Resources

A plant cell wall contains cellulose microfibrils synthesized by cellulose synthase complexes (rosettes) embedded in the plasma membrane. Each microfibril consists of parallel β-(1→4)\beta\text{-}(1\rightarrow 4)-glucan chains. A specific primary cell wall has a cellulose surface density of 2.43 mg/cm22.43\text{ mg/cm}^2. Given that the molar mass of anhydroglucose repeating units (C6H10O5\text{C}_6\text{H}_{10}\text{O}_5) in cellulose is 162.14 g/mol162.14\text{ g/mol}, convert this density to mmol\text{mmol} of glucose monomers per m2\text{m}^2 of cell surface. Contrast this primary structural polysaccharide of plant cells with the principal structural extracellular matrix protein synthesized and secreted by animal connective tissue cells.

Answer and steps

Final answer

The surface density is 150 mmol/m2150\text{ mmol/m}^2 of glucose monomers; the primary structural polysaccharide of plant cell walls is cellulose, whereas the principal structural extracellular protein in animal tissues is collagen.

Steps

01

Convert the cellulose mass density to g/m2\text{g/m}^2

To convert the surface density from mg/cm2\text{mg/cm}^2 to g/m2\text{g/m}^2:

  1. Convert the area unit from square centimeters (cm2\text{cm}^2) to square meters (m2\text{m}^2): 1 m=100 cm  ⟹  1 m2=(100 cm)2=10,000 cm2=104 cm21\text{ m} = 100\text{ cm} \implies 1\text{ m}^2 = (100\text{ cm})^2 = 10{,}000\text{ cm}^2 = 10^4\text{ cm}^2
  2. Multiply the given surface density by the area conversion factor: Mass per unit area=2.43 mg/cm2×10,000 cm2/m2=24,300 mg/m2\text{Mass per unit area} = 2.43\text{ mg/cm}^2 \times 10{,}000\text{ cm}^2/\text{m}^2 = 24{,}300\text{ mg/m}^2
  3. Convert milligrams (mg\text{mg}) to grams (g\text{g}): 24,300 mg/m2×1 g1,000 mg=24.3 g/m224{,}300\text{ mg/m}^2 \times \frac{1\text{ g}}{1{,}000\text{ mg}} = 24.3\text{ g/m}^2

02

Calculate the surface density in mmol/m2\text{mmol/m}^2

Each repeating monomer unit within a cellulose chain is an anhydroglucose unit (CX6HX10OX5\ce{C6H10O5}) with a molar mass of 162.14 g/mol162.14\text{ g/mol} (or 162.14 mg/mmol162.14\text{ mg/mmol}).

Using the formula n=mMn = \frac{m}{M}: Molar surface density=24.3 g/m2162.14 g/mol≈0.14987 mol/m2\text{Molar surface density} = \frac{24.3\text{ g/m}^2}{162.14\text{ g/mol}} \approx 0.14987\text{ mol/m}^2

Convert moles to millimoles (1 mol=1,000 mmol1\text{ mol} = 1{,}000\text{ mmol}): 0.14987 mol/m2×1,000 mmol/mol≈150 mmol/m20.14987\text{ mol/m}^2 \times 1{,}000\text{ mmol/mol} \approx 150\text{ mmol/m}^2

(Common pitfall: Forgetting to square the conversion factor between cm\text{cm} and m\text{m} leads to an underestimation by a factor of 100100.)


03

Contrast plant cellulose with the primary animal extracellular matrix structural protein

  • Plant Cells (Cellulose):

    • Biochemical Class: Carbohydrate (polysaccharide).
    • Monomer & Linkage: β-D-glucose\beta\text{-D-glucose} monomers joined by β-(1→4)\beta\text{-(1}\rightarrow\text{4)}-glycosidic bonds, forming linear, unbranched chains that bundle via extensive interchain hydrogen bonding into high-tensile-strength microfibrils.
    • Biosynthesis & Location: Synthesized directly at the plasma membrane by cellulose synthase rosette complexes and extruded into the cell wall to resist internal osmotic (turgor) pressure.
  • Animal Cells (Collagen):

