Resources

To quantify the impact of elevated sea surface temperatures on coral-algal symbiosis, a marine biology research team conducts a controlled thermal stress experiment on colonies of Acropora millepora. Colonies are maintained at a baseline temperature of 26.0 ∘C26.0\text{ }^\circ\text{C} and then subjected to an elevated temperature of 31.5 ∘C31.5\text{ }^\circ\text{C} over 14 days. The team uses pulse-amplitude modulation (PAM) fluorometry to measure the maximum quantum yield of photosystem II (Fv/FmF_v/F_m), which serves as a diagnostic index of photosynthetic competency in the endosymbiotic dinoflagellates (Symbiodiniaceae). At day 0, Fv/Fm=0.680F_v/F_m = 0.680, and the endosymbiont density is 1.85×106 cells/cm21.85 \times 10^6\text{ cells/cm}^2. At day 14, Fv/FmF_v/F_m drops to 0.2100.210, and endosymbiont density declines to 3.40×105 cells/cm23.40 \times 10^5\text{ cells/cm}^2. Calculate the percentage reduction in maximum photosynthetic efficiency (Fv/FmF_v/F_m) and the percentage loss of endosymbiont density (bleaching severity). Express both values to three significant figures.

Answer and steps

Final answer

Reduction in Fv/Fm=69.1%F_v/F_m = 69.1\%, Loss of endosymbiont density =81.6%= 81.6\%

Steps

01

Calculate the Percentage Reduction in Photosystem II Efficiency (Fv/FmF_v/F_m)

To find the extent of thermal stress and bleaching, we calculate the percentage reduction for both photosynthetic efficiency (Fv/FmF_v/F_m) and endosymbiont population density.

General Formula for Percentage Reduction

The percentage reduction (or loss) of a biological parameter from an initial value to a final value is calculated as: Percentage Reduction=Initial Value−Final ValueInitial Value×100%\text{Percentage Reduction} = \frac{\text{Initial Value} - \text{Final Value}}{\text{Initial Value}} \times 100\%

The maximum quantum yield of photosystem II (Fv/FmF_v/F_m) measures photochemical capacity:

  • Initial value (Day 00): 0.6800.680
  • Final value (Day 1414): 0.2100.210

Substitute these values into the formula:

Δ(Fv/Fm)=0.680−0.210=0.470\Delta(F_v/F_m) = 0.680 - 0.210 = 0.470

Percentage Reduction=0.4700.680×100%≈69.118%\text{Percentage Reduction} = \frac{0.470}{0.680} \times 100\% \approx 69.118\%

Rounding to three significant figures gives: Reduction in Fv/Fm=69.1%\text{Reduction in } F_v/F_m = 69.1\%

Biological Context: Elevated temperatures damage the photosynthetic apparatus (specifically the D1 protein of photosystem II) in Symbiodiniaceae, causing severe photoinhibition and a sharp decline in photosynthetic yield.


02

Calculate the Percentage Loss of Endosymbiont Density (Bleaching Severity)

Convert both density values to a common power of ten before subtracting:

  • Initial density (Day 00): 1.85×106 cells/cm21.85 \times 10^6\text{ cells/cm}^2
  • Final density (Day 1414): 3.40×105 cells/cm2=0.340×106 cells/cm23.40 \times 10^5\text{ cells/cm}^2 = 0.340 \times 10^6\text{ cells/cm}^2

Calculate the absolute decrease in cell density:

ΔDensity=1.85×106−0.340×106=1.51×106 cells/cm2\Delta\text{Density} = 1.85 \times 10^6 - 0.340 \times 10^6 = 1.51 \times 10^6\text{ cells/cm}^2

Substitute into the percentage loss formula:

Percentage Loss=1.51×1061.85×106×100%=1.511.85×100%≈81.622%\text{Percentage Loss} = \frac{1.51 \times 10^6}{1.85 \times 10^6} \times 100\% = \frac{1.51}{1.85} \times 100\% \approx 81.622\%

Rounding to three significant figures gives: Loss of endosymbiont density=81.6%\text{Loss of endosymbiont density} = 81.6\%

Biological Context: In response to thermal stress and toxic reactive oxygen species (ROS) produced by malfunctioning photosynthetic machinery, the coral host expels the dinoflagellates or the symbionts undergo apoptosis, resulting in visible coral bleaching.


