Resources

A culture of freshwater ciliates (Paramecium caudatum) contains contractile vacuoles that continuously expel water to maintain osmotic equilibrium. An investigator monitors an individual Paramecium placed in an unknown pond-water sample and records a total expelled volume of 8.10×10−7 cm38.10 \times 10^{-7}\,\text{cm}^3 over an incubation period of 30.0 min30.0\,\text{min}. The cell has an average of 22 actively pulsating contractile vacuoles, each emptying once every 15.0 s15.0\,\text{s}. Assuming each spherical discharge vacuole is identical and empties completely during each contraction cycle, reverse-engineer the average internal radius (rr) in micrometers (μm\mu\text{m}) of an individual contractile vacuole right before discharge.

Answer and steps

Final answer

Each vacuole discharges 30.0×60 s15.0 s=120\frac{30.0 \times 60\,\text{s}}{15.0\,\text{s}} = 120 times, giving N=2×120=240N = 2 \times 120 = 240 total contractions. The volume per discharge is Vvac=8.10×10−7 cm3240=3.375×10−9 cm3=3375 μm3V_{\text{vac}} = \frac{8.10 \times 10^{-7}\,\text{cm}^3}{240} = 3.375 \times 10^{-9}\,\text{cm}^3 = 3375\,\mu\text{m}^3. Using V=43πr3V = \frac{4}{3}\pi r^3, r=(3×33754π)1/3=(805.74)1/3≈9.31 μmr = \left(\frac{3 \times 3375}{4\pi}\right)^{1/3} = \left(805.74\right)^{1/3} \approx 9.31\,\mu\text{m}.

Steps

01

Calculate the total number of vacuolar contractions (NN)

To find the internal radius of an individual contractile vacuole right before discharge, we break the problem into three steps: finding the total number of discharge events, determining the volume of water expelled in a single contraction, and calculating the spherical radius in micrometers (μm\mu\text{m}).

Convert the total observation period from minutes to seconds: Total time=30.0 min×60 s/min=1800 s\text{Total time} = 30.0\,\text{min} \times 60\,\text{s/min} = 1800\,\text{s}

Since each vacuole empties once every 15.0 s15.0\,\text{s}, the number of discharges per vacuole is: Discharges per vacuole=1800 s15.0 s=120\text{Discharges per vacuole} = \frac{1800\,\text{s}}{15.0\,\text{s}} = 120

Because the cell possesses 22 actively pulsating contractile vacuoles operating simultaneously: N=2×120=240 total contractionsN = 2 \times 120 = 240\text{ total contractions}


02

Determine the volume of a single vacuole (VvacV_{\text{vac}})

The total expelled volume is distributed equally across all 240240 discharge events: Vvac=VtotalN=8.10×10−7 cm3240=3.375×10−9 cm3V_{\text{vac}} = \frac{V_{\text{total}}}{N} = \frac{8.10 \times 10^{-7}\,\text{cm}^3}{240} = 3.375 \times 10^{-9}\,\text{cm}^3

Convert this volume to cubic micrometers (μm3\mu\text{m}^3): Since 1 cm=104 μm1\,\text{cm} = 10^4\,\mu\text{m}, it follows that 1 cm3=(104 μm)3=1012 μm31\,\text{cm}^3 = (10^4\,\mu\text{m})^3 = 10^{12}\,\mu\text{m}^3. Vvac=3.375×10−9×1012 μm3=3375 μm3V_{\text{vac}} = 3.375 \times 10^{-9} \times 10^{12}\,\mu\text{m}^3 = 3375\,\mu\text{m}^3

Common Pitfall: Forgetting to cube the conversion factor when converting from cm3\text{cm}^3 to μm3\mu\text{m}^3 is a frequent source of error. Always remember that (104)3=1012(10^4)^3 = 10^{12}.


