Resources

Consider the scaling of respiratory gas exchange in spherical organisms. Under Fick's first law of diffusion, the diffusive influx of oxygen per unit time is J=−D⋅A⋅ΔPO2ΔxJ = -D \cdot A \cdot \frac{\Delta P_{\text{O}_2}}{\Delta x}, while the metabolic oxygen consumption rate scales directly with biological volume: Rconsumption=kmet⋅VR_{\text{consumption}} = k_{\text{met}} \cdot V, where kmet=2.4×10−4 mol⋅m−3⋅s−1k_{\text{met}} = 2.4\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1} at 20∘C20^\circ\text{C}. For a spherical organism of radius rr, surface area is A=4πr2A = 4\pi r^2 and volume is V=43πr3V = \frac{4}{3}\pi r^3. Given an aqueous diffusion constant D=2.0×10−9 m2⋅s−1D = 2.0\times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}, an effective diffusion gradient spanning boundary layer thickness Δx=50 μm=5.0×10−5 m\Delta x = 50\ \mu\text{m} = 5.0\times 10^{-5}\text{ m}, and a partial pressure concentration difference across the membrane of ΔC=0.20 mol⋅m−3\Delta C = 0.20\text{ mol}\cdot\text{m}^{-3}, determine the critical asymptotic upper radius limit (rmaxr_{\text{max}}) beyond which an acoelomate animal lacking a circulatory system cannot survive on pure external surface diffusion.

Answer and steps

Final answer

rmax=3DΔCkmetΔx=3(2.0×10−9 m2⋅s−1)(0.20 mol⋅m−3)(2.4×10−4 mol⋅m−3⋅s−1)(5.0×10−5 m)=0.10 m=10 cmr_{\text{max}} = \frac{3 D \Delta C}{k_{\text{met}} \Delta x} = \frac{3 (2.0\times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}) (0.20\text{ mol}\cdot\text{m}^{-3})}{(2.4\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1})(5.0\times 10^{-5}\text{ m})} = 0.10\text{ m} = 10\text{ cm} (for a theoretical spherical geometry; in planar flatworms, body thickness 2t2t must satisfy t≤0.50 mmt \le 0.50\text{ mm}, driving the extreme dorsoventral flattening observed in Platyhelminthes).

Steps

01

Balance of Oxygen Supply and Demand

For an organism relying entirely on cutaneous diffusion without a circulatory system, the total rate of oxygen intake through its surface area must be at least equal to its total metabolic oxygen consumption rate:

Jsupply≥RconsumptionJ_{\text{supply}} \ge R_{\text{consumption}}

From Fick's first law of diffusion, the maximum diffusive influx of oxygen into the spherical organism across boundary layer thickness Δx\Delta x is:

Jsupply=D⋅A⋅ΔCΔxJ_{\text{supply}} = D \cdot A \cdot \frac{\Delta C}{\Delta x}

The metabolic oxygen demand scales directly with biological tissue volume:

Rconsumption=kmet⋅VR_{\text{consumption}} = k_{\text{met}} \cdot V


02

Geometric Scaling for a Spherical Organism

For a sphere of radius rr:

  • Surface area: A=4πr2A = 4\pi r^2
  • Volume: V=43πr3V = \frac{4}{3}\pi r^3

Substituting these geometric relations into the balance equation gives:

D⋅(4πr2)⋅ΔCΔx≥kmet⋅(43πr3)D \cdot (4\pi r^2) \cdot \frac{\Delta C}{\Delta x} \ge k_{\text{met}} \cdot \left(\frac{4}{3}\pi r^3\right)

Dividing both sides by the common factor 4πr24\pi r^2 (assuming r>0r > 0):

D⋅ΔCΔx≥13kmet⋅r\frac{D \cdot \Delta C}{\Delta x} \ge \frac{1}{3} k_{\text{met}} \cdot r

Rearranging for the upper limit of the radius, rmaxr_{\text{max}}:

rmax=3DΔCkmetΔxr_{\text{max}} = \frac{3 D \Delta C}{k_{\text{met}} \Delta x}


03

Numerical Calculation

Substitute the given physiological and physical constants:

