Resources

A laboratory compares digestive tract dimensions across two mammal species to correlate diet with intestinal surface area: Specimen P\text{P} (insectivore) has a body mass of 0.450 kg0.450\text{ kg} and a total small intestine length of 36.0 cm36.0\text{ cm} with a mean mucosal circumference of 8.00 mm8.00\text{ mm}. Specimen Q\text{Q} (folivore) has an identical body mass of 0.450 kg0.450\text{ kg}, but possesses a small intestine length of 210 cm210\text{ cm} with a mean mucosal circumference of 12.0 mm12.0\text{ mm}. Microscopic examination reveals that Specimen Q\text{Q} possesses a mucosal folding amplification factor (villi and microvilli area factor) of Φ=25.0\Phi = 25.0, whereas Specimen P\text{P} has Φ=8.50\Phi = 8.50. (1) Convert all linear metrics to standard SI units (meters\text{meters}) and calculate the absolute mucosal absorptive surface area (Aabs=L⋅C⋅ΦA_{\text{abs}} = L \cdot C \cdot \Phi) in square meters (m2\text{m}^2) for both specimens. (2) Based on the surface area ratio Aabs, QAabs, P\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}}, infer the functional dietary adaptation driving this morphological divergence.

Answer and steps

Final answer

(1) For Specimen P\text{P}: L=0.360 mL = 0.360\text{ m}, C=0.00800 mC = 0.00800\text{ m}, Φ=8.50\Phi = 8.50; Aabs, P=0.360 m×0.00800 m×8.50=2.45×10−2 m2A_{\text{abs, P}} = 0.360\text{ m} \times 0.00800\text{ m} \times 8.50 = 2.45 \times 10^{-2}\text{ m}^2. For Specimen Q\text{Q}: L=2.10 mL = 2.10\text{ m}, C=0.0120 mC = 0.0120\text{ m}, Φ=25.0\Phi = 25.0; Aabs, Q=2.10 m×0.0120 m×25.0=6.30×10−1 m2A_{\text{abs, Q}} = 2.10\text{ m} \times 0.0120\text{ m} \times 25.0 = 6.30 \times 10^{-1}\text{ m}^2. (2) Ratio Aabs, QAabs, P=6.30×10−12.45×10−2≈25.7\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{6.30 \times 10^{-1}}{2.45 \times 10^{-2}} \approx 25.7. Specimen Q\text{Q} requires a vastly expanded absorptive surface area and long retention time to extract low-energy-density nutrients from chemically recalcitrant, fiber-rich foliage, whereas Specimen P\text{P} feeds on nutrient-dense, easily digestible chitin-encased insect tissues.

Steps

01

Unit Conversion to Meters (m\text{m})

Part 1: Conversion of Units and Absorptive Surface Area Calculation

The effective absorptive surface area of a tubular digestive tract is given by: Aabs=L⋅C⋅ΦA_{\text{abs}} = L \cdot C \cdot \Phi where:

  • LL is the length of the intestine,
  • CC is the mean mucosal circumference,
  • Φ\Phi is the microscopic mucosal amplification factor from villi and microvilli.
  • Recall that 1 m=100 cm=1000 mm1\text{ m} = 100\text{ cm} = 1000\text{ mm}.
  • Specimen P\text{P} (Insectivore): LP=36.0 cm⋅1 m100 cm=0.360 mL_{\text{P}} = 36.0\text{ cm} \cdot \frac{1\text{ m}}{100\text{ cm}} = 0.360\text{ m} CP=8.00 mm⋅1 m1000 mm=0.00800 mC_{\text{P}} = 8.00\text{ mm} \cdot \frac{1\text{ m}}{1000\text{ mm}} = 0.00800\text{ m}
  • Specimen Q\text{Q} (Folivore): LQ=210 cm⋅1 m100 cm=2.10 mL_{\text{Q}} = 210\text{ cm} \cdot \frac{1\text{ m}}{100\text{ cm}} = 2.10\text{ m} CQ=12.0 mm⋅1 m1000 mm=0.0120 mC_{\text{Q}} = 12.0\text{ mm} \cdot \frac{1\text{ m}}{1000\text{ mm}} = 0.0120\text{ m}

Common Pitfall: Ensure both millimeters and centimeters are converted to standard meters before computing the product; multiplying mixed metric units yields incorrect orders of magnitude.