    • Biochemical Class: Fibrous structural protein.
    • Structure: A right-handed triple-helical cable (tropocollagen) composed of three polypeptide chains characterized by repeating Gly-X-Y\text{Gly-X-Y} amino acid motifs (frequently containing proline and hydroxyproline).
    • Biosynthesis & Location: Synthesized within the rough endoplasmic reticulum, processed through the Golgi apparatus, and secreted via exocytosis into the extracellular matrix (ECM) of connective tissues by cells such as fibroblasts, providing mechanical strength, structural scaffolding, and elasticity control without forming a rigid bounding cell wall.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student miscalculates the area unit conversion factor between square centimeters and square meters as 100 instead of 10000, resulting in a density that is two orders of magnitude too low.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2.43 mg/cm2=0.00243 g/cm2  ⟹  1 m2=100 cm2  ⟹  0.00243 g/cm2×100 cm2/m2=0.243 g/m22.43\text{ mg/cm}^2 = 0.00243\text{ g/cm}^2 \implies 1\text{ m}^2 = 100\text{ cm}^2 \implies 0.00243\text{ g/cm}^2 \times 100\text{ cm}^2/\text{m}^2 = 0.243\text{ g/m}^2

    Correct

    1 m2=(100 cm)2=10,000 cm2  ⟹  2.43 mg/cm2×10,000 cm2/m2=24,300 mg/m2=24.3 g/m21\text{ m}^2 = (100\text{ cm})^2 = 10{,}000\text{ cm}^2 \implies 2.43\text{ mg/cm}^2 \times 10{,}000\text{ cm}^2/\text{m}^2 = 24{,}300\text{ mg/m}^2 = 24.3\text{ g/m}^2

    You treated 1 m21\text{ m}^2 as 100 cm2100\text{ cm}^2 instead of squaring the linear scale factor: 1 m2=(100 cm)2=10,000 cm21\text{ m}^2 = (100\text{ cm})^2 = 10{,}000\text{ cm}^2.

  2. Step 2

    0.243 g/m2/162.14 g/mol=0.001499 mol/m2  ⟹  0.001499 mol/m2×1000 mmol/mol=1.50 mmol/m20.243\text{ g/m}^2 / 162.14\text{ g/mol} = 0.001499\text{ mol/m}^2 \implies 0.001499\text{ mol/m}^2 \times 1000\text{ mmol/mol} = 1.50\text{ mmol/m}^2

    Correct

    24.3 g/m2162.14 g/mol≈0.14987 mol/m2  ⟹  0.14987 mol/m2×1000 mmol/mol≈150 mmol/m2\frac{24.3\text{ g/m}^2}{162.14\text{ g/mol}} \approx 0.14987\text{ mol/m}^2 \implies 0.14987\text{ mol/m}^2 \times 1000\text{ mmol/mol} \approx 150\text{ mmol/m}^2

    Your molar division and conversion from moles to millimoles were completely correct in principle, but the resulting numerical value was off by a factor of 100100 due to the earlier area conversion error.

  3. Step 3

    Cellulose is an unbranched polymer of glucose linked by β-(1→4)\beta\text{-(1}\rightarrow\text{4)} glycosidic bonds that forms rigid microfibrils via hydrogen bonds in plant cell walls. In contrast, the main animal extracellular matrix structural protein is collagen, which consists of three polypeptide chains wound in a triple helix rather than carbohydrate polymers.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified collagen as the principal animal extracellular matrix structural protein.

You provided a thorough and biochemically precise contrast between cellulose and collagen.

You correctly converted milligrams to grams and moles to millimoles.

You applied the molar mass formula n=mMn = \frac{m}{M} correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional analysis: failure to square area conversion factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the two-dimensional area conversion unit between square meters and square centimeters as if it were a one-dimensional linear conversion (1 m=100 cm1\text{ m} = 100\text{ cm}), omitting the required exponent of 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Square Derived Unit Rule
  • For any linear conversion factor 1 unitA=k unitB1\text{ unit}_A = k\text{ unit}_B, the corresponding area conversion factor is 1 unitA2=k2 unitB21\text{ unit}_A^2 = k^2\text{ unit}_B^2.