  • D=2.0×10−9 m2⋅s−1D = 2.0\times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}
  • ΔC=0.20 mol⋅m−3\Delta C = 0.20\text{ mol}\cdot\text{m}^{-3}
  • kmet=2.4×10−4 mol⋅m−3⋅s−1k_{\text{met}} = 2.4\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}
  • Δx=5.0×10−5 m\Delta x = 5.0\times 10^{-5}\text{ m}

rmax=3⋅(2.0×10−9 m2⋅s−1)⋅(0.20 mol⋅m−3)(2.4×10−4 mol⋅m−3⋅s−1)⋅(5.0×10−5 m)r_{\text{max}} = \frac{3 \cdot (2.0\times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}) \cdot (0.20\text{ mol}\cdot\text{m}^{-3})}{(2.4\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}) \cdot (5.0\times 10^{-5}\text{ m})}

Evaluating the numerator and denominator:

Numerator=1.20×10−9 mol⋅m−1⋅s−1\text{Numerator} = 1.20 \times 10^{-9}\text{ mol}\cdot\text{m}^{-1}\cdot\text{s}^{-1}

Denominator=1.20×10−8 mol⋅m−2⋅s−1\text{Denominator} = 1.20 \times 10^{-8}\text{ mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1}

rmax=1.20×10−91.20×10−8=0.10 m=10 cmr_{\text{max}} = \frac{1.20 \times 10^{-9}}{1.20 \times 10^{-8}} = 0.10\text{ m} = 10\text{ cm}


04

Biological Significance and Body Plan Adaptations

  • Theoretical limit vs. internal gradient: The calculated 10 cm10\text{ cm} radius assumes an idealized scenario where the organism's entire interior maintains an adequate oxygen concentration right up to the center.
  • Internal diffusion constraint: In reality, internal diffusion resistance inside solid biological tissue creates a severe internal steep drop in O2\text{O}_2. To ensure the core tissues do not become anoxic without convective transport (blood vessels), diffusion distances must be less than roughly 0.5 mm0.5\text{ mm} to 1.0 mm1.0\text{ mm}.
  • Acoelomate morphology: This physical constraint explains why acoelomate animals such as flatworms (phylum Platyhelminthes) avoid a thick spherical shape and instead adopt extremely thin, ribbon-like, or dorsoventrally flattened body forms, keeping diffusion distance small while maximizing the surface-area-to-volume ratio (A/VA/V).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the factor of 1/3 arising from the spherical volume formula V = (4/3)πr³, leading to an answer that is one-third of the correct value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    J=Rconsumption  ⟹  D⋅(4πr2)⋅ΔCΔx=kmet⋅(4πr3)J = R_{\text{consumption}} \implies D \cdot (4\pi r^2) \cdot \frac{\Delta C}{\Delta x} = k_{\text{met}} \cdot (4\pi r^3)

    Correct

    J=Rconsumption  ⟹  D⋅(4πr2)⋅ΔCΔx=kmet⋅(43πr3)J = R_{\text{consumption}} \implies D \cdot (4\pi r^2) \cdot \frac{\Delta C}{\Delta x} = k_{\text{met}} \cdot \left(\frac{4}{3}\pi r^3\right)

    You correctly balanced diffusive intake with metabolic demand, but you used V=4πr3V = 4\pi r^3 instead of the correct volume formula for a sphere, V=43πr3V = \frac{4}{3}\pi r^3.

  2. Step 2

    rmax=D⋅ΔCkmet⋅Δxr_{\text{max}} = \frac{D \cdot \Delta C}{k_{\text{met}} \cdot \Delta x}

    Correct

    rmax=3DΔCkmetΔxr_{\text{max}} = \frac{3D \Delta C}{k_{\text{met}} \Delta x}

    You cancelled common factors algebraically according to your previous line, but because the factor of 13\frac{1}{3} was missing in the volume term, your expression is missing the factor of 33 in the numerator.

  3. Step 3

    rmax=2.0×10−9⋅0.202.4×10−4⋅5.0×10−5r_{\text{max}} = \frac{2.0\times 10^{-9} \cdot 0.20}{2.4\times 10^{-4} \cdot 5.0\times 10^{-5}}

    Correct

    rmax=3⋅(2.0×10−9)⋅0.20(2.4×10−4)⋅(5.0×10−5)r_{\text{max}} = \frac{3 \cdot (2.0\times 10^{-9}) \cdot 0.20}{(2.4\times 10^{-4}) \cdot (5.0\times 10^{-5})}

    You correctly substituted all physical and physiological constants into your derived formula, but the expression was still missing the factor of 33.