03

Solve for the internal radius (rr)

Model the fully filled vacuole as a sphere right before discharge: Vvac=43πr3V_{\text{vac}} = \frac{4}{3}\pi r^3

Rearranging for rr: r3=3Vvac4π=3×3375 μm34π=101254π≈805.74 μm3r^3 = \frac{3 V_{\text{vac}}}{4\pi} = \frac{3 \times 3375\,\mu\text{m}^3}{4\pi} = \frac{10125}{4\pi} \approx 805.74\,\mu\text{m}^3

Taking the cube root: r=(805.74 μm3)1/3≈9.31 μmr = (805.74\,\mu\text{m}^3)^{1/3} \approx 9.31\,\mu\text{m}

Thus, the average internal radius of an individual contractile vacuole just prior to discharge is approximately 9.31 μm9.31\,\mu\text{m}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for the presence of 2 vacuoles, calculating total discharges for only 1 vacuole and overestimating the vacuole radius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total time=30.0 min=1800 s  ⟹  Number of discharges N=180015.0=120\text{Total time} = 30.0\text{ min} = 1800\text{ s} \implies \text{Number of discharges } N = \frac{1800}{15.0} = 120

    Correct

    N=2×1800 s15.0 s=240N = 2 \times \frac{1800\text{ s}}{15.0\text{ s}} = 240

    You correctly converted minutes to seconds and found the number of pulses per vacuole, but the problem states the cell has 22 actively pulsating contractile vacuoles, giving 2×120=2402 \times 120 = 240 total contractions.

  2. Step 2

    Volume per discharge V=8.10×10−7120=6.75×10−9 cm3=6750 μm3\text{Volume per discharge } V = \frac{8.10 \times 10^{-7}}{120} = 6.75 \times 10^{-9}\text{ cm}^3 = 6750\text{ }\mu\text{m}^3

    Correct

    Vvac=8.10×10−7 cm3240=3.375×10−9 cm3=3375 μm3V_{\text{vac}} = \frac{8.10 \times 10^{-7}\text{ cm}^3}{240} = 3.375 \times 10^{-9}\text{ cm}^3 = 3375\text{ }\mu\text{m}^3

    Your unit conversion factor of 1 cm3=1012 μm31\text{ cm}^3 = 10^{12}\text{ }\mu\text{m}^3 is completely correct, but dividing by 120120 instead of 240240 doubled the calculated volume per discharge.

  3. Step 3

    V=43πr3  ⟹  r3=3(6750)4π=1611.46 μm3  ⟹  r=(1611.46)13≈11.7 μmV = \frac{4}{3}\pi r^3 \implies r^3 = \frac{3(6750)}{4\pi} = 1611.46\text{ }\mu\text{m}^3 \implies r = (1611.46)^{\frac{1}{3}} \approx 11.7\text{ }\mu\text{m}

    Correct

    r=(3×3375 μm34π)1/3≈9.31 μmr = \left(\frac{3 \times 3375\text{ }\mu\text{m}^3}{4\pi}\right)^{1/3} \approx 9.31\text{ }\mu\text{m}

    Your algebraic rearrangement of the spherical volume formula and calculation of the cube root are mathematically sound, but the result is inflated due to the carried-over volume value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the total observation period from minutes to seconds (30.0 min=1800 s30.0\text{ min} = 1800\text{ s}).

You correctly applied the 3D unit conversion from cubic centimeters to cubic micrometers (1 cm3=1012 μm31\text{ cm}^3 = 10^{12}\text{ }\mu\text{m}^3).

You correctly modeled the vacuole as a sphere using V=43πr3V = \frac{4}{3}\pi r^3 and accurately solved for rr via the cube root.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Organelle Multiplicity

You found the discharge count for a single vacuole (120120) rather than multiplying by the 22 vacuoles present in the cell.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When translating a multi-organelle rate problem, the organelle count is easily treated as descriptive biological context rather than as an essential factor in the rate equation: Total events=(number of organelles)×(events per organelle)\text{Total events} = (\text{number of organelles}) \times (\text{events per organelle}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Organelle Multiplicity
  • If multiple identical organelles operate independently and simultaneously, the total output is the sum of outputs across all organelles: Ntotal=norganelles×NsingleN_{\text{total}} = n_{\text{organelles}} \times N_{\text{single}}.

  • Check the problem statement for the number of functional structures (such as 22 contractile vacuoles) and multiply the individual discharge frequency by that count before dividing the total volume.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the total discharge events across both vacuoles: N=2×1800 s15.0 s=240 dischargesN = 2 \times \frac{1800\text{ s}}{15.0\text{ s}} = 240\text{ discharges}.

  2. Determine the true volume per discharge: Vvac=8.10×10−7 cm3240=3.375×10−9 cm3=3375 μm3V_{\text{vac}} = \frac{8.10 \times 10^{-7}\text{ cm}^3}{240} = 3.375 \times 10^{-9}\text{ cm}^3 = 3375\text{ }\mu\text{m}^3.

