Resources

An analytical biochemistry laboratory standardizes a DNA ligation protocol that requires expressing vector and insert quantities in picomoles (pmol\text{pmol}). A researcher possesses 125 ng125\text{ ng} of an 8.20 kb8.20\text{ kb} linearized plasmid vector. Assuming the average molar mass of a standard double-stranded DNA base pair is 660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp}): (a) calculate the quantity of the linearized vector in picomoles (pmol\text{pmol}), and (b) determine the required mass in nanograms (ng\text{ng}) of a 1.40 kb1.40\text{ kb} insert necessary to achieve an exact 4.00:14.00:1 molar ratio of insert to vector.

Answer and steps

Final answer

(a) 2.31×10−2 pmol2.31 \times 10^{-2}\text{ pmol}; (b) 85.4 ng85.4\text{ ng}.

Steps

Part (a): Quantity of Linearized Vector in Picomoles

  1. Calculate the molecular weight (molar mass) of the vector: A kilobase pair (kb\text{kb}) contains 1,0001{,}000 base pairs (bp\text{bp}). Thus, the size of the linearized vector is: Sizev=8.20 kb=8,200 bp\text{Size}_v = 8.20\text{ kb} = 8{,}200\text{ bp} Using the average molecular weight of 660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp}) for double-stranded DNA: Mv=8,200 bp⋅660 g/(mol⋅bp)=5.412×106 g/molM_v = 8{,}200\text{ bp} \cdot 660\text{ g}/(\text{mol}\cdot\text{bp}) = 5.412 \times 10^6\text{ g/mol}
  2. Convert the vector mass to grams: Massv=125 ng=125×10−9 g=1.25×10−7 g\text{Mass}_v = 125\text{ ng} = 125 \times 10^{-9}\text{ g} = 1.25 \times 10^{-7}\text{ g}
  3. Determine the moles and convert to picomoles (pmol\text{pmol}): nv=MassvMv=1.25×10−7 g5.412×106 g/mol≈2.3097×10−14 moln_v = \frac{\text{Mass}_v}{M_v} = \frac{1.25 \times 10^{-7}\text{ g}}{5.412 \times 10^6\text{ g/mol}} \approx 2.3097 \times 10^{-14}\text{ mol} Since 1 mol=1012 pmol1\text{ mol} = 10^{12}\text{ pmol}: nv=2.3097×10−14 mol⋅1012 pmol/mol≈2.31×10−2 pmoln_v = 2.3097 \times 10^{-14}\text{ mol} \cdot 10^{12}\text{ pmol/mol} \approx 2.31 \times 10^{-2}\text{ pmol}

Part (b): Required Mass of the Insert for a 4.00:14.00:1 Molar Ratio

  1. Calculate the required picomoles of insert: The protocol specifies a molar ratio of 4.00:14.00:1 (insert to vector): ni=4.00⋅nv=4.00⋅(2.3097×10−2 pmol)≈9.2388×10−2 pmoln_i = 4.00 \cdot n_v = 4.00 \cdot (2.3097 \times 10^{-2}\text{ pmol}) \approx 9.2388 \times 10^{-2}\text{ pmol}
  2. Calculate the molecular weight of the insert: The insert length is 1.40 kb=1,400 bp1.40\text{ kb} = 1{,}400\text{ bp}: Mi=1,400 bp⋅660 g/(mol⋅bp)=9.24×105 g/molM_i = 1{,}400\text{ bp} \cdot 660\text{ g}/(\text{mol}\cdot\text{bp}) = 9.24 \times 10^5\text{ g/mol}
  3. Calculate the required mass in nanograms (ng\text{ng}): Using the unit conversion 1 g/mol=10−3 ng/pmol1\text{ g/mol} = 10^{-3}\text{ ng/pmol} (or equivalently, 1 ng/pmol=1,000 g/mol1\text{ ng/pmol} = 1{,}000\text{ g/mol}): Mi=924 ng/pmolM_i = 924\text{ ng/pmol} Massi=ni⋅Mi=(9.2388×10−2 pmol)⋅924 ng/pmol≈85.4 ng\text{Mass}_i = n_i \cdot M_i = (9.2388 \times 10^{-2}\text{ pmol}) \cdot 924\text{ ng/pmol} \approx 85.4\text{ ng}