  4. Step 4

    rmax=0.033 mr_{\text{max}} = 0.033\text{ m}

    Correct

    rmax=0.10 mr_{\text{max}} = 0.10\text{ m}

    Your arithmetic was accurate for your formula, but the propagated error from the missing volume factor made your final radius 0.033 m0.033\text{ m} instead of 0.10 m0.10\text{ m} (10 cm10\text{ cm}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the critical limit occurs when diffusive oxygen supply equals metabolic oxygen consumption.

You accurately stated and applied Fick's first law of diffusion across the boundary layer.

You substituted all numerical constants with matching SI units and executed the arithmetic correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometric Formula Error

You wrote the volume of a sphere as 4πr34\pi r^3 rather than 43πr3\frac{4}{3}\pi r^3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the surface area coefficient (4π4\pi) with the volume formula leads to dropping the fraction 43\frac{4}{3}. In surface-area-to-volume ratio derivations for spheres, AV=4πr243πr3=3r\frac{A}{V} = \frac{4\pi r^2}{\frac{4}{3}\pi r^3} = \frac{3}{r}, which produces the crucial factor of 33 in the final scaling relation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sphere Geometric Formulas
  • For a sphere of radius rr, the surface area is A=4πr2A = 4\pi r^2 and the volume is V=43πr3V = \frac{4}{3}\pi r^3.

  • Always verify the 43\frac{4}{3} coefficient when writing the volume of a sphere, or use the ratio AV=3r\frac{A}{V} = \frac{3}{r} directly.

Surface-Area-to-Volume Ratio Check
  • Equating surface flux (J∝AJ \propto A) to volumetric demand (R∝VR \propto V) always yields a balance proportional to AV=3r\frac{A}{V} = \frac{3}{r}.

  • Check that the factor of 33 appears in the numerator of your critical radius expression before plugging in numbers.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute V=43πr3V = \frac{4}{3}\pi r^3 into the rate balance: D⋅(4πr2)⋅ΔCΔx=kmet⋅(43πr3)D \cdot (4\pi r^2) \cdot \frac{\Delta C}{\Delta x} = k_{\text{met}} \cdot \left(\frac{4}{3}\pi r^3\right).

  2. Divide both sides by 4πr24\pi r^2: DΔCΔx=13kmetr\frac{D \Delta C}{\Delta x} = \frac{1}{3} k_{\text{met}} r.

  3. Multiply both sides by 33 and divide by kmetk_{\text{met}}: rmax=3DΔCkmetΔxr_{\text{max}} = \frac{3 D \Delta C}{k_{\text{met}} \Delta x}.

  4. Evaluate numerically: rmax=3⋅(2.0×10−9 m2⋅s−1)⋅(0.20 mol⋅m−3)(2.4×10−4 mol⋅m−3⋅s−1)⋅(5.0×10−5 m)=1.20×10−91.20×10−8=0.10 mr_{\text{max}} = \frac{3 \cdot (2.0\times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}) \cdot (0.20\text{ mol}\cdot\text{m}^{-3})}{(2.4\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}) \cdot (5.0\times 10^{-5}\text{ m})} = \frac{1.20\times 10^{-9}}{1.20\times 10^{-8}} = 0.10\text{ m}.

Final answer

rmax=0.10 m=10 cmr_{\text{max}} = 0.10\text{ m} = 10\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving surface-area-to-volume ratios for common biological geometries (sphere, cylinder, flat sheet) to ensure geometric constants are never omitted.

  • Double-check dimensional formulas before cancelling variables during allometric scaling derivations.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio during algebraic rearrangement, solving for r as (k_met · Δx) / (3 · D · ΔC).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    D⋅(4πr2)⋅(ΔCΔx)=kmet⋅(43πr3)  ⟹  D⋅(ΔCΔx)=13kmet⋅rD \cdot (4\pi r^2) \cdot \left(\frac{\Delta C}{\Delta x}\right) = k_{\text{met}} \cdot \left(\frac{4}{3}\pi r^3\right) \implies D \cdot \left(\frac{\Delta C}{\Delta x}\right) = \frac{1}{3} k_{\text{met}} \cdot r

  2. Step 2

    rmax=kmet⋅Δx3⋅D⋅ΔCr_{\text{max}} = \frac{k_{\text{met}} \cdot \Delta x}{3 \cdot D \cdot \Delta C}

    Correct

    rmax=3DΔCkmetΔxr_{\text{max}} = \frac{3 D \Delta C}{k_{\text{met}} \Delta x}

    When solving D⋅(ΔCΔx)=13kmet⋅rD \cdot \left(\frac{\Delta C}{\Delta x}\right) = \frac{1}{3} k_{\text{met}} \cdot r for rr, you need to divide both sides by kmetk_{\text{met}} and multiply by 33, which places 3DΔC3 D \Delta C in the numerator and kmetΔxk_{\text{met}} \Delta x in the denominator.