  3. Solve for the vacuolar radius: r=(3×3375 μm34π)1/3=(805.74 μm3)1/3≈9.31 μmr = \left(\frac{3 \times 3375\text{ }\mu\text{m}^3}{4\pi}\right)^{1/3} = (805.74\text{ }\mu\text{m}^3)^{1/3} \approx 9.31\text{ }\mu\text{m}.

Final answer

r≈9.31 μmr \approx 9.31\text{ }\mu\text{m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always circle or note the quantity of organelles or structures mentioned in biological word problems before setting up rate and volume equations.

  • Practice checking that the total cellular flux is properly shared among all parallel pathways or organelles.

OverviewACEpath Teacher's Diagnosis

02 The student makes a unit conversion error by using 1 cm³ = 10⁶ μm³ instead of 10¹² μm³, resulting in an implausibly small radius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N = 2 ×\times (180015.0)\left(\frac{1800}{15.0}\right) = 240

  2. Step 2

    V = 8.10×10−7240\frac{8.10 \times 10^{-7}}{240} = 3.375 ×\times 10^{-9},cm\text{cm}^3

  3. Step 3

    1,cm\text{cm}^3 = 10^6,\mu$$\text{m}^3   ⟹  \implies V = 3.375 ×\times 10^{-9} ×\times 10^6 = 3.375 ×\times 10^{-3},\mu$$\text{m}^3

    Correct

    1,cm\text{cm}^3 = (10^4,\mu$$\text{m})^3 = 10^{12},\mu$$\text{m}^3   ⟹  \implies V_{vac\text{vac}} = 3.375 ×\times 10^{-9} ×\times 10^{12},\mu$$\text{m}^3 = 3375,\mu$$\text{m}^3

    You used an incorrect metric conversion factor. Because 1 cm=104 μm1\,\text{cm} = 10^4\,\mu\text{m}, cubing both sides gives 1 cm3=(104 μm)3=1012 μm31\,\text{cm}^3 = (10^4\,\mu\text{m})^3 = 10^{12}\,\mu\text{m}^3, not 106 μm310^6\,\mu\text{m}^3.

  4. Step 4

    r^3 = 3(3.375×10−3)4π\frac{3(3.375 \times 10^{-3})}{4\pi} = 8.057 ×\times 10^{-4},\mu$$\text{m}^3$$

    Correct

    r^3 = 3×33754π\frac{3 \times 3375}{4\pi} ≈\approx 805.74,\mu$$\text{m}^3$$

    Your algebraic rearrangement of the spherical volume formula was correct, but this step carries forward the incorrect volume from Step 3.

  5. Step 5

    r = (8.057 ×\times 10^{-4})^{1/3} ≈\approx 0.0931,$\mum\text{m}

    Correct

    r = (805.74,\mu$$\text{m}^3)^{1/3} ≈\approx 9.31,\mu$$\text{m}

    You correctly took the cube root of your value, but the final numerical answer is off by a factor of 100100 due to the earlier conversion error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the total observation time in seconds and determined the combined contraction count of 240240.

You accurately found the volume of a single discharge in cubic centimeters.

You correctly set up and rearranged the formula for the volume of a sphere.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric volume conversion error

You substituted 10610^6 instead of 101210^{12} when converting from cm3\text{cm}^3 to μm3\mu\text{m}^3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You may have confused the area conversion factor (103)2=106(10^3)^2 = 10^6 or forgotten to cube the linear ratio between centimeters and micrometers (1 cm=10 mm=104 μm1\,\text{cm} = 10\,\text{mm} = 10^4\,\mu\text{m}, so (104 μm)3=1012 μm3(10^4\,\mu\text{m})^3 = 10^{12}\,\mu\text{m}^3).

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish the 1D linear conversion first
  • 1 cm=10 mm=104 μm1\,\text{cm} = 10\,\text{mm} = 10^4\,\mu\text{m}

  • Always write down the one-dimensional relationship between the base units before handling areas or volumes.