  • Whenever you convert square or cubic units, explicitly write out the parenthesized linear conversion with its power, such as (100 cm)2=104 cm2(100\text{ cm})^2 = 10^4\text{ cm}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the area factor correctly: 1 m2=(100 cm)2=10,000 cm21\text{ m}^2 = (100\text{ cm})^2 = 10{,}000\text{ cm}^2.

  2. Recalculate mass density: 2.43 mg/cm2×10,000 cm2/m2=24,300 mg/m2=24.3 g/m22.43\text{ mg/cm}^2 \times 10{,}000\text{ cm}^2/\text{m}^2 = 24{,}300\text{ mg/m}^2 = 24.3\text{ g/m}^2.

  3. Divide by the molar mass: 24.3 g/m2162.14 g/mol≈0.14987 mol/m2\frac{24.3\text{ g/m}^2}{162.14\text{ g/mol}} \approx 0.14987\text{ mol/m}^2.

  4. Convert to millimoles: 0.14987 mol/m2×1000 mmol/mol≈150 mmol/m20.14987\text{ mol/m}^2 \times 1000\text{ mmol/mol} \approx 150\text{ mmol/m}^2.

Final answer

150 mmol/m2150\text{ mmol/m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice dimensional analysis with area and volume units by writing conversion factors in fractional form with explicit exponents.

  • Verify orders of magnitude by visualizing physical scale: a 1 m×1 m1\text{ m} \times 1\text{ m} square contains a grid of 100×100=10,000100 \times 100 = 10{,}000 one-centimeter squares.

OverviewACEpath Teacher's Diagnosis

02 The student uses the molecular weight of free glucose (180.16 g/mol) instead of the given anhydroglucose repeating unit (162.14 g/mol), failing to account for the condensation water loss.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2.43 mg/cm2×10000 cm2/m2×(1 g1000 mg)=24.3 g/m22.43\text{ mg/cm}^2 \times 10000\text{ cm}^2/\text{m}^2 \times \left(\frac{1\text{ g}}{1000\text{ mg}}\right) = 24.3\text{ g/m}^2

  2. Step 2

    Molar mass of glucose CX6HX12OX6=180.16 g/mol  ⟹  (24.3 g/m2)/(180.16 g/mol)=0.1349 mol/m2  ⟹  0.1349 mol/m2×1000 mmol/mol=135 mmol/m2\text{Molar mass of glucose } \ce{C6H12O6} = 180.16\text{ g/mol} \implies (24.3\text{ g/m}^2) / (180.16\text{ g/mol}) = 0.1349\text{ mol/m}^2 \implies 0.1349\text{ mol/m}^2 \times 1000\text{ mmol/mol} = 135\text{ mmol/m}^2

    Correct

    Molar surface density=24.3 g/m2162.14 g/mol×1,000 mmol/mol≈150 mmol/m2\text{Molar surface density} = \frac{24.3\text{ g/m}^2}{162.14\text{ g/mol}} \times 1{,}000\text{ mmol/mol} \approx 150\text{ mmol/m}^2

    You used the molar mass of free hexose monomer CX6HX12OX6\ce{C6H12O6} (180.16 g/mol180.16\text{ g/mol}) instead of the anhydroglucose residue CX6HX10OX5\ce{C6H10O5} (162.14 g/mol162.14\text{ g/mol}) given in the prompt. When monomers condense into a polysaccharide chain, each linkage eliminates one molecule of HX2O\ce{H2O} (18.02 g/mol18.02\text{ g/mol}).

  3. Step 3

    Cellulose is a polysaccharide assembled from glucose monomers joined by β\beta-glycosidic linkages into insoluble microfibrils. The principal animal structural extracellular matrix component is collagen, which is a fibrous protein formed by a triple helix of polypeptide chains providing tensile resistance.

WHAT YOU DID WELL
Compliments from Your Teacher

You executed the metric area conversion from cm2\text{cm}^2 to m2\text{m}^2 without dropping the squaring factor.