  3. Step 3

    rmax=2.4×10−4⋅5.0×10−53⋅2.0×10−9⋅0.20  ⟹  rmax=10 mr_{\text{max}} = \frac{2.4 \times 10^{-4} \cdot 5.0 \times 10^{-5}}{3 \cdot 2.0 \times 10^{-9} \cdot 0.20} \implies r_{\text{max}} = 10\text{ m}

    Correct

    rmax=3⋅(2.0×10−9)⋅0.20(2.4×10−4)⋅(5.0×10−5)=0.10 mr_{\text{max}} = \frac{3 \cdot (2.0 \times 10^{-9}) \cdot 0.20}{(2.4 \times 10^{-4}) \cdot (5.0 \times 10^{-5})} = 0.10\text{ m}

    Your arithmetic follows correctly from your inverted expression, but because the formula was inverted, your final radius is 10 m10\text{ m} instead of 0.10 m0.10\text{ m} (10 cm10\text{ cm}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated Fickian surface influx to volumetric metabolic demand.

You accurately substituted the surface area 4πr24\pi r^2 and volume 43πr3\frac{4}{3}\pi r^3 formulas for a sphere.

You correctly simplified the geometric scaling factor down to rr on the right side.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion during variable isolation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the divisor and dividend when rearranging the linear relation A=13B⋅rA = \frac{1}{3} B \cdot r, placing the terms multiplying rr in the numerator instead of dividing by them.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating a variable from a product
  • To solve P=Q⋅rP = Q \cdot r, divide both sides by QQ so that r=PQr = \frac{P}{Q}, not QP\frac{Q}{P}.

  • Identify all factors multiplying rr as a single group, then move them to the opposite denominator.

Dimensional and physical sanity check
  • As diffusion constant DD or concentration gradient ΔC\Delta C increases, the allowable organism size rmaxr_{\text{max}} must increase, so DD and ΔC\Delta C must reside in the numerator.

  • Check whether higher external oxygen availability increases or decreases your calculated maximum survival size.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the simplified balance equation: D⋅ΔCΔx=13kmet⋅rD \cdot \frac{\Delta C}{\Delta x} = \frac{1}{3} k_{\text{met}} \cdot r.

  2. Multiply both sides by 33: 3DΔCΔx=kmet⋅r\frac{3 D \Delta C}{\Delta x} = k_{\text{met}} \cdot r.

  3. Divide both sides by kmetk_{\text{met}}: rmax=3DΔCkmetΔxr_{\text{max}} = \frac{3 D \Delta C}{k_{\text{met}} \Delta x}.

  4. Substitute the values: rmax=3⋅(2.0×10−9 m2⋅s−1)⋅(0.20 mol⋅m−3)(2.4×10−4 mol⋅m−3⋅s−1)⋅(5.0×10−5 m)=1.20×10−91.20×10−8=0.10 mr_{\text{max}} = \frac{3 \cdot (2.0\times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}) \cdot (0.20\text{ mol}\cdot\text{m}^{-3})}{(2.4\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}) \cdot (5.0\times 10^{-5}\text{ m})} = \frac{1.20\times 10^{-9}}{1.20\times 10^{-8}} = 0.10\text{ m}.

Final answer

rmax=0.10 m=10 cmr_{\text{max}} = 0.10\text{ m} = 10\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables from three-part fractional equations without combining multiple inversion steps in your head.

  • Perform a quick qualitative proportionality check: larger metabolic rate kmetk_{\text{met}} must shrink rmaxr_{\text{max}}, so kmetk_{\text{met}} must be in the denominator.