Raise the entire conversion factor to the power of 3
  • 1 cm3=(104 μm)3=1012 μm31\,\text{cm}^3 = (10^4\,\mu\text{m})^3 = 10^{12}\,\mu\text{m}^3

  • Cube both the numerical base and the exponent: (10a)3=103a(10^a)^3 = 10^{3a}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct conversion: 1 cm3=(104 μm)3=1012 μm31\,\text{cm}^3 = (10^4\,\mu\text{m})^3 = 10^{12}\,\mu\text{m}^3.

  2. Convert the single-vacuole volume: Vvac=3.375×10−9 cm3×1012 μm3cm3=3375 μm3V_{\text{vac}} = 3.375 \times 10^{-9}\,\text{cm}^3 \times 10^{12}\,\frac{\mu\text{m}^3}{\text{cm}^3} = 3375\,\mu\text{m}^3.

  3. Substitute into the spherical radius equation: r3=3Vvac4π=3×33754π≈805.74 μm3r^3 = \frac{3 V_{\text{vac}}}{4\pi} = \frac{3 \times 3375}{4\pi} \approx 805.74\,\mu\text{m}^3.

  4. Take the cube root: r=(805.74)1/3≈9.31 μmr = (805.74)^{1/3} \approx 9.31\,\mu\text{m}.

Final answer

9.31,$\mum\text{m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving derived-unit conversions by raising 1D prefixes to powers of 2 or 3.

  • Check that cellular organelles have biologically reasonable dimensions: a contractile vacuole with radius 0.093 μm0.093\,\mu\text{m} (93 nm93\,\text{nm}) would be smaller than a ribosome cluster, whereas typical vacuolar radii in Paramecium are several micrometers.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly uses the formula for the surface area of a sphere or omits the factor of 4/3, using V = πr³ to solve for the radius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Total time=1800 s  ⟹  Total discharges N=2×(1800/15.0)=240\text{Total time} = 1800\,\text{s} \implies \text{Total discharges } N = 2 \times (1800 / 15.0) = 240

  2. Step 2

    V=8.10×10−7240=3.375×10−9 cm3=3375 μm3V = \frac{8.10 \times 10^{-7}}{240} = 3.375 \times 10^{-9}\,\text{cm}^3 = 3375\,\mu\text{m}^3

  3. Step 3

    V=πr3  ⟹  r3=3375π=1074.3 μm3V = \pi r^3 \implies r^3 = \frac{3375}{\pi} = 1074.3\,\mu\text{m}^3

    Correct

    V=43πr3  ⟹  r3=3×33754π≈805.74 μm3V = \frac{4}{3}\pi r^3 \implies r^3 = \frac{3 \times 3375}{4\pi} \approx 805.74\,\mu\text{m}^3

    You used the incorrect geometric formula V=πr3V = \pi r^3. The volume of a sphere is V=43πr3V = \frac{4}{3}\pi r^3, which requires multiplying by 33 and dividing by 4π4\pi.

  4. Step 4

    r=(1074.3)1/3≈10.2 μmr = (1074.3)^{1/3} \approx 10.2\,\mu\text{m}

    Correct

    r=(805.74 μm3)1/3≈9.31 μmr = (805.74\,\mu\text{m}^3)^{1/3} \approx 9.31\,\mu\text{m}

    Your cube root evaluation followed logically from your prior step, but the final numerical value is incorrect due to the missing 43\frac{4}{3} factor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the total number of contractions across both contractile vacuoles over the 30-minute period.

You correctly determined the volume expelled per contraction cycle.

You performed the unit conversion from cubic centimeters to cubic micrometers accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Formula Error (Omission of 4/3 Factor in Sphere Volume)

You set up the sphere volume relation as V=πr3V = \pi r^3, accidentally dropping the fractional coefficient 43\frac{4}{3}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing or misremembering the three-dimensional sphere volume formula V=43πr3V = \frac{4}{3}\pi r^3 with an incomplete expression missing the constant factor 43\frac{4}{3}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sphere Volume Formula
  • For any spherical biological structure (such as a contractile vacuole or spherical cell), the relationship between volume and radius is V=43πr3V = \frac{4}{3}\pi r^3.

  • Always isolate r3r^3 as r3=3V4πr^3 = \frac{3V}{4\pi} before extracting the cube root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the full volume formula for a sphere: V=43πr3=3375 μm3V = \frac{4}{3}\pi r^3 = 3375\,\mu\text{m}^3.