You clearly distinguished between the carbohydrate matrix of plants and the fibrous protein matrix of animals.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Polymer repeating unit vs free monomer molar mass

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked that glucose residues inside a polymer chain have undergone condensation dehydration, reducing the formula mass from CX6HX12OX6\ce{C6H12O6} (180.16 g/mol180.16\text{ g/mol}) to an anhydroglucose unit CX6HX10OX5\ce{C6H10O5} (162.14 g/mol162.14\text{ g/mol}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Monomer Mass in Biopolymers
  • Every internal monomer unit in a condensation polymer (polysaccharides, polypeptides, polynucleotides) loses the mass of one water molecule (extM=18.02extg/mol ext{M} = 18.02 ext{ g/mol}) relative to the free monomer.

  • Always use the residue/anhydro formula mass specified in the problem statement when converting polymer mass to monomer equivalents.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Divide the surface mass density by the molar mass of the anhydroglucose residue: 24.3 g/m2162.14 g/mol≈0.14987 mol/m2\frac{24.3\text{ g/m}^2}{162.14\text{ g/mol}} \approx 0.14987\text{ mol/m}^2.

  2. Convert moles to millimoles: 0.14987 mol/m2×1,000 mmol/mol≈150 mmol/m20.14987\text{ mol/m}^2 \times 1{,}000\text{ mmol/mol} \approx 150\text{ mmol/m}^2.

Final answer

The surface density is 150 mmol/m2150\text{ mmol/m}^2; the plant structural polysaccharide is cellulose and the animal extracellular matrix protein is collagen.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review condensation polymerization stoichiometry to remember why polysaccharide residues weigh 162.14 g/mol162.14\text{ g/mol} instead of 180.16 g/mol180.16\text{ g/mol}.

  • Read given parameter values carefully in problem statements before recalculating molar masses from memory.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the animal extracellular matrix structural protein collagen with chitin, confusing structural proteins with invertebrate structural polysaccharides.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    2.43 mg/cm2×10000 cm2/m2×(1 g1000 mg)=24.3 g/m2  ⟹  (24.3 g/m2)/(162.14 g/mol)=0.1499 mol/m2  ⟹  0.1499 mol/m2×1000 mmol/mol=150 mmol/m22.43\text{ mg/cm}^2 \times 10000\text{ cm}^2/\text{m}^2 \times \left(\frac{1\text{ g}}{1000\text{ mg}}\right) = 24.3\text{ g/m}^2 \implies (24.3\text{ g/m}^2) / (162.14\text{ g/mol}) = 0.1499\text{ mol/m}^2 \implies 0.1499\text{ mol/m}^2 \times 1000\text{ mmol/mol} = 150\text{ mmol/m}^2

  2. Step 2

    Cellulose is a structural polysaccharide composed of glucose chains linked by β-(1→4) bonds in plant walls.\text{Cellulose is a structural polysaccharide composed of glucose chains linked by } \beta\text{-(1}\rightarrow 4\text{) bonds in plant walls.}

  3. Step 3

    The principal structural component secreted by animal cells is chitin, which is composed of N-acetylglucosamine chains instead of glucose.\text{The principal structural component secreted by animal cells is chitin, which is composed of N-acetylglucosamine chains instead of glucose.}

    Correct

    The principal structural extracellular matrix protein secreted by animal connective tissue cells is collagen, a fibrous triple-helical protein.\text{The principal structural extracellular matrix protein secreted by animal connective tissue cells is collagen, a fibrous triple-helical protein.}

    You identified chitin, which is a structural polysaccharide found in arthropod exoskeletons and fungal cell walls, rather than collagen, which is the principal structural protein secreted into the animal extracellular matrix.

WHAT YOU DID WELL
Compliments from Your Teacher

You completed the multi-step metric and molar surface density conversions with complete accuracy.

You correctly described the biochemical composition and linkage type of cellulose in plant cell walls.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Macromolecule Classification Confusion

You identified chitin as the primary structural component instead of collagen.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated animal external structural support with chitin (the polysaccharide of arthropod exoskeletons) while overlooking that the question specifically requested the principal extracellular matrix structural protein secreted by animal connective tissue cells (collagen).

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Structural Macromolecule Classes
  • Plant cell walls rely on structural polysaccharides (cellulose); animal connective tissue extracellular matrix relies on structural fibrous proteins (collagen).