OverviewACEpath Teacher's Diagnosis

03 The student uses the boundary layer thickness in micrometers without converting it to meters, yielding a result 10⁵ times too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    D⋅A⋅ΔCΔx=kmet⋅V  ⟹  rmax=3⋅D⋅ΔCkmet⋅ΔxD \cdot A \cdot \frac{\Delta C}{\Delta x} = k_{\text{met}} \cdot V \implies r_{\text{max}} = \frac{3 \cdot D \cdot \Delta C}{k_{\text{met}} \cdot \Delta x}

  2. Step 2

    rmax=3⋅2.0×10−9⋅0.202.4×10−4⋅50r_{\text{max}} = \frac{3 \cdot 2.0 \times 10^{-9} \cdot 0.20}{2.4 \times 10^{-4} \cdot 50}

    Correct

    rmax=3⋅(2.0×10−9 m2⋅s−1)⋅(0.20 mol⋅m−3)(2.4×10−4 mol⋅m−3⋅s−1)⋅(5.0×10−5 m)r_{\text{max}} = \frac{3 \cdot (2.0 \times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}) \cdot (0.20\text{ mol}\cdot\text{m}^{-3})}{(2.4 \times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}) \cdot (5.0 \times 10^{-5}\text{ m})}

    You plugged in the boundary layer thickness Δx\Delta x as 5050 instead of converting 50 μm50\ \mu\text{m} to SI units (5.0×10−5 m5.0 \times 10^{-5}\text{ m}).

  3. Step 3

    rmax=1.2×10−91.2×10−2  ⟹  rmax=1.0×10−7 mr_{\text{max}} = \frac{1.2 \times 10^{-9}}{1.2 \times 10^{-2}} \implies r_{\text{max}} = 1.0 \times 10^{-7}\text{ m}

    Correct

    rmax=1.20×10−91.20×10−8=0.10 m=10 cmr_{\text{max}} = \frac{1.20 \times 10^{-9}}{1.20 \times 10^{-8}} = 0.10\text{ m} = 10\text{ cm}

    Your arithmetic on the numbers you wrote was calculated correctly, but the result is 10610^6 times too small due to the unconverted unit in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated diffusive supply with metabolic demand.

You accurately substituted the surface area and volume of a sphere to isolate rmaxr_{\text{max}} symbolically.

You performed the scientific-notation arithmetic accurately based on your substituted numbers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted a quantity given in micrometers directly into an expression where all other variables were in standard SI base units (meters), missing the factor of 10−6 m/μm10^{-6}\text{ m}/\mu\text{m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Consistency Check
  • All physical quantities in a formula must be expressed in compatible coherent SI units (meters, seconds, moles) before numerical calculation.

  • Always explicitly write out the units alongside the numbers during substitution, converting prefixes like micro- (μ=10−6\mu = 10^{-6}) into base units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute Δx=50 μm=5.0×10−5 m\Delta x = 50\ \mu\text{m} = 5.0 \times 10^{-5}\text{ m} into the denominator: rmax=3⋅(2.0×10−9)⋅0.20(2.4×10−4)⋅(5.0×10−5)r_{\text{max}} = \frac{3 \cdot (2.0 \times 10^{-9}) \cdot 0.20}{(2.4 \times 10^{-4}) \cdot (5.0 \times 10^{-5})}

  2. Evaluate the denominator: (2.4×10−4)⋅(5.0×10−5)=1.20×10−8(2.4 \times 10^{-4}) \cdot (5.0 \times 10^{-5}) = 1.20 \times 10^{-8}

  3. Divide numerator by denominator: rmax=1.20×10−91.20×10−8=0.10 mr_{\text{max}} = \frac{1.20 \times 10^{-9}}{1.20 \times 10^{-8}} = 0.10\text{ m}

Final answer

rmax=0.10 m=10 cmr_{\text{max}} = 0.10\text{ m} = 10\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional units explicitly during substitution to ensure all lengths cancel to meters.

  • Review common SI metric prefixes: 1 μm=10−6 m1\ \mu\text{m} = 10^{-6}\text{ m}, 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}, and 1 cm=10−2 m1\text{ cm} = 10^{-2}\text{ m}.

  • Sanity-check whether an organism with a critical radius of 0.1 μm0.1\ \mu\text{m} (smaller than most bacteria) makes biological sense for an acoelomate animal.

Lock it in

Similar question

01

A spherical marine bacterium relies on surface diffusion to supply oxygen. Given an inward flux per unit surface area of j=1.8×10−5 mol⋅m−2⋅s−1j = 1.8\times 10^{-5}\text{ mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1} and a volumetric metabolic demand of kmet=0.54 mol⋅m−3⋅s−1k_{\text{met}} = 0.54\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}, calculate its maximum sustainable radius rmaxr_{\text{max}}.