Common Pitfalls to Avoid

  • Base Value Error: Always divide the change by the initial (Day 00) value, not the post-stress (Day 1414) value.
  • Scientific Notation Alignment: Ensure powers of ten match before subtracting (10610^6 vs. 10510^5).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student divides by the final day 14 value instead of the initial day 0 baseline when calculating percentage decrease.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Reduction in Fv/Fm=0.680−0.210=0.470\text{Reduction in } F_v/F_m = 0.680 - 0.210 = 0.470

  2. Step 2

    Percentage reduction=(0.470/0.210)×100%=224%\text{Percentage reduction} = (0.470 / 0.210) \times 100\% = 224\%

    Correct

    Percentage reduction=0.4700.680×100%≈69.1%\text{Percentage reduction} = \frac{0.470}{0.680} \times 100\% \approx 69.1\%

    You divided by the final value (0.2100.210) instead of the initial baseline value (0.6800.680). Because the parameter started at 0.6800.680, that initial value must serve as the denominator.

  3. Step 3

    Loss in density=1.85×106−3.40×105=1.51×106 cells/cm2\text{Loss in density} = 1.85 \times 10^6 - 3.40 \times 10^5 = 1.51 \times 10^6\text{ cells/cm}^2

  4. Step 4

    Percentage loss=(1.51×106/3.40×105)×100%=444%\text{Percentage loss} = (1.51 \times 10^6 / 3.40 \times 10^5) \times 100\% = 444\%

    Correct

    Percentage loss=1.51×1061.85×106×100%≈81.6%\text{Percentage loss} = \frac{1.51 \times 10^6}{1.85 \times 10^6} \times 100\% \approx 81.6\%

    You placed the post-stress density (3.40×1053.40 \times 10^5) in the denominator rather than the initial baseline density (1.85×1061.85 \times 10^6). A biological population cannot decline by more than 100%100\% of its original size.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the initial and final values for both biological parameters.

You aligned scientific notation powers accurately to find the absolute loss in symbiont density.

You accurately subtracted the final values from the initial values to find the absolute differences.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Denominator in Percentage Change

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the final post-stress value (Day 14) as the denominator instead of the initial baseline reference (Day 0) when computing percentage decrease.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Base in Percentage Change
  • Percentage change measures the relative difference compared to the original starting point: Percentage Reduction=Initial−FinalInitial×100%\text{Percentage Reduction} = \frac{\text{Initial} - \text{Final}}{\text{Initial}} \times 100\%.

  • Always place the starting baseline value (Day 0) in the denominator, never the final value.

Sanity Check for Reductions
  • For any non-negative physical or biological quantity, a percentage reduction cannot exceed 100%100\%, because losing 100%100\% means dropping to zero.

  • Whenever your computed reduction exceeds 100%100\%, pause and verify whether you accidentally divided by the smaller final value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the absolute reduction in Fv/FmF_v/F_m by the initial value: 0.4700.680×100%≈69.118%\frac{0.470}{0.680} \times 100\% \approx 69.118\%.

  2. Round the Fv/FmF_v/F_m reduction to three significant figures to obtain 69.1%69.1\%.

  3. Divide the absolute loss in density by the initial density: 1.51×1061.85×106×100%≈81.622%\frac{1.51 \times 10^6}{1.85 \times 10^6} \times 100\% \approx 81.622\%.

  4. Round the density loss to three significant figures to obtain 81.6%81.6\%.

Final answer

Reduction in Fv/Fm=69.1%F_v/F_m = 69.1\%, Loss of endosymbiont density =81.6%= 81.6\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the formula for percentage reduction: always divide the absolute drop by the original starting baseline.

  • Use the 100%100\% ceiling rule to sanity-check future answers: a reduction of a positive physical quantity can never exceed 100%100\%.

  • Practice identifying the reference starting condition in multi-day biological experiments.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the remaining percentage of the baseline value at day 14 rather than the percentage reduction or loss.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Percentage=0.2100.680×100%=30.9%\text{Percentage} = \frac{0.210}{0.680} \times 100\% = 30.9\%

    Correct

    Percentage Reduction=0.680−0.2100.680×100%≈69.1%\text{Percentage Reduction} = \frac{0.680 - 0.210}{0.680} \times 100\% \approx 69.1\%

    You calculated the percentage of photosynthetic efficiency remaining at Day 14 (30.9%30.9\%) instead of the percentage decrease from the initial baseline.