02

Compute AabsA_{\text{abs}} for Each Specimen

  • For Specimen P\text{P} (ΦP=8.50\Phi_{\text{P}} = 8.50): Aabs, P=0.360 m⋅0.00800 m⋅8.50=2.448×10−2 m2≈2.45×10−2 m2A_{\text{abs, P}} = 0.360\text{ m} \cdot 0.00800\text{ m} \cdot 8.50 = 2.448 \times 10^{-2}\text{ m}^2 \approx 2.45 \times 10^{-2}\text{ m}^2
  • For Specimen Q\text{Q} (ΦQ=25.0\Phi_{\text{Q}} = 25.0): Aabs, Q=2.10 m⋅0.0120 m⋅25.0=6.30×10−1 m2A_{\text{abs, Q}} = 2.10\text{ m} \cdot 0.0120\text{ m} \cdot 25.0 = 6.30 \times 10^{-1}\text{ m}^2

Part 2: Functional Dietary Adaptation Analysis

01

Calculate the Area Ratio

Aabs, QAabs, P=6.30×10−1 m22.448×10−2 m2≈25.7\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{6.30 \times 10^{-1}\text{ m}^2}{2.448 \times 10^{-2}\text{ m}^2} \approx 25.7

The folivorous mammal possesses approximately 25.725.7 times greater intestinal absorptive surface area than the insectivorous mammal of the exact same body mass (0.450 kg0.450\text{ kg}).

02

Infer the Evolutionary and Functional Adaptation

  • Folivore Diet (Specimen Q\text{Q}): Foliage consists largely of fibrous, cellulose-rich plant cell walls that are structurally recalcitrant, resistant to rapid chemical breakdown, and relatively low in available caloric density. An elongated gut (2.10 m2.10\text{ m} vs. 0.360 m0.360\text{ m}) increases transit and fermentation retention time, while dense mucosal folding (Φ=25.0\Phi = 25.0) provides an immense surface area (0.630 m20.630\text{ m}^2) to maximize nutrient extraction and absorption from a nutrient-poor food source.
  • Insectivore Diet (Specimen P\text{P}): Insects represent a nutrient-dense food source rich in proteins, readily hydrolyzable lipids, and glycogen. Because the chemical breakdown and absorption of animal tissue occur rapidly and yield high energy per unit volume, an insectivore requires only a short intestine and moderate surface folding to satisfy its metabolic requirements.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misconverts millimeters to meters by dividing by 100 instead of 1000, overestimating the surface area of both specimens tenfold.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    L=0.360 m,C=0.0800 m  ⟹  Aabs, P=0.360⋅0.0800⋅8.50=0.2448 m2L = 0.360\text{ m}, C = 0.0800\text{ m} \implies A_{\text{abs, P}} = 0.360 \cdot 0.0800 \cdot 8.50 = 0.2448\text{ m}^2

    Correct

    L=0.360 m,C=0.00800 m  ⟹  Aabs, P=0.360⋅0.00800⋅8.50=2.45×10−2 m2L = 0.360\text{ m}, C = 0.00800\text{ m} \implies A_{\text{abs, P}} = 0.360 \cdot 0.00800 \cdot 8.50 = 2.45 \times 10^{-2}\text{ m}^2

    You converted 8.00 mm8.00\text{ mm} to meters as 0.0800 m0.0800\text{ m}. Because 1 m=1000 mm1\text{ m} = 1000\text{ mm}, dividing 8.008.00 by 10001000 gives 0.00800 m0.00800\text{ m}, leading to Aabs, P≈2.45×10−2 m2A_{\text{abs, P}} \approx 2.45 \times 10^{-2}\text{ m}^2.

  2. Step 2

    L=2.10 m,C=0.120 m  ⟹  Aabs, Q=2.10⋅0.120⋅25.0=6.30 m2L = 2.10\text{ m}, C = 0.120\text{ m} \implies A_{\text{abs, Q}} = 2.10 \cdot 0.120 \cdot 25.0 = 6.30\text{ m}^2

    Correct

    L=2.10 m,C=0.0120 m  ⟹  Aabs, Q=2.10⋅0.0120⋅25.0=6.30×10−1 m2L = 2.10\text{ m}, C = 0.0120\text{ m} \implies A_{\text{abs, Q}} = 2.10 \cdot 0.0120 \cdot 25.0 = 6.30 \times 10^{-1}\text{ m}^2

    You converted 12.0 mm12.0\text{ mm} by dividing by 100100 rather than 10001000. The correct circumference is 0.0120 m0.0120\text{ m}, which gives Aabs, Q=0.630 m2A_{\text{abs, Q}} = 0.630\text{ m}^2.