Answer

rmax=1.0×10−4 m=100 μmr_{\text{max}} = 1.0\times 10^{-4}\text{ m} = 100\ \mu\text{m}. Key steps: Balance j⋅A=kmet⋅V  ⟹  j(4πr2)=kmet(43πr3)  ⟹  rmax=3jkmet=3(1.8×10−5)0.54=1.0×10−4 mj \cdot A = k_{\text{met}} \cdot V \implies j(4\pi r^2) = k_{\text{met}}\left(\frac{4}{3}\pi r^3\right) \implies r_{\text{max}} = \frac{3j}{k_{\text{met}}} = \frac{3(1.8\times 10^{-5})}{0.54} = 1.0\times 10^{-4}\text{ m}.

02

Consider an elongate cylindrical worm of radius rr and length LL (L≫rL \gg r) where gas exchange occurs across the lateral surface (A=2πrLA = 2\pi r L) and metabolic demand occupies volume V=πr2LV = \pi r^2 L. Derive the expression for rmaxr_{\text{max}} in terms of surface flux jj and metabolic rate kmetk_{\text{met}}, and calculate rmaxr_{\text{max}} if j=6.0×10−6 mol⋅m−2⋅s−1j = 6.0\times 10^{-6}\text{ mol}\cdot\text{m}^{-2}\cdot\text{s}^{-1} and kmet=3.0×10−4 mol⋅m−3⋅s−1k_{\text{met}} = 3.0\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}.

Answer

rmax=2jkmet=0.040 m=4.0 cmr_{\text{max}} = \frac{2j}{k_{\text{met}}} = 0.040\text{ m} = 4.0\text{ cm}. Key steps: Set j(2πrL)=kmet(πr2L)  ⟹  2j=kmetr  ⟹  rmax=2jkmetj(2\pi r L) = k_{\text{met}}(\pi r^2 L) \implies 2j = k_{\text{met}} r \implies r_{\text{max}} = \frac{2j}{k_{\text{met}}}. Notice the geometric factor is 22 for a cylinder, compared to 33 for a sphere.

03

A flatworm (Platyhelminthes) can be modeled as a thin rectangular prism of thickness 2t2t, width WW, and length LL (W,L≫tW, L \gg t), exchanging gases across its top and bottom dorsal-ventral surfaces (A≈2WLA \approx 2WL) with volume V=2tWLV = 2tWL. Using D=1.5×10−9 m2⋅s−1D = 1.5\times 10^{-9}\text{ m}^2\cdot\text{s}^{-1}, Δx=40 μm=4.0×10−5 m\Delta x = 40\ \mu\text{m} = 4.0\times 10^{-5}\text{ m}, ΔC=0.16 mol⋅m−3\Delta C = 0.16\text{ mol}\cdot\text{m}^{-3}, and kmet=3.0×10−4 mol⋅m−3⋅s−1k_{\text{met}} = 3.0\times 10^{-4}\text{ mol}\cdot\text{m}^{-3}\cdot\text{s}^{-1}, find the maximum half-thickness tmaxt_{\text{max}}. Explain why this morphology allows the animal to grow large without a circulatory system.

Answer

tmax=0.020 m=2.0 cmt_{\text{max}} = 0.020\text{ m} = 2.0\text{ cm}. Key steps: J=D⋅(2WL)⋅ΔCΔx=kmet⋅(2tWL)  ⟹  tmax=DΔCkmetΔx=(1.5×10−9)(0.16)(3.0×10−4)(4.0×10−5)=0.020 mJ = D \cdot (2WL) \cdot \frac{\Delta C}{\Delta x} = k_{\text{met}} \cdot (2tWL) \implies t_{\text{max}} = \frac{D \Delta C}{k_{\text{met}} \Delta x} = \frac{(1.5\times 10^{-9})(0.16)}{(3.0\times 10^{-4})(4.0\times 10^{-5})} = 0.020\text{ m}. In planar geometry, AV=1t\frac{A}{V} = \frac{1}{t}, which is independent of length LL and width WW; thus, the flatworm can expand in surface area and total mass arbitrarily while maintaining an adequate diffusion supply, as long as thickness 2t2t remains small.

Loading workspace…