Alternative direct method:
Because mass is proportional to both molar amount and DNA length, the insert mass can be calculated directly by: Massi=Massv⋅(LengthiLengthv)⋅(ninv)=125 ng⋅(1.40 kb8.20 kb)⋅4.00≈85.4 ng\text{Mass}_i = \text{Mass}_v \cdot \left(\frac{\text{Length}_i}{\text{Length}_v}\right) \cdot \left(\frac{n_i}{n_v}\right) = 125\text{ ng} \cdot \left(\frac{1.40\text{ kb}}{8.20\text{ kb}}\right) \cdot 4.00 \approx 85.4\text{ ng}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the insert-to-vector molar ratio with a mass ratio and directly applies 4.00:1 to the 125 ng of vector.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    MW vector=8200 bp×660 g/(mol⋅bp)=5.412×106 g/mol  ⟹  pmol vector=125×10−9 g5.412×106 g/mol×1012 pmol/mol=0.0231 pmol\text{MW vector} = 8200\text{ bp} \times 660\text{ g}/(\text{mol}\cdot\text{bp}) = 5.412 \times 10^6\text{ g/mol} \implies \text{pmol vector} = \frac{125 \times 10^{-9}\text{ g}}{5.412 \times 10^6\text{ g/mol}} \times 10^{12}\text{ pmol/mol} = 0.0231\text{ pmol}

  2. Step 2

    Mass ratio insert:vector=4.00:1  ⟹  Mass of insert=4.00×125 ng=500 ng\text{Mass ratio insert:vector} = 4.00:1 \implies \text{Mass of insert} = 4.00 \times 125\text{ ng} = 500\text{ ng}

    Correct

    ni=4.00×nv=4.00×0.0231 pmol=0.0924 pmol  ⟹  Massi=0.0924 pmol×(1,400 bp×660 ng/(pmol⋅kbp))=85.4 ngn_i = 4.00 \times n_v = 4.00 \times 0.0231\text{ pmol} = 0.0924\text{ pmol} \implies \text{Mass}_i = 0.0924\text{ pmol} \times (1{,}400\text{ bp} \times 660\text{ ng}/(\text{pmol}\cdot\text{kbp})) = 85.4\text{ ng}

    You treated the 4.00:14.00:1 insert-to-vector ratio as a mass ratio. Molar ratio refers to the relative number of DNA molecules (ni:nv=4.00:1n_i : n_v = 4.00 : 1), not their mass. Because the insert (1.40 kb1.40\text{ kb}) is much shorter and lighter than the vector (8.20 kb8.20\text{ kb}), 44 times as many molecules does not equate to 44 times the mass.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the double-stranded DNA molecular weight of the vector using 660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp}).

You accurately carried out unit conversions between grams, nanograms, moles, and picomoles to get 0.0231 pmol0.0231\text{ pmol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing molar ratio with mass ratio in DNA ligation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that a 4.00:1 molar ratio translates directly to multiplying the mass by 4.00, overlooking that fragments of different lengths have different molar masses and that molar ratios govern molecule counts rather than mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Molar Ratio vs. Mass Ratio
  • In molecular biology, a ligation ratio (e.g., 4:14:1 insert:vector) always denotes mole-to-mole numbers of fragment ends, not weight-to-weight mass.

  • First calculate required insert moles (ni=4.00×nvn_i = 4.00 \times n_v), then convert moles to mass using the insert's molecular weight, or apply Massi=Massv×(LengthiLengthv)×(ninv)\text{Mass}_i = \text{Mass}_v \times \left(\frac{\text{Length}_i}{\text{Length}_v}\right) \times \left(\frac{n_i}{n_v}\right).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate required insert picomoles: ni=4.00×0.0231 pmol=0.0924 pmoln_i = 4.00 \times 0.0231\text{ pmol} = 0.0924\text{ pmol}.