  3. Step 3

    Aabs, QAabs, P=6.300.2448=25.7\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{6.30}{0.2448} = 25.7

  4. Step 4

    Folivores eat fibrous, nutrient-poor vegetation requiring extensive digestion and a much larger absorptive area than nutrient-dense insects.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted centimeters to standard meters for both specimens.

You applied the surface area formula Aabs=L⋅C⋅ΦA_{\text{abs}} = L \cdot C \cdot \Phi systematically.

You accurately computed the ratio of absorptive surface areas.

You provided a thorough and scientifically sound explanation linking intestinal morphology to folivorous versus insectivorous diets.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion slip (mm to m)

Dividing millimeters by 100100 (as if converting centimeters) instead of dividing by 10001000.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the metric prefix centi- (10−210^{-2}) with milli- (10−310^{-3}) when converting linear dimensions into standard SI base units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Milli- versus Centi- Prefix Recognition
  • 1 m=100 cm=1000 mm1\text{ m} = 100\text{ cm} = 1000\text{ mm}, so 1 mm=10−3 m=0.001 m1\text{ mm} = 10^{-3}\text{ m} = 0.001\text{ m}.

  • Shift the decimal point three places to the left when converting from millimeters to meters.

Biological Scale Sanity Check
  • Compare computed organ dimensions to the animal's overall size and mass.

  • A 0.450 kg0.450\text{ kg} mammal has a total outer body surface area of roughly 0.06 m20.06\text{ m}^2; an internal tubular surface before microvillar amplification cannot have a baseline circumference of 12 cm12\text{ cm} (0.12 m0.12\text{ m}) across a tiny body cavity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. CP=8.00 mm×1 m1000 mm=0.00800 mC_{\text{P}} = 8.00\text{ mm} \times \frac{1\text{ m}}{1000\text{ mm}} = 0.00800\text{ m}

  2. Aabs, P=0.360 m×0.00800 m×8.50=2.45×10−2 m2A_{\text{abs, P}} = 0.360\text{ m} \times 0.00800\text{ m} \times 8.50 = 2.45 \times 10^{-2}\text{ m}^2

  3. CQ=12.0 mm×1 m1000 mm=0.0120 mC_{\text{Q}} = 12.0\text{ mm} \times \frac{1\text{ m}}{1000\text{ mm}} = 0.0120\text{ m}

  4. Aabs, Q=2.10 m×0.0120 m×25.0=6.30×10−1 m2A_{\text{abs, Q}} = 2.10\text{ m} \times 0.0120\text{ m} \times 25.0 = 6.30 \times 10^{-1}\text{ m}^2

Final answer

(1) Aabs, P=2.45×10−2 m2A_{\text{abs, P}} = 2.45 \times 10^{-2}\text{ m}^2, Aabs, Q=6.30×10−1 m2A_{\text{abs, Q}} = 6.30 \times 10^{-1}\text{ m}^2; (2) Ratio ≈25.7\approx 25.7. Folivores require a much greater absorptive area and retention time to process low-energy, fibrous foliage.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check prefix multipliers before multiplying variables: remember that 'milli-' means thousandth (10−310^{-3}), while 'centi-' means hundredth (10−210^{-2}).

  • Perform dimensional analysis with explicit cancellation units (e.g., mm×1 m1000 mm\text{mm} \times \frac{1\text{ m}}{1000\text{ mm}}) to avoid decimal shift errors.

OverviewACEpath Teacher's Diagnosis

02 The student omits the microscopic mucosal amplification factor Φ, calculating only macroscopic nominal cylinder surface area.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Specimen P\text{P}: L=0.360 mL = 0.360\text{ m}, C=0.00800 m  ⟹  Aabs, P=0.360⋅0.00800=0.00288 m2C = 0.00800\text{ m} \implies A_{\text{abs, P}} = 0.360 \cdot 0.00800 = 0.00288\text{ m}^2

    Correct

    Aabs, P=L⋅C⋅Φ=0.360 m×0.00800 m×8.50=2.45×10−2 m2A_{\text{abs, P}} = L \cdot C \cdot \Phi = 0.360\text{ m} \times 0.00800\text{ m} \times 8.50 = 2.45 \times 10^{-2}\text{ m}^2

    You converted the linear dimensions to meters correctly, but you calculated only the nominal macroscopic cylinder area (L⋅CL \cdot C) and omitted the mucosal amplification factor Φ=8.50\Phi = 8.50.