  2. Step 2

    Percentage=3.40×1051.85×106×100%=(0.340×1061.85×106)×100%=18.4%\text{Percentage} = \frac{3.40 \times 10^5}{1.85 \times 10^6} \times 100\% = \left(\frac{0.340 \times 10^6}{1.85 \times 10^6}\right) \times 100\% = 18.4\%

    Correct

    Percentage Loss=1.85×106−0.340×1061.85×106×100%≈81.6%\text{Percentage Loss} = \frac{1.85 \times 10^6 - 0.340 \times 10^6}{1.85 \times 10^6} \times 100\% \approx 81.6\%

    You converted the powers of ten properly and found the remaining fraction of endosymbionts (18.4%18.4\%), but you omitted subtracting the final density from the initial density to measure the loss.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the Day 0 initial baseline and Day 14 post-stress values for both biological parameters.

You converted scientific notation exponents accurately to a common power of ten before dividing.

You performed accurate arithmetic and rounded your final ratios correctly to three significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Remaining Value vs. Percentage Reduction Confusion

You computed the remaining percentage at the end of the thermal stress treatment rather than finding the amount lost relative to the baseline.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated FinalInitial×100%\frac{\text{Final}}{\text{Initial}} \times 100\% as the percentage reduction formula, conflating the final retained fraction with the change (loss) over time: Initial−FinalInitial×100%=100%−Remaining%\frac{\text{Initial} - \text{Final}}{\text{Initial}} \times 100\% = 100\% - \text{Remaining}\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Numerator of Change
  • A reduction or loss requires the change in quantity: ΔX=Xinitial−Xfinal\Delta X = X_{\text{initial}} - X_{\text{final}}.

  • Calculate the absolute difference between initial and final values before dividing by the initial baseline.

Complement Rule for Loss
  • Percentage Reduction=100%−(FinalInitial×100%)\text{Percentage Reduction} = 100\% - \left(\frac{\text{Final}}{\text{Initial}} \times 100\%\right).

  • If you calculate the remaining percentage first, subtract it from 100%100\% to obtain the percentage reduction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Percentage Reduction in Fv/Fm=100%−30.882%≈69.1%\text{Percentage Reduction in } F_v/F_m = 100\% - 30.882\% \approx 69.1\%

  2. Percentage Loss in Density=100%−18.378%≈81.6%\text{Percentage Loss in Density} = 100\% - 18.378\% \approx 81.6\%

Final answer

Reduction in Fv/Fm=69.1%F_v/F_m = 69.1\%, Loss of endosymbiont density =81.6%= 81.6\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Check question wording carefully for 'percentage of' versus 'percentage reduction/loss of'.

  • Write out the full formula Initial−FinalInitial×100%\frac{\text{Initial} - \text{Final}}{\text{Initial}} \times 100\% before substituting numbers.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the difference in scientific notation exponents when subtracting the endosymbiont densities.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Percentage reduction in \text{Percentage reduction in } F_v/F_m = [(0.680 - 0.210) / 0.680] ×\times 100%   ⟹  \implies (0.470 / 0.680) ×\times 100%   ⟹  \implies 69.1%

  2. Step 2

    Loss\text{Loss} = (1.85 - 3.40) ×\times 10^6   ⟹  \implies Density loss\text{Density loss} = 3.40 - 1.85 = 1.55 ×\times 10^6 cells/cm\text{ cells/cm}^2

    Correct

    \Delta$$\text{Density} = 1.85 ×\times 10^6 - 3.40 ×\times 10^5 = (1.85 - 0.340) ×\times 10^6 = 1.51 ×\times 10^6 cells/cm\text{ cells/cm}^2$$

    You subtracted the coefficients directly without adjusting for the difference in powers of ten (10610^6 versus 10510^5). Day 14 density is 3.40×105=0.340×106 cells/cm23.40 \times 10^5 = 0.340 \times 10^6\text{ cells/cm}^2.

  3. Step 3

    Percentage loss\text{Percentage loss} = (1.55 ×\times 10^6 / 1.85 ×\times 10^6) ×\times 100% = 83.8%

    Correct

    Percentage loss\text{Percentage loss} = 1.51×1061.85×106\frac{1.51 \times 10^6}{1.85 \times 10^6} ×\times 100% ≈\approx 81.6%

    Your percentage calculation formula and division were carried out correctly, but the result was affected by the incorrect density loss from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the percentage reduction formula using the initial Day 0 value in the denominator.

You accurately calculated the photosynthetic efficiency drop to 69.1%69.1\%.

