{23}} = 2.63 \times 10^{-14}\;\text{g} = 26.3\;\text{fg} \approx 26\;\text{fg}.

02

In a laboratory mouse (2n=402n = 40), the haploid genome size (1C1C) is 2.7×109  bp2.7 \times 10^9\;\text{bp}. Calculate the total DNA length in millimeters for: (1) a primary spermatocyte at metaphase I, and (2) a mature spermatozoon. Assume an axial rise of 0.34  nm/bp0.34\;\text{nm/bp} and express each to two significant figures.

Answer

(1) Primary spermatocyte at metaphase I is 4C4C: 4×2.7×109  bp=1.08×1010  bp4 \times 2.7 \times 10^9\;\text{bp} = 1.08 \times 10^{10}\;\text{bp}, giving length =1.08×1010×0.34×10−6≈3.7×103  mm= 1.08 \times 10^{10} \times 0.34 \times 10^{-6} \approx 3.7 \times 10^3\;\text{mm} (or 3700  mm3700\;\text{mm}). (2) Spermatozoon is 1C1C: 2.7×109  bp2.7 \times 10^9\;\text{bp}, giving length =2.7×109×0.34×10−6≈9.2×102  mm= 2.7 \times 10^9 \times 0.34 \times 10^{-6} \approx 9.2 \times 10^2\;\text{mm} (or 920  mm920\;\text{mm}).

03

A cell biologist measures the DNA content of cultured diploid fibroblasts using flow cytometry. The mean fluorescence intensity of cells in G1G_1 is 50 arbitrary units (a.u.). What expected mean fluorescence intensity would correspond to: (a) cells in mitotic anaphase before cytokinesis, and (b) isolated nuclei from daughter cells in early G1G_1 following cytokinesis?

Answer

(a) 100 a.u. (During anaphase, the cell has duplicated chromatids segregated to opposite poles but is still a single cell containing 4C4C DNA). (b) 50 a.u. (Each daughter nucleus in G1G_1 receives an equal 2C2C complement of DNA).

Loading workspace…