  2. Step 2

    Specimen Q\text{Q}: L=2.10 mL = 2.10\text{ m}, C=0.0120 m  ⟹  Aabs, Q=2.10⋅0.0120=0.0252 m2C = 0.0120\text{ m} \implies A_{\text{abs, Q}} = 2.10 \cdot 0.0120 = 0.0252\text{ m}^2

    Correct

    Aabs, Q=L⋅C⋅Φ=2.10 m×0.0120 m×25.0=0.630 m2A_{\text{abs, Q}} = L \cdot C \cdot \Phi = 2.10\text{ m} \times 0.0120\text{ m} \times 25.0 = 0.630\text{ m}^2

    You converted the dimensions to meters accurately, but you omitted the mucosal amplification factor Φ=25.0\Phi = 25.0 in the formula Aabs=L⋅C⋅ΦA_{\text{abs}} = L \cdot C \cdot \Phi.

  3. Step 3

    Aabs, QAabs, P=0.02520.00288=8.75\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{0.0252}{0.00288} = 8.75

    Correct

    Aabs, QAabs, P=0.630 m22.448×10−2 m2≈25.7\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{0.630\text{ m}^2}{2.448 \times 10^{-2}\text{ m}^2} \approx 25.7

    Your division was carried out correctly using your earlier numbers, but the result is inaccurate because both surface area values omitted Φ\Phi.

  4. Step 4

    Folivores require a larger intestinal surface area to break down tough plant cell walls compared to the easily digested insect diet.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted centimeters and millimeters to standard meters.

You correctly identified that folivores require significantly greater digestive surface area than insectivores of equivalent body mass.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Microscopic Folding Factor

You calculated the macroscopic cylindrical tube area (L⋅CL \cdot C) instead of the total absorptive surface area (L⋅C⋅ΦL \cdot C \cdot \Phi).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating macroscopic gut surface dimensions with true physiological absorptive surface area, which is multiplied by microscopic folds, villi, and microvilli.

REASONING PATH
Your ACEpath teacher’s suggested approach
Include Microscopic Amplification
  • Aabs=L⋅C⋅ΦA_{\text{abs}} = L \cdot C \cdot \Phi

  • Always multiply the macroscopic tube area (L⋅CL \cdot C) by the dimensionless folding factor Φ\Phi when calculating total absorptive surface area.

Propagate Factors into Area Ratios
  • Aabs, QAabs, P=(LQ⋅CQLP⋅CP)×(ΦQΦP)\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \left(\frac{L_{\text{Q}} \cdot C_{\text{Q}}}{L_{\text{P}} \cdot C_{\text{P}}}\right) \times \left(\frac{\Phi_{\text{Q}}}{\Phi_{\text{P}}}\right)

  • Account for both macroscopic volume/length adaptations and microscopic folding adaptations when comparing digestive surface area ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate true Aabs, PA_{\text{abs, P}}: 0.360 m×0.00800 m×8.50=2.448×10−2 m20.360\text{ m} \times 0.00800\text{ m} \times 8.50 = 2.448 \times 10^{-2}\text{ m}^2

  2. Calculate true Aabs, QA_{\text{abs, Q}}: 2.10 m×0.0120 m×25.0=0.630 m22.10\text{ m} \times 0.0120\text{ m} \times 25.0 = 0.630\text{ m}^2

  3. Compute the corrected ratio: 0.6300.02448≈25.7\frac{0.630}{0.02448} \approx 25.7

Final answer

(1) Aabs, P≈2.45×10−2 m2A_{\text{abs, P}} \approx 2.45 \times 10^{-2}\text{ m}^2, Aabs, Q=6.30×10−1 m2A_{\text{abs, Q}} = 6.30 \times 10^{-1}\text{ m}^2; (2) Aabs, QAabs, P≈25.7\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} \approx 25.7. Specimen Q\text{Q} requires an expanded surface area to absorb nutrients from recalcitrant, fiber-rich foliage.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how villi and microvilli geometrically amplify internal tubular surface area.