  2. Determine the insert molecular weight: Mi=1,400 bp×660 g/(mol⋅bp)=9.24×105 g/mol=924 ng/pmolM_i = 1{,}400\text{ bp} \times 660\text{ g}/(\text{mol}\cdot\text{bp}) = 9.24 \times 10^5\text{ g/mol} = 924\text{ ng/pmol}.

  3. Compute required insert mass: Massi=0.0924 pmol×924 ng/pmol≈85.4 ng\text{Mass}_i = 0.0924\text{ pmol} \times 924\text{ ng/pmol} \approx 85.4\text{ ng}.

Final answer

(a) 2.31×10−2 pmol2.31 \times 10^{-2}\text{ pmol}; (b) 85.4 ng85.4\text{ ng}

NEXT STEPS
Final Takeaways from Your Teacher
  • When planning DNA ligation reactions, always label whether a given ratio is molar (nn) or mass (mm).

  • Use the proportional formula Massi=Massv×kbikbv×(molar ratio)\text{Mass}_i = \text{Mass}_v \times \frac{\text{kb}_i}{\text{kb}_v} \times (\text{molar ratio}) as a quick sanity check to ensure shorter inserts require less mass per mole.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the molar ratio as 1:4.00 (vector to insert ratio inverted) when calculating the required insert amount.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    MW vector=8200×660=5.412×106 g/mol  ⟹  Amount vector=125 ng5.412×103 ng/pmol=0.0231 pmol\text{MW vector} = 8200 \times 660 = 5.412 \times 10^6\text{ g/mol} \implies \text{Amount vector} = \frac{125\text{ ng}}{5.412 \times 10^3\text{ ng/pmol}} = 0.0231\text{ pmol}

  2. Step 2

    Amount insert=0.0231 pmol4.00=0.005775 pmol\text{Amount insert} = \frac{0.0231\text{ pmol}}{4.00} = 0.005775\text{ pmol}

    Correct

    ni=4.00×nv=4.00×0.0231 pmol≈0.0924 pmoln_i = 4.00 \times n_v = 4.00 \times 0.0231\text{ pmol} \approx 0.0924\text{ pmol}

    A 4.00:14.00:1 molar ratio of insert to vector means there must be 44 times as many moles of insert as vector (ni/nv=4.00/1n_i / n_v = 4.00 / 1). You divided by 4.004.00 instead of multiplying, which corresponds to a 1:41:4 insert-to-vector ratio.

  3. Step 3

    MW insert=1400 bp×660 g/(mol⋅bp)=9.24×105 g/mol=924 ng/pmol\text{MW insert} = 1400\text{ bp} \times 660\text{ g/(mol}\cdot\text{bp)} = 9.24 \times 10^5\text{ g/mol} = 924\text{ ng/pmol}

  4. Step 4

    Mass insert=0.005775 pmol×924 ng/pmol=5.34 ng\text{Mass insert} = 0.005775\text{ pmol} \times 924\text{ ng/pmol} = 5.34\text{ ng}

    Correct

    Massi=0.09239 pmol×924 ng/pmol≈85.4 ng\text{Mass}_i = 0.09239\text{ pmol} \times 924\text{ ng/pmol} \approx 85.4\text{ ng}

    Your mass calculation formula and multiplication were carried out correctly, but the numerical result is 1616 times too small due to the inverted insert amount from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molecular weights of both the vector and the insert using 660 g/(mol⋅bp)660\text{ g/(mol}\cdot\text{bp)}.

You used a very efficient unit conversion factor (1 g/mol=10−3 ng/pmol1\text{ g/mol} = 10^{-3}\text{ ng/pmol}) to calculate molar amounts directly in picomoles.

You correctly answered part (a) as 0.0231 pmol0.0231\text{ pmol}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted molar ratio in stoichiometry

You divided by the ratio coefficient 4.004.00 instead of multiplying the vector moles by 4.004.00.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the antecedent and consequent in ratio phrasing ('A:BA:B ratio of XX to YY'). A '4:14:1 molar ratio of insert to vector' requires ninsert:nvector=4:1n_{\text{insert}} : n_{\text{vector}} = 4 : 1, meaning ninsert=4×nvectorn_{\text{insert}} = 4 \times n_{\text{vector}}, not nvector/4n_{\text{vector}} / 4.