You rounded your answers to three significant figures as requested.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scientific notation exponent mismatch

You treated 3.40×1053.40 \times 10^5 as 3.40×1063.40 \times 10^6 when finding the change in density.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Subtracting numbers written in scientific notation requires converting them to the same power of ten before subtracting their coefficients. Because the powers 10610^6 and 10510^5 were not aligned, 3.40×1053.40 \times 10^5 was treated as ten times larger than its actual value.

REASONING PATH
Your ACEpath teacher’s suggested approach
Align Powers of Ten
  • Before adding or subtracting numbers in scientific notation, rewrite both numbers with a common exponent: a×10m−b×10n=(a−b×10n−m)×10ma \times 10^m - b \times 10^n = (a - b \times 10^{n-m}) \times 10^m.

  • Convert 3.40×1053.40 \times 10^5 to 0.340×1060.340 \times 10^6 before subtracting from 1.85×1061.85 \times 10^6.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert 3.40×105 cells/cm23.40 \times 10^5\text{ cells/cm}^2 to the common exponent 10610^6: 0.340×106 cells/cm20.340 \times 10^6\text{ cells/cm}^2.

  2. Subtract to find the absolute loss: ΔDensity=1.85×106−0.340×106=1.51×106 cells/cm2\Delta\text{Density} = 1.85 \times 10^6 - 0.340 \times 10^6 = 1.51 \times 10^6\text{ cells/cm}^2.

  3. Divide by the baseline Day 0 density and multiply by 100%100\%: 1.51×1061.85×106×100%≈81.622%\frac{1.51 \times 10^6}{1.85 \times 10^6} \times 100\% \approx 81.622\%.

  4. Round to three significant figures to obtain 81.6%81.6\%.

Final answer

Reduction in Fv/Fm=69.1%F_v/F_m = 69.1\%, Loss of endosymbiont density =81.6%= 81.6\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Always scan the exponents of numbers in scientific notation before performing addition or subtraction.

  • Practice converting values to matching powers of ten as your immediate first step.

Lock it in

Similar question

01

Under ocean acidification conditions, the calcification rate of a coral fragment decreases from 12.5 mg CaCO3/day12.5\text{ mg CaCO}_3/\text{day} to 7.50 mg CaCO3/day7.50\text{ mg CaCO}_3/\text{day}. Calculate the percentage reduction in calcification rate to three significant figures.

Answer

40.0%40.0\%. Key steps: Absolute change =12.5−7.50=5.00 mg/day= 12.5 - 7.50 = 5.00\text{ mg/day}; Percentage reduction =5.0012.5×100%=40.0%= \frac{5.00}{12.5} \times 100\% = 40.0\%.

02

During a severe marine heatwave, the endosymbiont density in a Pocillopora damicornis colony drops from 2.40×106 cells/cm22.40 \times 10^6\text{ cells/cm}^2 to 4.80×105 cells/cm24.80 \times 10^5\text{ cells/cm}^2. Calculate the percentage loss in symbiont density to three significant figures.

Answer

80.0%80.0\%. Key steps: Align powers of ten: final density =0.480×106 cells/cm2= 0.480 \times 10^6\text{ cells/cm}^2; Absolute loss =(2.40−0.480)×106=1.92×106 cells/cm2= (2.40 - 0.480) \times 10^6 = 1.92 \times 10^6\text{ cells/cm}^2; Percentage loss =1.92×1062.40×106×100%=80.0%= \frac{1.92 \times 10^6}{2.40 \times 10^6} \times 100\% = 80.0\%.

03

A thermal-tolerant coral clade retains higher photosynthetic performance under heat stress. Colony A starts at Fv/Fm=0.650F_v/F_m = 0.650 and drops to 0.4550.455. Colony B starts at Fv/Fm=0.720F_v/F_m = 0.720 and drops to 0.4320.432. Determine which colony experienced a greater percentage reduction in photosynthetic efficiency, and calculate that colony's percentage reduction to three significant figures.

Answer

Colony B experienced a greater reduction at 40.0%40.0\%. Key steps: Colony A reduction =0.650−0.4550.650×100%=0.1950.650×100%=30.0%= \frac{0.650 - 0.455}{0.650} \times 100\% = \frac{0.195}{0.650} \times 100\% = 30.0\%; Colony B reduction =0.720−0.4320.720×100%=0.2880.720×100%=40.0%= \frac{0.720 - 0.432}{0.720} \times 100\% = \frac{0.288}{0.720} \times 100\% = 40.0\%; Since 40.0%>30.0%40.0\% > 30.0\%, Colony B suffered the greater relative decline.

Loading workspace…