  • Practice multi-variable biophysical scaling problems to ensure every given coefficient is incorporated into the calculation.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets circumference as radius and squares it using the circle area formula πr² instead of L · C · Φ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Specimen P: L=0.360 mL = 0.360\text{ m}, r=0.00800 m  ⟹  Aabs, P=3.14⋅(0.00800)2⋅8.50=0.00171 m2r = 0.00800\text{ m} \implies A_{\text{abs, P}} = 3.14 \cdot (0.00800)^2 \cdot 8.50 = 0.00171\text{ m}^2

    Correct

    L=0.360 mL = 0.360\text{ m}, C=0.00800 m  ⟹  Aabs, P=0.360 m×0.00800 m×8.50≈2.45×10−2 m2C = 0.00800\text{ m} \implies A_{\text{abs, P}} = 0.360\text{ m} \times 0.00800\text{ m} \times 8.50 \approx 2.45 \times 10^{-2}\text{ m}^2

    You converted the units to meters correctly, but you treated the mean mucosal circumference as a radius rr and calculated πr2⋅Φ\pi r^2 \cdot \Phi. The intestinal absorptive surface is a hollow tube whose unrolled lateral area is length times circumference (L⋅CL \cdot C), amplified by Φ\Phi.

  2. Step 2

    Specimen Q: L=2.10 mL = 2.10\text{ m}, r=0.0120 m  ⟹  Aabs, Q=3.14⋅(0.0120)2⋅25.0=0.0113 m2r = 0.0120\text{ m} \implies A_{\text{abs, Q}} = 3.14 \cdot (0.0120)^2 \cdot 25.0 = 0.0113\text{ m}^2

    Correct

    L=2.10 mL = 2.10\text{ m}, C=0.0120 m  ⟹  Aabs, Q=2.10 m×0.0120 m×25.0=6.30×10−1 m2C = 0.0120\text{ m} \implies A_{\text{abs, Q}} = 2.10\text{ m} \times 0.0120\text{ m} \times 25.0 = 6.30 \times 10^{-1}\text{ m}^2

    You repeated the same formula error for Specimen Q\text{Q}, squaring the circumference as a radius instead of multiplying length by circumference (L⋅C⋅ΦL \cdot C \cdot \Phi).

  3. Step 3

    Aabs, QAabs, P=0.01130.00171=6.61\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{0.0113}{0.00171} = 6.61

    Correct

    Aabs, QAabs, P=6.30×10−1 m22.448×10−2 m2≈25.7\frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{6.30 \times 10^{-1}\text{ m}^2}{2.448 \times 10^{-2}\text{ m}^2} \approx 25.7

    Your division step correctly followed your previous values, but the ratio was thrown off by the omission of the length ratio and the squaring of circumferences in steps 1 and 2.

  4. Step 4

    Folivores need greater intestinal capacity because plant matter is fibrous and harder to extract nutrients from than insects.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted centimeters and millimeters to standard meters without error.

You correctly reasoned that folivores need substantially greater digestive capacity due to fibrous, nutrient-poor plant diets.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometry Formula Confusion

You relabeled the given circumference CC as radius rr and applied the cross-sectional circle area formula πr2\pi r^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated cross-sectional area (a transverse slice across a tube, πr2\pi r^2) with lateral inner surface area (the unwrapped wall of a cylinder, L⋅CL \cdot C).

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-section vs. Lining Area
  • Lumen cross-sectional area is πr2\pi r^2, but the inner absorptive wall is a cylinder of area A=L×C=L×(2πr)A = L \times C = L \times (2\pi r).

  • Picture slitting the intestinal tube lengthwise and flattening it into a rectangle of length LL and width CC.

Check Given Variables in the Prompt
  • When a formula such as Aabs=L⋅C⋅ΦA_{\text{abs}} = L \cdot C \cdot \Phi is explicitly defined, use each named variable directly.