REASONING PATH
Your ACEpath teacher’s suggested approach
Ratio Definition Check
  • An 'A:BA:B ratio of XX to YY' is written algebraically as nXnY=AB\frac{n_X}{n_Y} = \frac{A}{B}.

  • Always write out ninsertnvector=41\frac{n_{\text{insert}}}{n_{\text{vector}}} = \frac{4}{1} and cross-multiply to get ninsert=4⋅nvectorn_{\text{insert}} = 4 \cdot n_{\text{vector}} before computing values.

Ligation Intuition Check
  • Ligation protocols require an excess of insert molecules over vector molecules to favor intermolecular joining over vector self-ligation.

  • Verify that your calculated insert moles (nin_i) are greater than your vector moles (nvn_v) whenever the ratio of insert to vector is greater than 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the molar ratio: ninv=4.001.00  ⟹  ni=4.00×nv\frac{n_i}{n_v} = \frac{4.00}{1.00} \implies n_i = 4.00 \times n_v.

  2. Calculate the required moles of insert: ni=4.00×2.3097×10−2 pmol≈9.239×10−2 pmoln_i = 4.00 \times 2.3097 \times 10^{-2}\text{ pmol} \approx 9.239 \times 10^{-2}\text{ pmol}.

  3. Multiply the insert amount by its molecular weight: Massi=9.239×10−2 pmol×924 ng/pmol≈85.4 ng\text{Mass}_i = 9.239 \times 10^{-2}\text{ pmol} \times 924\text{ ng/pmol} \approx 85.4\text{ ng}.

Final answer

(a) 2.31×10−2 pmol2.31 \times 10^{-2}\text{ pmol}; (b) 85.4 ng85.4\text{ ng}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the explicit ratio formula insertvector=ratio value1\frac{\text{insert}}{\text{vector}} = \frac{\text{ratio value}}{1} before substituting numbers.

  • Check that the calculated picomoles of insert exceed the picomoles of vector when an insert excess is specified.

  • Practice using the shortcut formula Massi=Massv×(SizeiSizev)×(ninv)\text{Mass}_i = \text{Mass}_v \times \left(\frac{\text{Size}_i}{\text{Size}_v}\right) \times \left(\frac{n_i}{n_v}\right) to cross-check ligation mass calculations.

OverviewACEpath Teacher's Diagnosis

03 The student uses the single-stranded nucleotide molecular weight of 330 g/(mol·nt) instead of the double-stranded base pair value of 660 g/(mol·bp).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    MW vector=8200 bp×330 g/(mol⋅bp)=2.706×106 g/mol  ⟹  pmol vector=125 ng/(2.706×103 ng/pmol)=0.0462 pmol\text{MW vector} = 8200\text{ bp} \times 330\text{ g}/(\text{mol}\cdot\text{bp}) = 2.706 \times 10^6\text{ g/mol} \implies \text{pmol vector} = 125\text{ ng} / (2.706 \times 10^3\text{ ng/pmol}) = 0.0462\text{ pmol}

    Correct

    MWv=8200 bp×660 g/(mol⋅bp)=5.412×106 g/mol  ⟹  nv=125×10−9 g5.412×106 g/mol×1012 pmol/mol≈2.31×10−2 pmol\text{MW}_v = 8200\text{ bp} \times 660\text{ g}/(\text{mol}\cdot\text{bp}) = 5.412 \times 10^6\text{ g/mol} \implies n_v = \frac{125 \times 10^{-9}\text{ g}}{5.412 \times 10^6\text{ g/mol}} \times 10^{12}\text{ pmol/mol} \approx 2.31 \times 10^{-2}\text{ pmol}

    You used 330 g/(mol⋅bp)330\text{ g}/(\text{mol}\cdot\text{bp}) instead of the problem-specified value of 660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp}) for a double-stranded DNA base pair. Because the vector is double-stranded, each base pair consists of two nucleotides, so the molar mass is doubled and the resulting molar quantity should be 2.31×10−2 pmol2.31 \times 10^{-2}\text{ pmol}.