  • Check whether the question specifies a structural protein or a polysaccharide, and whether it refers to internal connective tissue ECM or invertebrate exoskeletons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the macromolecule class: the prompt asks for an extracellular matrix protein synthesized and secreted by animal connective tissue cells.

  2. Recall the primary fibrous ECM protein: fibroblasts synthesize and secrete procollagen, which assembles into high-tensile triple-helical collagen fibrils in the extracellular space.

  3. Contrast the two structures: plant cellulose is a carbohydrate composed of linear β-(1→4)\beta\text{-(1}\rightarrow 4\text{)}-glucan chains bundled by hydrogen bonds, whereas animal collagen is a fibrous protein composed of three polypeptide chains wound in a right-handed triple helix with repeating Gly-X-Y\text{Gly-X-Y} motifs.

Final answer

The surface density is 150 mmol/m2150\text{ mmol/m}^2. The primary structural polysaccharide of plant cell walls is cellulose, whereas the principal structural extracellular matrix protein in animal connective tissues is collagen.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the major extracellular matrix (ECM) components in animals, focusing on collagen, elastin, proteoglycans, and fibronectin.

  • Create a comparison table contrasting the chemical class, monomer units, and locations of cellulose, chitin, peptidoglycan, and collagen.

Lock it in

Similar question

01

A fungal cell wall has a chitin surface density of 1.20 mg/cm21.20\text{ mg/cm}^2. Convert this density to g/m2\text{g/m}^2.

Answer

Area conversion: 1 m2=10,000 cm2\text{Area conversion: } 1\text{ m}^2 = 10{,}000\text{ cm}^2. Density =1.20 mg/cm2×10,000 cm2/m2=12,000 mg/m2=12 g/m2= 1.20\text{ mg/cm}^2 \times 10{,}000\text{ cm}^2/\text{m}^2 = 12{,}000\text{ mg/m}^2 = 12\text{ g/m}^2.

02

A bacterial biofilm secretes an extracellular polysaccharide with a surface density of 0.81 mg/cm20.81\text{ mg/cm}^2. If the repeating disaccharide unit has a molar mass of 342.3 g/mol342.3\text{ g/mol}, calculate the surface density in mmol/m2\text{mmol/m}^2 of disaccharide units.

Answer

Mass density=0.81 mg/cm2×10,000 cm2/m2=8,100 mg/m2=8.1 g/m2\text{Mass density} = 0.81\text{ mg/cm}^2 \times 10{,}000\text{ cm}^2/\text{m}^2 = 8{,}100\text{ mg/m}^2 = 8.1\text{ g/m}^2. Molar surface density=8.1 g/m2342.3 g/mol×1000 mmol/mol≈23.7 mmol/m2\text{Molar surface density} = \frac{8.1\text{ g/m}^2}{342.3\text{ g/mol}} \times 1000\text{ mmol/mol} \approx 23.7\text{ mmol/m}^2.

03

A peptidoglycan layer of thickness 30 nm30\text{ nm} in a Gram-positive bacterium has a volumetric density of 0.40 g/cm30.40\text{ g/cm}^3. Convert this volumetric density to kg/m3\text{kg/m}^3, and then determine the mass of peptidoglycan per square meter of cell wall surface area (extg/m2 ext{g/m}^2).

Answer

1 m3=(100 cm)3=106 cm31\text{ m}^3 = (100\text{ cm})^3 = 10^6\text{ cm}^3. Density =0.40 g/cm3×1 kg1000 g×106 cm3/m3=400 kg/m3= 0.40\text{ g/cm}^3 \times \frac{1\text{ kg}}{1000\text{ g}} \times 10^6\text{ cm}^3/\text{m}^3 = 400\text{ kg/m}^3. Thickness =30 nm=30×10−9 m= 30\text{ nm} = 30 \times 10^{-9}\text{ m}. Mass per area =400 kg/m3×30×10−9 m=1.2×10−5 kg/m2=0.012 g/m2= 400\text{ kg/m}^3 \times 30 \times 10^{-9}\text{ m} = 1.2 \times 10^{-5}\text{ kg/m}^2 = 0.012\text{ g/m}^2.

Loading workspace…