  • Match LL, CC, and Φ\Phi directly to the values given in the prompt before writing down any calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Aabs, P=0.360 m×0.00800 m×8.50=2.448×10−2 m2≈2.45×10−2 m2A_{\text{abs, P}} = 0.360\text{ m} \times 0.00800\text{ m} \times 8.50 = 2.448 \times 10^{-2}\text{ m}^2 \approx 2.45 \times 10^{-2}\text{ m}^2

  2. Aabs, Q=2.10 m×0.0120 m×25.0=0.630 m2=6.30×10−1 m2A_{\text{abs, Q}} = 2.10\text{ m} \times 0.0120\text{ m} \times 25.0 = 0.630\text{ m}^2 = 6.30 \times 10^{-1}\text{ m}^2

  3. Ratio=Aabs, QAabs, P=0.6300.02448≈25.7\text{Ratio} = \frac{A_{\text{abs, Q}}}{A_{\text{abs, P}}} = \frac{0.630}{0.02448} \approx 25.7

Final answer

(1) Aabs, P=2.45×10−2 m2A_{\text{abs, P}} = 2.45 \times 10^{-2}\text{ m}^2, Aabs, Q=6.30×10−1 m2A_{\text{abs, Q}} = 6.30 \times 10^{-1}\text{ m}^2; (2) Ratio ≈25.7\approx 25.7. Specimen Q\text{Q} requires a much larger surface area to extract energy from nutrient-poor, cellulose-rich foliage compared to the nutrient-dense insect diet of Specimen P\text{P}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric relationship between circumference, radius, and the unrolled surface area of a cylinder.

  • Practice matching problem variables directly with provided anatomical formulas rather than substituting generic geometric formulas from memory.

Lock it in

Similar question

01

A rodent's small intestine has a length of 45.0 cm45.0\text{ cm}, a mean mucosal circumference of 6.00 mm6.00\text{ mm}, and an amplification factor of Φ=12.0\Phi = 12.0. Calculate its absolute absorptive surface area (Aabs=L⋅C⋅ΦA_{\text{abs}} = L \cdot C \cdot \Phi) in square meters (m2\text{m}^2).

Answer

3.24×10−2 m23.24 \times 10^{-2}\text{ m}^2. Convert units: L=0.450 mL = 0.450\text{ m} and C=0.00600 mC = 0.00600\text{ m}. Then compute Aabs=0.450×0.00600×12.0=0.0324 m2=3.24×10−2 m2A_{\text{abs}} = 0.450 \times 0.00600 \times 12.0 = 0.0324\text{ m}^2 = 3.24 \times 10^{-2}\text{ m}^2.

02

A carnivore has an intestinal length of 1.20 m1.20\text{ m}, circumference of 20.0 mm20.0\text{ mm}, and Φ=10.0\Phi = 10.0. An herbivore of equal body mass has an intestinal length of 4.80 m4.80\text{ m}, circumference of 30.0 mm30.0\text{ mm}, and Φ=35.0\Phi = 35.0. Find the ratio of the herbivore's absorptive surface area to the carnivore's absorptive surface area.

Answer

21.021.0. For the carnivore, Acarn=1.20 m×0.0200 m×10.0=0.240 m2A_{\text{carn}} = 1.20\text{ m} \times 0.0200\text{ m} \times 10.0 = 0.240\text{ m}^2. For the herbivore, Aherb=4.80 m×0.0300 m×35.0=5.04 m2A_{\text{herb}} = 4.80\text{ m} \times 0.0300\text{ m} \times 35.0 = 5.04\text{ m}^2. Ratio = 5.040.240=21.0\frac{5.04}{0.240} = 21.0.

03

Two bird species have small intestines of identical length (0.500 m0.500\text{ m}) and circumference (10.0 mm10.0\text{ mm}). Species A feeds on nectar (simple sugars) and has an absorptive area of 0.0400 m20.0400\text{ m}^2. Species B feeds on seeds (complex starches and proteins) and has an absorptive area of 0.120 m20.120\text{ m}^2. Determine the mucosal amplification factor Φ\Phi for each species and explain the physiological reason for the difference.

Answer

ΦA=8.00\Phi_{\text{A}} = 8.00 and ΦB=24.0\Phi_{\text{B}} = 24.0. Baseline tube area is L⋅C=0.500 m×0.0100 m=0.00500 m2L \cdot C = 0.500\text{ m} \times 0.0100\text{ m} = 0.00500\text{ m}^2. Thus ΦA=0.04000.00500=8.00\Phi_{\text{A}} = \frac{0.0400}{0.00500} = 8.00, and ΦB=0.1200.00500=24.0\Phi_{\text{B}} = \frac{0.120}{0.00500} = 24.0. Seed diets require greater contact surface and membrane-bound transport enzyme density to hydrolyze and absorb complex nutrients compared to rapidly absorbed simple nectar sugars.

Loading workspace…