  2. Step 2

    pmol insert=4.00×0.0462 pmol=0.1848 pmol  ⟹  MW insert=1400 bp×330 g/(mol⋅bp)=4.62×105 g/mol=462 ng/pmol\text{pmol insert} = 4.00 \times 0.0462\text{ pmol} = 0.1848\text{ pmol} \implies \text{MW insert} = 1400\text{ bp} \times 330\text{ g}/(\text{mol}\cdot\text{bp}) = 4.62 \times 10^5\text{ g/mol} = 462\text{ ng/pmol}

    Correct

    ni=4.00×(2.31×10−2 pmol)≈9.24×10−2 pmol  ⟹  MWi=1400 bp×660 g/(mol⋅bp)=924 ng/pmoln_i = 4.00 \times (2.31 \times 10^{-2}\text{ pmol}) \approx 9.24 \times 10^{-2}\text{ pmol} \implies \text{MW}_i = 1400\text{ bp} \times 660\text{ g}/(\text{mol}\cdot\text{bp}) = 924\text{ ng/pmol}

    Your application of the 4.00:14.00:1 molar ratio is algebraically correct, but the numerical value carries forward the factor-of-two discrepancy from Step 1, along with the same 330 g/(mol⋅bp)330\text{ g}/(\text{mol}\cdot\text{bp}) constant.

  3. Step 3

    Mass insert=0.1848 pmol×462 ng/pmol=85.4 ng\text{Mass insert} = 0.1848\text{ pmol} \times 462\text{ ng/pmol} = 85.4\text{ ng}

    Correct

    Massi=9.24×10−2 pmol×924 ng/pmol≈85.4 ng\text{Mass}_i = 9.24 \times 10^{-2}\text{ pmol} \times 924\text{ ng/pmol} \approx 85.4\text{ ng}

    Because the insert picomole value was doubled (2×2\times) while the insert molecular weight was halved (12×\frac{1}{2}\times), the two factors of 22 canceled out, leading to the correct numerical answer of 85.4 ng85.4\text{ ng} despite the incorrect intermediate values.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted kilobases to base pairs for both the vector (8,200 bp8{,}200\text{ bp}) and the insert (1,400 bp1{,}400\text{ bp}).

You correctly applied the 4.00:14.00:1 insert-to-vector molar ratio.

You executed the unit conversions between grams per mole and nanograms per picomole flawlessly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Single-Stranded vs. Double-Stranded DNA Molecular Weight Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the average molar mass of a single-stranded nucleotide (330 g/(mol⋅nt)330\text{ g}/(\text{mol}\cdot\text{nt})) instead of standard double-stranded DNA (660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp})), doubling your calculated molar amounts.

REASONING PATH
Your ACEpath teacher’s suggested approach
dsDNA vs. ssDNA Molar Mass
  • For double-stranded DNA, average molecular weight is ≈660 g/(mol⋅bp)\approx 660\text{ g}/(\text{mol}\cdot\text{bp}). For single-stranded DNA/RNA, it is ≈330 g/(mol⋅nt)\approx 330\text{ g}/(\text{mol}\cdot\text{nt}).

  • Always verify whether the nucleic acid is double-stranded (bp) or single-stranded (nt) before choosing 660660 or 330 g/mol330\text{ g}/\text{mol}.

Unit Equivalence: g/mol to ng/pmol
  • 1 g/mol=109 ng1012 pmol=10−3 ng/pmol1\text{ g/mol} = \frac{10^9\text{ ng}}{10^{12}\text{ pmol}} = 10^{-3}\text{ ng/pmol}, meaning MW (in ng/pmol)=MW (in g/mol)1000\text{MW (in ng/pmol)} = \frac{\text{MW (in g/mol)}}{1000}.

  • Divide g/mol\text{g/mol} by 1,0001{,}000 to get ng/pmol\text{ng/pmol}, which simplifies mass calculations directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the vector molar mass using 660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp}): Mv=8,200 bp×660 g/(mol⋅bp)=5.412×106 g/molM_v = 8{,}200\text{ bp} \times 660\text{ g}/(\text{mol}\cdot\text{bp}) = 5.412 \times 10^6\text{ g/mol}.