  2. Rearrange to solve for r3r^3: r3=3×33754π=101254π≈805.74 μm3r^3 = \frac{3 \times 3375}{4\pi} = \frac{10125}{4\pi} \approx 805.74\,\mu\text{m}^3.

  3. Take the cube root: r=(805.74)1/3≈9.31 μmr = (805.74)^{1/3} \approx 9.31\,\mu\text{m}.

Final answer

9.31 μm9.31\,\mu\text{m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard geometric formulas for 3D biological models (sphere volume V=43πr3V = \frac{4}{3}\pi r^3, sphere surface area A=4πr2A = 4\pi r^2, cylinder volume V=πr2hV = \pi r^2 h).

  • When inverting V=43πr3V = \frac{4}{3}\pi r^3, double-check that you multiply by 33 and divide by 4π4\pi before taking the cube root.

Lock it in

Similar question

01

A freshwater amoeba possesses a single contractile vacuole that empties completely once every 40.0 s40.0\text{ s}. Over an observation window of 20.0 min20.0\text{ min}, the amoeba expels a total volume of 9.00×10−8 cm39.00 \times 10^{-8}\text{ cm}^3. Assuming the vacuole is spherical right before discharge, calculate its internal radius in micrometers (μm\mu\text{m}).

Answer

N=20.0×60 s40.0 s=30 dischargesN = \frac{20.0 \times 60\text{ s}}{40.0\text{ s}} = 30\text{ discharges}. The volume per discharge is V=9.00×10−8 cm330=3.00×10−9 cm3=3000 μm3V = \frac{9.00 \times 10^{-8}\text{ cm}^3}{30} = 3.00 \times 10^{-9}\text{ cm}^3 = 3000\text{ }\mu\text{m}^3. Using V=43πr3V = \frac{4}{3}\pi r^3, r=(3×30004π)1/3≈8.95 μmr = \left(\frac{3 \times 3000}{4\pi}\right)^{1/3} \approx 8.95\text{ }\mu\text{m}.

02

An investigator studies a giant ciliate that has 44 identical contractile vacuoles distributed along its cortex. Each vacuole contracts once every 12.0 s12.0\text{ s}. Over an interval of 10.0 min10.0\text{ min}, the ciliate expels 1.20×10−6 cm31.20 \times 10^{-6}\text{ cm}^3 of water. Determine the radius (in μm\mu\text{m}) of an individual vacuole immediately before emptying.

Answer

Total contractions N=4×600 s12.0 s=4×50=200 dischargesN = 4 \times \frac{600\text{ s}}{12.0\text{ s}} = 4 \times 50 = 200\text{ discharges}. Volume per vacuole V=1.20×10−6 cm3200=6.00×10−9 cm3=6000 μm3V = \frac{1.20 \times 10^{-6}\text{ cm}^3}{200} = 6.00 \times 10^{-9}\text{ cm}^3 = 6000\text{ }\mu\text{m}^3. Solving for radius: r=(3×60004π)1/3=(4500π)1/3≈11.27 μmr = \left(\frac{3 \times 6000}{4\pi}\right)^{1/3} = \left(\frac{4500}{\pi}\right)^{1/3} \approx 11.27\text{ }\mu\text{m}.

03

Two Paramecium cells, Cell A and Cell B, maintain the same total rate of water expulsion (Q=4.50×10−8 cm3/minQ = 4.50 \times 10^{-8}\text{ cm}^3/\text{min}). Cell A has 22 contractile vacuoles that each discharge once every 10.0 s10.0\text{ s}. Cell B has a mutation causing it to possess only 11 contractile vacuole that discharges once every 5.0 s5.0\text{ s}. Determine the ratio of the radius of Cell A's vacuole to Cell B's vacuole (rA/rBr_A / r_B).

Answer

In 1 min1\text{ min} (60 s60\text{ s}), Cell A has NA=2×6010=12 dischargesN_A = 2 \times \frac{60}{10} = 12\text{ discharges}, so VA=Q12V_A = \frac{Q}{12}. Cell B has NB=1×605=12 dischargesN_B = 1 \times \frac{60}{5} = 12\text{ discharges}, so VB=Q12V_B = \frac{Q}{12}. Since their individual discharge volumes are identical (VA=VBV_A = V_B), their spherical radii are equal, giving a ratio of rA/rB=1.00r_A / r_B = 1.00.

Loading workspace…