  2. Compute vector picomoles: nv=125 ng5,412 ng/pmol≈2.31×10−2 pmoln_v = \frac{125\text{ ng}}{5{,}412\text{ ng/pmol}} \approx 2.31 \times 10^{-2}\text{ pmol}.

  3. Compute insert picomoles: ni=4.00×2.3097×10−2 pmol≈9.24×10−2 pmoln_i = 4.00 \times 2.3097 \times 10^{-2}\text{ pmol} \approx 9.24 \times 10^{-2}\text{ pmol}.

  4. Compute insert molar mass: Mi=1,400 bp×660 g/(mol⋅bp)=924 ng/pmolM_i = 1{,}400\text{ bp} \times 660\text{ g}/(\text{mol}\cdot\text{bp}) = 924\text{ ng/pmol}.

  5. Multiply to find insert mass: Massi=9.2388×10−2 pmol×924 ng/pmol≈85.4 ng\text{Mass}_i = 9.2388 \times 10^{-2}\text{ pmol} \times 924\text{ ng/pmol} \approx 85.4\text{ ng}.

Final answer

(a) 2.31×10−2 pmol2.31 \times 10^{-2}\text{ pmol}; (b) 85.4 ng85.4\text{ ng}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check given constants in the prompt text: the problem explicitly specified 660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp}).

  • Remember the physical meaning of a base pair: two complementary nucleotides bound together, roughly doubling the mass of an isolated nucleotide.

Lock it in

Similar question

01

A ligation reaction uses 100 ng100\text{ ng} of a 6.0 kb6.0\text{ kb} vector and requires a 3.0:13.0:1 molar ratio of a 1.2 kb1.2\text{ kb} insert. Calculate the required mass of the insert in nanograms.

Answer

Massi=100 ng×(1.2 kb6.0 kb)×3.0=100×0.20×3.0=60 ng\text{Mass}_i = 100\text{ ng} \times \left(\frac{1.2\text{ kb}}{6.0\text{ kb}}\right) \times 3.0 = 100 \times 0.20 \times 3.0 = 60\text{ ng}.

02

A researcher needs an exact 5.0:15.0:1 molar ratio of insert to vector. If 0.015 pmol0.015\text{ pmol} of an 8.0 kb8.0\text{ kb} vector is used with a 0.80 kb0.80\text{ kb} insert: (a) how many picomoles of insert are required, and (b) what is the insert mass in nanograms? (Use 660 g/(mol⋅bp)660\text{ g}/(\text{mol}\cdot\text{bp})).

Answer

(a) ni=5.0×0.015 pmol=0.075 pmoln_i = 5.0 \times 0.015\text{ pmol} = 0.075\text{ pmol}. (b) Molar mass of insert = 800 bp×660 g/(mol⋅bp)=5.28×105 g/mol=528 ng/pmol800\text{ bp} \times 660\text{ g}/(\text{mol}\cdot\text{bp}) = 5.28 \times 10^5\text{ g/mol} = 528\text{ ng/pmol}. Mass = 0.075 pmol×528 ng/pmol=39.6 ng0.075\text{ pmol} \times 528\text{ ng/pmol} = 39.6\text{ ng}.

03

In a cloning experiment, 150 ng150\text{ ng} of an unknown insert was accidentally added to 150 ng150\text{ ng} of a 9.0 kb9.0\text{ kb} vector, which unintentionally produced an exact 3.0:13.0:1 molar ratio of insert to vector. Determine the length of the insert in kilobases (kb\text{kb}).

Answer

Using mi=mv×(LiLv)×(ninv)m_i = m_v \times \left(\frac{L_i}{L_v}\right) \times \left(\frac{n_i}{n_v}\right): 150 ng=150 ng×(Li9.0 kb)×3.0  ⟹  1=3.0Li9.0  ⟹  Li=3.0 kb150\text{ ng} = 150\text{ ng} \times \left(\frac{L_i}{9.0\text{ kb}}\right) \times 3.0 \implies 1 = \frac{3.0 L_i}{9.0} \implies L_i = 3.0\text{ kb}.

Loading workspace…